[arch-general] Xorg crashes

Peter Nabbefeld peter.nabbefeld at gmx.de
Tue Mar 13 10:58:08 UTC 2018


Hello all,

since yesterday, Xorg sometimes crashes unexpectedly. Please, see log below.

I'm not sure, but I'm using Firefox most time, and Xorg crashes while 
I'm using Firefox.

I'm no expert, but on a first glance, it seems to me like my touchpad 
accumulates mouse movements and so the input device gives the wrong 
coordinates to FF which in turn hands them to Xorg which leads to 
crashes. But of course, I may be totally wrong with this assumption.

Kind regards
Peter


[   213.002]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[   213.002] X Protocol Version 11, Revision 0
[   213.002] Build Operating System: Linux 4.14.12-1-ARCH x86_64
[   213.002] Current Operating System: Linux tuchola 4.15.8-1-ARCH #1
SMP PREEMPT Sat Mar 10 00:00:33 UTC 2018 x86_64
[   213.002] Kernel command line: BOOT_IMAGE=/vmlinuz-linux
root=UUID=e81ed24f-26ef-4220-832a-56c374907fb0 rw quiet
rcutree.rcu_idle_gp_delay=1
[   213.002] Build Date: 26 January 2018  10:25:18AM
[   213.002]
[   213.002] Current version of pixman: 0.34.0
[   213.002] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   213.002] Markers: (--) probed, (**) from config file, (==) default
setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   213.003] (==) Log file: "/home/peter/.local/share/xorg/Xorg.0.log",
Time: Mon Mar 12 14:49:32 2018
[   213.076] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   213.076] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   213.146] (==) No Layout section.  Using the first Screen section.
[   213.146] (==) No screen section available. Using defaults.
[   213.146] (**) |-->Screen "Default Screen Section" (0)
[   213.146] (**) |   |-->Monitor "<default monitor>"
[   213.168] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   213.168] (**) |   |-->Device "Intel Graphics"
[   213.168] (**) |   |-->GPUDevice "Nvidia card"
[   213.168] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   213.168] (==) Automatically adding devices
[   213.168] (==) Automatically enabling devices
[   213.168] (==) Automatically adding GPU devices
[   213.168] (==) Automatically binding GPU devices
[   213.168] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   213.222] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/100dpi/".
[   213.222] 	Entry deleted from font path.
[   213.222] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   213.222] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/75dpi/".
[   213.222] 	Entry deleted from font path.
[   213.222] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   213.222] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[   213.222] (==) ModulePath set to "/usr/lib/xorg/modules"
[   213.222] (II) The server relies on udev to provide the list of input
devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   213.222] (II) Loader magic: 0x55ed101fbd60
[   213.222] (II) Module ABI versions:
[   213.222] 	X.Org ANSI C Emulation: 0.4
[   213.222] 	X.Org Video Driver: 23.0
[   213.222] 	X.Org XInput driver : 24.1
[   213.222] 	X.Org Server Extension : 10.0
[   213.223] (++) using VT number 1

[   213.223] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   213.224] (II) systemd-logind: took control of session
/org/freedesktop/login1/session/c1
[   213.225] (II) xfree86: Adding drm device (/dev/dri/card1)
[   213.225] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11
paused 0
[   213.226] (II) xfree86: Adding drm device (/dev/dri/card0)
[   213.226] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12
paused 0
[   213.228] (--) PCI:*(0:0:2:0) 8086:0416:1558:7481 rev 6, Mem @
0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @
0x????????/131072
[   213.228] (--) PCI: (0:1:0:0) 10de:119a:1558:7481 rev 161, Mem @
0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @
0x0000e000/128, BIOS @ 0x????????/524288
[   213.228] (II) Open ACPI successful (/var/run/acpid.socket)
[   213.228] (II) LoadModule: "glx"
[   213.247] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   213.298] (II) Module glx: vendor="X.Org Foundation"
[   213.298] 	compiled for 1.19.6, module version = 1.0.0
[   213.298] 	ABI class: X.Org Server Extension, version 10.0
[   213.298] (II) LoadModule: "intel"
[   213.298] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   213.325] (II) Module intel: vendor="X.Org Foundation"
[   213.325] 	compiled for 1.19.6, module version = 2.99.917
[   213.325] 	Module class: X.Org Video Driver
[   213.325] 	ABI class: X.Org Video Driver, version 23.0
[   213.325] (II) LoadModule: "nouveau"
[   213.325] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   213.350] (II) Module nouveau: vendor="X.Org Foundation"
[   213.350] 	compiled for 1.19.3, module version = 1.0.15
[   213.350] 	Module class: X.Org Video Driver
[   213.350] 	ABI class: X.Org Video Driver, version 23.0
[   213.350] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   213.350] (II) intel: Driver for Intel(R) HD Graphics
[   213.350] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[   213.350] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[   213.350] (II) NOUVEAU driver
[   213.350] (II) NOUVEAU driver for NVIDIA chipset families :
[   213.350] 	RIVA TNT        (NV04)
[   213.350] 	RIVA TNT2       (NV05)
[   213.350] 	GeForce 256     (NV10)
[   213.350] 	GeForce 2       (NV11, NV15)
[   213.350] 	GeForce 4MX     (NV17, NV18)
[   213.350] 	GeForce 3       (NV20)
[   213.350] 	GeForce 4Ti     (NV25, NV28)
[   213.350] 	GeForce FX      (NV3x)
[   213.350] 	GeForce 6       (NV4x)
[   213.350] 	GeForce 7       (G7x)
[   213.350] 	GeForce 8       (G8x)
[   213.350] 	GeForce GTX 200 (NVA0)
[   213.350] 	GeForce GTX 400 (NVC0)
[   213.351] xf86EnableIOPorts: failed to set IOPL for I/O (Operation
not permitted)
[   213.366] (II) [drm] nouveau interface version: 1.3.1
[   213.366] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[   213.366] (II) intel(0): Creating default Display subsection in
Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   213.366] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   213.366] (==) intel(0): RGB weight 888
[   213.366] (==) intel(0): Default visual is TrueColor
[   213.366] (**) intel(0): Option "AccelMethod" "uxa"
[   213.366] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD
Graphics 4600
[   213.366] (**) intel(0): Relaxed fencing enabled
[   213.366] (**) intel(0): Wait on SwapBuffers? enabled
[   213.366] (**) intel(0): Triple buffering? enabled
[   213.366] (**) intel(0): Framebuffer tiled
[   213.366] (**) intel(0): Pixmaps tiled
[   213.366] (**) intel(0): 3D buffers tiled
[   213.366] (**) intel(0): SwapBuffers wait enabled
[   213.366] (==) intel(0): video overlay key set to 0x101fe
[   213.367] (II) intel(0): Output eDP1 has no monitor section
[   213.368] (--) intel(0): found backlight control interface
intel_backlight
[   213.368] (II) intel(0): Output DP1 has no monitor section
[   213.376] (II) intel(0): Output HDMI1 has no monitor section
[   213.384] (II) intel(0): Output HDMI2 has no monitor section
[   213.384] (II) intel(0): Output DP2 has no monitor section
[   213.392] (II) intel(0): Output HDMI3 has no monitor section
[   213.393] (II) intel(0): EDID for output eDP1
[   213.393] (II) intel(0): Manufacturer: CMO  Model: 1720  Serial#: 0
[   213.393] (II) intel(0): Year: 2011  Week: 2
[   213.393] (II) intel(0): EDID Version: 1.3
[   213.393] (II) intel(0): Digital Display Input
[   213.393] (II) intel(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[   213.393] (II) intel(0): Gamma: 2.20
[   213.393] (II) intel(0): No DPMS capabilities specified
[   213.393] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[   213.393] (II) intel(0): First detailed timing is preferred mode
[   213.393] (II) intel(0): redX: 0.640 redY: 0.333   greenX: 0.303
greenY: 0.613
[   213.393] (II) intel(0): blueX: 0.154 blueY: 0.060   whiteX: 0.313
whiteY: 0.329
[   213.393] (II) intel(0): Manufacturer's mask: 0
[   213.393] (II) intel(0): Supported detailed timing:
[   213.393] (II) intel(0): clock: 138.7 MHz   Image Size:  382 x 215 mm
[   213.393] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end
2000 h_blank_end 2080 h_border: 0
[   213.393] (II) intel(0): v_active: 1080  v_sync: 1083  v_sync_end
1088 v_blanking: 1111 v_border: 0
[   213.393] (II) intel(0):  N173HGE-L11
[   213.393] (II) intel(0):  CMO
[   213.393] (II) intel(0):  N173HGE-L11
[   213.393] (II) intel(0): EDID (in hex):
[   213.393] (II) intel(0): 	00ffffffffffff000daf201700000000
[   213.393] (II) intel(0): 	02150103802615780ad895a3554d9d27
[   213.393] (II) intel(0): 	0f505400000001010101010101010101
[   213.393] (II) intel(0): 	0101010101012e3680a070381f403020
[   213.393] (II) intel(0): 	35007ed710000018000000fe004e3137
[   213.393] (II) intel(0): 	334847452d4c31310a20000000fe0043
[   213.393] (II) intel(0): 	4d4f0a202020202020202020000000fe
[   213.393] (II) intel(0): 	004e3137334847452d4c31310a20006e
[   213.393] (II) intel(0): Not using default mode "320x240" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "400x300" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "400x300" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "512x384" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "640x480" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "640x512" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "800x600" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "896x672" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "928x696" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "960x720" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "700x525" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "1024x768"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "320x180" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "320x180" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "360x202" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "360x202" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "432x243" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "432x243" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "480x270" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "480x270" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "512x288" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "512x288" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "640x360" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "640x360" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "684x384" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "684x384" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "800x450" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "800x450" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "960x540" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "960x540" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "1024x576"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "1024x576"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "1280x720"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "1280x720"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "1440x810"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "1440x810"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "1600x900"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "1600x900"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "1920x1080"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "1920x1080"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "640x400" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "640x400" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "700x450" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "700x450" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "840x525" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "840x525" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "960x600" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "960x600" (doublescan
mode not supported)
[   213.393] (II) intel(0): Not using default mode "1280x800"
(doublescan mode not supported)
[   213.393] (II) intel(0): Not using default mode "1280x800"
(doublescan mode not supported)
[   213.393] (II) intel(0): Printing probed modes for output eDP1
[   213.393] (II) intel(0): Modeline "1920x1080"x60.0  138.70  1920 1968
2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[   213.393] (II) intel(0): Modeline "1920x1080"x60.0  173.00  1920 2048
2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[   213.393] (II) intel(0): Modeline "1920x1080"x59.9  138.50  1920 1968
2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[   213.393] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784
1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[   213.393] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728
1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[   213.393] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488
1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   213.393] (II) intel(0): Modeline "1600x900"x59.9  118.25  1600 1696
1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[   213.394] (II) intel(0): Modeline "1600x900"x59.8   97.50  1600 1648
1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[   213.394] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328
1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[   213.394] (II) intel(0): Modeline "1400x900"x60.0  103.50  1400 1480
1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[   213.394] (II) intel(0): Modeline "1400x900"x59.9   86.50  1400 1448
1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[   213.394] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376
1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   213.394] (II) intel(0): Modeline "1368x768"x59.9   85.25  1368 1440
1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[   213.394] (II) intel(0): Modeline "1368x768"x59.9   72.25  1368 1416
1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[   213.394] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352
1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[   213.394] (II) intel(0): Modeline "1280x800"x59.9   71.00  1280 1328
1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[   213.394] (II) intel(0): Modeline "1280x720"x59.9   74.50  1280 1344
1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[   213.394] (II) intel(0): Modeline "1280x720"x59.7   63.75  1280 1328
1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[   213.394] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048
1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   213.394] (II) intel(0): Modeline "1024x576"x59.9   46.50  1024 1064
1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[   213.394] (II) intel(0): Modeline "1024x576"x59.8   42.00  1024 1072
1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[   213.394] (II) intel(0): Modeline "960x540"x59.6   40.75  960 992
1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[   213.394] (II) intel(0): Modeline "960x540"x59.8   37.25  960 1008
1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[   213.394] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968
1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   213.394] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896
1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   213.394] (II) intel(0): Modeline "864x486"x59.9   32.50  864 888 968
1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[   213.394] (II) intel(0): Modeline "864x486"x59.6   30.50  864 912 944
1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[   213.394] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752
800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   213.394] (II) intel(0): Modeline "720x405"x59.5   22.50  720 744 808
896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[   213.394] (II) intel(0): Modeline "720x405"x59.0   21.75  720 768 800
880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[   213.394] (II) intel(0): Modeline "640x360"x59.8   18.00  640 664 720
800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[   213.394] (II) intel(0): Modeline "640x360"x59.3   17.75  640 688 720
800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[   213.394] (II) intel(0): EDID for output DP1
[   213.402] (II) intel(0): EDID for output HDMI1
[   213.410] (II) intel(0): EDID for output HDMI2
[   213.410] (II) intel(0): EDID for output DP2
[   213.419] (II) intel(0): EDID for output HDMI3
[   213.419] (II) intel(0): Output eDP1 connected
[   213.419] (II) intel(0): Output DP1 disconnected
[   213.419] (II) intel(0): Output HDMI1 disconnected
[   213.419] (II) intel(0): Output HDMI2 disconnected
[   213.419] (II) intel(0): Output DP2 disconnected
[   213.419] (II) intel(0): Output HDMI3 disconnected
[   213.419] (II) intel(0): Using exact sizes for initial modes
[   213.419] (II) intel(0): Output eDP1 using initial mode 1920x1080 +0+0
[   213.419] (II) intel(0): Kernel page flipping support detected, enabling
[   213.419] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[   213.419] (==) intel(0): DPI set to (96, 96)
[   213.419] (II) Loading sub module "fb"
[   213.419] (II) LoadModule: "fb"
[   213.419] (II) Loading /usr/lib/xorg/modules/libfb.so
[   213.433] (II) Module fb: vendor="X.Org Foundation"
[   213.433] 	compiled for 1.19.6, module version = 1.0.0
[   213.433] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   213.433] (II) Loading sub module "dri2"
[   213.433] (II) LoadModule: "dri2"
[   213.433] (II) Module "dri2" already built-in
[   213.433] (II) Loading sub module "dri3"
[   213.433] (II) LoadModule: "dri3"
[   213.433] (II) Module "dri3" already built-in
[   213.433] (II) Loading sub module "dri2"
[   213.433] (II) LoadModule: "dri2"
[   213.433] (II) Module "dri2" already built-in
[   213.433] (--) NOUVEAU(G0): Chipset: "NVIDIA NVE4"
[   213.433] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[   213.433] (==) NOUVEAU(G0): RGB weight 888
[   213.433] (==) NOUVEAU(G0): Default visual is TrueColor
[   213.433] (==) NOUVEAU(G0): Using HW cursor
[   213.433] (==) NOUVEAU(G0): Allowed maximum DRI level 2.
[   213.433] (==) NOUVEAU(G0): GLX sync to VBlank enabled.
[   213.433] (==) NOUVEAU(G0): Page flipping enabled
[   213.433] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]
[   213.433] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.
[   213.433] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)
[   213.433] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[   213.433] (**) NOUVEAU(G0):  Mode "1920x1080": 173.0 MHz (scaled from
0.0 MHz), 67.2 kHz, 60.0 Hz
[   213.433] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0  173.00  1920
2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[   213.433] (==) NOUVEAU(G0): DPI set to (96, 96)
[   213.433] (II) Loading sub module "fb"
[   213.433] (II) LoadModule: "fb"
[   213.433] (II) Loading /usr/lib/xorg/modules/libfb.so
[   213.434] (II) Module fb: vendor="X.Org Foundation"
[   213.434] 	compiled for 1.19.6, module version = 1.0.0
[   213.434] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   213.434] (II) Loading sub module "shadowfb"
[   213.434] (II) LoadModule: "shadowfb"
[   213.434] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[   213.438] (II) Module shadowfb: vendor="X.Org Foundation"
[   213.438] 	compiled for 1.19.6, module version = 1.0.0
[   213.438] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   213.438] (==) Depth 24 pixmap format is 32 bpp
[   213.697] (II) NOUVEAU(G0): Channel setup complete.
[   213.697] (II) NOUVEAU(G0): [COPY] async initialised.
[   213.717] (II) NOUVEAU(G0): Hardware support for Present enabled
[   213.717] (II) NOUVEAU(G0): [DRI2] Setup complete
[   213.717] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau
[   213.717] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau
[   213.717] (II) Loading sub module "exa"
[   213.717] (II) LoadModule: "exa"
[   213.717] (II) Loading /usr/lib/xorg/modules/libexa.so
[   213.732] (II) Module exa: vendor="X.Org Foundation"
[   213.732] 	compiled for 1.19.6, module version = 2.6.0
[   213.732] 	ABI class: X.Org Video Driver, version 23.0
[   213.732] (II) EXA(256): Driver allocated offscreen pixmaps
[   213.732] (II) EXA(256): Driver registered support for the following
operations:
[   213.732] (II)         Solid
[   213.732] (II)         Copy
[   213.732] (II)         Composite (RENDER acceleration)
[   213.732] (II)         UploadToScreen
[   213.732] (II)         DownloadFromScreen
[   213.732] (==) NOUVEAU(G0): Backing store enabled
[   213.732] (==) NOUVEAU(G0): Silken mouse enabled
[   213.732] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce
8/9 Textured Video.
[   213.732] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[   213.732] (==) NOUVEAU(G0): DPMS enabled
[   213.732] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[   213.733] (II) intel(0): Allocated new frame buffer 1920x1080 stride
7680, tiled
[   213.734] (II) UXA(0): Driver registered support for the following
operations:
[   213.734] (II)         solid
[   213.734] (II)         copy
[   213.734] (II)         composite (RENDER acceleration)
[   213.734] (II)         put_image
[   213.734] (II)         get_image
[   213.734] (II) intel(0): [DRI2] Setup complete
[   213.734] (II) intel(0): [DRI2]   DRI driver: i965
[   213.734] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[   213.734] (==) intel(0): Backing store enabled
[   213.734] (==) intel(0): Silken mouse enabled
[   213.734] (II) intel(0): Initializing HW Cursor
[   213.734] (II) intel(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[   213.734] (==) intel(0): DPMS enabled
[   213.734] (==) intel(0): Intel XvMC decoder enabled
[   213.734] (II) intel(0): Set up textured video
[   213.734] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   213.734] (II) intel(0): DRI2: Enabled
[   213.734] (II) intel(0): DRI3: Enabled
[   213.734] (==) intel(0): hotplug detection: "enabled"
[   213.767] (--) RandR disabled
[   214.004] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   214.004] (II) AIGLX: enabled GLX_ARB_create_context
[   214.004] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   214.004] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[   214.004] (II) AIGLX: enabled GLX_INTEL_swap_event
[   214.004] (II) AIGLX: enabled GLX_SGI_swap_control
[   214.004] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   214.004] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   214.004] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[   214.004] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
objects
[   214.004] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   214.004] (II) AIGLX: Loaded and initialized i965
[   214.004] (II) GLX: Initialized DRI2 GL provider for screen 0
[   214.005] (II) NOUVEAU(G0): NVEnterVT is called.
[   214.005] (II) intel(0): Setting screen physical size to 508 x 285
[   214.281] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[   214.281] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[   214.281] (**) Power Button: Applying InputClass "system-keyboard"
[   214.281] (II) LoadModule: "libinput"
[   214.281] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   214.332] (II) Module libinput: vendor="X.Org Foundation"
[   214.332] 	compiled for 1.19.3, module version = 0.26.0
[   214.332] 	Module class: X.Org XInput Driver
[   214.332] 	ABI class: X.Org XInput driver, version 24.1
[   214.332] (II) Using input driver 'libinput' for 'Power Button'
[   214.332] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd
22 paused 0
[   214.332] (**) Power Button: always reports core events
[   214.332] (**) Option "Device" "/dev/input/event3"
[   214.332] (**) Option "_source" "server/udev"
[   214.333] (II) event3  - Power Button: is tagged by udev as: Keyboard
[   214.333] (II) event3  - Power Button: device is a keyboard
[   214.333] (II) event3  - Power Button: device removed
[   214.333] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   214.333] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[   214.333] (**) Option "xkb_model" "nodeadkeys"
[   214.333] (**) Option "xkb_layout" "de"
[   214.374] (II) event3  - Power Button: is tagged by udev as: Keyboard
[   214.374] (II) event3  - Power Button: device is a keyboard
[   214.374] (II) config/udev: Adding input device Video Bus
(/dev/input/event5)
[   214.374] (**) Video Bus: Applying InputClass "libinput keyboard
catchall"
[   214.374] (**) Video Bus: Applying InputClass "system-keyboard"
[   214.374] (II) Using input driver 'libinput' for 'Video Bus'
[   214.375] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd
25 paused 0
[   214.375] (**) Video Bus: always reports core events
[   214.375] (**) Option "Device" "/dev/input/event5"
[   214.375] (**) Option "_source" "server/udev"
[   214.375] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[   214.375] (II) event5  - Video Bus: device is a keyboard
[   214.375] (II) event5  - Video Bus: device removed
[   214.375] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[   214.375] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 7)
[   214.375] (**) Option "xkb_model" "nodeadkeys"
[   214.375] (**) Option "xkb_layout" "de"
[   214.376] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[   214.376] (II) event5  - Video Bus: device is a keyboard
[   214.376] (II) config/udev: Adding input device Video Bus
(/dev/input/event4)
[   214.376] (**) Video Bus: Applying InputClass "libinput keyboard
catchall"
[   214.376] (**) Video Bus: Applying InputClass "system-keyboard"
[   214.376] (II) Using input driver 'libinput' for 'Video Bus'
[   214.376] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd
26 paused 0
[   214.376] (**) Video Bus: always reports core events
[   214.376] (**) Option "Device" "/dev/input/event4"
[   214.376] (**) Option "_source" "server/udev"
[   214.377] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   214.377] (II) event4  - Video Bus: device is a keyboard
[   214.377] (II) event4  - Video Bus: device removed
[   214.377] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input4/event4"
[   214.377] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 8)
[   214.377] (**) Option "xkb_model" "nodeadkeys"
[   214.377] (**) Option "xkb_layout" "de"
[   214.377] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   214.377] (II) event4  - Video Bus: device is a keyboard
[   214.377] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[   214.377] (**) Power Button: Applying InputClass "libinput keyboard
catchall"
[   214.377] (**) Power Button: Applying InputClass "system-keyboard"
[   214.377] (II) Using input driver 'libinput' for 'Power Button'
[   214.378] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd
27 paused 0
[   214.378] (**) Power Button: always reports core events
[   214.378] (**) Option "Device" "/dev/input/event0"
[   214.378] (**) Option "_source" "server/udev"
[   214.378] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   214.378] (II) event0  - Power Button: device is a keyboard
[   214.378] (II) event0  - Power Button: device removed
[   214.378] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   214.378] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 9)
[   214.378] (**) Option "xkb_model" "nodeadkeys"
[   214.378] (**) Option "xkb_layout" "de"
[   214.378] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   214.378] (II) event0  - Power Button: device is a keyboard
[   214.379] (II) config/udev: Adding input device Lid Switch
(/dev/input/event2)
[   214.379] (II) No input driver specified, ignoring this device.
[   214.379] (II) This device may have been added with another device file.
[   214.379] (II) config/udev: Adding input device Sleep Button
(/dev/input/event1)
[   214.379] (**) Sleep Button: Applying InputClass "libinput keyboard
catchall"
[   214.379] (**) Sleep Button: Applying InputClass "system-keyboard"
[   214.379] (II) Using input driver 'libinput' for 'Sleep Button'
[   214.379] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd
28 paused 0
[   214.379] (**) Sleep Button: always reports core events
[   214.379] (**) Option "Device" "/dev/input/event1"
[   214.379] (**) Option "_source" "server/udev"
[   214.380] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   214.380] (II) event1  - Sleep Button: device is a keyboard
[   214.380] (II) event1  - Sleep Button: device removed
[   214.380] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[   214.380] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 10)
[   214.380] (**) Option "xkb_model" "nodeadkeys"
[   214.380] (**) Option "xkb_layout" "de"
[   214.380] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[   214.380] (II) event1  - Sleep Button: device is a keyboard
[   214.381] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=3 (/dev/input/event17)
[   214.381] (II) No input driver specified, ignoring this device.
[   214.381] (II) This device may have been added with another device file.
[   214.381] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=7 (/dev/input/event18)
[   214.381] (II) No input driver specified, ignoring this device.
[   214.381] (II) This device may have been added with another device file.
[   214.381] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=8 (/dev/input/event19)
[   214.381] (II) No input driver specified, ignoring this device.
[   214.381] (II) This device may have been added with another device file.
[   214.382] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=9 (/dev/input/event20)
[   214.382] (II) No input driver specified, ignoring this device.
[   214.382] (II) This device may have been added with another device file.
[   214.382] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=10 (/dev/input/event21)
[   214.382] (II) No input driver specified, ignoring this device.
[   214.382] (II) This device may have been added with another device file.
[   214.383] (II) config/udev: Adding input device BisonCam, NB Pro:
BisonCam, NB  (/dev/input/event16)
[   214.383] (**) BisonCam, NB Pro: BisonCam, NB : Applying InputClass
"libinput keyboard catchall"
[   214.383] (**) BisonCam, NB Pro: BisonCam, NB : Applying InputClass
"system-keyboard"
[   214.383] (II) Using input driver 'libinput' for 'BisonCam, NB Pro:
BisonCam, NB '
[   214.383] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd
29 paused 0
[   214.383] (**) BisonCam, NB Pro: BisonCam, NB : always reports core
events
[   214.383] (**) Option "Device" "/dev/input/event16"
[   214.383] (**) Option "_source" "server/udev"
[   214.384] (II) event16 - BisonCam, NB Pro: BisonCam, NB : is tagged
by udev as: Keyboard
[   214.384] (II) event16 - BisonCam, NB Pro: BisonCam, NB : device is a
keyboard
[   214.384] (II) event16 - BisonCam, NB Pro: BisonCam, NB : device removed
[   214.384] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input23/event16"
[   214.384] (II) XINPUT: Adding extended input device "BisonCam, NB
Pro: BisonCam, NB " (type: KEYBOARD, id 11)
[   214.384] (**) Option "xkb_model" "nodeadkeys"
[   214.384] (**) Option "xkb_layout" "de"
[   214.385] (II) event16 - BisonCam, NB Pro: BisonCam, NB : is tagged
by udev as: Keyboard
[   214.385] (II) event16 - BisonCam, NB Pro: BisonCam, NB : device is a
keyboard
[   214.385] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event7)
[   214.385] (**) Logitech USB Receiver: Applying InputClass "libinput
pointer catchall"
[   214.385] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[   214.386] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd
30 paused 0
[   214.386] (**) Logitech USB Receiver: always reports core events
[   214.386] (**) Option "Device" "/dev/input/event7"
[   214.386] (**) Option "_source" "server/udev"
[   214.386] (II) event7  - Logitech USB Receiver: is tagged by udev as:
Mouse
[   214.386] (II) event7  - Logitech USB Receiver: device is a pointer
[   214.386] (II) event7  - Logitech USB Receiver: device removed
[   214.386] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C52F.0001/input/input11/event7"
[   214.386] (II) XINPUT: Adding extended input device "Logitech USB
Receiver" (type: MOUSE, id 12)
[   214.386] (**) Option "AccelerationScheme" "none"
[   214.386] (**) Logitech USB Receiver: (accel) selected scheme none/0
[   214.386] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   214.386] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   214.387] (II) event7  - Logitech USB Receiver: is tagged by udev as:
Mouse
[   214.387] (II) event7  - Logitech USB Receiver: device is a pointer
[   214.387] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/mouse0)
[   214.387] (II) No input driver specified, ignoring this device.
[   214.387] (II) This device may have been added with another device file.
[   214.388] (II) config/udev: Adding input device Logitech USB Receiver
(/dev/input/event8)
[   214.388] (**) Logitech USB Receiver: Applying InputClass "libinput
keyboard catchall"
[   214.388] (**) Logitech USB Receiver: Applying InputClass
"system-keyboard"
[   214.388] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[   214.388] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd
31 paused 0
[   214.388] (**) Logitech USB Receiver: always reports core events
[   214.388] (**) Option "Device" "/dev/input/event8"
[   214.388] (**) Option "_source" "server/udev"
[   214.388] (II) event8  - Logitech USB Receiver: is tagged by udev as:
Keyboard
[   214.388] (II) event8  - Logitech USB Receiver: device is a keyboard
[   214.388] (II) event8  - Logitech USB Receiver: device removed
[   214.388] (II) libinput: Logitech USB Receiver: needs a virtual subdevice
[   214.388] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52F.0002/input/input12/event8"
[   214.388] (II) XINPUT: Adding extended input device "Logitech USB
Receiver" (type: MOUSE, id 13)
[   214.389] (**) Option "AccelerationScheme" "none"
[   214.389] (**) Logitech USB Receiver: (accel) selected scheme none/0
[   214.389] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   214.389] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   214.389] (II) event8  - Logitech USB Receiver: is tagged by udev as:
Keyboard
[   214.389] (II) event8  - Logitech USB Receiver: device is a keyboard
[   214.389] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event11)
[   214.389] (II) No input driver specified, ignoring this device.
[   214.389] (II) This device may have been added with another device file.
[   214.389] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event12)
[   214.389] (II) No input driver specified, ignoring this device.
[   214.389] (II) This device may have been added with another device file.
[   214.390] (II) config/udev: Adding input device HDA Intel PCH Line
(/dev/input/event13)
[   214.390] (II) No input driver specified, ignoring this device.
[   214.390] (II) This device may have been added with another device file.
[   214.390] (II) config/udev: Adding input device HDA Intel PCH Line
Out (/dev/input/event14)
[   214.390] (II) No input driver specified, ignoring this device.
[   214.390] (II) This device may have been added with another device file.
[   214.390] (II) config/udev: Adding input device HDA Intel PCH
Headphone (/dev/input/event15)
[   214.390] (II) No input driver specified, ignoring this device.
[   214.390] (II) This device may have been added with another device file.
[   214.390] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event6)
[   214.390] (**) AT Translated Set 2 keyboard: Applying InputClass
"libinput keyboard catchall"
[   214.390] (**) AT Translated Set 2 keyboard: Applying InputClass
"system-keyboard"
[   214.390] (II) Using input driver 'libinput' for 'AT Translated Set 2
keyboard'
[   214.391] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd
32 paused 0
[   214.391] (**) AT Translated Set 2 keyboard: always reports core events
[   214.391] (**) Option "Device" "/dev/input/event6"
[   214.391] (**) Option "_source" "server/udev"
[   214.391] (II) event6  - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[   214.391] (II) event6  - AT Translated Set 2 keyboard: device is a
keyboard
[   214.391] (II) event6  - AT Translated Set 2 keyboard: device removed
[   214.391] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input6/event6"
[   214.391] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 14)
[   214.391] (**) Option "xkb_model" "nodeadkeys"
[   214.391] (**) Option "xkb_layout" "de"
[   214.391] (II) event6  - AT Translated Set 2 keyboard: is tagged by
udev as: Keyboard
[   214.391] (II) event6  - AT Translated Set 2 keyboard: device is a
keyboard
[   214.392] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/event10)
[   214.392] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"libinput touchpad catchall"
[   214.392] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"MyTouchpad"
[   214.392] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics
TouchPad'
[   214.392] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd
33 paused 0
[   214.392] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   214.392] (**) Option "Device" "/dev/input/event10"
[   214.392] (**) Option "_source" "server/udev"
[   214.392] (II) event10 - SynPS/2 Synaptics TouchPad: is tagged by
udev as: Touchpad
[   214.392] (II) event10 - SynPS/2 Synaptics TouchPad: device is a touchpad
[   214.392] (II) event10 - SynPS/2 Synaptics TouchPad: device removed
[   214.393] (**) Option "Tapping" "on"
[   214.393] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio2/input/input15/event10"
[   214.393] (II) XINPUT: Adding extended input device "SynPS/2
Synaptics TouchPad" (type: TOUCHPAD, id 15)
[   214.393] (**) Option "AccelerationScheme" "none"
[   214.393] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[   214.393] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
factor: 2.000
[   214.393] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
threshold: 4
[   214.393] (II) event10 - SynPS/2 Synaptics TouchPad: is tagged by
udev as: Touchpad
[   214.393] (II) event10 - SynPS/2 Synaptics TouchPad: device is a touchpad
[   214.393] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/mouse1)
[   214.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"MyTouchpad"
[   214.393] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics
TouchPad'
[   214.393] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   214.393] (**) Option "Device" "/dev/input/mouse1"
[   214.393] (**) Option "_source" "server/udev"
[   214.393] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse1
	Permission denied.
[   214.393] (II) mouse1: opening input device '/dev/input/mouse1'
failed (Permission denied).
[   214.393] (II) mouse1  - failed to create input device
'/dev/input/mouse1'.
[   214.393] (EE) libinput: SynPS/2 Synaptics TouchPad: Failed to create
a device for /dev/input/mouse1
[   214.393] (EE) PreInit returned 2 for "SynPS/2 Synaptics TouchPad"
[   214.393] (II) UnloadModule: "libinput"
[   214.394] (II) config/udev: Adding input device PC Speaker
(/dev/input/event9)
[   214.394] (II) No input driver specified, ignoring this device.
[   214.394] (II) This device may have been added with another device file.
[   214.400] (**) Logitech USB Receiver: Applying InputClass "libinput
keyboard catchall"
[   214.400] (**) Logitech USB Receiver: Applying InputClass
"system-keyboard"
[   214.400] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[   214.400] (II) systemd-logind: returning pre-existing fd for
/dev/input/event8 13:72
[   214.400] (**) Logitech USB Receiver: always reports core events
[   214.400] (**) Option "Device" "/dev/input/event8"
[   214.400] (**) Option "_source" "_driver/libinput"
[   214.400] (II) libinput: Logitech USB Receiver: is a virtual subdevice
[   214.400] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52F.0002/input/input12/event8"
[   214.400] (II) XINPUT: Adding extended input device "Logitech USB
Receiver" (type: KEYBOARD, id 16)
[   214.400] (**) Option "xkb_model" "nodeadkeys"
[   214.400] (**) Option "xkb_layout" "de"
[   223.150] (II) intel(0): EDID vendor "CMO", prod id 5920
[   223.150] (II) intel(0): Printing DDC gathered Modelines:
[   223.150] (II) intel(0): Modeline "1920x1080"x0.0  138.70  1920 1968
2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[   223.360] (II) intel(0): EDID vendor "CMO", prod id 5920
[   223.360] (II) intel(0): Printing DDC gathered Modelines:
[   223.360] (II) intel(0): Modeline "1920x1080"x0.0  138.70  1920 1968
2000 2080  1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP)
[   889.548] (II) Axis 0 value 1123 is outside expected range [1261, 5903]
See
https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ranges.html 

for details
[  3910.611] (II) Axis 0x1 value 4852 is outside expected range [1244, 4843]
See
https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ranges.html 

for details
[  7223.630] (II) Axis 0x1 value 998 is outside expected range [1244, 4843]
See
https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ranges.html 

for details
[ 10295.091] (II) Axis 0x1 value 1070 is outside expected range [1244, 4843]
See
https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ranges.html 

for details
[ 13380.382] (II) Axis 0x1 value 1194 is outside expected range [1244, 4843]
See
https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ranges.html 

for details
[ 16423.988] (II) Axis 0x1 value 4883 is outside expected range [1244, 4843]
See
https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ranges.html 

for details
[ 16933.358] (EE)
[ 16933.358] (EE) Backtrace:
[ 16933.396] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x139)
[0x55ed0ff73e99]
[ 16933.396] (EE) 1: /usr/lib/libpthread.so.0 (funlockfile+0x50)
[0x7f52df1f4e1f]
[ 16933.411] (EE) 2: /usr/lib/libc.so.6 (gsignal+0x110) [0x7f52dee60860]
[ 16933.412] (EE) 3: /usr/lib/libc.so.6 (abort+0x1c9) [0x7f52dee61ec9]
[ 16933.413] (EE) 4: /usr/lib/libc.so.6 (__assert_fail_base+0x14c)
[0x7f52dee590bc]
[ 16933.414] (EE) 5: /usr/lib/libc.so.6 (__assert_fail+0x43)
[0x7f52dee59133]
[ 16933.415] (EE) 6: /usr/lib/libinput.so.10
(libinput_event_get_pointer_event+0xf41d) [0x7f52d8b6b87d]
[ 16933.415] (EE) 7: /usr/lib/libinput.so.10
(libinput_event_get_pointer_event+0xff08) [0x7f52d8b706c8]
[ 16933.416] (EE) 8: /usr/lib/libinput.so.10 (libinput_ref+0x448)
[0x7f52d8b4c228]
[ 16933.417] (EE) 9: /usr/lib/libinput.so.10 (libinput_dispatch+0x5f)
[0x7f52d8b4babf]
[ 16933.418] (EE) 10: /usr/lib/xorg/modules/input/libinput_drv.so
(_init+0x29b9) [0x7f52d8db75b9]
[ 16933.418] (EE) 11: /usr/lib/xorg-server/Xorg (input_unlock+0x293)
[0x55ed0ff723d3]
[ 16933.418] (EE) 12: /usr/lib/xorg-server/Xorg (OsCleanup+0x621)
[0x55ed0ff74e01]
[ 16933.418] (EE) 13: /usr/lib/xorg-server/Xorg (input_unlock+0xde)
[0x55ed0ff71fce]
[ 16933.419] (EE) 14: /usr/lib/libpthread.so.0 (start_thread+0xdc)
[0x7f52df1ea08c]
[ 16933.420] (EE) 15: /usr/lib/libc.so.6 (clone+0x3f) [0x7f52def21eb8]
[ 16933.420] (EE)
[ 16933.420] (EE)
Fatal server error:
[ 16933.420] (EE) Caught signal 6 (Aborted). Server aborting
[ 16933.420] (EE)
[ 16933.420] (EE)
Please consult the The X.Org Foundation support
	 at http://wiki.x.org
  for help.
[ 16933.420] (EE) Please also check the log file at
"/home/peter/.local/share/xorg/Xorg.0.log" for additional information.
[ 16933.420] (EE)
[ 16933.420] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 16933.992] (EE) Server terminated with error (1). Closing log file.


More information about the arch-general mailing list