---
src/core/libs/lib-ui-interactive.sh | 253 +++++++++++++++++------------------
1 files changed, 126 insertions(+), 127 deletions(-)
diff --git a/src/core/libs/lib-ui-interactive.sh b/src/core/libs/lib-ui-interactive.sh
index a2d5759..144749a 100644
--- a/src/core/libs/lib-ui-interactive.sh
+++ b/src/core/libs/lib-ui-interactive.sh
@@ -847,12 +847,12 @@ interactive_runtime_network() {
interactive_install_bootloader () {
ask_option Grub "Choose bootloader" "Which bootloader would you like to use? Grub is the Arch default." required \
- "Grub" "Use the GRUB bootloader (default)" \
- "None" "\Zb\Z1Warning\Z0\ZB: you must install your own bootloader!" || return 1
+ "Grub" "Use the GRUB bootloader (default)" \
+ "None" "\Zb\Z1Warning\Z0\ZB: you must install your own bootloader!" || return 1
bl=`tr '[:upper:]' '[:lower:]' <<< "$ANSWER_OPTION"`
[ "$bl" != grub ] && return 0
- GRUB_OK=0
+ GRUB_OK=0
interactive_grub
}
@@ -860,140 +860,140 @@ interactive_grub() {
get_grub_map
[ ! -f $grubmenu ] && show_warning "No grub?" "Error: Couldn't find $grubmenu. Is GRUB installed?" && return 1
- debug FS "starting interactive_grub"
- # try to auto-configure GRUB...
- debug 'UI-INTERACTIVE' "install_grub \$PART_ROOT $PART_ROOT \$GRUB_OK $GRUB_OK"
+ debug FS "starting interactive_grub"
+ # try to auto-configure GRUB...
+ debug 'UI-INTERACTIVE' "install_grub \$PART_ROOT $PART_ROOT \$GRUB_OK $GRUB_OK"
if get_device_with_mount '/' && [ "$GRUB_OK" != '1' ] ; then
GRUB_OK=0
PART_ROOT=$ANSWER_DEVICE
# look for a separately-mounted /boot partition
- # This could be used better, maybe we use a better variable name cause
- # we use this later in many things in workflow.
- # Currently we have bootdev as a device if we have a seperate /boot or empty
- # if no seperate /boot. Where our /boot realy lives is important later
- # to build the grub: root (hdx,y) part.
- # So maybe we set a flag variable like: sepboot=true|false and set bootdev to either
- # the partition with seperate /boot or to $PART_ROOT.
- # So that bootdev is always our real partition with /boot....
- bootdev=$(mount | grep $var_TARGET_DIR/boot | cut -d' ' -f 1)
+ # This could be used better, maybe we use a better variable name cause
+ # we use this later in many things in workflow.
+ # Currently we have bootdev as a device if we have a seperate /boot or empty
+ # if no seperate /boot. Where our /boot realy lives is important later
+ # to build the grub: root (hdx,y) part.
+ # So maybe we set a flag variable like: sepboot=true|false and set bootdev to either
+ # the partition with seperate /boot or to $PART_ROOT.
+ # So that bootdev is always our real partition with /boot....
+ bootdev=$(mount | grep $var_TARGET_DIR/boot | cut -d' ' -f 1)
# check if bootdev or PART_ROOT is on a md raid array
- # This dialog is only shown when we detect / or /boot on a raid device.
+ # This dialog is only shown when we detect / or /boot on a raid device.
if device_is_raid $bootdev || device_is_raid $PART_ROOT; then
ask_yesno "Do you have your system installed on software raid?\nAnswer 'YES' to install grub to another hard disk." no
if [ $? -eq 0 ]; then
onraid=true
- debug FS "onraid is selected"
+ debug FS "onraid is selected"
fi
fi
- # Create and edit the grub menu.lst
- interactive_bootloader_menu "GRUB" $grubmenu
+ # Create and edit the grub menu.lst
+ interactive_bootloader_menu "GRUB" $grubmenu
DEVS="$(findblockdevices '_ ')"
- if [ "$DEVS" = " " ]; then
- notify "No hard drives were found"
- return 1
- fi
- # copy initial grub files into installed system
- cp -a $var_TARGET_DIR/usr/lib/grub/i386-pc/* $var_TARGET_DIR/boot/grub/
- sync
- # freeze xfs filesystems to enable grub installation on xfs filesystems
- for xfsdev in $(blkid -t TYPE=xfs -o device); do
- mnt=$(mount | grep $xfsdev | cut -d' ' -f 3)
- if [ $mnt = "$var_TARGET_DIR/boot" -o $mnt = "$var_TARGET_DIR/" ]; then
- /usr/sbin/xfs_freeze -f $mnt > /dev/null 2>&1
- fi
- done
-
- if [ ! $onraid ]; then
- # Set boot partition to the device where our /boot lives.
- [ -z $bootdev ] && bootpart=$PART_ROOT || bootpart=$bootdev
- ask_option no "Boot device selection" "Select the boot device where the GRUB bootloader will be installed (usually the MBR and not a partition)." required $DEVS || return 1
- bootdev=$ANSWER_OPTION
- boothd=$(echo $bootdev | cut -c -8)
- interactive_grub_install $bootpart $bootdev $boothd
- if [ $? -eq 0 ]; then
- GRUB_OK=1
- fi
- else
- # Raid special
- # The bootpart and bootdev should not be changed when setup grub on all raid array members.
- # Instead the device is mapped via grub parameter device
- # So a grub setup on MBR sda/sdb with /boot on sda1/sdb1 should always be done like:
- # device (hd0) /dev/sd(a|b)
- # root (hd0,0)
- # setup (hd0)
-
- # get md device either if we use separate /boot or not.
- [ -z $bootdev ] && local md=$PART_ROOT || local md=$bootdev
-
- local ask_str="Do you want to install grub to the MBR of each harddisk from your BOOT array "$md" ? (recommended)"
- ask_yesno "$ask_str" yes
- if [ $? -eq 0 ]; then
+ if [ "$DEVS" = " " ]; then
+ notify "No hard drives were found"
+ return 1
+ fi
+ # copy initial grub files into installed system
+ cp -a $var_TARGET_DIR/usr/lib/grub/i386-pc/* $var_TARGET_DIR/boot/grub/
+ sync
+ # freeze xfs filesystems to enable grub installation on xfs filesystems
+ for xfsdev in $(blkid -t TYPE=xfs -o device); do
+ mnt=$(mount | grep $xfsdev | cut -d' ' -f 3)
+ if [ $mnt = "$var_TARGET_DIR/boot" -o $mnt = "$var_TARGET_DIR/" ]; then
+ /usr/sbin/xfs_freeze -f $mnt > /dev/null 2>&1
+ fi
+ done
+
+ if [ ! $onraid ]; then
+ # Set boot partition to the device where our /boot lives.
+ [ -z $bootdev ] && bootpart=$PART_ROOT || bootpart=$bootdev
+ ask_option no "Boot device selection" "Select the boot device where the GRUB bootloader will be installed (usually the MBR and not a partition)." required $DEVS || return 1
+ bootdev=$ANSWER_OPTION
+ boothd=$(echo $bootdev | cut -c -8)
+ interactive_grub_install $bootpart $bootdev $boothd
+ if [ $? -eq 0 ]; then
+ GRUB_OK=1
+ fi
+ else
+ # Raid special
+ # The bootpart and bootdev should not be changed when setup grub on all raid array members.
+ # Instead the device is mapped via grub parameter device
+ # So a grub setup on MBR sda/sdb with /boot on sda1/sdb1 should always be done like:
+ # device (hd0) /dev/sd(a|b)
+ # root (hd0,0)
+ # setup (hd0)
+
+ # get md device either if we use separate /boot or not.
+ [ -z $bootdev ] && local md=$PART_ROOT || local md=$bootdev
+
+ local ask_str="Do you want to install grub to the MBR of each harddisk from your BOOT array "$md" ? (recommended)"
+ ask_yesno "$ask_str" yes
+ if [ $? -eq 0 ]; then
slaves=$(mdraid_all_slaves $md)
- for slave in $slaves; do
- boothd=$(echo $slave | cut -c -8)
- bootpart=$(mdraid_slave0 $md)
- bootdev=$(echo $bootpart | cut -c -8)
- interactive_grub_install $bootpart $bootdev $boothd
- if [ $? -eq 0 ]; then
- GRUB_OK=1
- fi
- done
- else
- # This part needs more attention... User could select here only
- # a other blockdevice to install grub into... But our grub rootdevice
- # is not selectable, cause it is determined either from PART_ROOT or
- # bootdev.
- # Maybe better we leave the user alone and poke him to use a grub
- # shell if he want do something unusefull and not install grub in
- # aech MBR of affected HD in raid array....
- local USERHAPPY=0
- while [ "$USERHAPPY" = 0 ]
- do
- ask_option no "Boot device selection" "Select the boot device where the GRUB bootloader will be installed." required $DEVS DONE _
- [ $? -gt 0 ] && USERHAPPY=1 && break
- [ "$ANSWER_OPTION" == DONE ] && USERHAPPY=1 && break
- bootdev=$ANSWER_OPTION
- boothd=$(echo $bootdev | cut -c -8)
- bootpart=$(mdraid_slave0 $md)
- bootdev=$(echo $bootpart | cut -c -8)
- interactive_grub_install $bootpart $bootdev $boothd
- if [ $? -eq 0 ]; then
- GRUB_OK=1
- fi
- done
+ for slave in $slaves; do
+ boothd=$(echo $slave | cut -c -8)
+ bootpart=$(mdraid_slave0 $md)
+ bootdev=$(echo $bootpart | cut -c -8)
+ interactive_grub_install $bootpart $bootdev $boothd
+ if [ $? -eq 0 ]; then
+ GRUB_OK=1
+ fi
+ done
+ else
+ # This part needs more attention... User could select here only
+ # a other blockdevice to install grub into... But our grub rootdevice
+ # is not selectable, cause it is determined either from PART_ROOT or
+ # bootdev.
+ # Maybe better we leave the user alone and poke him to use a grub
+ # shell if he want do something unusefull and not install grub in
+ # aech MBR of affected HD in raid array....
+ local USERHAPPY=0
+ while [ "$USERHAPPY" = 0 ]
+ do
+ ask_option no "Boot device selection" "Select the boot device where the GRUB bootloader will be installed." required $DEVS DONE _
+ [ $? -gt 0 ] && USERHAPPY=1 && break
+ [ "$ANSWER_OPTION" == DONE ] && USERHAPPY=1 && break
+ bootdev=$ANSWER_OPTION
+ boothd=$(echo $bootdev | cut -c -8)
+ bootpart=$(mdraid_slave0 $md)
+ bootdev=$(echo $bootpart | cut -c -8)
+ interactive_grub_install $bootpart $bootdev $boothd
+ if [ $? -eq 0 ]; then
+ GRUB_OK=1
+ fi
+ done
fi
- if [ "$bootpart" = "" ]; then
- if [ "$PART_ROOT" = "" ]; then
- ask_string "Enter the full path to your root device" "/dev/sda3" || return 1
- bootpart=$ANSWER_STRING
- else
- bootpart=$PART_ROOT
- fi
- boothd=$(echo $bootpart | cut -c -8)
- interactive_grub_install $bootpart $bootdev $boothd
- if [ $? -eq 0 ]; then
- GRUB_OK=1
- fi
- fi
- fi
- # unfreeze xfs filesystems
- for xfsdev in $(blkid -t TYPE=xfs -o device); do
- mnt=$(mount | grep $xfsdev | cut -d' ' -f 3)
- if [ $mnt = "$var_TARGET_DIR/boot" -o $mnt = "$var_TARGET_DIR/" ]; then
- /usr/sbin/xfs_freeze -u $mnt > /dev/null 2>&1
- fi
- done
-
- if [ "$GRUB_OK" == "1" ]; then
- notify "GRUB was successfully installed."
- else
- show_warning "Grub installation failure" "GRUB was NOT successfully installed."
- return 1
- fi
- return 0
- fi
+ if [ "$bootpart" = "" ]; then
+ if [ "$PART_ROOT" = "" ]; then
+ ask_string "Enter the full path to your root device" "/dev/sda3" || return 1
+ bootpart=$ANSWER_STRING
+ else
+ bootpart=$PART_ROOT
+ fi
+ boothd=$(echo $bootpart | cut -c -8)
+ interactive_grub_install $bootpart $bootdev $boothd
+ if [ $? -eq 0 ]; then
+ GRUB_OK=1
+ fi
+ fi
+ fi
+ # unfreeze xfs filesystems
+ for xfsdev in $(blkid -t TYPE=xfs -o device); do
+ mnt=$(mount | grep $xfsdev | cut -d' ' -f 3)
+ if [ $mnt = "$var_TARGET_DIR/boot" -o $mnt = "$var_TARGET_DIR/" ]; then
+ /usr/sbin/xfs_freeze -u $mnt > /dev/null 2>&1
+ fi
+ done
+
+ if [ "$GRUB_OK" == "1" ]; then
+ notify "GRUB was successfully installed."
+ else
+ show_warning "Grub installation failure" "GRUB was NOT successfully installed."
+ return 1
+ fi
+ return 0
+ fi
}
generate_grub_menulst() {
@@ -1080,14 +1080,14 @@ interactive_bootloader_menu() {
if [[ $1 = GRUB ]]; then
generate_grub_menulst
fi
-
+
grep -q '^/dev/mapper' $TMP_FSTAB && local helptext=" /dev/mapper/ users: Pay attention to the kernel line!"
notify "Before installing $1, you must review the configuration file. You will now be put into the editor. After you save your changes and exit the editor, you can install $1.$helptext"
-
+
if [[ -z $EDITOR ]]; then
seteditor || return 1
fi
-
+
$EDITOR $2
}
@@ -1102,7 +1102,7 @@ interactive_grub_install () {
# The boothd - Only on md raid setups this differs from bootdev
# These values get parsed either from values we have already or from
# user input. Later they will converted to grub-legacy notation.
-
+
# Convert to grub-legacy notation
local bootpart=$(mapdev $1)
if [ -z "$bootpart" ]; then
@@ -1118,7 +1118,7 @@ interactive_grub_install () {
debug FS "bootpart: $bootpart"
debug FS "bootdev: $bootdev"
debug FS "boothd: $boothd"
-
+
$var_TARGET_DIR/sbin/grub --no-floppy --batch >/tmp/grub.log 2>&1 <