[PATCH] paccache: add --age-atime and --age-mtime options
Johannes Löthberg
johannes at kyriasis.com
Sun Sep 16 21:22:59 UTC 2018
Hey,
Excerpts from wisp3rwind's message of September 15, 2018 0:58:
> ---
> I would feel a lot more confident about using the paccache systemd
> service if it kept packages based on age instead of just the few most
> recent.
>
> This patch adds the functionality to skip candidates that are not older
> (in terms of atime or mtime) than some specified age. It seems to work,
> but I'm not exactly a bash expert, so please review with care. I'd
> appreciate if this could be merged!
>
So I would overall be okay with adding something like this, but there
are some changes I would want to have made first. First of all, is
there any specific case where you would need both supported? Because
only having mtime support sounds like it should be good enough?
> doc/paccache.8.txt | 5 ++++
> src/paccache.sh.in | 58 +++++++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 62 insertions(+), 1 deletion(-)
>
> diff --git a/doc/paccache.8.txt b/doc/paccache.8.txt
> index db81283..c9e3807 100644
> --- a/doc/paccache.8.txt
> +++ b/doc/paccache.8.txt
> @@ -38,6 +38,11 @@ Options
> Scan for packages for a specific architecture. Default is to scan for
> all architectures.
>
> +*\--age-atime <age>*::
> +*\--age-mtime <age>*::
> + Only consider packages for removal with atime respectively mtime older than
> + specified. The age can be given as '10d', '1m', '1y', '1y1m' etc.
> +
I would much rather these be called min-.time, "age-mtime" feels rather
non-obvious.
> *-c, \--cachedir <dir>*::
> Specify a different cache directory. This option can be used more than once.
> Default is to use the cache directory configured in 'pacman.conf'.
> diff --git a/src/paccache.sh.in b/src/paccache.sh.in
> index 012ba9f..8ee5792 100644
> --- a/src/paccache.sh.in
> +++ b/src/paccache.sh.in
> @@ -27,6 +27,7 @@ declare -r myver='@PACKAGE_VERSION@'
>
> declare -a cachedirs=() candidates=() cmdopts=() whitelist=() blacklist=()
> declare -i delete=0 dryrun=0 filecount=0 move=0 needsroot=0 totalsaved=0 verbose=0
> +declare -i age_atime=0 age_mtime=0
> declare delim=$'\n' keep=3 movedir= scanarch=
>
> QUIET=0
> @@ -40,6 +41,29 @@ die() {
> exit 1
> }
>
> +# Parses the age --age-atime and --age-mtime arguments
> +parse_age() {
> + declare -i age=0
> + if [[ $2 =~ ^[[:space:]]*([0-9]+[dmy][[:space:]]*)+$ ]]; then
> + # Add spaces to facilitate splitting
> + temp=${2//d/d }
> + temp=${temp//m/m }
> + temp=${temp//y/y }
> + read -a temp <<< "${temp[*]}"
> + for a in ${temp[@]}; do
> + num=${a:0: -1}
> + case ${a: -1} in
> + d) age=$(( age + num )) ;;
> + m) age=$(( age + num * 30 )) ;;
> + y) age=$(( age + num * 365 )) ;;
> + esac
> + done
> + else
> + die "argument '%s' to option '%s' must be of the form '([0-9]+[dmy])+'" "$2" "$1"
> + fi
> + echo $(( age * 24 * 60 * 60 ))
> +}
> +
> # reads a list of files on stdin and prints out deletion candidates
> pkgfilter() {
> # there's whitelist and blacklist parameters passed to this
> @@ -174,6 +198,10 @@ Usage: ${myname} <operation> [options] [targets...]
> -r, --remove remove candidate packages.
>
> Options:
> + --age-atime <age>
> + --age-mtime <age> keep packages with an atime/mtime that is not at least
> + <age> ago, where <age> is given as '10d', '1m', '1y',
> + '1y1m' etc.
> -a, --arch <arch> scan for "arch" (default: all architectures).
> -c, --cachedir <dir> scan "dir" for packages. can be used more than once.
> (default: read from @sysconfdir@/pacman.conf).
> @@ -200,7 +228,8 @@ version() {
>
> OPT_SHORT=':a:c:dfhi:k:m:qrsuVvz'
> OPT_LONG=('arch:' 'cachedir:' 'dryrun' 'force' 'help' 'ignore:' 'keep:' 'move'
> - 'nocolor' 'quiet' 'remove' 'uninstalled' 'version' 'verbose' 'null')
> + 'nocolor' 'quiet' 'remove' 'uninstalled' 'version' 'verbose' 'null'
> + 'age-atime:' 'age-mtime:')
>
> if ! parseopts "$OPT_SHORT" "${OPT_LONG[@]}" -- "$@"; then
> exit 1
> @@ -210,6 +239,18 @@ unset OPT_SHORT OPT_LONG OPTRET
>
> while :; do
> case $1 in
> + --age-atime)
> + age_atime=$(parse_age "$1" "$2")
> + if (( $? )); then
> + exit 1
> + fi
> + shift ;;
> + --age-mtime)
> + age_mtime=$(parse_age "$1" "$2")
> + if (( $? )); then
> + exit 1
> + fi
> + shift ;;
> -a|--arch)
> scanarch=$2
> shift ;;
> @@ -319,6 +360,21 @@ for cachedir in "${cachedirs[@]}"; do
> popd &>/dev/null
> done
>
> +# remove any candidates that are not old enough yet
> +if (( $age_atime || $age_mtime )); then
Variables do not need to be dollar prefixed in arithmetic expansion.
> + currtime=$(date +%s)
> + for cand in "${candidates[@]}"; do
> + IFS=';' read -d '' -a temp <<< $(stat --format '%X;%Y' "$cand")
There's no reason to have this be read into an array, something like
this would be simpler:
IFS=';' read atime mtime < <(stat --format '%X;%Y' "$cand")
> + if (( ( $(( $currtime - ${temp[0]} )) > $age_atime ) && \
> + ( $(( $currtime - ${temp[1]} )) > $age_mtime ) \
I think this should work?:
if (( currtime - atime > min_atime )) && \
(( currtime - mtime > min_mtime ))
> + )); then
> + candtemp+=("$cand")
> + fi
> + done
> + candidates=("${candtemp[@]}")
> + unset candtemp
> +fi
> +
> if (( ! ${#candidates[*]} )); then
> msg 'no candidate packages found for pruning'
> exit 0
> --
> 2.19.0
>
--
Sincerely,
Johannes Löthberg
PGP Key ID: 0x50FB9B273A9D0BB5
PGP Key FP: 5134 EF9E AF65 F95B 6BB1 608E 50FB 9B27 3A9D 0BB5
https://theos.kyriasis.com/~kyrias/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 1727 bytes
Desc: not available
URL: <https://lists.archlinux.org/pipermail/pacman-contrib/attachments/20180916/27bfac57/attachment-0001.sig>
More information about the pacman-contrib
mailing list