From: Matthew Monaco
There are a couple of issues with the asciidoc. I'm also really tired
right now so I'm sure there's plenty of awkward wording (this msg
included).
The format should be described almost completely in the manpage. The
only thing I think I'm leaving out intentionally right now though is the
support for dev:offset:length for the key field.
The example file should include enough information to be useful, but
little enough to be a good overview. And certainly not enough to be
dangerous.
---
crypttab.5.txt | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
crypttab.example | 17 +++++++++
2 files changed, 121 insertions(+)
create mode 100644 crypttab.5.txt
create mode 100644 crypttab.example
diff --git a/crypttab.5.txt b/crypttab.5.txt
new file mode 100644
index 0000000..8ce91a2
--- /dev/null
+++ b/crypttab.5.txt
@@ -0,0 +1,104 @@
+////
+vim:set ft=asciidoc noet tw=72:
+////
+crypttab(5)
+=============
+
+Name
+----
+crypttab - static information about dm-crypt filesystems
+
+Synopsis
+--------
+/etc/crypttab
+
+Description
+-----------
+The file *crypttab* contains information about encrypted volumes.
+*crypttab* is intended to be read by *cryptmount*, and only written to
+by human administrators. Each 'volume' is described on a separate line
+by four fields. Fields are separated by whitespace. Empty lines and
+lines beginning with a *#* are ignored.
+
+The fields are
+'name' 'device' ['key' ['options']]
+
+'name'::
+
+The name of the 'volume' which will appear at
+*/dev/mapper/*'name'. This must be a plain filename without any
+directory components.
+
+'device'::
+
+An absolute path, UUID, PARTUUID, or LABEL to a device or file which
+will be mapped to */dev/mapper/*'name'.
+
+'key' := *-* | 'keydevice'[\[*:*'fstype'] *:*'keyfile']::
+
+This field may be blank or a *-* for interactive passwords. 'keydevice'
+may be an absolute path, UUID, PARTUUID, or LABEL to a device or file
+which contains the passphrase. If 'keyfile' (and 'fstype') are given,
+'keydevice' will be mounted if it isn't already. 'keyfile' is an
+absolute path relative to the root of the file system on 'keydevice'.
++
+For compatibility with other formats, *ASK* and *none* may be used in
+place of *-* and *SWAP* is an idiom for */dev/urandom* and the *swap*
+option. See *OPTIONS*.
++
+*Note:* A literal password in this field is *not* supported.
+
+'options' := 'key'[*=*'value'] | *%*'tag' | 'options'*,*'options'::
+
+The 'options' field is a comma separated list. It is described in detail
+below.
++
+For compatibility with other formats, if the first character is *-* then
+the entire field is interpretted as a literal command line for
+*cryptsetup*.
+
+Options
+-------
+
+Most options have a one-to-one correspondence to *cryptsetup* command
+line options and are simply reformatted. For example to use *cryptsetup
+--cipher/-c* 'cipher' the options *cipher*='cipher' or *c*='cipher' may
+be used. Other options which are used by *cryptmount* are:
+
+*swap*::
+
+Run *mkswap*(8) on */dev/mapper/*'name'.
+
+*tmp*[='fs']::
+
+Run *mkfs*(8) with the file system type of 'fs' on */dev/mapper/*'name'.
+The default 'fs' is *ext4*.
+
+*noauto*::
+
+Do not automatically map this 'volume'.
+
+*size*='size'::
+
+See *cryptsetup(8) --key-size*. Other formats for *crypttab* use *size*
+for the amount of bytes to read from *key*.
+
+*device-size*='size'::
+
+See *cryptsetup(8) --size*. This accounts for the quirk with *size*.
+
+*%*'tag'::
+
+Tags can be used to include or exclude a group of volumes when running
+*cryptmount(8)*. Additionally, *cryptmount* automatically adds to
+'volumes', with a key of */dev/urandom*, a *%random* tag. This tag is used
+by the Arch Linux initscripts to delay the mapping of these volumes
+until after the random seed has been restored during boot.
+
+See Also
+--------
+*cryptmount*(8), *cryptsetup*(8)
+
+Authors
+-------
+Matt Monaco
diff --git a/crypttab.example b/crypttab.example
new file mode 100644
index 0000000..80649db
--- /dev/null
+++ b/crypttab.example
@@ -0,0 +1,17 @@
+# crypttab: mappings for encrypted volumes
+#
+# see crypttab(5) for the full details
+#
+# NAME - name of volume, /dev/mapper/NAME
+# DEVICE - absolute path, UUID, PARTUUID, or LABEL of device or file
+# KEY - -|<file>|<device>[[:fstype]:<file>]
+# OPTIONS - options for cryptsetup, 'swap' runs mkswap after mapping,
+# 'noauto' prevents automatic mapping
+
+#NAME DEVICE KEY OPTIONS
+#root /dev/sda1
+#usr /dev/sda2 - allow-discards
+#home /dev/sdb1 LABEL=usbdrv:/key
+#swap /dev/sdb2 /dev/urandom swap,cipher=aes-cbc-essiv:sha256,size=128
+#data UUID=82d4f2... - noauto
+#backup /home/backup LABEL=usbdrv2 noauto,keyfile-offset=500,keyfile-size=1024
--
1.7.10.2