[arch-commits] Commit in kicad/trunk (PKGBUILD)

[Filipe Laíns]

    Date: Thursday, December 30, 2021 @ 00:40:07
  Author: ffy00
Revision: 1088062

upgpkg: kicad 6.0.0-2

Modified:
  kicad/trunk/PKGBUILD

----------+
 PKGBUILD |   53 ++++++++++++++++++++++++-----------------------------
 1 file changed, 24 insertions(+), 29 deletions(-)

Modified: PKGBUILD
===================================================================
--- PKGBUILD	2021-12-30 00:39:49 UTC (rev 1088061)
+++ PKGBUILD	2021-12-30 00:40:07 UTC (rev 1088062)
@@ -1,47 +1,42 @@
-# Maintainer: Kyle Keen <keenerd at gmail.com>
-# Maintainer: George Rawlinson <grawlinson at archlinux.org>
-# Contributor: Marq Schneider <queueRAM at gmail.com>
-# Contributor: Nick Østergaard
+# Maintainer: Filipe Laíns <lains at archlinux.org>
+# Contributor: Rachel Mant <aur at dragonmux.network>
 
 pkgname=kicad
 pkgver=6.0.0
-pkgrel=1
-pkgdesc="Electronic schematic and printed circuit board (PCB) design tools"
+pkgrel=2
+pkgdesc='Electronic schematic and printed circuit board (PCB) design tools'
 arch=('x86_64')
-url="https://www.kicad.org"
+url='http://kicad.org/'
 license=('GPL')
-depends=('wxgtk3' 'python' 'boost-libs' 'glew' 'curl' 'glm' 'ngspice' 'opencascade' 'python-wxpython' 'libcloudproviders')
-# can ngspice/opencascade be an optdep?
-# opencascade vs community edition?
-makedepends=('cmake' 'zlib' 'mesa' 'boost' 'swig')
+depends=('wxgtk3' 'python' 'boost-libs' 'glew' 'curl' 'glm' 'ngspice' 'opencascade' 'python-wxpython')
+makedepends=('cmake' 'mesa' 'boost' 'swig' 'ninja')
 optdepends=('kicad-library: for footprints and symbols'
             'kicad-library-3d: for 3d models of components')
-source=("https://gitlab.com/kicad/code/kicad/-/archive/$pkgver/kicad-$pkgver.tar.gz")
-sha512sums=('1cadf59cfa85c5bbeb86f968ced896eff16c330e498497bf58826a58a59dfb83989422d660f7230d7921eeeda709d1ff10b50d4f842a36e50d44bf9017360b50')
-b2sums=('4ea4075cd8e860ed19ee051be3567400c57f8c1b51550d2da80525ef65cc0b6c0951bac8c306c4fc19bddd824e2b727f416817ea4006a67f949dbf70df673a37')
+source=("https://gitlab.com/kicad/code/kicad/-/archive/$pkgver/kicad-$pkgver.tar.bz2")
+sha512sums=('1267b7cd35a63a3f26c2e9b0695722cbb9b279d1326f52f0b8497bd3011d79a5732e6da27f6413fb72064fe2aca72da95252011c6cb0b70c209f296f40a77b90')
 
-build() {
-  cmake \
-    -B build \
-    -S "$pkgname-$pkgver" \
+build()
+{
+  mkdir $pkgname-$pkgver/build
+  cd $pkgname-$pkgver/build
+
+  cmake .. -G Ninja \
     -DCMAKE_BUILD_TYPE=Release \
     -DCMAKE_INSTALL_PREFIX=/usr \
     -DCMAKE_INSTALL_LIBDIR=lib \
-    -DKICAD_USE_OCE=OFF \
     -DKICAD_USE_OCC=ON \
-    -DKICAD_SCRIPTING=ON \
-    -DKICAD_SCRIPTING_PYTHON3=ON \
-    -DKICAD_SCRIPTING_MODULES=ON \
     -DKICAD_SCRIPTING_WXPYTHON=ON \
-    -DKICAD_SCRIPTING_ACTION_MENU=ON \
-    -DKICAD_SCRIPTING_WXPYTHON_PHOENIX=ON \
     -DwxWidgets_CONFIG_EXECUTABLE=/usr/bin/wx-config-gtk3 \
-    -DCMAKE_SKIP_RPATH=ON \
-    -DBUILD_GITHUB_PLUGIN=ON
+    -Wno-dev
 
-  cmake --build build
+  ninja
 }
 
-package() {
-  DESTDIR="$pkgdir" cmake --install build
+package()
+{
+  cd $pkgname-$pkgver/build
+
+  DESTDIR="$pkgdir" ninja install
 }
+
+# vim:set ts=2 sw=2 et: