[arch-general] Blanks screen after boot

Thomas Bächler thomas at archlinux.org
Fri Jul 9 09:58:54 EDT 2010


Am 09.07.2010 14:36, schrieb Philipp Überbacher:
> $ dmesg | grep -i -C3 error
> pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
> pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
> pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
> pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
> pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS
> pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: no _OSC support
> pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13
> pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS
> pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: no _OSC support
> pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13
> Linux agpgart interface v0.103
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

Okay, that is known, new in 2.6.34, and _should_ be harmless. Google for
"Failed to receive control of PCIe PME service: no _OSC support" for
details.

> PM: Starting manual resume from disk
> PM: Resume from partition 8:2
> PM: Checking hibernation image.
> PM: Error -22 checking image file
> PM: Resume from disk failed.
> EXT4-fs (sda3): mounted filesystem with ordered data mode
> rtc_cmos 00:09: RTC can wake from S4

Harmless, this only means that you didn't suspend to disk, and thus
cannot resume from disk.

> tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> eth0: no IPv6 routers present
> b43-phy0 ERROR: Fatal DMA error: 0x00000800, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
> b43-phy0 ERROR: This device does not support DMA on your system. Please use PIO instead.
> b43-phy0: Controller RESET (DMA error) ...
> b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
> b43-phy0: Controller restarted
> b43-phy0: Radio hardware status changed to DISABLED

Yes, I heard about that problem.

None of the above seems related to your i915 problem.

> I guess this would be GM965 then?
> 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
> 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
> 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
> 
> Thanks for advice.

Hm, yes, Xorg.0.log has more details about the exact chip ... there are
many 965-generation chips, and I don't pretend to know all of them.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://mailman.archlinux.org/pipermail/arch-general/attachments/20100709/7db55fd4/attachment-0001.bin>


More information about the arch-general mailing list