[arch-general] Problem installing webcam

[Jon Kristian Nilsen]

Hmm, and you connected the camera before doing lspci? the reason im asking
is because I can't see it in that list.

On Thu, May 15, 2008 at 6:33 PM, Mordechai Peller <mep at pellerweb.com> wrote:

>  Jon Kristian Nilsen wrote:
>
> well did you load the correct module then?
>
> If the module isn't included in the kernel, probably not. Which module
> should I have loaded?
>
> What's the output of lspci ?
>
> 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub
> (rev 02)
> 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port
> (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated
> Graphics Controller (rev 02)
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller (rev 01)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
> 1 (rev 01)
> 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
> 2 (rev 01)
> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
> 3 (rev 01)
> 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
> 4 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #3 (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
> Controller #4 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
> Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
> Interface Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
> Controller (rev 01)
> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA
> IDE Controller (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
> 01)
> 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B
> PCI Express Gigabit Ethernet controller (rev 01)
>
>
>
>
> On Thu, May 15, 2008 at 5:58 PM, Mordechai Peller <mep at pellerweb.com>
> wrote:
>
>> Thanks, but no change.
>>
>> Jon Kristian Nilsen wrote:
>>
>>> I belive it is incuded in the gspcav1 package, so just do a pacman -S
>>> gspcav1
>>>
>>>
>>>  On Thu, May 15, 2008 at 5:19 PM, Mordechai Peller <mep at pellerweb.com<mailto:
>>> mep at pellerweb.com>> wrote:
>>>
>>>    Hi,
>>>
>>>    I'm trying to install a sn9c201 webcam, but I can't find any
>>>    drivers. On
>>>    the wiki, the sn9c102 driver is listed, but not the 201. dmesg only
>>>    listed the following:
>>>
>>>    usb 5-1: new high speed USB device using ehci_hcd and address 42
>>>    usb 5-1: configuration #1 chosen from 1 choice
>>>
>>>    The device only came with (Linux) drivers for Fedora Core 4.
>>>
>>>    Thanks.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://archlinux.org/pipermail/arch-general/attachments/20080515/31145ee0/attachment.htm>