Hey hey, this is a strange error. I tried installing perl-event, an AUR package with trizen: trizen -Sy perl-event The package downloads, comiles and tests, as far as I can see and finally fails with: :: Unable to find a built tarball for perl-event (below is the full output of the command) Does anyone have an idea how to fix this? Is this an issue that might occasionally arise?
Best wishes and tahnks,
Jeanette
*** Output of trizen -Sy perl-event :: Pacman command: /usr/bin/sudo /usr/bin/pacman -Sy :: Synchronising package databases... core downloading... extra downloading... community downloading... multilib downloading... realtime downloading... :: Pulling AUR changes: perl-event
-------------------------------------------------------------------------------- :: Content of /tmp/trizen-jeanette/perl-event/PKGBUILD --------------------------------------------------------------------------------
# Maintainer: Brian Bidulock bidulock@Openss7.org # Contributor: John D Jones III <jnbek1972 -_AT_- g m a i l -_Dot_- com> # Generator : CPANPLUS::Dist::Arch 1.29
pkgname=perl-event pkgver=1.28 pkgrel=1.1 pkgdesc="Event loop processing" arch=('i686' 'x86_64') license=('PerlArtistic' 'GPL') options=('!emptydirs') makedepends=() url='http://search.mcpan.org/dist/Event' source=("http://search.mcpan.org/CPAN/authors/id/E/ET/ETJ/Event-$%7Bpkgver%7D.tar.gz") sha512sums=('8c7e676c3f659f85ae53ff3b60142943c72881f101f2c66dfd1a7e47babfade0171b78a2062476b6e061f12370b279b73abbe3ab01b07d7088145fa9508e7d0c') _distdir="Event-${pkgver}"
build() { ( export PERL_MM_USE_DEFAULT=1 PERL5LIB="" \ PERL_AUTOINSTALL=--skipdeps \ PERL_MM_OPT="INSTALLDIRS=vendor DESTDIR='$pkgdir'" \ PERL_MB_OPT="--installdirs vendor --destdir '$pkgdir'" \ MODULEBUILDRC=/dev/null
cd "$srcdir/$_distdir" /usr/bin/perl Makefile.PL make ) }
check() { cd "$srcdir/$_distdir" ( export PERL_MM_USE_DEFAULT=1 PERL5LIB="" make test ) }
_perl_depends() { # template start; name=perl-binary-module-dependency; version=1; if [[ $(find "$pkgdir/usr/lib/perl5/" -name "*.so") ]]; then _perlver_min=$(perl -e '$v = $^V->{version}; print $v->[0].".".($v->[1]);') _perlver_max=$(perl -e '$v = $^V->{version}; print $v->[0].".".($v->[1]+1);') depends+=("perl>=$_perlver_min" "perl<$_perlver_max") fi # template end; }
package() { cd "$srcdir/$_distdir" make install
find "$pkgdir" ( -name .packlist -o -name perllocal.pod ) -delete _perl_depends }
# Local Variables: # mode: shell-script # sh-basic-offset: 2 # End: # vim:set ts=2 sw=2 et:
Repository : AUR Name : perl-event Version : 1.28-1.1 Maintainer : bidulock URL : http://search.mcpan.org/dist/Event AUR URL : https://aur.archlinux.org/packages/perl-event License : PerlArtistic GPL Votes : 7 Popularity : 0% Installed : No Out Of Date : No Depends On : None Make Deps : None Check Deps : None Optional Deps : None Provides : None Conflicts With : None Replaces : None Package Base : perl-event Last Update : Thu Jun 2 03:58:45 2022 Description : Event loop processing
==> Making package: perl-event 1.28-1.1 (Fri 01 Jul 2022 22:50:05 CEST) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Found Event-1.28.tar.gz ==> Validating source files with sha512sums... Event-1.28.tar.gz ... Passed ==> Extracting sources... -> Extracting Event-1.28.tar.gz with bsdtar ==> Starting build()... Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Event Writing MYMETA.yml and MYMETA.json cp lib/Event/generic.pod blib/lib/Event/generic.pod cp lib/Event/Watcher.pm blib/lib/Event/Watcher.pm cp lib/Event/type.pm blib/lib/Event/type.pm cp lib/Event/io.pm blib/lib/Event/io.pm cp lib/Event/MakeMaker.pm blib/lib/Event/MakeMaker.pm cp lib/Event/idle.pm blib/lib/Event/idle.pm cp lib/Event/typemap blib/lib/Event/typemap cp lib/Event/signal.pm blib/lib/Event/signal.pm cp lib/Event/timer.pm blib/lib/Event/timer.pm cp lib/Event.pm blib/lib/Event.pm cp lib/Event/EventAPI.h blib/lib/Event/EventAPI.h cp lib/Event.pod blib/lib/Event.pod cp lib/Event/group.pm blib/lib/Event/group.pm cp lib/Event/generic.pm blib/lib/Event/generic.pm cp lib/Event/var.pm blib/lib/Event/var.pm Running Mkbootstrap for Event () chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 "/usr/bin/perl" "/usr/share/perl5/core_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/core_perl/ExtUtils/typemap' -typemap '/tmp/trizen-jeanette/perl-event/src/Event-1.28/lib/Event/typemap' Event.xs > Event.xsc mv Event.xsc Event.c cc -c -Ic -Ilib/Event -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -flto -DVERSION="1.28" -DXS_VERSION="1.28" -fPIC "-I/usr/lib/perl5/5.36/core_perl/CORE" Event.c In file included from Event.xs:269: c/var.c: In function 'pe_var_start': c/var.c:82:20: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 82 | mg->mg_virtual = &PL_vtbl_uvar; | ^ rm -f blib/arch/auto/Event/Event.so cc -shared -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -flto -L/usr/local/lib -fstack-protector-strong Event.o -o blib/arch/auto/Event/Event.so \ \
chmod 755 blib/arch/auto/Event/Event.so Manifying 3 pod documents ==> Starting check()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/attach_to.t ..... ok t/bored.t ......... ok t/callback.t ...... ok t/data.t .......... ok t/delete.t ........ ok t/eval.t .......... ok t/fifo.t .......... ok t/generic.t ....... ok t/group.t ......... ok t/hook.t .......... ok t/hup.t ........... ok t/idle.t .......... ok t/Inline.t ........ ok t/io.t ............ ok t/leak.t .......... ok t/leak2.t ......... ok t/loop.t .......... ok t/now.t ........... ok t/reenter.t ....... ok t/signal.t ........ ok t/timeout_cb.t .... ok t/timer.t ......... ok t/unconfigured.t .. ok t/var.t ........... ok All tests successful. Files=24, Tests=124, 11 wallclock secs ( 0.05 usr 0.03 sys + 2.34 cusr 0.66 csys = 3.08 CPU) Result: PASS ==> Entering fakeroot environment... ==> Starting package()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 Manifying 3 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/auto/Event/Event.so Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pod Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/var.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/group.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/EventAPI.h Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/timer.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/signal.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/typemap Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/idle.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/MakeMaker.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/io.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/type.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/Watcher.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pod Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event::generic.3pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event::MakeMaker.3pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event.3pm Appending installation info to /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/core_perl/perllocal.pod ==> Tidying install... -> Removing empty directories... -> Removing libtool files... -> Purging unwanted files... -> Removing static library files... -> Stripping unneeded symbols from binaries and libraries... -> Compressing man and info pages... ==> Checking for packaging issues... ==> Creating package "perl-event"... -> Generating .PKGINFO file... -> Generating .BUILDINFO file... -> Generating .MTREE file... -> Compressing package... ==> Leaving fakeroot environment. ==> Finished making: perl-event 1.28-1.1 (Fri 01 Jul 2022 22:50:21 CEST) ==> Cleaning up... :: Unable to find a built tarball for perl-event *** End of trizen -Sy perl-event
Use yay??
randy@archlinux ~]$ yay -S perl-event :: Checking for conflicts... :: Checking for inner conflicts... [Aur:1] perl-event-1.28-1.1
:: (1/1) Downloaded PKGBUILD: perl-event 1 perl-event (Build Files Exist) ==> Diffs to show? ==> [N]one [A]ll [Ab]ort [I]nstalled [No]tInstalled or (1 2 3, 1-3, ^4) ==> :: (1/1) Parsing SRCINFO: perl-event ==> Making package: perl-event 1.28-1.1 (Fri 01 Jul 2022 03:59:38 PM CDT) ==> Retrieving sources... -> Downloading Event-1.28.tar.gz... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 5 100 5 0 0 10 0 --:--:-- --:--:-- --:--:-- 10 100 250k 100 250k 0 0 238k 0 0:00:01 0:00:01 --:--:-- 1104k ==> Validating source files with sha512sums... Event-1.28.tar.gz ... Passed ==> Making package: perl-event 1.28-1.1 (Fri 01 Jul 2022 03:59:41 PM CDT) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Found Event-1.28.tar.gz ==> Validating source files with sha512sums... Event-1.28.tar.gz ... Passed ==> Removing existing $srcdir/ directory... ==> Extracting sources... -> Extracting Event-1.28.tar.gz with bsdtar ==> Sources are ready. ==> Making package: perl-event 1.28-1.1 (Fri 01 Jul 2022 03:59:46 PM CDT) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> WARNING: Using existing $srcdir/ tree ==> Starting build()... Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Event Writing MYMETA.yml and MYMETA.json "/usr/bin/perl" "/usr/share/perl5/core_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/core_perl/ExtUtils/typemap' -typemap '/home/randy/.cache/yay/perl-event/src/Event-1.28/lib/Event/typemap' Event.xs > Event.xsc Running Mkbootstrap for Event () chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 cp lib/Event.pm blib/lib/Event.pm cp lib/Event/type.pm blib/lib/Event/type.pm cp lib/Event/Watcher.pm blib/lib/Event/Watcher.pm cp lib/Event/EventAPI.h blib/lib/Event/EventAPI.h cp lib/Event/signal.pm blib/lib/Event/signal.pm cp lib/Event/typemap blib/lib/Event/typemap cp lib/Event/io.pm blib/lib/Event/io.pm cp lib/Event/group.pm blib/lib/Event/group.pm cp lib/Event.pod blib/lib/Event.pod cp lib/Event/generic.pod blib/lib/Event/generic.pod cp lib/Event/var.pm blib/lib/Event/var.pm cp lib/Event/generic.pm blib/lib/Event/generic.pm cp lib/Event/timer.pm blib/lib/Event/timer.pm cp lib/Event/MakeMaker.pm blib/lib/Event/MakeMaker.pm cp lib/Event/idle.pm blib/lib/Event/idle.pm mv Event.xsc Event.c cc -c -Ic -Ilib/Event -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -flto -DVERSION="1.28" -DXS_VERSION="1.28" -fPIC "-I/usr/lib/perl5/5.36/core_perl/CORE" Event.c In file included from Event.xs:269: c/var.c: In function ‘pe_var_start’: c/var.c:82:20: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 82 | mg->mg_virtual = &PL_vtbl_uvar; | ^ rm -f blib/arch/auto/Event/Event.so cc -shared -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -flto -L/usr/local/lib -fstack-protector-strong Event.o -o blib/arch/auto/Event/Event.so \ \
chmod 755 blib/arch/auto/Event/Event.so Manifying 3 pod documents ==> Starting check()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/attach_to.t ..... ok t/bored.t ......... ok t/callback.t ...... ok t/data.t .......... ok t/delete.t ........ ok t/eval.t .......... ok t/fifo.t .......... ok t/generic.t ....... ok t/group.t ......... ok t/hook.t .......... ok t/hup.t ........... ok t/idle.t .......... ok t/Inline.t ........ ok t/io.t ............ ok t/leak.t .......... ok t/leak2.t ......... ok t/loop.t .......... ok t/now.t ........... ok t/reenter.t ....... ok t/signal.t ........ ok t/timeout_cb.t .... ok t/timer.t ......... ok t/unconfigured.t .. ok t/var.t ........... ok All tests successful. Files=24, Tests=124, 12 wallclock secs ( 0.11 usr 0.02 sys + 3.05 cusr 0.38 csys = 3.56 CPU) Result: PASS ==> Entering fakeroot environment... ==> Starting package()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 Manifying 3 pod documents Appending installation info to /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/core_perl/perllocal.pod Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/auto/Event/Event.so Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pod Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/type.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/Watcher.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/EventAPI.h Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/signal.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/typemap Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/io.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/group.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pod Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/var.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/timer.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/MakeMaker.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/idle.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/share/man/man3/Event.3pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/share/man/man3/Event::MakeMaker.3pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/share/man/man3/Event::generic.3pm ==> Tidying install... -> Removing empty directories... -> Removing libtool files... -> Purging unwanted files... -> Removing static library files... -> Stripping unneeded symbols from binaries and libraries... -> Compressing man and info pages... ==> Checking for packaging issues... ==> Creating package "perl-event"... -> Generating .PKGINFO file... -> Generating .BUILDINFO file... -> Generating .MTREE file... -> Compressing package... ==> Leaving fakeroot environment. ==> Finished making: perl-event 1.28-1.1 (Fri 01 Jul 2022 04:00:08 PM CDT) ==> Cleaning up... loading packages... resolving dependencies... looking for conflicting packages...
Packages (1) perl-event-1.28-1.1
Total Installed Size: 0.14 MiB
:: Proceed with installation? [Y/n] (1/1) checking keys in keyring [##################################################################] 100% (1/1) checking package integrity [##################################################################] 100% (1/1) loading package files [##################################################################] 100% (1/1) checking for file conflicts [##################################################################] 100% (1/1) checking available disk space [##################################################################] 100% :: Processing package changes... (1/1) installing perl-event [##################################################################] 100% :: Running post-transaction hooks... (1/2) Arming ConditionNeedsUpdate... (2/2) Warn about old perl modules [randy@archlinux ~]$
On 7/1/2022 3:58 PM, Jeanette C. via arch-general wrote:
Hey hey, this is a strange error. I tried installing perl-event, an AUR package with trizen: trizen -Sy perl-event The package downloads, comiles and tests, as far as I can see and finally fails with: :: Unable to find a built tarball for perl-event (below is the full output of the command) Does anyone have an idea how to fix this? Is this an issue that might occasionally arise?
Best wishes and tahnks,
Jeanette
*** Output of trizen -Sy perl-event :: Pacman command: /usr/bin/sudo /usr/bin/pacman -Sy :: Synchronising package databases... core downloading... extra downloading... community downloading... multilib downloading... realtime downloading... :: Pulling AUR changes: perl-event
:: Content of /tmp/trizen-jeanette/perl-event/PKGBUILD
# Maintainer: Brian Bidulock bidulock@Openss7.org # Contributor: John D Jones III <jnbek1972 -_AT_- g m a i l -_Dot_- com> # Generator : CPANPLUS::Dist::Arch 1.29
pkgname=perl-event pkgver=1.28 pkgrel=1.1 pkgdesc="Event loop processing" arch=('i686' 'x86_64') license=('PerlArtistic' 'GPL') options=('!emptydirs') makedepends=() url='http://search.mcpan.org/dist/Event' source=("http://search.mcpan.org/CPAN/authors/id/E/ET/ETJ/Event-$%7Bpkgver%7D.tar.gz")
sha512sums=('8c7e676c3f659f85ae53ff3b60142943c72881f101f2c66dfd1a7e47babfade0171b78a2062476b6e061f12370b279b73abbe3ab01b07d7088145fa9508e7d0c')
_distdir="Event-${pkgver}"
build() { ( export PERL_MM_USE_DEFAULT=1 PERL5LIB="" \ PERL_AUTOINSTALL=--skipdeps \ PERL_MM_OPT="INSTALLDIRS=vendor DESTDIR='$pkgdir'" \ PERL_MB_OPT="--installdirs vendor --destdir '$pkgdir'" \ MODULEBUILDRC=/dev/null
cd "$srcdir/$_distdir" /usr/bin/perl Makefile.PL make ) }
check() { cd "$srcdir/$_distdir" ( export PERL_MM_USE_DEFAULT=1 PERL5LIB="" make test ) }
_perl_depends() { # template start; name=perl-binary-module-dependency; version=1; if [[ $(find "$pkgdir/usr/lib/perl5/" -name "*.so") ]]; then _perlver_min=$(perl -e '$v = $^V->{version}; print $v->[0].".".($v->[1]);') _perlver_max=$(perl -e '$v = $^V->{version}; print $v->[0].".".($v->[1]+1);') depends+=("perl>=$_perlver_min" "perl<$_perlver_max") fi # template end; }
package() { cd "$srcdir/$_distdir" make install
find "$pkgdir" ( -name .packlist -o -name perllocal.pod ) -delete _perl_depends }
# Local Variables: # mode: shell-script # sh-basic-offset: 2 # End: # vim:set ts=2 sw=2 et:
Repository : AUR Name : perl-event Version : 1.28-1.1 Maintainer : bidulock URL : http://search.mcpan.org/dist/Event AUR URL : https://aur.archlinux.org/packages/perl-event License : PerlArtistic GPL Votes : 7 Popularity : 0% Installed : No Out Of Date : No Depends On : None Make Deps : None Check Deps : None Optional Deps : None Provides : None Conflicts With : None Replaces : None Package Base : perl-event Last Update : Thu Jun 2 03:58:45 2022 Description : Event loop processing
==> Making package: perl-event 1.28-1.1 (Fri 01 Jul 2022 22:50:05 CEST) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Found Event-1.28.tar.gz ==> Validating source files with sha512sums... Event-1.28.tar.gz ... Passed ==> Extracting sources... -> Extracting Event-1.28.tar.gz with bsdtar ==> Starting build()... Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Event Writing MYMETA.yml and MYMETA.json cp lib/Event/generic.pod blib/lib/Event/generic.pod cp lib/Event/Watcher.pm blib/lib/Event/Watcher.pm cp lib/Event/type.pm blib/lib/Event/type.pm cp lib/Event/io.pm blib/lib/Event/io.pm cp lib/Event/MakeMaker.pm blib/lib/Event/MakeMaker.pm cp lib/Event/idle.pm blib/lib/Event/idle.pm cp lib/Event/typemap blib/lib/Event/typemap cp lib/Event/signal.pm blib/lib/Event/signal.pm cp lib/Event/timer.pm blib/lib/Event/timer.pm cp lib/Event.pm blib/lib/Event.pm cp lib/Event/EventAPI.h blib/lib/Event/EventAPI.h cp lib/Event.pod blib/lib/Event.pod cp lib/Event/group.pm blib/lib/Event/group.pm cp lib/Event/generic.pm blib/lib/Event/generic.pm cp lib/Event/var.pm blib/lib/Event/var.pm Running Mkbootstrap for Event () chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 "/usr/bin/perl" "/usr/share/perl5/core_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/core_perl/ExtUtils/typemap' -typemap '/tmp/trizen-jeanette/perl-event/src/Event-1.28/lib/Event/typemap' Event.xs > Event.xsc mv Event.xsc Event.c cc -c -Ic -Ilib/Event -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -flto -DVERSION="1.28" -DXS_VERSION="1.28" -fPIC "-I/usr/lib/perl5/5.36/core_perl/CORE" Event.c In file included from Event.xs:269: c/var.c: In function 'pe_var_start': c/var.c:82:20: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 82 | mg->mg_virtual = &PL_vtbl_uvar; | ^ rm -f blib/arch/auto/Event/Event.so cc -shared -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -flto -L/usr/local/lib -fstack-protector-strong Event.o -o blib/arch/auto/Event/Event.so \ \
chmod 755 blib/arch/auto/Event/Event.so Manifying 3 pod documents ==> Starting check()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/attach_to.t ..... ok t/bored.t ......... ok t/callback.t ...... ok t/data.t .......... ok t/delete.t ........ ok t/eval.t .......... ok t/fifo.t .......... ok t/generic.t ....... ok t/group.t ......... ok t/hook.t .......... ok t/hup.t ........... ok t/idle.t .......... ok t/Inline.t ........ ok t/io.t ............ ok t/leak.t .......... ok t/leak2.t ......... ok t/loop.t .......... ok t/now.t ........... ok t/reenter.t ....... ok t/signal.t ........ ok t/timeout_cb.t .... ok t/timer.t ......... ok t/unconfigured.t .. ok t/var.t ........... ok All tests successful. Files=24, Tests=124, 11 wallclock secs ( 0.05 usr 0.03 sys + 2.34 cusr 0.66 csys = 3.08 CPU) Result: PASS ==> Entering fakeroot environment... ==> Starting package()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 Manifying 3 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/auto/Event/Event.so Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pod Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/var.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/group.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/EventAPI.h Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/timer.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/signal.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/typemap Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/idle.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/MakeMaker.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/io.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/type.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/Watcher.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pod Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event::generic.3pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event::MakeMaker.3pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event.3pm Appending installation info to /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/core_perl/perllocal.pod ==> Tidying install... -> Removing empty directories... -> Removing libtool files... -> Purging unwanted files... -> Removing static library files... -> Stripping unneeded symbols from binaries and libraries... -> Compressing man and info pages... ==> Checking for packaging issues... ==> Creating package "perl-event"... -> Generating .PKGINFO file... -> Generating .BUILDINFO file... -> Generating .MTREE file... -> Compressing package... ==> Leaving fakeroot environment. ==> Finished making: perl-event 1.28-1.1 (Fri 01 Jul 2022 22:50:21 CEST) ==> Cleaning up... :: Unable to find a built tarball for perl-event *** End of trizen -Sy perl-event
Jul 1 2022, Randy DuCharme via arch-general has written:
Use yay??
That did the trick. Thanks for the suggestions.
Best wishes,
Jeanette
randy@archlinux ~]$ yay -S perl-event :: Checking for conflicts... :: Checking for inner conflicts... [Aur:1] perl-event-1.28-1.1
:: (1/1) Downloaded PKGBUILD: perl-event 1 perl-event (Build Files Exist) ==> Diffs to show? ==> [N]one [A]ll [Ab]ort [I]nstalled [No]tInstalled or (1 2 3, 1-3, ^4) ==> :: (1/1) Parsing SRCINFO: perl-event ==> Making package: perl-event 1.28-1.1 (Fri 01 Jul 2022 03:59:38 PM CDT) ==> Retrieving sources... -> Downloading Event-1.28.tar.gz... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 5 100 5 0 0 10 0 --:--:-- --:--:-- --:--:-- 10 100 250k 100 250k 0 0 238k 0 0:00:01 0:00:01 --:--:-- 1104k ==> Validating source files with sha512sums... Event-1.28.tar.gz ... Passed ==> Making package: perl-event 1.28-1.1 (Fri 01 Jul 2022 03:59:41 PM CDT) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Found Event-1.28.tar.gz ==> Validating source files with sha512sums... Event-1.28.tar.gz ... Passed ==> Removing existing $srcdir/ directory... ==> Extracting sources... -> Extracting Event-1.28.tar.gz with bsdtar ==> Sources are ready. ==> Making package: perl-event 1.28-1.1 (Fri 01 Jul 2022 03:59:46 PM CDT) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> WARNING: Using existing $srcdir/ tree ==> Starting build()... Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Event Writing MYMETA.yml and MYMETA.json "/usr/bin/perl" "/usr/share/perl5/core_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/core_perl/ExtUtils/typemap' -typemap '/home/randy/.cache/yay/perl-event/src/Event-1.28/lib/Event/typemap' Event.xs
Event.xsc
Running Mkbootstrap for Event () chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 cp lib/Event.pm blib/lib/Event.pm cp lib/Event/type.pm blib/lib/Event/type.pm cp lib/Event/Watcher.pm blib/lib/Event/Watcher.pm cp lib/Event/EventAPI.h blib/lib/Event/EventAPI.h cp lib/Event/signal.pm blib/lib/Event/signal.pm cp lib/Event/typemap blib/lib/Event/typemap cp lib/Event/io.pm blib/lib/Event/io.pm cp lib/Event/group.pm blib/lib/Event/group.pm cp lib/Event.pod blib/lib/Event.pod cp lib/Event/generic.pod blib/lib/Event/generic.pod cp lib/Event/var.pm blib/lib/Event/var.pm cp lib/Event/generic.pm blib/lib/Event/generic.pm cp lib/Event/timer.pm blib/lib/Event/timer.pm cp lib/Event/MakeMaker.pm blib/lib/Event/MakeMaker.pm cp lib/Event/idle.pm blib/lib/Event/idle.pm mv Event.xsc Event.c cc -c -Ic -Ilib/Event -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -flto -DVERSION="1.28" -DXS_VERSION="1.28" -fPIC "-I/usr/lib/perl5/5.36/core_perl/CORE" Event.c In file included from Event.xs:269: c/var.c: In function ‘pe_var_start’: c/var.c:82:20: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 82 | mg->mg_virtual = &PL_vtbl_uvar; | ^ rm -f blib/arch/auto/Event/Event.so cc -shared -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -flto -L/usr/local/lib -fstack-protector-strong Event.o -o blib/arch/auto/Event/Event.so \ \
chmod 755 blib/arch/auto/Event/Event.so Manifying 3 pod documents ==> Starting check()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/attach_to.t ..... ok t/bored.t ......... ok t/callback.t ...... ok t/data.t .......... ok t/delete.t ........ ok t/eval.t .......... ok t/fifo.t .......... ok t/generic.t ....... ok t/group.t ......... ok t/hook.t .......... ok t/hup.t ........... ok t/idle.t .......... ok t/Inline.t ........ ok t/io.t ............ ok t/leak.t .......... ok t/leak2.t ......... ok t/loop.t .......... ok t/now.t ........... ok t/reenter.t ....... ok t/signal.t ........ ok t/timeout_cb.t .... ok t/timer.t ......... ok t/unconfigured.t .. ok t/var.t ........... ok All tests successful. Files=24, Tests=124, 12 wallclock secs ( 0.11 usr 0.02 sys + 3.05 cusr 0.38 csys = 3.56 CPU) Result: PASS ==> Entering fakeroot environment... ==> Starting package()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 Manifying 3 pod documents Appending installation info to /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/core_perl/perllocal.pod Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/auto/Event/Event.so Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pod Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/type.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/Watcher.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/EventAPI.h Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/signal.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/typemap Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/io.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/group.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pod Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/var.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/timer.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/MakeMaker.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/idle.pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/share/man/man3/Event.3pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/share/man/man3/Event::MakeMaker.3pm Installing /home/randy/.cache/yay/perl-event/pkg/perl-event/usr/share/man/man3/Event::generic.3pm ==> Tidying install... -> Removing empty directories... -> Removing libtool files... -> Purging unwanted files... -> Removing static library files... -> Stripping unneeded symbols from binaries and libraries... -> Compressing man and info pages... ==> Checking for packaging issues... ==> Creating package "perl-event"... -> Generating .PKGINFO file... -> Generating .BUILDINFO file... -> Generating .MTREE file... -> Compressing package... ==> Leaving fakeroot environment. ==> Finished making: perl-event 1.28-1.1 (Fri 01 Jul 2022 04:00:08 PM CDT) ==> Cleaning up... loading packages... resolving dependencies... looking for conflicting packages...
Packages (1) perl-event-1.28-1.1
Total Installed Size: 0.14 MiB
:: Proceed with installation? [Y/n] (1/1) checking keys in keyring [##################################################################] 100% (1/1) checking package integrity [##################################################################] 100% (1/1) loading package files [##################################################################] 100% (1/1) checking for file conflicts [##################################################################] 100% (1/1) checking available disk space [##################################################################] 100% :: Processing package changes... (1/1) installing perl-event [##################################################################] 100% :: Running post-transaction hooks... (1/2) Arming ConditionNeedsUpdate... (2/2) Warn about old perl modules [randy@archlinux ~]$
On 7/1/2022 3:58 PM, Jeanette C. via arch-general wrote:
Hey hey, this is a strange error. I tried installing perl-event, an AUR package with trizen: trizen -Sy perl-event The package downloads, comiles and tests, as far as I can see and finally fails with: :: Unable to find a built tarball for perl-event (below is the full output of the command) Does anyone have an idea how to fix this? Is this an issue that might occasionally arise?
Best wishes and tahnks,
Jeanette
*** Output of trizen -Sy perl-event :: Pacman command: /usr/bin/sudo /usr/bin/pacman -Sy :: Synchronising package databases... core downloading... extra downloading... community downloading... multilib downloading... realtime downloading... :: Pulling AUR changes: perl-event
:: Content of /tmp/trizen-jeanette/perl-event/PKGBUILD
# Maintainer: Brian Bidulock bidulock@Openss7.org # Contributor: John D Jones III <jnbek1972 -_AT_- g m a i l -_Dot_- com> # Generator : CPANPLUS::Dist::Arch 1.29
pkgname=perl-event pkgver=1.28 pkgrel=1.1 pkgdesc="Event loop processing" arch=('i686' 'x86_64') license=('PerlArtistic' 'GPL') options=('!emptydirs') makedepends=() url='http://search.mcpan.org/dist/Event' source=("http://search.mcpan.org/CPAN/authors/id/E/ET/ETJ/Event-$%7Bpkgver%7D.tar.gz")
sha512sums=('8c7e676c3f659f85ae53ff3b60142943c72881f101f2c66dfd1a7e47babfade0171b78a2062476b6e061f12370b279b73abbe3ab01b07d7088145fa9508e7d0c')
_distdir="Event-${pkgver}"
build() { ( export PERL_MM_USE_DEFAULT=1 PERL5LIB="" \ PERL_AUTOINSTALL=--skipdeps \ PERL_MM_OPT="INSTALLDIRS=vendor DESTDIR='$pkgdir'" \ PERL_MB_OPT="--installdirs vendor --destdir '$pkgdir'" \ MODULEBUILDRC=/dev/null
cd "$srcdir/$_distdir" /usr/bin/perl Makefile.PL make ) }
check() { cd "$srcdir/$_distdir" ( export PERL_MM_USE_DEFAULT=1 PERL5LIB="" make test ) }
_perl_depends() { # template start; name=perl-binary-module-dependency; version=1; if [[ $(find "$pkgdir/usr/lib/perl5/" -name "*.so") ]]; then _perlver_min=$(perl -e '$v = $^V->{version}; print $v->[0].".".($v->[1]);') _perlver_max=$(perl -e '$v = $^V->{version}; print $v->[0].".".($v->[1]+1);') depends+=("perl>=$_perlver_min" "perl<$_perlver_max") fi # template end; }
package() { cd "$srcdir/$_distdir" make install
find "$pkgdir" ( -name .packlist -o -name perllocal.pod ) -delete _perl_depends }
# Local Variables: # mode: shell-script # sh-basic-offset: 2 # End: # vim:set ts=2 sw=2 et:
Repository : AUR Name : perl-event Version : 1.28-1.1 Maintainer : bidulock URL : http://search.mcpan.org/dist/Event AUR URL : https://aur.archlinux.org/packages/perl-event License : PerlArtistic GPL Votes : 7 Popularity : 0% Installed : No Out Of Date : No Depends On : None Make Deps : None Check Deps : None Optional Deps : None Provides : None Conflicts With : None Replaces : None Package Base : perl-event Last Update : Thu Jun 2 03:58:45 2022 Description : Event loop processing
==> Making package: perl-event 1.28-1.1 (Fri 01 Jul 2022 22:50:05 CEST) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Found Event-1.28.tar.gz ==> Validating source files with sha512sums... Event-1.28.tar.gz ... Passed ==> Extracting sources... -> Extracting Event-1.28.tar.gz with bsdtar ==> Starting build()... Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Event Writing MYMETA.yml and MYMETA.json cp lib/Event/generic.pod blib/lib/Event/generic.pod cp lib/Event/Watcher.pm blib/lib/Event/Watcher.pm cp lib/Event/type.pm blib/lib/Event/type.pm cp lib/Event/io.pm blib/lib/Event/io.pm cp lib/Event/MakeMaker.pm blib/lib/Event/MakeMaker.pm cp lib/Event/idle.pm blib/lib/Event/idle.pm cp lib/Event/typemap blib/lib/Event/typemap cp lib/Event/signal.pm blib/lib/Event/signal.pm cp lib/Event/timer.pm blib/lib/Event/timer.pm cp lib/Event.pm blib/lib/Event.pm cp lib/Event/EventAPI.h blib/lib/Event/EventAPI.h cp lib/Event.pod blib/lib/Event.pod cp lib/Event/group.pm blib/lib/Event/group.pm cp lib/Event/generic.pm blib/lib/Event/generic.pm cp lib/Event/var.pm blib/lib/Event/var.pm Running Mkbootstrap for Event () chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 "/usr/bin/perl" "/usr/share/perl5/core_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/core_perl/ExtUtils/typemap' -typemap '/tmp/trizen-jeanette/perl-event/src/Event-1.28/lib/Event/typemap' Event.xs > Event.xsc mv Event.xsc Event.c cc -c -Ic -Ilib/Event -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -flto -DVERSION="1.28" -DXS_VERSION="1.28" -fPIC "-I/usr/lib/perl5/5.36/core_perl/CORE" Event.c In file included from Event.xs:269: c/var.c: In function 'pe_var_start': c/var.c:82:20: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 82 | mg->mg_virtual = &PL_vtbl_uvar; | ^ rm -f blib/arch/auto/Event/Event.so cc -shared -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -flto -L/usr/local/lib -fstack-protector-strong Event.o -o blib/arch/auto/Event/Event.so \ \
chmod 755 blib/arch/auto/Event/Event.so Manifying 3 pod documents ==> Starting check()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/attach_to.t ..... ok t/bored.t ......... ok t/callback.t ...... ok t/data.t .......... ok t/delete.t ........ ok t/eval.t .......... ok t/fifo.t .......... ok t/generic.t ....... ok t/group.t ......... ok t/hook.t .......... ok t/hup.t ........... ok t/idle.t .......... ok t/Inline.t ........ ok t/io.t ............ ok t/leak.t .......... ok t/leak2.t ......... ok t/loop.t .......... ok t/now.t ........... ok t/reenter.t ....... ok t/signal.t ........ ok t/timeout_cb.t .... ok t/timer.t ......... ok t/unconfigured.t .. ok t/var.t ........... ok All tests successful. Files=24, Tests=124, 11 wallclock secs ( 0.05 usr 0.03 sys + 2.34 cusr 0.66 csys = 3.08 CPU) Result: PASS ==> Entering fakeroot environment... ==> Starting package()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 Manifying 3 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/auto/Event/Event.so Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pod Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/var.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/group.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/EventAPI.h Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/timer.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/signal.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/typemap Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/idle.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/MakeMaker.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/io.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/type.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/Watcher.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pod Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event::generic.3pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event::MakeMaker.3pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event.3pm Appending installation info to /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/core_perl/perllocal.pod ==> Tidying install... -> Removing empty directories... -> Removing libtool files... -> Purging unwanted files... -> Removing static library files... -> Stripping unneeded symbols from binaries and libraries... -> Compressing man and info pages... ==> Checking for packaging issues... ==> Creating package "perl-event"... -> Generating .PKGINFO file... -> Generating .BUILDINFO file... -> Generating .MTREE file... -> Compressing package... ==> Leaving fakeroot environment. ==> Finished making: perl-event 1.28-1.1 (Fri 01 Jul 2022 22:50:21 CEST) ==> Cleaning up... :: Unable to find a built tarball for perl-event *** End of trizen -Sy perl-event
-- Randall DuCharme (Radio AD5GB) Powered entirely by Open Source software.
Hi Jeanette,
I know you know better :p.
It's probably not a trizen issue, but you never know ;).
I'm still addicted to yaourt and it usually doesn't fail while already completely out of date.
_If_ yaourt fails, I first try to build with 'makepkg', before I add a comment to the AUR and maybe also request help at aur-general@lists.archlinux.org , a forum, let alone arch-general@lists.archlinux.org .
Again, it's probably not related to the AUR helper you are using, but consider to try 'makepkg' first ;) and report back after doing so.
Regards, Ralf
arch-general@lists.archlinux.org