[arch-commits] Commit in iwd/repos/community-x86_64 (6 files)

Christian Rebischke shibumi at archlinux.org
Wed Sep 9 16:31:46 UTC 2020


    Date: Wednesday, September 9, 2020 @ 16:31:46
  Author: shibumi
Revision: 701613

archrelease: copy trunk to community-x86_64

Added:
  iwd/repos/community-x86_64/ChangeLog
    (from rev 701612, iwd/trunk/ChangeLog)
  iwd/repos/community-x86_64/PKGBUILD
    (from rev 701612, iwd/trunk/PKGBUILD)
  iwd/repos/community-x86_64/iwd.install
    (from rev 701612, iwd/trunk/iwd.install)
Deleted:
  iwd/repos/community-x86_64/ChangeLog
  iwd/repos/community-x86_64/PKGBUILD
  iwd/repos/community-x86_64/iwd.install

-------------+
 ChangeLog   |  419 +++++++++++++++++++++++++++++-----------------------------
 PKGBUILD    |  104 +++++++-------
 iwd.install |   12 -
 3 files changed, 271 insertions(+), 264 deletions(-)

Deleted: ChangeLog
===================================================================
--- ChangeLog	2020-09-09 16:31:38 UTC (rev 701612)
+++ ChangeLog	2020-09-09 16:31:46 UTC (rev 701613)
@@ -1,206 +0,0 @@
-ver 1.8:
-	Fix issue with handling FT AKMs when not supported.
-	Fix issue with handling FILS and RSNE in authenticate.
-	Fix issue with handling auto-connection and quick scan.
-	Fix issue with sending multiple scan requests.
-	Add support for P2P feature and API.
-
-ver 1.7:
-	Fix issue with APs that send IGTK falsely in big endian.
-	Fix issue with setting linkmode & operstate for open networks.
-
-ver 1.6:
-	Fix issue with handling missing AP stop events.
-	Fix issue with handling out-of-order disconnect events.
-	Fix issue with handling missing auth/assoc support.
-	Fix issue with handling omitted EAP-TLS-CACert.
-	Fix issue with handling OWE PTK derivation.
-	Add support for internal frame exchange API.
-	Add support for MAC randomization and override.
-	Add support for per-network MAC addresses.
-
-ver 1.5:
-	Fix issue with handling missing NEW_WIPHY events.
-	Fix issue with interface creation and NEW_WIPHY events.
-	Fix issue with handling LastConnectedTime property change.
-	Fix issue with PEAPv0 interoperability with Windows.
-
-ver 1.4:
-	Fix issue with handling Crypto-Binding and invalid MACs.
-	Fix issue with handling change station error results.
-	Fix issue with handling DNS resolving installations.
-
-ver 1.3:
-	Fix issue with handling EAP-GTC and password requests.
-	Fix issue with handling Crypto-Binding TLV for PEAPv0.
-	Fix issue with handling key installation and PEAP Phase 2.
-	Fix issue with handling externally triggered scan requests.
-	Fix issue with handling RCPI calculation for RRM requests.
-
-ver 1.2:
-	Fix issue with handling scan requests while connecting.
-	Fix issue with handling scan duration for RRM requests.
-	Fix issue with handling parent TSF value for RRM requests.
-
-ver 1.1:
-	Fix issue with simple configuration support checks.
-	Fix issue with handling TLS tunnel and PEAPv0.
-	Add support for radio resource management.
-
-ver 1.0:
-	Add support for stable D-Bus interfaces.
-	Add support for network configuration documentation.
-
-ver 0.23:
-	Fix issue with strict certificate chain checks.
-	Fix issue with parsing RSNE_ADVANCE information.
-	Fix issue with parsing RSN information for WPA1.
-	Fix issue with logic error in scan frequency validation.
-	Fix issue with integer overflow and authentication frames.
-	Add support for installing various manual pages.
-
-ver 0.22:
-	Fix issue with hotplug and device capability detection.
-	Add support for IPv6 network configuration handling.
-	Add support for embedding certificates in profiles.
-
-ver 0.21:
-	Fix issue with cleartext ACK and tunneled EAP-Success.
-	Fix issue with setting bits in extended capabilities.
-	Fix issue with WPA-1 information element parsing.
-	Add support for handling QoS Map IE and frames.
-	Add support for STATE_DIRECTORY environment.
-	Add support for CONFIGURATION_DIRECTORY environment.
-
-ver 0.20:
-	Add support for adding Extended Capabilities bits.
-	Add support for ServerDomainMask configuration option.
-
-ver 0.19:
-	Add support for Hotspot 2.0 functionality.
-	Add support for FILS Fast Transition feature.
-	Add support for network configuration handling.
-	Add support for resolution services framework.
-
-ver 0.18:
-	Fix issue with handling stale scan results.
-	Fix issue with handling OWE group renegotiation.
-	Fix issue with handshake failures on FT-PSK.
-	Add support for FILS (Fast Initial Link Setup).
-
-ver 0.17:
-	Fix issue with handling association failure path.
-	Fix issue with handling checks for valid ECC point/scalar.
-	Fix issue with handling potential infinite loop and SAE.
-	Fix issue with handling randomization for passive scans.
-	Add support for randomization of SN for probe requests.
-	Add support for handling the FILS cipher suites.
-	Add support for ERP key caching feature.
-
-ver 0.16:
-	Add missing pkcs8.conf for module loading.
-
-ver 0.15:
-	Fix issue with handling RSSI thresholds.
-	Fix issue with handling abort for a connection.
-	Fix issue with stopping Access Point operation.
-	Add support for individual BSS blacklisting.
-	Add support for utilizing MAC randomization.
-	Add support for utilizing different key lengths.
-	Add support for 16, 24 and 32 byte MIC lengths.
-	Add support for handling driver rekying feature.
-
-ver 0.14:
-	Add support for tunneled MSCHAPv2 authentication.
-
-ver 0.13:
-	Fix issue with WSC interface runtime handling.
-	Add support for Opportunistic Wireless Encryption.
-	Add support for common EAP-TLS framework.
-
-ver 0.12:
-	Fix issue with handling 802.1x automatic connection.
-	Fix issue with handling missing support for backtrace.
-
-ver 0.11:
-	Fix issue with handling EAP-TTLS and redundant L flags.
-	Fix issue with handling EAP-TLS upper limit on request size.
-	Fix issue with handling handshake complete after setting keys.
-	Fix issue with handling access points with too many rates.
-	Fix issue with requiring PSK if passphrase is present.
-	Add support for retrieving list of hidden access points.
-	Add support for tunneled MS-CHAP.
-
-ver 0.10:
-	Fix issue with Ethernet authentication packet handling.
-	Fix issue with ad-hoc network scan results in station mode.
-	Fix issue with cancellation of ongoing rekey offload.
-	Add support for setting per-mac GTK credentials.
-	Add support for using external Embedded Linux library.
-
-ver 0.9:
-	Fix issue with handling EAP-WSC passwords.
-	Add support for TTLS-CHAP and TTLS-PAP.
-	Add support for handling FT over SAE.
-
-ver 0.8:
-	Fix issue with handling EAP_CACHE_NEVER secret types.
-	Fix issue with redundant usage of the L flag and PEAP.
-	Fix issue with EAP type 33 as termination mechanism for PEAPv1.
-	Add initial version of Ethernet authentication daemon.
-	Add support for Station mode interface.
-
-ver 0.7:
-	Fix issue with hard coded peer address and SAE networks.
-	Fix issue with raw passphrase requirement and SAE networks.
-	Fix issue with differentiating authenticator and supplicant.
-	Fix issue with timestamps comparison of known networks.
-	Fix issue with handling cancellation of power callbacks.
-	Fix issue with honoring auto-connect setting on power up.
-	Fix issue with crash during operstate callbacks.
-
-ver 0.6:
-	Fix issue with syncing the PSK on first connection.
-	Fix issue with unnecessary known object removal events.
-
-ver 0.5:
-	Fix issue with EAPoL handling and Ad-Hoc networks.
-	Add support for using agent with EAP-GTC methods.
-	Add support for improved Known Networks management.
-	Add support for Simultaneous Authentication of Equals.
-	Add support for exposing supported modes of operation.
-	Add support for D-Bus auto-activation via systemd.
-
-ver 0.4:
-	Fix issue with handling all zero PMKID.
-	Fix issue with handling PEAP servers and M bit requirement.
-	Fix issue with handling MS-CHAP v2 and uninitialized memory.
-	Fix issue with handling memory leak and aborting connections.
-	Fix issue with handling memory leak and PSK configuration.
-	Fix issue with handling not yet running D-Bus daemon.
-	Add support for advanced scanning of hidden networks.
-	Add support for MAC address randomization.
-	Add support for Ad-Hoc network interface.
-	Add support for Access Point interface.
-
-ver 0.3:
-	Fix issue with auto-connect settings for open networks.
-	Fix issue with handling beacon loss in roaming situations.
-	Fix issue with handling bridged wireless network interfaces.
-	Fix issue with handling EAP identity prompt or notification.
-	Fix issue with handling EAP state reset and reauthentication.
-	Add support for user specified hidden network connections.
-	Add support for configuring WDS / 4ADDR operation.
-
-ver 0.2:
-	Fix issue with unsupported bands from roam scan frequency set.
-	Fix issue with handling disconnect by AP and by SME events.
-	Fix issue with string start calculation for MS-CHAP v2.
-	Add workaround for 0 oper class in neighbor report.
-	Add support for EAPoL over NL80211 kernel feature.
-	Add support for EAP-PWD authentication method.
-	Add support for EAP-GTC authentication method.
-	Add support for agent functionality to client.
-
-ver 0.1:
-	Initial public release.

Copied: iwd/repos/community-x86_64/ChangeLog (from rev 701612, iwd/trunk/ChangeLog)
===================================================================
--- ChangeLog	                        (rev 0)
+++ ChangeLog	2020-09-09 16:31:46 UTC (rev 701613)
@@ -0,0 +1,213 @@
+ver 1.9:
+	Fix issue with WPA3 connections in transition mode.
+	Fix issue with handling roaming attempt failures.
+	Add support for radio management work queue.
+	Add support P2P service manager interface.
+	Add support for WiFi Display client API.
+
+ver 1.8:
+	Fix issue with handling FT AKMs when not supported.
+	Fix issue with handling FILS and RSNE in authenticate.
+	Fix issue with handling auto-connection and quick scan.
+	Fix issue with sending multiple scan requests.
+	Add support for P2P feature and API.
+
+ver 1.7:
+	Fix issue with APs that send IGTK falsely in big endian.
+	Fix issue with setting linkmode & operstate for open networks.
+
+ver 1.6:
+	Fix issue with handling missing AP stop events.
+	Fix issue with handling out-of-order disconnect events.
+	Fix issue with handling missing auth/assoc support.
+	Fix issue with handling omitted EAP-TLS-CACert.
+	Fix issue with handling OWE PTK derivation.
+	Add support for internal frame exchange API.
+	Add support for MAC randomization and override.
+	Add support for per-network MAC addresses.
+
+ver 1.5:
+	Fix issue with handling missing NEW_WIPHY events.
+	Fix issue with interface creation and NEW_WIPHY events.
+	Fix issue with handling LastConnectedTime property change.
+	Fix issue with PEAPv0 interoperability with Windows.
+
+ver 1.4:
+	Fix issue with handling Crypto-Binding and invalid MACs.
+	Fix issue with handling change station error results.
+	Fix issue with handling DNS resolving installations.
+
+ver 1.3:
+	Fix issue with handling EAP-GTC and password requests.
+	Fix issue with handling Crypto-Binding TLV for PEAPv0.
+	Fix issue with handling key installation and PEAP Phase 2.
+	Fix issue with handling externally triggered scan requests.
+	Fix issue with handling RCPI calculation for RRM requests.
+
+ver 1.2:
+	Fix issue with handling scan requests while connecting.
+	Fix issue with handling scan duration for RRM requests.
+	Fix issue with handling parent TSF value for RRM requests.
+
+ver 1.1:
+	Fix issue with simple configuration support checks.
+	Fix issue with handling TLS tunnel and PEAPv0.
+	Add support for radio resource management.
+
+ver 1.0:
+	Add support for stable D-Bus interfaces.
+	Add support for network configuration documentation.
+
+ver 0.23:
+	Fix issue with strict certificate chain checks.
+	Fix issue with parsing RSNE_ADVANCE information.
+	Fix issue with parsing RSN information for WPA1.
+	Fix issue with logic error in scan frequency validation.
+	Fix issue with integer overflow and authentication frames.
+	Add support for installing various manual pages.
+
+ver 0.22:
+	Fix issue with hotplug and device capability detection.
+	Add support for IPv6 network configuration handling.
+	Add support for embedding certificates in profiles.
+
+ver 0.21:
+	Fix issue with cleartext ACK and tunneled EAP-Success.
+	Fix issue with setting bits in extended capabilities.
+	Fix issue with WPA-1 information element parsing.
+	Add support for handling QoS Map IE and frames.
+	Add support for STATE_DIRECTORY environment.
+	Add support for CONFIGURATION_DIRECTORY environment.
+
+ver 0.20:
+	Add support for adding Extended Capabilities bits.
+	Add support for ServerDomainMask configuration option.
+
+ver 0.19:
+	Add support for Hotspot 2.0 functionality.
+	Add support for FILS Fast Transition feature.
+	Add support for network configuration handling.
+	Add support for resolution services framework.
+
+ver 0.18:
+	Fix issue with handling stale scan results.
+	Fix issue with handling OWE group renegotiation.
+	Fix issue with handshake failures on FT-PSK.
+	Add support for FILS (Fast Initial Link Setup).
+
+ver 0.17:
+	Fix issue with handling association failure path.
+	Fix issue with handling checks for valid ECC point/scalar.
+	Fix issue with handling potential infinite loop and SAE.
+	Fix issue with handling randomization for passive scans.
+	Add support for randomization of SN for probe requests.
+	Add support for handling the FILS cipher suites.
+	Add support for ERP key caching feature.
+
+ver 0.16:
+	Add missing pkcs8.conf for module loading.
+
+ver 0.15:
+	Fix issue with handling RSSI thresholds.
+	Fix issue with handling abort for a connection.
+	Fix issue with stopping Access Point operation.
+	Add support for individual BSS blacklisting.
+	Add support for utilizing MAC randomization.
+	Add support for utilizing different key lengths.
+	Add support for 16, 24 and 32 byte MIC lengths.
+	Add support for handling driver rekying feature.
+
+ver 0.14:
+	Add support for tunneled MSCHAPv2 authentication.
+
+ver 0.13:
+	Fix issue with WSC interface runtime handling.
+	Add support for Opportunistic Wireless Encryption.
+	Add support for common EAP-TLS framework.
+
+ver 0.12:
+	Fix issue with handling 802.1x automatic connection.
+	Fix issue with handling missing support for backtrace.
+
+ver 0.11:
+	Fix issue with handling EAP-TTLS and redundant L flags.
+	Fix issue with handling EAP-TLS upper limit on request size.
+	Fix issue with handling handshake complete after setting keys.
+	Fix issue with handling access points with too many rates.
+	Fix issue with requiring PSK if passphrase is present.
+	Add support for retrieving list of hidden access points.
+	Add support for tunneled MS-CHAP.
+
+ver 0.10:
+	Fix issue with Ethernet authentication packet handling.
+	Fix issue with ad-hoc network scan results in station mode.
+	Fix issue with cancellation of ongoing rekey offload.
+	Add support for setting per-mac GTK credentials.
+	Add support for using external Embedded Linux library.
+
+ver 0.9:
+	Fix issue with handling EAP-WSC passwords.
+	Add support for TTLS-CHAP and TTLS-PAP.
+	Add support for handling FT over SAE.
+
+ver 0.8:
+	Fix issue with handling EAP_CACHE_NEVER secret types.
+	Fix issue with redundant usage of the L flag and PEAP.
+	Fix issue with EAP type 33 as termination mechanism for PEAPv1.
+	Add initial version of Ethernet authentication daemon.
+	Add support for Station mode interface.
+
+ver 0.7:
+	Fix issue with hard coded peer address and SAE networks.
+	Fix issue with raw passphrase requirement and SAE networks.
+	Fix issue with differentiating authenticator and supplicant.
+	Fix issue with timestamps comparison of known networks.
+	Fix issue with handling cancellation of power callbacks.
+	Fix issue with honoring auto-connect setting on power up.
+	Fix issue with crash during operstate callbacks.
+
+ver 0.6:
+	Fix issue with syncing the PSK on first connection.
+	Fix issue with unnecessary known object removal events.
+
+ver 0.5:
+	Fix issue with EAPoL handling and Ad-Hoc networks.
+	Add support for using agent with EAP-GTC methods.
+	Add support for improved Known Networks management.
+	Add support for Simultaneous Authentication of Equals.
+	Add support for exposing supported modes of operation.
+	Add support for D-Bus auto-activation via systemd.
+
+ver 0.4:
+	Fix issue with handling all zero PMKID.
+	Fix issue with handling PEAP servers and M bit requirement.
+	Fix issue with handling MS-CHAP v2 and uninitialized memory.
+	Fix issue with handling memory leak and aborting connections.
+	Fix issue with handling memory leak and PSK configuration.
+	Fix issue with handling not yet running D-Bus daemon.
+	Add support for advanced scanning of hidden networks.
+	Add support for MAC address randomization.
+	Add support for Ad-Hoc network interface.
+	Add support for Access Point interface.
+
+ver 0.3:
+	Fix issue with auto-connect settings for open networks.
+	Fix issue with handling beacon loss in roaming situations.
+	Fix issue with handling bridged wireless network interfaces.
+	Fix issue with handling EAP identity prompt or notification.
+	Fix issue with handling EAP state reset and reauthentication.
+	Add support for user specified hidden network connections.
+	Add support for configuring WDS / 4ADDR operation.
+
+ver 0.2:
+	Fix issue with unsupported bands from roam scan frequency set.
+	Fix issue with handling disconnect by AP and by SME events.
+	Fix issue with string start calculation for MS-CHAP v2.
+	Add workaround for 0 oper class in neighbor report.
+	Add support for EAPoL over NL80211 kernel feature.
+	Add support for EAP-PWD authentication method.
+	Add support for EAP-GTC authentication method.
+	Add support for agent functionality to client.
+
+ver 0.1:
+	Initial public release.

Deleted: PKGBUILD
===================================================================
--- PKGBUILD	2020-09-09 16:31:38 UTC (rev 701612)
+++ PKGBUILD	2020-09-09 16:31:46 UTC (rev 701613)
@@ -1,52 +0,0 @@
-# Maintainer : Christian Rebischke <chris.rebischke at archlinux.org>
-# Maintainer: Levente Polyak <anthraxx[at]archlinux[dot]org>
-# Contributor: AndyRTR <andyrtr at archlinux.org>
-
-pkgname=iwd
-pkgver=1.8
-pkgrel=1
-pkgdesc='Internet Wireless Daemon'
-arch=('x86_64')
-url='https://git.kernel.org/cgit/network/wireless/iwd.git/'
-license=('LGPL')
-depends=('glibc' 'readline' 'libreadline.so')
-makedepends=('python-docutils' 'dbus' 'systemd')
-backup=(etc/iwd/main.conf)
-source=("https://www.kernel.org/pub/linux/network/wireless/iwd-${pkgver}.tar"{.xz,.sign})
-sha512sums=('f1caa330b3ff18b4598efec596a4b9a22887833218a90d19d59717503679eff71fdb990cb63bd74b8f1523197a366cd803d799259e8002e5cde2745b03d51d8e'
-            'SKIP')
-validpgpkeys=('E932D120BC2AEC444E558F0106CA9F5D1DCF2659')
-changelog=ChangeLog
-install=iwd.install
-
-build() {
-  cd ${pkgname}-${pkgver}
-	dbus-run-session ./configure --prefix=/usr \
-	--sysconfdir=/etc \
-	--localstatedir=/var \
-  --with-runstatedir=/run \
-	--libexecdir=/usr/lib/iwd \
-	--enable-wired \
-	--enable-ofono \
-	--enable-sim-hardcoded \
-	--enable-hwsim \
-	--disable-tools
-  make
-}
-
-check() {
-  cd ${pkgname}-${pkgver}
-  # pass broken tests - should reported upstream
-  # One test fail because we need kernel capabilities that
-  # we don't have inside of systemd-nspawn
-  # this could only be fixed via changing our build environment
-  make -k check || /bin/true
-}
-
-package() {
-  cd ${pkgname}-${pkgver}
-  make install DESTDIR="${pkgdir}"
-  install -Dm 644 README -t "${pkgdir}/usr/share/doc/${pkgname}"
-}
-
-# vim: ts=2 sw=2 et:

Copied: iwd/repos/community-x86_64/PKGBUILD (from rev 701612, iwd/trunk/PKGBUILD)
===================================================================
--- PKGBUILD	                        (rev 0)
+++ PKGBUILD	2020-09-09 16:31:46 UTC (rev 701613)
@@ -0,0 +1,52 @@
+# Maintainer : Christian Rebischke <chris.rebischke at archlinux.org>
+# Maintainer: Levente Polyak <anthraxx[at]archlinux[dot]org>
+# Contributor: AndyRTR <andyrtr at archlinux.org>
+
+pkgname=iwd
+pkgver=1.9
+pkgrel=1
+pkgdesc='Internet Wireless Daemon'
+arch=('x86_64')
+url='https://git.kernel.org/cgit/network/wireless/iwd.git/'
+license=('LGPL')
+depends=('glibc' 'readline' 'libreadline.so')
+makedepends=('python-docutils' 'dbus' 'systemd')
+backup=(etc/iwd/main.conf)
+source=("https://www.kernel.org/pub/linux/network/wireless/iwd-${pkgver}.tar"{.xz,.sign})
+sha512sums=('d8762495f7f5a342476653c0cf64c31b3b41a3064a05c4fcf49b9faf4394b0d7a5db6aae6324896bdc8f7b104697fb4c4315f7073a4fde4fc87f8f55d932538b'
+            'SKIP')
+validpgpkeys=('E932D120BC2AEC444E558F0106CA9F5D1DCF2659')
+changelog=ChangeLog
+install=iwd.install
+
+build() {
+  cd ${pkgname}-${pkgver}
+	dbus-run-session ./configure --prefix=/usr \
+	--sysconfdir=/etc \
+	--localstatedir=/var \
+  --with-runstatedir=/run \
+	--libexecdir=/usr/lib/iwd \
+	--enable-wired \
+	--enable-ofono \
+	--enable-sim-hardcoded \
+	--enable-hwsim \
+	--disable-tools
+  make
+}
+
+check() {
+  cd ${pkgname}-${pkgver}
+  # pass broken tests - should reported upstream
+  # One test fail because we need kernel capabilities that
+  # we don't have inside of systemd-nspawn
+  # this could only be fixed via changing our build environment
+  make -k check || /bin/true
+}
+
+package() {
+  cd ${pkgname}-${pkgver}
+  make install DESTDIR="${pkgdir}"
+  install -Dm 644 README -t "${pkgdir}/usr/share/doc/${pkgname}"
+}
+
+# vim: ts=2 sw=2 et:

Deleted: iwd.install
===================================================================
--- iwd.install	2020-09-09 16:31:38 UTC (rev 701612)
+++ iwd.install	2020-09-09 16:31:46 UTC (rev 701613)
@@ -1,6 +0,0 @@
-post_upgrade() {
-  if (($(vercmp 0.20-3 $2) > 0)); then
-    chmod 700 /var/lib/ead/
-    chmod 700 /var/lib/iwd/
-  fi
-}

Copied: iwd/repos/community-x86_64/iwd.install (from rev 701612, iwd/trunk/iwd.install)
===================================================================
--- iwd.install	                        (rev 0)
+++ iwd.install	2020-09-09 16:31:46 UTC (rev 701613)
@@ -0,0 +1,6 @@
+post_upgrade() {
+  if (($(vercmp 0.20-3 $2) > 0)); then
+    chmod 700 /var/lib/ead/
+    chmod 700 /var/lib/iwd/
+  fi
+}


More information about the arch-commits mailing list