[arch-general] Error setting up a HP all in one device

[sysadmin at bsd.com.mx]

El 01/10/2021 6:02 am, Mike Cloaked via arch-general escribió:

> On Fri, Oct 1, 2021 at 2:24 AM Adriel Cardenas via arch-general <
> arch-general at lists.archlinux.org> wrote:
> 
>> Hi everyone,
>> 
>> I am trying to set up a MFP 125a (all in one HP device), and usually
>> just installing CUPS + HPLIP detects and configure this kind of 
>> devices,
>> however in this case I am able to use the printer but not the scanner.
>> The printer it is detected correctly and works fine, but keep getting 
>> an
>> I/O error whenever I try to use the scanner.
>> 
>> The device is recognized by lsusb like:
>> 
>> Bus 001 Device 005: ID 03F0:222a HP, Inc LaserJet Pro MFP M125nw
>> 
>> And scanimage -L and sane-find-scanner recognize it like:
>> 
>> device `hpaio:/usb/HP_LaserJet_Pro_MFP_M125a?serial=CNB6F0568K' is a
>> Hewlett-Packard HP_LaserJet_Pro_MFP_M125a all-in-one
>> 
>> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x222a [HP
>> LaserJet Pro MFP M125a]) at libusb:001:005
>> 
>> Doing a little research got here:
>> 
>> https://evilshit.wordpress.com/2012/09/23/how-to-install-and-configure-hp-printers-scanners-on-arch-linux/
>> where indicates that uncommenting the #hpaio line in the
>> /etc/sane.d/dll.conf would help, but it doesnt have that line :(
>> 
>> Does anyone have seen something like this? any good tips or links for
>> settiing this AIO device?
>> 
>> uname -a: Linux archlinux 5.10.69-1-lts #1 SMP Sun, 26 Sep 2021 
>> 12:30:37
>> +0000 x86_64 GNU/LinuxP
> 
> Have you tried setting up the printer and scanner with driverless 
> printing
> and scanning?  I have an HP printer, and setting it up driverless means
> there is no need to use the HPLIP package at all and it sets up a 
> single
> ppd file, and works well in general.  Although I don't have a scanner 
> the
> arch wiki has advice on setting up driverless scanning too at
> https://wiki.archlinux.org/title/SANE#Installation
> 
> That may lead to a solution?

Thanks, I did try that alternative first, besides the SANE 
configuration.

Regards