[arch-general] Problem installing webcam

[Jon Kristian Nilsen]

Ouch, it's lsusb, hehe i must be tired;)
Just post the output of lsusb

On Thu, May 15, 2008 at 7:22 PM, Jon Kristian Nilsen <jokr.nilsen at gmail.com>
wrote:

> Hmm, and you connected the camera before doing lspci? the reason im asking
> is because I can't see it in that list.
>
>
> On Thu, May 15, 2008 at 6:33 PM, Mordechai Peller <mep at pellerweb.com>
> wrote:
>
>>  Jon Kristian Nilsen wrote:
>>
>> well did you load the correct module then?
>>
>> If the module isn't included in the kernel, probably not. Which module
>> should I have loaded?
>>
>> What's the output of lspci ?
>>
>> 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller
>> Hub (rev 02)
>> 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port
>> (rev 02)
>> 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated
>> Graphics Controller (rev 02)
>> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
>> Definition Audio Controller (rev 01)
>> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
>> Port 1 (rev 01)
>> 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
>> Port 2 (rev 01)
>> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
>> Port 3 (rev 01)
>> 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
>> Port 4 (rev 01)
>> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
>> Controller #1 (rev 01)
>> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
>> Controller #2 (rev 01)
>> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
>> Controller #3 (rev 01)
>> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
>> Controller #4 (rev 01)
>> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
>> Controller (rev 01)
>> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
>> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
>> Interface Bridge (rev 01)
>> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
>> Controller (rev 01)
>> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA
>> IDE Controller (rev 01)
>> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
>> (rev 01)
>> 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B
>> PCI Express Gigabit Ethernet controller (rev 01)
>>
>>
>>
>>
>> On Thu, May 15, 2008 at 5:58 PM, Mordechai Peller <mep at pellerweb.com>
>> wrote:
>>
>>> Thanks, but no change.
>>>
>>> Jon Kristian Nilsen wrote:
>>>
>>>> I belive it is incuded in the gspcav1 package, so just do a pacman -S
>>>> gspcav1
>>>>
>>>>
>>>>  On Thu, May 15, 2008 at 5:19 PM, Mordechai Peller <mep at pellerweb.com<mailto:
>>>> mep at pellerweb.com>> wrote:
>>>>
>>>>    Hi,
>>>>
>>>>    I'm trying to install a sn9c201 webcam, but I can't find any
>>>>    drivers. On
>>>>    the wiki, the sn9c102 driver is listed, but not the 201. dmesg only
>>>>    listed the following:
>>>>
>>>>    usb 5-1: new high speed USB device using ehci_hcd and address 42
>>>>    usb 5-1: configuration #1 chosen from 1 choice
>>>>
>>>>    The device only came with (Linux) drivers for Fedora Core 4.
>>>>
>>>>    Thanks.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://archlinux.org/pipermail/arch-general/attachments/20080515/6ea64f50/attachment.htm>