October 2013 - Arch-projects - lists.archlinux.org

[arch-projects] [netctl][PATCH 0/2] wifi-menu: handle rfkill switches.
by Ivan Shapovalov 27 Feb '14

27 Feb '14

This is an usability improvement that makes wifi-menu to temporarily enable the interface's rfkill switch before doing a network scan. I don't think that this is too much of automatism and "software being smart", because it honors existing per-interface rfkill settings, so it is just in line with the rest of netctl's wireless support. Ivan Shapovalov (2): rfkill: add rf_is_enabled (query current rfkill state) wifi-menu: handle interface's rfkill switch src/lib/rfkill | 13 +++++++++++++ src/wifi-menu | 19 ++++++++++++++++++- 2 files changed, 31 insertions(+), 1 deletion(-) -- 1.8.4

3 8

[arch-projects] [mkinitcpio][PATCH] kernel-install: add hook
by Tom Gundersen 13 Dec '13

13 Dec '13

This will allow systemd's kernel-install script to generate and install an initrd as per the freedesktop boot loader specs. See kernel-install(8) for details. Notice that 'profiles' are not used. This will eventually be hooked up so that calling "make install" from a kernel build will do the right thing. Signed-off-by: Tom Gundersen <teg(a)jklm.no> --- 50-mkinitcpio.install | 12 ++++++++++++ Makefile | 3 +++ 2 files changed, 15 insertions(+) create mode 100755 50-mkinitcpio.install diff --git a/50-mkinitcpio.install b/50-mkinitcpio.install new file mode 100755 index 0000000..7cd195e --- /dev/null +++ b/50-mkinitcpio.install @@ -0,0 +1,12 @@ +#!/bin/sh + +case "$1" in + add) + mkinitcpio -k "$2" -g "$3"/initrd + ;; + remove) + rm -f -- "$3"/initrd + ;; +esac + +# vim: set ft=sh ts=4 sw=4 et: diff --git a/Makefile b/Makefile index 633dd63..1b933c9 100644 --- a/Makefile +++ b/Makefile @@ -10,6 +10,7 @@ DIRS = \ /usr/lib/initcpio/hooks \ /usr/lib/initcpio/install \ /usr/lib/initcpio/udev \ + /usr/lib/kernel/install.d \ /usr/share/man/man8 \ /usr/share/man/man5 \ /usr/share/man/man1 \ @@ -48,6 +49,8 @@ install: all cp -at $(DESTDIR)/usr/lib/initcpio hooks install install -m644 -t $(DESTDIR)/usr/share/mkinitcpio mkinitcpio.d/* + install -m755 50-mkinitcpio.install $(DESTDIR)/usr/lib/kernel/install.d/50-mkinitcpio.install + install -m644 man/mkinitcpio.8 $(DESTDIR)/usr/share/man/man8/mkinitcpio.8 install -m644 man/mkinitcpio.conf.5 $(DESTDIR)/usr/share/man/man5/mkinitcpio.conf.5 install -m644 man/lsinitcpio.1 $(DESTDIR)/usr/share/man/man1/lsinitcpio.1 -- 1.8.4

3 4

[arch-projects] [namcap][PATCH] add two rules which check if a PKGBUILD for vcs packages contains the correct makedepends and conflicts array
by Jelle van der Waa 07 Nov '13

07 Nov '13

--- Namcap/rules/__init__.py | 3 ++- Namcap/rules/vcspackages.py | 43 +++++++++++++++++++++++++++++++++++++++++++ namcap-tags | 3 +++ 3 files changed, 48 insertions(+), 1 deletion(-) create mode 100644 Namcap/rules/vcspackages.py diff --git a/Namcap/rules/__init__.py b/Namcap/rules/__init__.py index f7780d2..62c2617 100644 --- a/Namcap/rules/__init__.py +++ b/Namcap/rules/__init__.py @@ -60,7 +60,8 @@ from . import ( pkginfo, pkgnameindesc, sfurl, - splitpkgbuild + splitpkgbuild, + vcspackages ) all_rules = {} diff --git a/Namcap/rules/vcspackages.py b/Namcap/rules/vcspackages.py new file mode 100644 index 0000000..041ddf9 --- /dev/null +++ b/Namcap/rules/vcspackages.py @@ -0,0 +1,43 @@ +# +# namcap rules - vcspackages +# Copyright (C) 2013 Jelle van der Waa <jelle(a)vdwaa.nl> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# + +from Namcap.ruleclass import * + +vcspackages = {'-git': 'git', '-svn': 'subversion', '-bzr': 'bzr', '-hg': 'mercurial' } + +class ConflictsRule(PkgbuildRule): + name = "conflictsrule" + description = "Verifies if a pkgname-vcs package conflicts with pkgname" + def analyze(self, pkginfo, tar): + if 'name' in pkginfo: + if any(pkginfo["name"].endswith(vcs) for vcs in vcspackages) and not "conflicts" in pkginfo: + self.warnings.append(("vcs-package-conflicts", ())) + +class MakedependsRule(PkgbuildRule): + name = "makedependsrule" + description = "Checks if a vcs package has the correct makedepends array" + def analyze(self, pkginfo, tar): + if 'name' in pkginfo: + for vcsname, vcspkg in vcspackages.items(): + if not pkginfo['name'].endswith(vcsname): + continue + if 'makedepends' not in pkginfo or vcspkg not in pkginfo['makedepends']: + self.errors.append(("vcs-package-makedepends-missing %s", vcspkg)) + +# vim: set ts=4 sw=4 noet: diff --git a/namcap-tags b/namcap-tags index 818c7a5..ecde1c0 100644 --- a/namcap-tags +++ b/namcap-tags @@ -77,6 +77,9 @@ use-pkgdir :: Use $pkgdir instead of $startdir/pkg use-srcdir :: Use $srcdir instead of $startdir/src using-dl-sourceforge :: Attempting to use dl sourceforge domain, use downloads.sourceforge.net instead variable-not-array %s :: Variable %s is not an array. +vcs-package-conflicts :: Vcs package should conflict with the non-vcs version +vcs-package-makedepends-missing %s :: Makedepends array should contain '%s' + # dependency tags dependency-already-satisfied %s :: Dependency %s included but already satisfied -- 1.8.4

2 2

[arch-projects] [namcap][PATCH] implement FS#27485, warn on unstripped files
by Jelle van der Waa 04 Nov '13

04 Nov '13

--- Namcap/rules/elffiles.py | 37 +++++++++++++++++++++++++++++++++++++ namcap-tags | 1 + 2 files changed, 38 insertions(+) diff --git a/Namcap/rules/elffiles.py b/Namcap/rules/elffiles.py index f8f16ac..20d117f 100644 --- a/Namcap/rules/elffiles.py +++ b/Namcap/rules/elffiles.py @@ -23,6 +23,7 @@ import tempfile import subprocess from elftools.elf.elffile import ELFFile +from elftools.elf.sections import SymbolTableSection from Namcap.util import is_elf, clean_filename from Namcap.ruleclass import * @@ -143,4 +144,40 @@ class ELFExecStackRule(TarballRule): self.warnings = [("elffile-with-execstack %s", i) for i in exec_stacks] +class ELFUnstrippedRule(TarballRule): + """ + Checks for unstripped ELF files. Uses pyelftools to check if + .symtab exists. + """ + + name = "elfunstripped" + description = "Check for unstripped ELF files." + + def analyze(self, pkginfo, tar): + unstripped_binaries = [] + + for entry in tar: + tmpname = _test_elf_and_extract(tar, entry) + if not tmpname: + continue + + try: + fp = open(tmpname, 'rb') + elffile = ELFFile(fp) + for section in elffile.iter_sections(): + if not isinstance(section, SymbolTableSection): + continue + + if section['sh_entsize'] == 0: + print ('symbol table empty') + continue + + if section.name == b'.symtab': + unstripped_binaries.append(entry.name) + finally: + os.unlink(tmpname) + if unstripped_binaries: + self.warnings = [("elffile-unstripped %s", i) + for i in unstripped_binaries] + # vim: set ts=4 sw=4 noet: diff --git a/namcap-tags b/namcap-tags index 818c7a5..1b681a6 100644 --- a/namcap-tags +++ b/namcap-tags @@ -20,6 +20,7 @@ elffile-in-any-package %s :: ELF file ('%s') found in an 'any' package. elffile-not-in-allowed-dirs %s :: ELF file ('%s') outside of a valid path. elffile-with-textrel %s :: ELF file ('%s') has text relocations. elffile-with-execstack %s :: ELF file ('%s') has executable stack. +elffile-unstripped %s :: ELF file ('%s') is unstripped. empty-directory %s :: Directory (%s) is empty error-running-rule %s :: Error running rule '%s' extra-var-begins-without-underscore %s :: Non standard variable '%s' doesn't start with an underscore -- 1.8.4.2

1 2

[arch-projects] [namcap][PATCH] check if the description is set in a PKGBUILD
by Jelle van der Waa 02 Nov '13

02 Nov '13

--- Namcap/rules/missingvars.py | 7 +++++++ namcap-tags | 1 + 2 files changed, 8 insertions(+) diff --git a/Namcap/rules/missingvars.py b/Namcap/rules/missingvars.py index 90146f3..440f883 100644 --- a/Namcap/rules/missingvars.py +++ b/Namcap/rules/missingvars.py @@ -76,4 +76,11 @@ class TagsRule(PkgbuildRule): if maintainertag != 1: self.warnings.append(("missing-maintainer", ())) +class DescriptionRule(PkgbuildRule): + name = "description" + description = "Verifies that the description is set in a PKGBUILD" + def analyze(self, pkginfo, tar): + if "desc" not in pkginfo or len(pkginfo["desc"]) == 0: + self.errors.append(("missing-description", ())) + # vim: set ts=4 sw=4 noet: diff --git a/namcap-tags b/namcap-tags index 818c7a5..d638478 100644 --- a/namcap-tags +++ b/namcap-tags @@ -47,6 +47,7 @@ link-level-dependence %s in %s :: Link-level dependence (%s) in file %s lots-of-docs %f :: Package was %.0f%% docs by size; maybe you should split out a docs package mime-cache-not-updated :: Mime-file found. Add "update-mime-database usr/share/mime" to the install file missing-backup-file %s :: File in backup array (%s) not found in package +missing-description :: Missing description in PKGBUILD missing-contributor :: Missing Contributor tag missing-custom-license-dir usr/share/licenses/%s :: Missing custom license directory (usr/share/licenses/%s) missing-custom-license-file usr/share/licenses/%s/* :: Missing custom license file in package (usr/share/licenses/%s/*) -- 1.8.4

2 1

[arch-projects] [ABS] [PATCH] Merge bzr, git, hg and svn into a generic proto
by Maxime Gauduin 01 Nov '13

01 Nov '13

Having separate prototypes for each VCS type is no longer relevant since Pacman 4.1. Having a generic prototype for regular, bzr, git hg and svn packages makes more sense. Left cvs, and darcs protos untouched as they are not yet supported in Pacman. Signed-off-by: Maxime Gauduin <alucryd(a)gmail.com> --- prototypes/PKGBUILD-bzr.proto | 64 ------------------------- prototypes/PKGBUILD-git.proto | 64 ------------------------- prototypes/PKGBUILD-hg.proto | 65 ------------------------- prototypes/PKGBUILD-svn.proto | 63 ------------------------ prototypes/PKGBUILD.proto | 108 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 108 insertions(+), 256 deletions(-) delete mode 100644 prototypes/PKGBUILD-bzr.proto delete mode 100644 prototypes/PKGBUILD-git.proto delete mode 100644 prototypes/PKGBUILD-hg.proto delete mode 100644 prototypes/PKGBUILD-svn.proto create mode 100644 prototypes/PKGBUILD.proto diff --git a/prototypes/PKGBUILD-bzr.proto b/prototypes/PKGBUILD-bzr.proto deleted file mode 100644 index 81f145f..0000000 --- a/prototypes/PKGBUILD-bzr.proto +++ /dev/null @@ -1,64 +0,0 @@ -# This is an example PKGBUILD file. Use this as a start to creating your own, -# and remove these comments. For more information, see 'man PKGBUILD'. -# NOTE: Please fill out the license field for your package! If it is unknown, -# then please put 'unknown'. - -# See http://wiki.archlinux.org/index.php/VCS_PKGBUILD_Guidelines -# for more information on packaging from Bazaar sources. - -# Maintainer: Your Name <youremail(a)domain.com> -pkgname=NAME-bzr -pkgver=VERSION -pkgrel=1 -pkgdesc="" -arch=() -url="" -license=('GPL') -groups=() -depends=() -makedepends=('bzr') -provides=() -conflicts=() -replaces=() -backup=() -options=() -install= -source=() -noextract=() -md5sums=() #generate with 'makepkg -g' - -_bzrtrunk=BZRURL -_bzrmod=MODNAME - -build() { - cd "$srcdir" - msg "Connecting to Bazaar server...." - - if [[ -d "$_bzrmod" ]]; then - cd "$_bzrmod" && bzr --no-plugins pull "$_bzrtrunk" -r "$pkgver" - msg "The local files are updated." - else - bzr --no-plugins branch "$_bzrtrunk" "$_bzrmod" -q -r "$pkgver" - fi - - msg "Bazaar checkout done or server timeout" - msg "Starting build..." - - rm -rf "$srcdir/$_bzrmod-build" - cp -r "$srcdir/$_bzrmod" "$srcdir/$_bzrmod-build" - cd "$srcdir/$_bzrmod-build" - - # - # BUILD HERE - # - ./autogen.sh - ./configure --prefix=/usr - make -} - -package() { - cd "$srcdir/$_bzrmod-build" - make DESTDIR="$pkgdir/" install -} - -# vim:set ts=2 sw=2 et: diff --git a/prototypes/PKGBUILD-git.proto b/prototypes/PKGBUILD-git.proto deleted file mode 100644 index 05b721b..0000000 --- a/prototypes/PKGBUILD-git.proto +++ /dev/null @@ -1,64 +0,0 @@ -# This is an example PKGBUILD file. Use this as a start to creating your own, -# and remove these comments. For more information, see 'man PKGBUILD'. -# NOTE: Please fill out the license field for your package! If it is unknown, -# then please put 'unknown'. - -# See http://wiki.archlinux.org/index.php/VCS_PKGBUILD_Guidelines -# for more information on packaging from GIT sources. - -# Maintainer: Your Name <youremail(a)domain.com> -pkgname=NAME-git -pkgver=VERSION -pkgrel=1 -pkgdesc="" -arch=() -url="" -license=('GPL') -groups=() -depends=() -makedepends=('git') -provides=() -conflicts=() -replaces=() -backup=() -options=() -install= -source=() -noextract=() -md5sums=() #generate with 'makepkg -g' - -_gitroot=GITURL -_gitname=MODENAME - -build() { - cd "$srcdir" - msg "Connecting to GIT server...." - - if [[ -d "$_gitname" ]]; then - cd "$_gitname" && git pull origin - msg "The local files are updated." - else - git clone "$_gitroot" "$_gitname" - fi - - msg "GIT checkout done or server timeout" - msg "Starting build..." - - rm -rf "$srcdir/$_gitname-build" - git clone "$srcdir/$_gitname" "$srcdir/$_gitname-build" - cd "$srcdir/$_gitname-build" - - # - # BUILD HERE - # - ./autogen.sh - ./configure --prefix=/usr - make -} - -package() { - cd "$srcdir/$_gitname-build" - make DESTDIR="$pkgdir/" install -} - -# vim:set ts=2 sw=2 et: diff --git a/prototypes/PKGBUILD-hg.proto b/prototypes/PKGBUILD-hg.proto deleted file mode 100644 index 8474533..0000000 --- a/prototypes/PKGBUILD-hg.proto +++ /dev/null @@ -1,65 +0,0 @@ -# This is an example PKGBUILD file. Use this as a start to creating your own, -# and remove these comments. For more information, see 'man PKGBUILD'. -# NOTE: Please fill out the license field for your package! If it is unknown, -# then please put 'unknown'. - -# See http://wiki.archlinux.org/index.php/VCS_PKGBUILD_Guidelines -# for more information on packaging from Mercurial(hg) sources. - -# Maintainer: Your Name <youremail(a)domain.com> -pkgname=NAME-hg -pkgver=VERSION -pkgrel=1 -pkgdesc="" -arch=() -url="" -license=('GPL') -groups=() -depends=() -makedepends=('mercurial') -provides=() -conflicts=() -replaces=() -backup=() -options=() -install= -source=() -noextract=() -md5sums=() #generate with 'makepkg -g' - -_hgroot=HGURL -_hgrepo=REPONAME - -build() { - cd "$srcdir" - msg "Connecting to Mercurial server...." - - if [[ -d "$_hgrepo" ]]; then - cd "$_hgrepo" - hg pull -u - msg "The local files are updated." - else - hg clone "$_hgroot" "$_hgrepo" - fi - - msg "Mercurial checkout done or server timeout" - msg "Starting build..." - - rm -rf "$srcdir/$_hgrepo-build" - cp -r "$srcdir/$_hgrepo" "$srcdir/$_hgrepo-build" - cd "$srcdir/$_hgrepo-build" - - # - # BUILD HERE - # - ./autogen.sh - ./configure --prefix=/usr - make -} - -package() { - cd "$srcdir/$_hgrepo-build" - make DESTDIR="$pkgdir/" install -} - -# vim:set ts=2 sw=2 et: diff --git a/prototypes/PKGBUILD-svn.proto b/prototypes/PKGBUILD-svn.proto deleted file mode 100644 index aff5ca9..0000000 --- a/prototypes/PKGBUILD-svn.proto +++ /dev/null @@ -1,63 +0,0 @@ -# This is an example PKGBUILD file. Use this as a start to creating your own, -# and remove these comments. For more information, see 'man PKGBUILD'. -# NOTE: Please fill out the license field for your package! If it is unknown, -# then please put 'unknown'. - -# See http://wiki.archlinux.org/index.php/VCS_PKGBUILD_Guidelines -# for more information on packaging from SVN sources. - -# Maintainer: Your Name <youremail(a)domain.com> -pkgname=NAME-svn -pkgver=VERSION -pkgrel=1 -pkgdesc="" -arch=() -url="" -license=('GPL') -groups=() -depends=() -makedepends=('subversion') -provides=() -conflicts=() -replaces=() -backup=() -options=() -install= -source=() -noextract=() -md5sums=() #generate with 'makepkg -g' - -_svntrunk=SVNURL -_svnmod=MODNAME - -build() { - cd "$srcdir" - msg "Connecting to SVN server...." - - if [[ -d "$_svnmod/.svn" ]]; then - (cd "$_svnmod" && svn up -r "$pkgver") - else - svn co "$_svntrunk" --config-dir ./ -r "$pkgver" "$_svnmod" - fi - - msg "SVN checkout done or server timeout" - msg "Starting build..." - - rm -rf "$srcdir/$_svnmod-build" - svn export "$srcdir/$_svnmod" "$srcdir/$_svnmod-build" - cd "$srcdir/$_svnmod-build" - - # - # BUILD HERE - # - ./autogen.sh - ./configure --prefix=/usr - make -} - -package() { - cd "$srcdir/$_svnmod-build" - make DESTDIR="$pkgdir/" install -} - -# vim:set ts=2 sw=2 et: diff --git a/prototypes/PKGBUILD.proto b/prototypes/PKGBUILD.proto new file mode 100644 index 0000000..5ad5699 --- /dev/null +++ b/prototypes/PKGBUILD.proto @@ -0,0 +1,108 @@ +# This is an example PKGBUILD file. Use this as a start to creating your own, +# and remove these comments. For more information, see 'man PKGBUILD'. +# NOTE: Please fill out the license field for your package! If it is unknown, +# then please put 'unknown'. + +# Maintainer: Your Name <youremail(a)domain.com> +pkgname=NAME +pkgver=VERSION +pkgrel=1 +pkgdesc="" +arch=() +url="" +license=('GPL') +groups=() +depends=() +makedepends=() +provides=() +conflicts=() +replaces=() +backup=() +options=() +install= +source=('SRC_NAME::SRC_URL') + +# SRC_NAME: Use to change the source name if needed +# Example: +# source=("$pkgname-$pkgver.tar.gz::http://www.foobar.com/foobar.tar.gz") + +noextract=() +md5sums=() # Generate with 'makepkg -g' + +################################################################################ +################################# VCS specific ################################# +################################################################################ + +# The following guidelines are specific to BZR, GIT, HG and SVN packages. +# CVS and DARCS are not natively supported in pacman yet, please refer to the +# dedicated prototypes instead. +# See http://wiki.archlinux.org/index.php/VCS_PKGBUILD_Guidelines for more +# information on packaging from VCS sources. + +pkgname=NAME-VCS # '-bzr', '-git', '-hg' or '-svn' +makedepends=('VCS_PACKAGE') # 'bzr', 'git', 'mercurial' or 'subversion' +provides=("${pkgname%-VCS}") +conflicts=("${pkgname%-VCS}") +source=('DIR_NAME::VCS+REPO_URL#FRAGMENT') +md5sums=('SKIP') + +# DIR_NAME: Use to change the source directory name if needed + +# VCS: Use to specify the VCS type, not needed when REPO_URL is explicit (for +# example git://URL, svn://URL or lp:NAME) + +# FRAGMENT: Use to pull a specific branch, commit/revision or tag +# Bazaar accepts the 'revision' keyword +# Git accepts the 'branch', 'commit' and 'tag' keywords +# Mercurial accepts the 'branch', 'revision' and 'tag' keywords +# Subversion accepts the 'revision' keyword + +# Examples: +# source=("lp:${pkgname%-bzr}#revision=42") +# source=("git+https://github.com/author/${pkgname%-git}.git#branch=unstable") +# source=('hg+https://bitbucket.org/author/project#tag=2.0') +# source=("${pkgname%-svn}::svn://svn.code.sf.net/p/project/code/trunk"} + +pkgver() { + cd "$srcdir" + +# Bazaar + printf "%s" "$(bzr revno)" + +# Git, tags available + printf "%s" "$(git describe --long | sed 's/-/./g')" + +# Git, no tags available + printf "%s.%s" "$(git rev-list --count HEAD)" "$(git rev-parse --short HEAD)" + +# Mercurial + printf "%s.%s" "$(hg identify -n)" "$(hg identify -i)" + +# Subversion + printf "%s" "$(svnversion | tr -d 'A-z')" + +# Fallback + printf "%s" "$(date +%Y%m%d)" +} + +################################################################################ + +prepare() { + cd "$srcdir" + patch -Np1 ../foo.patch + patch -Np0 ../bar.patch +} + +build() { + cd "$srcdir" + ./autogen.sh + ./configure --prefix=/usr + make +} + +package() { + cd "$srcdir" + make DESTDIR="$pkgdir/" install +} + +# vim:set ts=2 sw=2 et: -- 1.8.4

3 5

[arch-projects] [devtools][PATCH] checkpkg: Only match .so at end of filenames for soname check
by Eric Bélanger 29 Oct '13

29 Oct '13

Signed-off-by: Eric Bélanger <snowmaniscool(a)gmail.com> --- checkpkg.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/checkpkg.in b/checkpkg.in index 4d2a905..4a46df3 100644 --- a/checkpkg.in +++ b/checkpkg.in @@ -74,7 +74,7 @@ for _pkgname in "${pkgname[@]}"; do if diff "$TEMPDIR/filelist-$_pkgname"{-old,} | grep '\.so' &>/dev/null; then mkdir -p "$TEMPDIR/pkg" bsdtar -x -C "$TEMPDIR" -f "$pkgfile" #> /dev/null - diff "$TEMPDIR/filelist-$_pkgname-old" "$TEMPDIR/filelist-$_pkgname" | awk '/>.*\.so/{$1 = ""; print $0}' | while read i; do + comm -13 <(sort "$TEMPDIR/filelist-$_pkgname-old") <(sort "$TEMPDIR/filelist-$_pkgname") | grep .so$ | while read i; do echo "${i}: " "$(objdump -p "$TEMPDIR/$i" | grep SONAME)" done else -- 1.8.4.1

1 0

[arch-projects] [netctl][PATCH] Set-up authentication settings for mobile_ppp
by Normal Ra 28 Oct '13

28 Oct '13

Unfortunately, my ISP only accepts PAP authentication and as a result of PPPD's natural behaviour, I am rendered unable to connect with my USB 3G modem onto the network. This patch is supposed to introduce a new configuration option for the 'mobile_ppp' connection type: Auth= It is an array of authentication methods, those prefaced with '!' will become 'refuse-opt', and otherwise will become 'require', in the resulting 'options' file. Something I've patched up that works, cheers! --- diff --git a/docs/examples/mobile_ppp b/docs/examples/mobile_ppp index f3b0b8a..02be7a4 100644 --- a/docs/examples/mobile_ppp +++ b/docs/examples/mobile_ppp @@ -10,6 +10,9 @@ Connection=mobile_ppp # Use DNS provided by the peer (default: true) #UsePeerDNS=true +# Force authentication method +#Auth=('pap') + # The user and password are not always required #User='example(a)yourprovider.com' #Password='very secret' diff --git a/docs/netctl.profile.5.txt b/docs/netctl.profile.5.txt index b1ccde1..5b05ec7 100644 --- a/docs/netctl.profile.5.txt +++ b/docs/netctl.profile.5.txt @@ -361,6 +361,12 @@ type: 'UsePeerDNS=':: Use the DNS provided by the peer (defaults to `true') +'Auth=':: + Define disallowed and allowed authentication methods. + Those prefaced with ! will be refused, and specified will be + required. E.g. `Auth=('!chap' 'eap')' will refuse CHAP, but require + EAP. + 'User=' and 'Password=':: The username and password to connect with. These are unset by default, as they are often not required. diff --git a/src/lib/connections/mobile_ppp b/src/lib/connections/mobile_ppp index b966390..daac9e5 100644 --- a/src/lib/connections/mobile_ppp +++ b/src/lib/connections/mobile_ppp @@ -13,6 +13,10 @@ quote_word() { mobile_ppp_up() { local cfg local chat + local auth_require=('chap' 'mppe' 'mppe-40' 'mppe-128' 'mschap' \ + 'mschap-v2' 'eap' 'pap') + local auth_refuse=('chap' 'mschap' 'mschap-v2' 'eap' 'pap') + mkdir -p "$STATE_DIR/mobile_ppp.${Interface}.${Profile}/" chmod 700 "$STATE_DIR/mobile_ppp.${Interface}.${Profile}/" @@ -48,6 +52,21 @@ EOF echo "usepeerdns" >> "${cfg}" fi + # Generate authentication settings + for opt in ${Auth[@]}; do + for authmeth in ${auth_require[@]}; do + if [[ $opt = "$authmeth" ]]; then + echo "require-$authmeth" >> "${cfg}" + fi + done + + for authmeth in ${auth_refuse[@]}; do + if [[ $opt = "!$authmeth" ]]; then + echo "refuse-$authmeth" >> "${cfg}" + fi + done + done + # Writes username and password echo "noauth" >> "${cfg}" echo "hide-password" >> ${cfg} --

2 2

[arch-projects] [devtools] [GIT] The official devtools repository branch master updated. 20131020-2-g7524bec
by pierre＠archlinux.org 27 Oct '13

27 Oct '13

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The official devtools repository". The branch, master has been updated via 7524bec6d930992876611f6c901852d8ae0d7ab0 (commit) via 70309118ab1d082bf12dfd39c3068f5fdd6662dc (commit) from 164f5b758d56ce36ac8b087c1d55b8719555711f (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 7524bec6d930992876611f6c901852d8ae0d7ab0 Author: Eric Bélanger <snowmaniscool(a)gmail.com> Date: Wed Oct 23 23:24:45 2013 -0400 checkpkg: Fix soname check The bsdtar options were in the incorrect order and objdump couldn't find the files. Signed-off-by: Eric Bélanger <snowmaniscool(a)gmail.com> Signed-off-by: Pierre Schmitz <pierre(a)archlinux.de> commit 70309118ab1d082bf12dfd39c3068f5fdd6662dc Author: Eric Bélanger <snowmaniscool(a)gmail.com> Date: Wed Oct 23 23:34:12 2013 -0400 checkpkg: Create symlinks to old packages in $TEMPDIR instead of $PWD Signed-off-by: Eric Bélanger <snowmaniscool(a)gmail.com> Signed-off-by: Pierre Schmitz <pierre(a)archlinux.de> ----------------------------------------------------------------------- Summary of changes: checkpkg.in | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) hooks/post-receive -- The official devtools repository

1 0

[arch-projects] [netctl] [GIT] Network control utility based on systemd branch master updated. 1.3-10-gde41bbd
by jouke＠archlinux.org 27 Oct '13

27 Oct '13

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Network control utility based on systemd". The branch, master has been updated via de41bbd471cbac5ef1a9da20fe990a5bd7d4b271 (commit) via 120d94020aed8d8b5e1b76dc7ee03fa062fab26c (commit) via 2f1ef4d9f87af7112c6bbb7c53bbe7bafe3ef8b1 (commit) via 7c4329462e411c110b8dded92cc4b0d935e1e95d (commit) via 8a414978b39e784fdabf6895985acc0e054d235c (commit) via 755c8d5afdaca08ca1732765f30370f752259d4b (commit) via ab8953024be9f6f7d5f98886894917a8a8fdd452 (commit) via 5930a6eebc67b9665ea5d6133306a71030cd94a0 (commit) via f50656d00cac5125b0fd8ae7dbfa314b83597ad4 (commit) via 0c85a0d981c403a438e671af510a733a319b1b97 (commit) from 127976c75b294865571c3367f3d8e2e25262f2e7 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit de41bbd471cbac5ef1a9da20fe990a5bd7d4b271 Author: Jouke Witteveen <j.witteveen(a)gmail.com> Date: Sat Oct 26 10:45:17 2013 +0200 wifi-menu: ask for a name for the new profile Some abuse of the stack, but that should be no problem: the user has to enter around 10000 existing profile names which (s)he does not want to overwrite before a stack overflow occurs. Feature suggested by: Paul Bienkowski <opatutlol(a)aol.com> commit 120d94020aed8d8b5e1b76dc7ee03fa062fab26c Author: Jouke Witteveen <j.witteveen(a)gmail.com> Date: Wed Oct 23 13:31:38 2013 +0200 Overhaul of ppp connection types - Refactorization of option file generation - Introduction of optional additional pppd options file specification - Introduction of unit specification option for pppoe connections commit 2f1ef4d9f87af7112c6bbb7c53bbe7bafe3ef8b1 Author: Jouke Witteveen <j.witteveen(a)gmail.com> Date: Wed Oct 23 01:20:54 2013 +0200 beautify error output Also: tag error messages as systemd error messages when the messages are not directed to the terminal. commit 7c4329462e411c110b8dded92cc4b0d935e1e95d Author: Jouke Witteveen <j.witteveen(a)gmail.com> Date: Wed Oct 23 01:12:48 2013 +0200 Add a connection type for dummy interfaces commit 8a414978b39e784fdabf6895985acc0e054d235c Author: Jouke Witteveen <j.witteveen(a)gmail.com> Date: Mon Oct 21 23:58:11 2013 +0200 Set a global restrictive umask Netctl files can potentially contain passwords or execute code as root. commit 755c8d5afdaca08ca1732765f30370f752259d4b Author: Jouke Witteveen <j.witteveen(a)gmail.com> Date: Mon Oct 21 23:37:20 2013 +0200 Minor rfkill refactorization Testing whether transmission is blocked at all is now possible through [[ -n $(rf_status "$Interface" "$RFKill") ]] commit ab8953024be9f6f7d5f98886894917a8a8fdd452 Author: Jouke Witteveen <j.witteveen(a)gmail.com> Date: Mon Oct 21 17:10:23 2013 +0200 Allow limiting the frequencies to scan (FS#37032) This is especially useful to enforce connecting in the 5 GHz band. commit 5930a6eebc67b9665ea5d6133306a71030cd94a0 Author: Jouke Witteveen <j.witteveen(a)gmail.com> Date: Mon Oct 21 16:51:00 2013 +0200 Increase default DHCP timeout New timeout is 30 seconds, which equals the current dhcpcd default. commit f50656d00cac5125b0fd8ae7dbfa314b83597ad4 Author: Jouke Witteveen <j.witteveen(a)gmail.com> Date: Mon Oct 21 16:47:21 2013 +0200 Better detection of hex keys Hex WEP keys are of even length, ASCII keys are of odd length. Using this information we make wifi-menu work better for WEP networks. commit 0c85a0d981c403a438e671af510a733a319b1b97 Author: Jouke Witteveen <j.witteveen(a)gmail.com> Date: Mon Oct 21 15:11:39 2013 +0200 Specify the local side of a tunnel early (FS#36711) Needed in case the remote side of a tunnel is set to 'any'. ----------------------------------------------------------------------- Summary of changes: docs/examples/mobile_ppp | 3 - docs/netctl.profile.5.txt | 25 ++++++- src/lib/connections/README | 3 + src/lib/connections/{tunnel => dummy} | 14 ++-- src/lib/connections/mobile_ppp | 118 +++++++++++----------------------- src/lib/connections/pppoe | 90 +++++++++++++------------- src/lib/connections/tunnel | 7 +- src/lib/connections/tuntap | 7 +- src/lib/connections/wireless | 4 +- src/lib/globals | 11 +++- src/lib/ip | 6 +- src/lib/rfkill | 37 +++++++---- src/lib/wpa | 10 ++- src/netctl-auto | 4 +- src/wifi-menu | 16 +++++ 15 files changed, 179 insertions(+), 176 deletions(-) copy src/lib/connections/{tunnel => dummy} (52%) hooks/post-receive -- Network control utility based on systemd

1 0