June 2012 - Arch-projects - lists.archlinux.org

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository branch master updated. 2012.06.2-4-g32a67cd
by tomegun＠archlinux.org 23 Jun '12

23 Jun '12

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The branch, master has been updated via 32a67cdc01639a2080c93f2a0d71859f196b6c7d (commit) via 0a6787be2a197b4f23302e7d0a3db4ff189578ae (commit) via 911439c4411be3ba0bab41b8f11ce0598b0cae9d (commit) via dad9b760821b8699da8efffb230c3bf564392a38 (commit) from 9b3b01214d575f2cb9dc2009ddd203cb8ae54f35 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 32a67cdc01639a2080c93f2a0d71859f196b6c7d Author: Allan McRae <allan(a)archlinux.org> Date: Wed Jun 13 03:47:31 2012 +0000 Remove trailing colon from output Signed-off-by: Allan McRae <allan(a)archlinux.org> [tomegun: do the same for startup too] Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit 0a6787be2a197b4f23302e7d0a3db4ff189578ae Author: Sébastien Luttringer <seblu(a)seblu.net> Date: Mon Jun 11 23:33:30 2012 +0200 rc.conf.5: fix daemon prefixes list Removing this line produce a bad formating in man page Signed-off-by: Sébastien Luttringer <seblu(a)seblu.net> commit 911439c4411be3ba0bab41b8f11ce0598b0cae9d Author: Sébastien Luttringer <seblu(a)seblu.net> Date: Sun Jun 10 03:46:34 2012 +0200 Remove ck_depends ck_depends is no more used and should not be used anymore Signed-off-by: Sébastien Luttringer <seblu(a)seblu.net> commit dad9b760821b8699da8efffb230c3bf564392a38 Author: Sébastien Luttringer <seblu(a)seblu.net> Date: Mon Jun 11 23:06:39 2012 +0200 rc.d: remove bad examples rc.d must have explicit daemon name with command other than list Signed-off-by: Sébastien Luttringer <seblu(a)seblu.net> ----------------------------------------------------------------------- Summary of changes: functions | 9 --------- rc.conf.5.txt | 1 + rc.d | 1 - rc.d.8.txt | 6 ------ rc.shutdown | 2 +- rc.sysinit | 2 +- 6 files changed, 3 insertions(+), 18 deletions(-) hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] [initscripts] [PATCH 1/2] Correct spelling and grammar in comments, messages, and man pages
by jstjohn＠purdue.edu 23 Jun '12

23 Jun '12

From: "Jason St. John" <jstjohn(a)purdue.edu> This commit improves/corrects the spelling and grammar in script comments, messages that get printed to the terminal (stat_busy, etc.), and in two man pages. Some of the notable changes are listed below: -- 'UDev' -> 'udev' -- 'filesystems' -> 'file systems' -- 'BTRFS' -> 'Btrfs' -- 'api' -> 'API' -- 'timezone' -> 'time zone' -- 'http://' -> 'https://' (in the archlinux.org URL) -- 'bash' -> 'Bash' (although obviously not in the shebang) -- 'startup' -> 'start-up' -- changed messages printed to the terminal to use sentence case exclusively --- PKGBUILD | 3 +-- bash-completion | 2 +- functions | 46 +++++++++++++++++++++++----------------------- netfs | 6 +++--- network | 8 ++++---- rc.conf.5.txt | 44 ++++++++++++++++++++++---------------------- rc.d.8.txt | 6 +++--- rc.local | 2 +- rc.shutdown | 26 +++++++++++++------------- rc.single | 4 ++-- rc.sysinit | 50 +++++++++++++++++++++++++------------------------- 11 files changed, 98 insertions(+), 99 deletions(-) diff --git a/PKGBUILD b/PKGBUILD index 0c63e59..7a45797 100644 --- a/PKGBUILD +++ b/PKGBUILD @@ -3,7 +3,7 @@ pkgver=$(date +%Y%m%d) pkgrel=$(git log -1 --pretty=format:%h) pkgdesc="System initialization/bootup scripts" arch=('any') -url="http://www.archlinux.org" +url="https://www.archlinux.org" license=('GPL') groups=('base') conflicts=('initscripts') @@ -16,7 +16,6 @@ optdepends=('net-tools: legacy networking support' 'bridge-utils: Network bridging support' 'dhcpcd: DHCP network configuration' 'wireless_tools: Wireless networking') -makedepends=(asciidoc) source=() sha256sums=() diff --git a/bash-completion b/bash-completion index 4b4593b..333e339 100644 --- a/bash-completion +++ b/bash-completion @@ -1,4 +1,4 @@ -# rc.d bash completion by Seblu <seblu(a)seblu.net> +# rc.d Bash completion by Seblu <seblu(a)seblu.net> _rc_d() { diff --git a/functions b/functions index 4a8ba7b..daf8d83 100644 --- a/functions +++ b/functions @@ -2,7 +2,7 @@ # initscripts functions # -# sanitize PATH (will be overridden later when /etc/profile is sourced, but is useful for UDev) +# sanitize PATH (will be overridden later when /etc/profile is sourced but is useful for udev) export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" localevars=(LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY @@ -13,7 +13,7 @@ vconsolevars=(KEYMAP KEYMAP_TOGGLE FONT FONT_MAP FONT_UNIMAP) if [[ $1 == "start" ]]; then if [[ $STARTING ]]; then - echo "A daemon is starting another daemon, this is unlikely to work as intended." + echo "A daemon is starting another daemon; this is unlikely to work as intended." else export STARTING=1 fi @@ -334,13 +334,13 @@ kill_all_wait() { } kill_all() { - stat_busy "Sending SIGTERM To Processes" + stat_busy "Sending SIGTERM to processes" kill_all_wait 15 40 if (( $? == 0 )); then stat_done else stat_fail - status "Sending SIGKILL To Processes" kill_all_wait 9 60 + status "Sending SIGKILL to processes" kill_all_wait 9 60 fi } @@ -358,23 +358,23 @@ load_modules() { return $rc } -# Start/trigger UDev, load MODULES and settle UDev +# Start/trigger udev, load MODULES and settle udev udevd_modprobe() { # $1 = where we are being called from. # This is used to determine which hooks to run. - status "Starting UDev Daemon" /usr/lib/systemd/systemd-udevd --daemon + status "Starting udev daemon" /usr/lib/systemd/systemd-udevd --daemon run_hook "$1_udevlaunched" - stat_busy "Triggering UDev uevents" + stat_busy "Triggering udev uevents" udevadm trigger --action=add --type=subsystems udevadm trigger --action=add --type=devices stat_done # Load modules from the MODULES array and modules-load.d - status -v "Loading User-specified Modules" load_modules + status -v "Loading user-specified modules" load_modules - status "Waiting for UDev uevents to be processed" \ + status "Waiting for udev uevents to be processed" \ udevadm settle run_hook "$1_udevsettled" @@ -484,13 +484,13 @@ read_crypttab() { return $failed } -set_timezone() { +set_time_zone() { local tz=$1 zonefile=/usr/share/zoneinfo/$1 [[ $tz ]] || return 1 if [[ ! -e $zonefile ]]; then - printf "error: \`%s' is not a valid timezone\n" "$tz" + printf "error: \`%s' is not a valid time zone\n" "$tz" return 1 fi @@ -501,11 +501,11 @@ set_timezone() { fi } -# Filesystem functions +# File system functions # These can be overridden/reused for customizations like shutdown/loop-fsck. NETFS="nfs,nfs4,smbfs,cifs,codafs,ncpfs,shfs,fuse,fuseblk,glusterfs,davfs,fuse.glusterfs" -# Check local filesystems +# Check local file systems fsck_all() { if [[ -f /forcefsck ]] || in_array forcefsck $(< /proc/cmdline); then FORCEFSCK="-f" @@ -534,12 +534,12 @@ fsck_reboot() { sleep 15 else echo - echo "***************** FILESYSTEM CHECK FAILED ****************" + echo "**************** FILE SYSTEM CHECK FAILED ****************" echo "* *" echo "* Please repair manually and reboot. Note that the root *" echo "* file system is currently mounted read-only. To remount *" - echo "* it read-write type: mount -o remount,rw / *" - echo "* When you exit the maintenance shell the system will *" + echo "* it read-write, type: mount -o remount,rw / *" + echo "* When you exit the maintenance shell, the system will *" echo "* reboot automatically. *" echo "* *" echo "************************************************************" @@ -562,12 +562,12 @@ umount_all() { findmnt -mrunRo TARGET,FSTYPE,OPTIONS / | { while read -r target fstype options; do - # match only targetted fstypes + # match only targeted fstypes if [[ $1 && $1 != "$fstype" ]]; then continue fi - # don't unmount API filesystems + # do not unmount API file systems if [[ $target = /@(proc|sys|run|dev|dev/pts) ]]; then continue fi @@ -589,7 +589,7 @@ umount_all() { } remove_leftover() { - status -v 'Removing Leftover Files' systemd-tmpfiles --create --remove + status -v 'Removing leftover files' systemd-tmpfiles --create --remove } bootlogd_stop() { @@ -626,14 +626,14 @@ bootlogd_stop() { # single_udevlaunched: after udev has been launched in rc.single # sysinit_udevsettled: after uevents have settled in rc.sysinit # single_udevsettled: after uevents have settled in rc.single -# sysinit_premount: before local filesystems are mounted, but after root is mounted read-write in rc.sysinit -# sysinit_postmount: after local filesystems are mounted +# sysinit_premount: before local file systems are mounted, but after root is mounted read-write in rc.sysinit +# sysinit_postmount: after local file systems are mounted # shutdown_prekillall: before all processes are being killed in rc.shutdown # single_prekillall: before all processes are being killed in rc.single # shutdown_postkillall: after all processes have been killed in rc.shutdown # single_postkillall: after all processes have been killed in rc.single -# shutdown_preumount: after last filesystem write, but before filesystems are unmounted -# shutdown_postumount: after filesystems are unmounted +# shutdown_preumount: after last file system write, but before file systems are unmounted +# shutdown_postumount: after file systems are unmounted # shutdown_poweroff: directly before powering off in rc.shutdown # # Declare add_hook and run_hook as read-only to prevent overwriting them. diff --git a/netfs b/netfs index bd459ef..a3b9ab9 100755 --- a/netfs +++ b/netfs @@ -1,12 +1,12 @@ #!/bin/bash -# sourcing our current rc.conf requires this to be a bash script +# sourcing our current rc.conf requires this to be a Bash script . /etc/rc.conf . /etc/rc.d/functions case "$1" in start) - stat_busy "Mounting Network Filesystems" + stat_busy "Mounting network file systems" mount -a -t "$NETFS" rc=$? mount -a -O _netdev @@ -15,7 +15,7 @@ case "$1" in stat_done ;; stop) - stat_busy "Unmounting Network Filesystems" + stat_busy "Unmounting network file systems" umount -a -f -O _netdev rc=$? umount -a -f -t "$NETFS" diff --git a/network b/network index 322082c..5fe19e2 100755 --- a/network +++ b/network @@ -235,10 +235,10 @@ case "$1" in # deprecation check need_legacy && deprecated if ! ck_daemon network; then - echo "Network is already running. Try 'network restart'" + echo "Network is already running. Try 'network restart'" exit fi - stat_busy "Starting Network" + stat_busy "Starting network" error=0 if need_legacy; then # bring up bridge interfaces @@ -271,11 +271,11 @@ case "$1" in # deprecation check need_legacy && deprecated if [[ $NETWORK_PERSIST =~ yes|YES && $RUNLEVEL == [06] ]]; then - status "Skipping Network Shutdown" true + status "Skipping network shutdown" true exit 0 fi - stat_busy "Stopping Network" + stat_busy "Stopping network" rm_daemon network error=0 if need_legacy; then diff --git a/rc.conf.5.txt b/rc.conf.5.txt index 726ba23..bfde2e3 100644 --- a/rc.conf.5.txt +++ b/rc.conf.5.txt @@ -15,22 +15,22 @@ SYNOPSIS DESCRIPTION ----------- The /etc/rc.conf file is the system configuration file for Arch-specific -settings. The format is bash. It contains several commonly-edited settings such -as timezone; keymap; kernel modules; daemons to load at start-up; etc. It is +settings. The format is Bash. It contains several commonly edited settings such +as time zone, keymap, kernel modules, daemons to load at start-up, etc. It is split up in a few sections to categorize configuration settings: localization, -hardware, networking and daemons. +hardware, networking, and daemons. LOCALIZATION[[L]] ----------------- *TIMEZONE=* -Specifies the timezone. The setting takes effect on boot by ensuring that /etc/localtime is a symlink -to the correct zoneinfo file. Possible timezones are the relative path to a zoneinfo file starting -from the directory /usr/share/zoneinfo. For example, a German timezone would be Europe/Berlin, +Specifies the time zone. The setting takes effect on boot by ensuring that /etc/localtime is a symlink +to the correct zoneinfo file. Possible time zones are the relative path to a zoneinfo file starting +from the directory /usr/share/zoneinfo. For example, a German time zone would be Europe/Berlin, which refers to the file /usr/share/zoneinfo/Europe/Berlin. -Note: if empty, /etc/localtime is not changed. This is useful if /etc/localtime is maintained manually -or by a third-party tool; or if there is no reason to change it from what was set during install. +Note: If empty, /etc/localtime is not changed. This is useful if /etc/localtime is maintained manually +or by a third-party tool, or if there is no reason to change it from what was set during install. Default: empty @@ -43,9 +43,9 @@ Options: - empty: fall back to the value in /var/lib/hwclock/adjtime, which defaults to UTC. This is recommended as other users of hwclock might change the adjtime file and hence cause rc.conf and adjtime to be out of sync. - "UTC": most robust, allows operating systems to abstract local time and ease DST. - - "localtime": apply timezone (and DST) in hardwareclock: discouraged. - Choose this if you dualboot with an OS which cannot handle UTC BIOS times correctly, like Windows (note - that recent Windows'es can use UTC, which is preferable). + - "localtime": apply time zone (and DST) in hardwareclock: discouraged. + Choose this if you dual-boot with an OS which cannot handle UTC BIOS times correctly, like Windows (note + that recent Windows releases can use UTC, which is preferable). - any other value will result in the hardware clock being left untouched (useful for virtualization) Default: empty @@ -87,14 +87,14 @@ Default: empty *DAEMON_LOCALE=* - - If set to 'yes', use $LOCALE as the locale during daemon startup and during the boot process. + - If set to 'yes', use $LOCALE as the locale during daemon start-up and during the boot process. - If set to 'no', the C locale is used. Default: "yes" *USECOLOR=* -Use ANSI color sequences in startup messages +Use ANSI color sequences in start-up messages Default: "yes" @@ -109,19 +109,19 @@ Default: (). *USEDMRAID=* -Scan for FakeRAID (dmraid) Volumes at startup. +Scan for FakeRAID (dmraid) volumes at start-up. Default: "no" *USEBTRFS=* -Scan for BTRFS volumes at startup. +Scan for Btrfs volumes at start-up. Default: "no" *USELVM=* -Scan for LVM volume groups at startup, required if you use LVM. +Scan for LVM volume groups at start-up. This is required if you use LVM. Default: "no" @@ -138,7 +138,7 @@ The following settings help you setting up a wired network. *interface=* -Name of device. Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces. +Name of device. Use `ip addr` or `ls /sys/class/net/` to see all available interfaces. Default: empty @@ -191,7 +191,7 @@ Required for manual configuration, ignored for DHCP. netmask= gateway= -The following options might be needed for advanced use-cases. +The following options might be needed for advanced use cases. *NETWORK_PERSIST=* @@ -201,7 +201,7 @@ Default: "no" *NETWORKS=* -This functionality is deprecated, please refer to the 'netcfg' documentation. +This functionality is deprecated; please refer to 'man 8 netcfg'. DAEMONS[[D]] ------------ @@ -212,10 +212,10 @@ Daemons to start at boot-up (in this order) - prefix a daemon with a @ to start it up in the background If you are sure nothing else touches your hardware clock (such as ntpd or -a dual-boot), you might want to enable 'hwclock'. Note that this will only +dual-booting), you might want to enable 'hwclock'. Note that this will only make a difference if the hwclock program has been calibrated correctly. -If you use a network filesystem you should enable 'netfs'. +If you use a network file system, you should enable 'netfs'. Default: (syslog-ng network crond) @@ -226,4 +226,4 @@ hostname(5), vconsole.conf(5), locale.conf(5), hwclock(8) AUTHORS ------- -Written by Dieter Plaetinck, Tom Gundersen and others. +Written by Dieter Plaetinck, Tom Gundersen, and others. diff --git a/rc.d.8.txt b/rc.d.8.txt index d0bbcce..c648e29 100644 --- a/rc.d.8.txt +++ b/rc.d.8.txt @@ -25,7 +25,7 @@ The actions supported by a rc scripts may be different from script to script, bu commonly supported actions include: *start*:: - Starts the script if it's not already running. + Starts the script if it is not already running. *stop*:: Stops a running script. @@ -73,13 +73,13 @@ Examples[[E]] Starts *sshd* and *gpm* scripts. *rc.d start --auto --stopped*:: - Starts all stopped scripts which are started at startup. + Starts all stopped scripts which are started at start-up. *rc.d stop crond*:: Stops the *crond* script. *rc.d stop --noauto*:: - Stop all script which are not runned at startup + Stops all scripts which are not started at start-up *rc.d restart crond*:: Restarts the *crond* script. diff --git a/rc.local b/rc.local index 4950cba..21254f1 100755 --- a/rc.local +++ b/rc.local @@ -1,6 +1,6 @@ #!/bin/bash # -# /etc/rc.local: Local multi-user startup script. +# /etc/rc.local: Local multi-user start-up script. # diff --git a/rc.shutdown b/rc.shutdown index c708b92..36ce5bd 100755 --- a/rc.shutdown +++ b/rc.shutdown @@ -10,7 +10,7 @@ stty onlcr echo " " -printhl "Initiating Shutdown..." +printhl "Initiating shutdown..." echo " " run_hook shutdown_start @@ -19,19 +19,19 @@ run_hook shutdown_start stop_all_daemons -status 'Saving Random Seed' /usr/lib/systemd/systemd-random-seed save +status 'Saving random seed' /usr/lib/systemd/systemd-random-seed save -[[ $TIMEZONE ]] && status "Configuring Time Zone" set_timezone "$TIMEZONE" +[[ $TIMEZONE ]] && status "Configuring time zone" set_time_zone "$TIMEZONE" # Write to wtmp file before unmounting halt -w -# stop monitoring of lvm2 groups before unmounting filesystems +# stop monitoring of LVM2 groups before unmounting file systems [[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) ]] && status "Deactivating monitoring of LVM2 groups" vgchange --monitor n # any future uevents can and should be ignored -status "Shutting down UDev" udevadm control --exit +status "Shutting down udev" udevadm control --exit run_hook shutdown_prekillall @@ -41,15 +41,15 @@ run_hook shutdown_postkillall run_hook shutdown_preumount -# unmount any non-api partitions that are backed by swap, we don't want to +# Unmount any non-API partitions that are backed by swap; we don't want to # move their contents into memory (waste of time and might caues OOM). -status "Unmounting Swap-backed Filesystems" umount_all "tmpfs" +status "Unmounting swap-backed file systems" umount_all "tmpfs" # almost everything is dead now, so the swap should hopefully be relatively # empty, and quick to switch off -status "Deactivating Swap" swapoff -a +status "Deactivating swap" swapoff -a -status "Unmounting Non-API Filesystems" umount_all +status "Unmounting non-API file systems" umount_all run_hook shutdown_postumount @@ -90,14 +90,14 @@ if [[ -x /run/initramfs/shutdown ]]; then fi fi - # make /run/initrafs a mount + # make /run/initramfs a mount mount --bind /run/initramfs /run/initramfs # in case someone has shared our mountpoints, unshare them mount --make-private /run/initramfs mount --make-private / - # bind all api mounts + # bind all API mounts mkdir -p /run/initramfs/{sys,proc,dev,run,oldroot} mount --bind /sys /run/initramfs/sys mount --bind /proc /run/initramfs/proc @@ -108,7 +108,7 @@ if [[ -x /run/initramfs/shutdown ]]; then cd /run/initramfs pivot_root . oldroot - #reexec init + # reexec init /oldroot/sbin/init u # run /shutdown in the new root @@ -116,7 +116,7 @@ if [[ -x /run/initramfs/shutdown ]]; then else - status "Remounting Root Filesystem Read-only" \ + status "Remounting root file system read-only" \ mount -o remount,ro / # Power off or reboot diff --git a/rc.single b/rc.single index aec026c..32bbcd8 100755 --- a/rc.single +++ b/rc.single @@ -1,6 +1,6 @@ #!/bin/bash # -# /etc/rc.single: Single-user startup script. +# /etc/rc.single: Single-user start-up script. # . /etc/rc.conf @@ -18,7 +18,7 @@ if [[ $PREVLEVEL != N ]]; then run_hook single_postkillall - # Start/trigger UDev, load MODULES and settle UDev + # Start/trigger udev, load MODULES and settle udev udevd_modprobe single # Removing leftover files diff --git a/rc.sysinit b/rc.sysinit index 71eea91..8a4605c 100755 --- a/rc.sysinit +++ b/rc.sysinit @@ -8,10 +8,10 @@ echo " " printhl "Arch Linux\n" -printhl "${C_H2}http://www.archlinux.org" +printhl "${C_H2}https://www.archlinux.org" printsep -# mount the api filesystems +# mount the API file systems # /proc, /sys, /run, /dev, /run/lock, /dev/pts, /dev/shm mountpoint -q /proc || mount -t proc proc /proc -o nosuid,noexec,nodev mountpoint -q /sys || mount -t sysfs sys /sys -o nosuid,noexec,nodev @@ -30,7 +30,7 @@ if [[ ! -e /run/initramfs/root-fsck ]]; then # remount root ro to allow for fsck later on, we remount now to # make sure nothing can open files rw on root which would block a remount findmnt / --options ro &>/dev/null || - status "Mounting Root Read-Only" mount -o remount,ro / + status "Mounting root read-only" mount -o remount,ro / fi run_hook sysinit_start @@ -47,14 +47,14 @@ case $HARDWARECLOCK in esac if [[ $HWCLOCK_PARAMS ]]; then - stat_busy "Adjusting system time and setting kernel timezone" + stat_busy "Adjusting system time and setting kernel time zone" - # Adjust the system time for timezone offset if rtc is not in UTC + # Adjust the system time for time zone offset if rtc is not in UTC # 1. Make creation time on device nodes sane (FS#8665) - # 2. Filesystem checks can depend on system time + # 2. File system checks can depend on system time # 3. This also sets the kernel time zone, used by e.g. vfat - # If TIMEZONE is not set in rc.conf, the timezone stored in /etc/localtime - # is used. If HARDWARECLOCK is not set in rc.conf, the value in + # If TIMEZONE is not set in /etc/rc.conf, the time zone stored in /etc/localtime + # is used. If HARDWARECLOCK is not set in /etc/rc.conf, the value in # /var/lib/hwclock/adjfile is used (in this case /var can not be a separate # partition). [[ $TIMEZONE ]] && export TZ=$TIMEZONE @@ -62,7 +62,7 @@ if [[ $HWCLOCK_PARAMS ]]; then unset TZ fi -# Start/trigger UDev, load MODULES and settle UDev +# Start/trigger udev, load MODULES, and settle udev udevd_modprobe sysinit if [[ -s /etc/locale.conf ]]; then @@ -70,9 +70,9 @@ if [[ -s /etc/locale.conf ]]; then [[ $LANG ]] && LOCALE=$LANG fi -status 'Configuring Virtual Consoles' /usr/lib/systemd/systemd-vconsole-setup +status 'Configuring virtual consoles' /usr/lib/systemd/systemd-vconsole-setup -# bring up the loopback interface +# Bring up the loopback interface [[ -d /sys/class/net/lo ]] && status "Bringing up loopback interface" ip link set up dev lo @@ -80,11 +80,11 @@ status 'Configuring Virtual Consoles' /usr/lib/systemd/systemd-vconsole-setup [[ $USEDMRAID = [Yy][Ee][Ss] && -x $(type -P dmraid) ]] && status "Activating FakeRAID arrays" dmraid -i -ay -# BTRFS devices detection +# Btrfs devices detection [[ $USEBTRFS = [Yy][Ee][Ss] && -x $(type -P btrfs) ]] && - status "Activating BTRFS volumes" btrfs device scan + status "Activating Btrfs volumes" btrfs device scan -# Activate LVM2 groups if any +# Activate LVM2 groups, if any activate_vgs # Set up non-root encrypted partition mappings @@ -96,10 +96,10 @@ if [[ -f /etc/crypttab ]] && type -p cryptsetup >/dev/null; then (( crypto_unlocked )) && activate_vgs fi -# Check filesystems +# Check file systems run_hook sysinit_prefsck if [[ -x $(type -P fsck) ]]; then - stat_busy "Checking Filesystems" + stat_busy "Checking file systems" fsck_all >|"${FSCK_OUT:-/dev/stdout}" 2>|"${FSCK_ERR:-/dev/stdout}" declare -r fsckret=$? (( fsckret <= 1 )) && stat_done || stat_fail @@ -111,25 +111,25 @@ run_hook sysinit_postfsck # Single-user login and/or automatic reboot if needed fsck_reboot $fsckret -status "Remounting Root and API filesystems" \ +status "Remounting root and API file systems" \ /usr/lib/systemd/systemd-remount-fs -# now mount all the local filesystems +# now mount all the local file systems run_hook sysinit_premount -status "Mounting Local Filesystems" \ +status "Mounting local file systems" \ mount_all run_hook sysinit_postmount -# enable monitoring of lvm2 groups, now that the filesystems are mounted rw +# Enable monitoring of LVM2 groups, now that the file systems are mounted rw [[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) && -d /sys/block ]] && status "Activating monitoring of LVM2 groups" \ vgchange --monitor y >/dev/null -status "Activating Swap" swapon -a +status "Activating swap" swapon -a -[[ $TIMEZONE ]] && status "Configuring Time Zone" set_timezone "$TIMEZONE" +[[ $TIMEZONE ]] && status "Configuring time zone" set_time_zone "$TIMEZONE" -status 'Initializing Random Seed' /usr/lib/systemd/systemd-random-seed load +status 'Initializing random seed' /usr/lib/systemd/systemd-random-seed load # Remove leftover files remove_leftover @@ -138,11 +138,11 @@ if [[ -s /etc/hostname ]]; then HOSTNAME=$(< /etc/hostname) fi if [[ $HOSTNAME ]]; then - stat_busy "Setting Hostname: $HOSTNAME" + stat_busy "Setting hostname: $HOSTNAME" echo "$HOSTNAME" >| /proc/sys/kernel/hostname && stat_done || stat_fail fi -stat_busy "Saving dmesg Log" +stat_busy "Saving dmesg log" if [[ -e /proc/sys/kernel/dmesg_restrict ]] && (( $(< /proc/sys/kernel/dmesg_restrict) == 1 )); then install -Tm 0600 <( dmesg ) /var/log/dmesg.log -- 1.7.11

3 4

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository annotated tag 2012.06.2 created. 2012.06.2
by tomegun＠archlinux.org 22 Jun '12

22 Jun '12

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The annotated tag, 2012.06.2 has been created at 26e70f86438cc561c6241e8fcfe8252b91e4ded5 (tag) tagging a1bdf9a73c6c7752634f3bbce4c1ff38d6ab7b7f (commit) replaces 2012.06.1 tagged by Tom Gundersen on Fri Jun 22 20:51:19 2012 +0200 - Log ----------------------------------------------------------------- fix vconsole setup problems fix kexec support use the systemd binary for remountinging API and rootfs Dave Reisner (5): use systemd-remount-fs to remount root remove checks for /var/run and /var/lock as symlinks check for a loaded kernel on reboot avoid check for /sys/block rc.sysinit: look for correct root fsck marker Tom Gundersen (6): module-load: silence rc.sysinit: remove warnings PKGBUILD: remove dep on grep locale: make sure LANG is always set as this is used in vconsole-setup to decide if we want utf8 mode rc.sysinit: change ordering a bit PKGBUILD: remove duplicate makedepends line ----------------------------------------------------------------------- hooks/post-receive -- Arch Linux initscripts repository

2 1

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository annotated tag 2012.06.2 updated. 2012.06.2
by tomegun＠archlinux.org 22 Jun '12

22 Jun '12

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The annotated tag, 2012.06.2 has been updated to 9d0028fa9d7e035a60f10d649c6d887a0fe78e94 (tag) from 26e70f86438cc561c6241e8fcfe8252b91e4ded5 (which is now obsolete) tagging 9b3b01214d575f2cb9dc2009ddd203cb8ae54f35 (commit) replaces 2012.06.1 tagged by Tom Gundersen on Fri Jun 22 23:36:41 2012 +0200 - Log ----------------------------------------------------------------- fix vconsole setup problems fix kexec support use the systemd binary for remountinging API and rootfs Dave Reisner (5): use systemd-remount-fs to remount root remove checks for /var/run and /var/lock as symlinks check for a loaded kernel on reboot avoid check for /sys/block rc.sysinit: look for correct root fsck marker Tom Gundersen (6): module-load: silence rc.sysinit: remove warnings PKGBUILD: remove dep on grep locale: make sure LANG is always set as this is used in vconsole-setup to decide if we want utf8 mode rc.sysinit: change ordering a bit PKGBUILD: remove duplicate makedepends line ----------------------------------------------------------------------- hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository branch master updated. 2012.06.1-11-g9b3b012
by tomegun＠archlinux.org 22 Jun '12

22 Jun '12

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The branch, master has been updated via 9b3b01214d575f2cb9dc2009ddd203cb8ae54f35 (commit) via f57e6f1d0d767cebebc10075276cd02f0233655c (commit) via cef9b198f20d25ba93c0d1dfc030951157c5e973 (commit) from da385eb74e5f0f1ecf04a762cae221e69c68bbc6 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 9b3b01214d575f2cb9dc2009ddd203cb8ae54f35 Author: Tom Gundersen <teg(a)jklm.no> Date: Fri Jun 22 22:55:31 2012 +0200 PKGBUILD: remove duplicate makedepends line This really does not matter very much, as this PKGBUILD file is for convenience when building from git only. However, it just tripped me up and caused me some needless head-scratching, so sort it out. Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit f57e6f1d0d767cebebc10075276cd02f0233655c Author: Tom Gundersen <teg(a)jklm.no> Date: Sat Jun 16 02:22:07 2012 +0200 rc.sysinit: change ordering a bit Export LANG as early as possible. Then start the log. Then setup the console. Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit cef9b198f20d25ba93c0d1dfc030951157c5e973 Author: Tom Gundersen <teg(a)jklm.no> Date: Sat Jun 16 01:49:58 2012 +0200 locale: make sure LANG is always set as this is used in vconsole-setup to decide if we want utf8 mode We no longer use LOCALE, so no need to set this. Reported-by: Thomas Bächler <thomas(a)archlinux.org> Signed-off-by: Tom Gundersen <teg(a)jklm.no> ----------------------------------------------------------------------- Summary of changes: PKGBUILD | 1 - rc.sysinit | 21 +++++++++++---------- 2 files changed, 11 insertions(+), 11 deletions(-) hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] [netcfg] [PATCH] Do without temporary file for netcfg-menu dialog
by Henrik Hallberg 22 Jun '12

22 Jun '12

Signed-off-by: Henrik Hallberg <henrik(a)k2h.se> --- scripts/netcfg-menu | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) diff --git a/scripts/netcfg-menu b/scripts/netcfg-menu index d0db762..0fc0736 100755 --- a/scripts/netcfg-menu +++ b/scripts/netcfg-menu @@ -3,7 +3,7 @@ . /usr/lib/network/network if ! type dialog &> /dev/null; then - echo "Please install 'dialog' to use netcfg-menu" + echo 'Please install '\'dialog\'' to use netcfg-menu' exit 1 fi @@ -17,7 +17,7 @@ i=0 # JP: change for prof to while read prof to avoid assumption that profile names are always single tokens (no spaces etc.) while read prof; do # if there is a profile called "main", Use as default - [[ "$prof" = "main" ]] && DEFAULT="main" + [[ "$prof" = main ]] && DEFAULT=main profiles[i++]="$prof" profiles[i++]=$(. "$PROFILE_DIR/$prof"; echo "$DESCRIPTION") done < <(list_profiles | sort) # JP: re-use list_profiles instead of duplicating it; avoid subshell we'd get by piping it to the while read... @@ -29,29 +29,23 @@ fi [[ -n "$NETWORKS_MENU_DEFAULT" ]] && DEFAULT="$NETWORKS_MENU_DEFAULT" # if no default yet, use the first entry [[ -z "$DEFAULT" ]] && DEFAULT="${profiles[0]}" -ANSWER=$(mktemp --tmpdir menu.XXXXXXXX) || exit 1 # Set timeout if [[ -z "$1" ]]; then - TIMEOUT="0" + TIMEOUT=0 else TIMEOUT="$1" fi # Display Dialog -dialog --timeout "$TIMEOUT" --default-item "$DEFAULT" \ - --menu "Select the network profile you wish to use" \ - 13 50 6 "${profiles[@]}" 2> "$ANSWER" - +PROFILE=$(dialog --timeout "$TIMEOUT" --default-item "$DEFAULT" --stdout \ + --menu 'Select the network profile you wish to use' \ + 13 50 6 "${profiles[@]}") ret=$? - case $ret in 1) ;; # Cancel - do nothing - 255) # timeout - use default - PROFILE=$DEFAULT;;& - 0) # User selection - PROFILE=$(< "$ANSWER");;& - 255|0) + 255|0) # Timeout (use default) or user selection + [[ -z "$PROFILE" ]] && PROFILE="$DEFAULT" profile_up "$PROFILE" ret=$? (( ret == 0 )) && echo "$PROFILE" > "$STATE_DIR/menu" @@ -60,7 +54,7 @@ case $ret in exit_err "Abnormal ret code from dialog: $ret" ;; esac -rm -f "$ANSWER" # JP: add -f + exit $ret # JP: exit with caught $? # vim: ft=sh ts=4 et sw=4: -- 1.7.11

3 4

[arch-projects] [dbscripts] [GIT] Official repo DB scripts annotated tag 20120616 created. 20120616
by pierre＠archlinux.org 16 Jun '12

16 Jun '12

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Official repo DB scripts". The annotated tag, 20120616 has been created at 8b915ad3b0e744a09051f768570c65ec187fe9e5 (tag) tagging 7fdc74786a59c69d41524d5f311f856cfa9a99c6 (commit) replaces 20120610 tagged by Pierre Schmitz on Sat Jun 16 19:59:34 2012 +0200 - Log ----------------------------------------------------------------- tagging -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQEcBAABAgAGBQJP3MmKAAoJEH8tQ0uXQeisZQoIAL+VBLybMYaYjckJADoD7eQC cQ46DIR+fnDwqSYXEvo/o02UyNPuP2uFEpAiKDIyemfrx6lKvbFiOm8Xzeq6EDkD bd5B30DvPo/SQidXDZ8EuyH/f6b7x6MC9LMZWVzbnkvZKk5dhK8bt7QaQ5Ghz7Ql 9xmmVEUJaazx+1xWgKFy/oe6MgearhwbmDzvQBAEwxPlcMOK+HBazqd8CYBsnbpG nk7vMf1/seUF/XUmwmX2LGZGuAw/5Ts95P3EB/7+KC+Afy5JTpo6BfFfYPThC672 Uyjkf7sPsDveFNGwceG1YpaNXmYRBLSl34db6+5jA4FLAWs8oC0o7zTS5RJZ8+g= =YvvR -----END PGP SIGNATURE----- Pierre Schmitz (2): Reduce output when downloading sources Fix handling of package sources containg files with an @ character ----------------------------------------------------------------------- hooks/post-receive -- Official repo DB scripts

1 0

[arch-projects] [dbscripts] [GIT] Official repo DB scripts branch master updated. 20120610-2-g7fdc747
by pierre＠archlinux.org 16 Jun '12

16 Jun '12

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Official repo DB scripts". The branch, master has been updated via 7fdc74786a59c69d41524d5f311f856cfa9a99c6 (commit) from 8bd650da942c2a112de8f3d33ba727ae7be7ffd3 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 7fdc74786a59c69d41524d5f311f856cfa9a99c6 Author: Pierre Schmitz <pierre(a)archlinux.de> Date: Sat Jun 16 19:48:25 2012 +0200 Fix handling of package sources containg files with an @ character ----------------------------------------------------------------------- Summary of changes: db-move | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) hooks/post-receive -- Official repo DB scripts

1 0

[arch-projects] [devtools] [GIT] The official devtools repository annotated tag 20120616 created. 20120616
by pierre＠archlinux.org 16 Jun '12

16 Jun '12

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The official devtools repository". The annotated tag, 20120616 has been created at e02750b420cf7eba7d588069472c2432d4f92081 (tag) tagging d2ec5ab67d97aa69b09381cd2aafe59a9d2095c3 (commit) replaces 20120612 tagged by Pierre Schmitz on Sat Jun 16 17:06:22 2012 +0200 - Log ----------------------------------------------------------------- tagging -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQEcBAABAgAGBQJP3KDvAAoJEH8tQ0uXQeisKxsH/0x/lPcFNo56RnHNsOGt0npT WkIyDJO3x1gJLl1E+P5q1+jpOMYJbgEu/X3htd48q0xHaZOhrXf/lzW7ou4gRqIG ZotJQV9RFh4dAl45fcq5frNqC+4SQlWtpjZv1HF+Q0reQOU6FLLP3nwwEji9i7S9 z/N3GvsBoWHt3c8U+oAvUEtan59R7S/S9GMgT2BoiCRNQa5eU0ojkkI1x7Nekw+z ZyEsuALulwtbadC8Gq+JL5wvLk/LLtXJmdOUi7Won3557fg16ox443Eyd1oSONBs 9OJ7dtW7u+a1Gx3OE7UO+9uV342MP8errZ4wmeI/fFyKnhHu3zzSrRM4+3LEl3A= =JeKH -----END PGP SIGNATURE----- Allan McRae (1): Fix /run permissions in chroot Pierre Schmitz (5): archbuild: use flock -n as we do elsewhere archbuild: do not cross filesystems when removing the chroot copies mkarchroot: reset trap so it wont be called twice commitpkg: check if there are any packages to process before doing so prepare release ----------------------------------------------------------------------- hooks/post-receive -- The official devtools repository

1 0

[arch-projects] [devtools] [GIT] The official devtools repository branch master updated. 20120612-6-gd2ec5ab
by pierre＠archlinux.org 16 Jun '12

16 Jun '12

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The official devtools repository". The branch, master has been updated via d2ec5ab67d97aa69b09381cd2aafe59a9d2095c3 (commit) via a23d93ce7f124cd14ba6b6d4521c940d9336849b (commit) via 246b8ead603db3c1a8bbc0ae1a0007bda3821c6c (commit) via b14a1b1bcc677637e135f4bfcbde65914d3e2f82 (commit) via 0cd9e1ae7e9d52b0aa5896336c692fc2111554bd (commit) from 3734c80bf74744f29543a8ffdfb00e350985e2d8 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit d2ec5ab67d97aa69b09381cd2aafe59a9d2095c3 Author: Pierre Schmitz <pierre(a)archlinux.de> Date: Sat Jun 16 17:06:15 2012 +0200 prepare release commit a23d93ce7f124cd14ba6b6d4521c940d9336849b Author: Pierre Schmitz <pierre(a)archlinux.de> Date: Sat Jun 16 16:56:42 2012 +0200 commitpkg: check if there are any packages to process before doing so commit 246b8ead603db3c1a8bbc0ae1a0007bda3821c6c Author: Pierre Schmitz <pierre(a)archlinux.de> Date: Sat Jun 16 16:21:55 2012 +0200 mkarchroot: reset trap so it wont be called twice commit b14a1b1bcc677637e135f4bfcbde65914d3e2f82 Author: Pierre Schmitz <pierre(a)archlinux.de> Date: Sat Jun 16 15:28:52 2012 +0200 archbuild: do not cross filesystems when removing the chroot copies commit 0cd9e1ae7e9d52b0aa5896336c692fc2111554bd Author: Pierre Schmitz <pierre(a)archlinux.de> Date: Sat Jun 16 15:24:16 2012 +0200 archbuild: use flock -n as we do elsewhere ----------------------------------------------------------------------- Summary of changes: Makefile | 2 +- archbuild.in | 13 ++++++++----- commitpkg.in | 20 +++++++++++--------- lib/common.sh | 2 +- mkarchroot.in | 1 + 5 files changed, 22 insertions(+), 16 deletions(-) hooks/post-receive -- The official devtools repository

1 0