[arch-general] [linux-lts] unable to auto mount some usb device

[ShichaoGao]

I'm using Gnome and cat /var/log/messages.log shows following:

Jun 11 00:46:33 localhost kernel: [27115.671006] sd 6:0:0:0: [sdc]  
15564800 512-byte logical blocks: (7.96 GB/7.42 GiB)
Jun 11 00:46:33 localhost kernel: [27115.675124] sd 6:0:0:0: [sdc] Write  
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 11 00:46:33 localhost kernel: [27115.892537]  sdc: sdc1
Jun 11 00:46:33 localhost kernel: [27115.915102] sd 6:0:0:0: [sdc] Device  
not ready
Jun 11 00:46:33 localhost kernel: [27115.915106] sd 6:0:0:0: [sdc]   
Result: hostbyte=0x00 driverbyte=0x08
Jun 11 00:46:33 localhost kernel: [27115.915110] sd 6:0:0:0: [sdc]  Sense  
Key : 0x2 [current]
Jun 11 00:46:33 localhost kernel: [27115.915114] sd 6:0:0:0: [sdc]   
ASC=0x3a ASCQ=0x0
Jun 11 00:46:33 localhost kernel: [27115.915118] sd 6:0:0:0: [sdc] CDB:  
cdb[0]=0x28: 28 00 00 00 00 08 00 00 08 00
Jun 11 00:46:33 localhost kernel: [27115.918252] sdc: detected capacity  
change from 7969177600 to 0
Jun 11 00:46:33 localhost kernel: [27115.922734] sd 6:0:0:0: [sdc] Device  
not ready
Jun 11 00:46:33 localhost kernel: [27115.922737] sd 6:0:0:0: [sdc]   
Result: hostbyte=0x00 driverbyte=0x08
Jun 11 00:46:33 localhost kernel: [27115.922740] sd 6:0:0:0: [sdc]  Sense  
Key : 0x2 [current]
Jun 11 00:46:33 localhost kernel: [27115.922743] sd 6:0:0:0: [sdc]   
ASC=0x3a ASCQ=0x0
Jun 11 00:46:33 localhost kernel: [27115.922745] sd 6:0:0:0: [sdc] CDB:  
cdb[0]=0x28: 28 00 00 00 00 08 00 00 08 00
Jun 11 00:46:45 localhost kernel: [27128.566067] usb 1-1: USB disconnect,  
device number 6
Jun 11 00:46:46 localhost kernel: [27128.590184] sd 6:0:0:0: [sdc]  
Synchronizing SCSI cache
Jun 11 00:46:46 localhost kernel: [27128.590232] sd 6:0:0:0: [sdc]   
Result: hostbyte=0x01 driverbyte=0x00
Jun 11 00:47:17 localhost dbus[438]: [system] Failed to activate service  
'org.freedesktop.Avahi': timed out

A successful one:

Jun 11 00:55:16 localhost kernel: [27639.560076] usb 1-1: new high speed  
USB device number 8 using ehci_hcd
Jun 11 00:55:17 localhost kernel: [27639.712751] scsi8 : usb-storage  
1-1:1.0
Jun 11 00:55:18 localhost kernel: [27640.710853] scsi 8:0:0:0:  
Direct-Access     Kingston DataTraveler G2  1.00 PQ: 0 ANSI: 2
Jun 11 00:55:18 localhost kernel: [27640.713461] sd 8:0:0:0: [sdc] 3905314  
512-byte logical blocks: (1.99 GB/1.86 GiB)
Jun 11 00:55:18 localhost kernel: [27640.714083] sd 8:0:0:0: [sdc] Write  
Protect is off
Jun 11 00:55:18 localhost kernel: [27640.718838]  sdc:
Jun 11 00:55:18 localhost kernel: [27640.721347] sd 8:0:0:0: [sdc]  
Attached SCSI removable disk
Jun 11 00:55:18 localhost udisksd[860]: Mounted /dev/sdc at  
/run/media/gsc/9AE9-0664 on behalf of uid 1000

On Mon, 11 Jun 2012 00:16:56 +0800, Øyvind Heggstad  
<mrelendig at har-ikkje.net> wrote:

> On Sun, 10 Jun 2012 17:03:53 +0800
> GSC <xgdgsc at gmail.com> wrote:
>
>> After recent update of linux-lts to 3.0.33, it fails to auto mount my
>> android device as usb storage(moto atrix2). My other usb devices  are
>> auto mounted successfully, just this one fail to auto mount every
>> time. It can be manually mount successfully. And I tried linux
>> kernel(3.3.8), auto mounted successfully. Only in current linux-lts
>> the device fail to automatically mount every time. Any one
>> experiencing the same? Which log should I analyse to solve it?
>
> That would depend on just how you are automounting it.
>