On Thu, Feb 21, 2013 at 10:32 PM, Rodrigo Rivas wrote: On Thu, Feb 21, 2013 at 9:17 PM, Mike Cloaked wrote: I am stuck on the configuration of the scanner functionality for a
Samsung
SCX-4500W multifunction printer/scanner. I can get the printing function of this printer to work by the following
steps: 1) Add a line to /etc/udev/rules.d/70-usbprinter.rules containing:
ATTR{idVendor}=="04e8", ATTR{idProduct}=="342b", MODE:="0660",
GROUP:="lp" I have a SCX-4200 MFP, quite similar to yours, and this is my udev rule: ATTR{idVendor}=="04e8", ATTR{idProduct}=="341b", MODE:="0660", GROUP:="lp",
ENV{libsane_matched}:="yes" The product is different, obviously, but note the added environment
variable. I cannot remember why I put it there, but hey! there it is, and
it works. $ scanimage -L
device `xerox_mfp:libusb:002:002' is a SAMSUNG ORION multi-function
peripheral Thanks Rodrigo,
I tried adding in the additional environment variable and rebooted the
machine - when I do:
$ scanimage -L
device `xerox_mfp:libusb:001:006' is a Samsung Samsung SCX-4500W Series
multi-function peripheral
But if I do it again then:
scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
So it is still not working - when I went to the GIMP and tried to create a
scan it hung GIMP after not finding any scanner devices.
Plus journalctl -xn has:
Plus journalctl:
Feb 22 10:35:04 home1 systemd[1]: configure-printer@usb-001-006.service:
main process exited, co
Feb 22 10:35:04 home1 colord[365]: Device added:
sysfs-Samsung_Electronics_Co.__Ltd.-SCX-4500W_S
Feb 22 10:35:04 home1 udev-configure-printer[2919]: add usb-001-006
Feb 22 10:35:04 home1 udev-configure-printer[2919]: device devpath is
/devices/pci0000:00/0000:0
Feb 22 10:35:04 home1 udev-configure-printer[2919]: Device already handled
Feb 22 10:35:04 home1 udev-configure-printer[2920]: add usb-001-004
Feb 22 10:35:04 home1 systemd[1]: Unit
configure-printer@usb-001-006.serviceentered failed stat
Feb 22 10:35:04 home1 udev-configure-printer[2920]: no device named
/dev/bus/usb/001/004 found
Feb 22 10:35:04 home1 systemd[1]: configure-printer@usb-001-004.service:
main process exited, co
Feb 22 10:35:04 home1 systemd[1]: Unit
configure-printer@usb-001-004.serviceentered failed stat
So clearly I am missing something in the configs somewhere - but I don't
know where to look next?
--
mike c