November 2013 - Pacman-dev - lists.archlinux.org

[pacman-dev] [PATCH] Color output from pm_vfprintf
by Allan McRae 21 Nov '13

21 Nov '13

This makes sure warning and error messages from _alpm_log are colored. Fixes FS#35160. Signed-off-by: Allan McRae <allan(a)archlinux.org> --- src/pacman/util.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/src/pacman/util.c b/src/pacman/util.c index 23eea98..05135d7 100644 --- a/src/pacman/util.c +++ b/src/pacman/util.c @@ -1593,10 +1593,12 @@ int pm_vasprintf(char **string, alpm_loglevel_t level, const char *format, va_li /* print a prefix to the message */ switch(level) { case ALPM_LOG_ERROR: - pm_asprintf(string, _("error: %s"), msg); + pm_asprintf(string, "%s%s%s%s", config->colstr.err, _("error: "), + config->colstr.nocolor, msg); break; case ALPM_LOG_WARNING: - pm_asprintf(string, _("warning: %s"), msg); + pm_asprintf(string, "%s%s%s%s", config->colstr.warn, _("warning: "), + config->colstr.nocolor, msg); break; case ALPM_LOG_DEBUG: pm_asprintf(string, "debug: %s", msg); -- 1.8.4.2

1 1

[pacman-dev] [PATCH 0/1] Change to the way pmenv and pmtest connect.
by Jeremy Heiner 19 Nov '13

19 Nov '13

This change was needed in a rescinded patch, and even though it is no longer required I still think it is an improvement that may be worth keeping. Prior to this change each pmtest searched the PATH envar to get the full paths to the fakeroot and fakechroot commands (used to fork the pacman binary being tested). That search logically fits better in the pmenv. And that change leads naturally to a slightly less verbose API for when the pmenv is calling pmtest methods. Jeremy Heiner (1): Simplify pmtest.generate and .run API (removed pacman parameter). test/pacman/pmenv.py | 13 ++++++++++--- test/pacman/pmtest.py | 30 +++++++++++++----------------- 2 files changed, 23 insertions(+), 20 deletions(-) -- 1.8.4.2

2 3

[pacman-dev] Fwd: [PATCH] pacdiff: do not remove pacfile after viewing, but ask user
by Vasiliy Korchagin 18 Nov '13

18 Nov '13

Hi all, I often use pacdiff tool for updating config files. And I find it very inconvenient that after viewing files in vimdiff, I have the only choice to delete pacfile. It would be more useful to ask user what to do next with standard set of choices (view, skip, remove, overwrite). One line patch is attached. Kind regards, Vasiliy.

3 4

[pacman-dev] [PATCH] pacscripts: Don't ask if sudo is installed; just check for it and inform the user
by Jason St. John 18 Nov '13

18 Nov '13

Have pacscripts check if "sudo" is installed when the sudo binary cannot be found, and remove the "Is sudo installed?" question. Signed-off-by: Jason St. John <jstjohn(a)purdue.edu> --- It doesn't make sense to force the user to run "pacman -Qi sudo", when we can easily check if sudo is installed automatically and inform the user. contrib/pacscripts.sh.in | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/contrib/pacscripts.sh.in b/contrib/pacscripts.sh.in index 8453f9c..7ab7b0d 100644 --- a/contrib/pacscripts.sh.in +++ b/contrib/pacscripts.sh.in @@ -71,8 +71,12 @@ spacman() { pacman "$@" else if ! type -p sudo; then - error "Cannot find the sudo binary! Is sudo installed?" - error "Otherwise, try to run the program as root" + error "Cannot find the sudo binary!" + if [ "$(pacman -Qq sudo)" != "sudo" ]; then + error "\"sudo\" is not installed. Either install it or run the program as root." + else + error "However, \"sudo\" appears to be installed. Try running the program as root." + fi exit 1 else sudo pacman "$@" -- 1.8.4.2

3 5

[pacman-dev] [PATCH v2] pacscripts: Improve error message when sudo binary is not found
by Jason St. John 16 Nov '13

16 Nov '13

Signed-off-by: Jason St. John <jstjohn(a)purdue.edu> --- This is a resubmit of my previous patch here: https://mailman.archlinux.org/pipermail/pacman-dev/2013-November/018212.html contrib/pacscripts.sh.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/contrib/pacscripts.sh.in b/contrib/pacscripts.sh.in index 8453f9c..da7c55a 100644 --- a/contrib/pacscripts.sh.in +++ b/contrib/pacscripts.sh.in @@ -71,8 +71,8 @@ spacman() { pacman "$@" else if ! type -p sudo; then - error "Cannot find the sudo binary! Is sudo installed?" - error "Otherwise, try to run the program as root" + error "Cannot find the sudo binary!" + error "${myname} requires root privileges. Either install \"sudo\" or run as root." exit 1 else sudo pacman "$@" -- 1.8.4.2

1 0

[pacman-dev] [PATCH] Close file descirptor before fork
by Allan McRae 15 Nov '13

15 Nov '13

From: Wolfgang Bumiller <wry.git(a)bumiller.com> FreeBSD chroot(2) fails with EPERM when a directory file descriptor is open with either `kern.chroot_allow_open_directories` being 0, or when the process already is inside a chroot. This is exposed in alpm_run_chroot that uses opendir() to open a file descriptor to the current directory before doing the forking and chrooting. Since the file descriptor is not used in the forked process, we close it. Fixes FS#36161. Signed-off-by: Allan McRae <allan(a)archlinux.org> --- lib/libalpm/util.c | 1 + 1 file changed, 1 insertion(+) diff --git a/lib/libalpm/util.c b/lib/libalpm/util.c index f9fdb01..40a5ebd 100644 --- a/lib/libalpm/util.c +++ b/lib/libalpm/util.c @@ -542,6 +542,7 @@ int _alpm_run_chroot(alpm_handle_t *handle, const char *cmd, char *const argv[]) while(dup2(pipefd[1], 2) == -1 && errno == EINTR); close(pipefd[0]); close(pipefd[1]); + close(cwdfd); /* use fprintf instead of _alpm_log to send output through the parent */ if(chroot(handle->root) != 0) { -- 1.8.4.2

1 0

[pacman-dev] [PATCH] Fix misspellings and some grammar issues in output of some pacman contrib scripts
by Jason St. John 15 Nov '13

15 Nov '13

Affected files: -- contrib/bacman.sh.in -- contrib/paccache.sh.in -- contrib/pacdiff.sh.in -- contrib/rankmirrors.sh.in Signed-off-by: Jason St. John <jstjohn(a)purdue.edu> --- My Vim function to trim trailing whitespace caught some, but it seemed insignificant enough to not warrant an explicit mention in the commit message. contrib/bacman.sh.in | 4 ++-- contrib/paccache.sh.in | 4 ++-- contrib/pacdiff.sh.in | 10 +++++----- contrib/rankmirrors.sh.in | 41 +++++++++++++++++++++++++++++------------ 4 files changed, 38 insertions(+), 21 deletions(-) diff --git a/contrib/bacman.sh.in b/contrib/bacman.sh.in index a20c5e7..222b0f8 100644 --- a/contrib/bacman.sh.in +++ b/contrib/bacman.sh.in @@ -210,8 +210,8 @@ while read i; do # Workaround to bsdtar not reporting a missing file as an error if ! [[ -e $package_file || -L $package_file ]]; then error "unable to add $local_file to the package" - plain " If your user does not have permission to read this file then" - plain " you will need to run $myname as root" + plain " If your user does not have permission to read this file, then" + plain " you will need to run $myname as root." rm -rf "$work_dir" exit 1 fi diff --git a/contrib/paccache.sh.in b/contrib/paccache.sh.in index 10eab21..8db1eae 100644 --- a/contrib/paccache.sh.in +++ b/contrib/paccache.sh.in @@ -147,7 +147,7 @@ summarize() { fi printf '\n' >&2 - msg "$output (diskspace saved: %s)" "$(size_to_human "$totalsaved")" + msg "$output (disk space saved: %s)" "$(size_to_human "$totalsaved")" } usage() { @@ -269,7 +269,7 @@ esac die "cachedir '%s' does not exist or is not a directory" "$cachedir" [[ $movedir && ! -d $movedir ]] && - die "move-to directory '%s' does not exist or is not a directory" "$movedir" + die "destination directory '%s' does not exist or is not a directory" "$movedir" if (( move || delete )); then # make it an absolute path since we're about to chdir diff --git a/contrib/pacdiff.sh.in b/contrib/pacdiff.sh.in index 1bad0e4..8d43348 100644 --- a/contrib/pacdiff.sh.in +++ b/contrib/pacdiff.sh.in @@ -39,7 +39,7 @@ A simple program to merge or remove pacnew/pacorig/pacsave files. Usage: $myname [-l | -f | -p] [--nocolor] -Search Options: select one, default: pacmandb +Search Options: select one (default: --pacmandb) -l/--locate scan using locate -f/--find scan using find -p/--pacmandb scan active config files from pacman database @@ -73,7 +73,7 @@ print_existing_pacsave(){ for f in "${1}"?(.+([0-9])); do [[ -f $f ]] && printf '%s\0' "$f" done -} +} cmd() { if (( USE_LOCATE )); then @@ -94,7 +94,7 @@ cmd() { fi } -while [[ -n "$1" ]]; do +while [[ -n "$1" ]]; do case "$1" in -l|--locate) USE_LOCATE=1;; @@ -138,7 +138,7 @@ if (( USE_PACDB )); then eval $(awk '/DBPath/ {print $1$2$3}' @sysconfdir@/pacman.conf) pac_db="${DBPath:-@localstatedir@/lib/pacman/}local" if [[ ! -d "${pac_db}" ]]; then - error "unable to read pacman db %s". "${pac_db}" + error "unable to read pacman database %s". "${pac_db}" usage; exit 1 fi fi @@ -147,7 +147,7 @@ fi while IFS= read -u 3 -r -d '' pacfile; do file="${pacfile%.pac*}" file_type="pac${pacfile##*.pac}" - + if (( OUTPUTONLY )); then echo "$pacfile" continue diff --git a/contrib/rankmirrors.sh.in b/contrib/rankmirrors.sh.in index 0c4c734..453ebfb 100644 --- a/contrib/rankmirrors.sh.in +++ b/contrib/rankmirrors.sh.in @@ -130,8 +130,15 @@ while [[ $1 ]]; do version) version ;; times) TIMESONLY=1 ; shift ;; verbose) VERBOSE=1 ; shift ;; - url) CHECKURL=1; [[ $2 ]] || err "Must specify url."; URL="$2"; shift 2;; - repo) [[ $2 ]] || err "Must specify repo name."; TARGETREPO="$2"; shift 2;; + url) + CHECKURL=1; + [[ $2 ]] || err "Must specify URL."; + URL="$2"; + shift 2;; + repo) + [[ $2 ]] || err "Must specify repository name."; + TARGETREPO="$2"; + shift 2;; *) err "'$1' is an invalid argument." esac elif [[ ${1:0:1} = - ]]; then @@ -148,9 +155,19 @@ while [[ $1 ]]; do h) usage ;; t) TIMESONLY=1 ;; v) VERBOSE=1 ;; - u) CHECKURL=1; [[ $2 ]] || err "Must specify url."; URL="$2"; snum=2;; - r) [[ $2 ]] || err "Must specify repo name."; TARGETREPO="$2"; snum=2;; - n) [[ $2 ]] || err "Must specify number." ; NUM="$2" ; snum=2;; + u) + CHECKURL=1; + [[ $2 ]] || err "Must specify URL."; + URL="$2"; + snum=2;; + r) + [[ $2 ]] || err "Must specify repository name."; + TARGETREPO="$2"; + snum=2;; + n) + [[ $2 ]] || err "Must specify number."; + NUM="$2"; + snum=2;; *) err "'$1' is an invalid argument." ;; esac done @@ -168,22 +185,22 @@ done # Some sanity checks [[ $NUM ]] || NUM=0 -[[ $FILE && $CHECKURL ]] && err "Cannot specify a url and mirrorfile." -[[ $FILE || $CHECKURL || $STDIN ]] || err "Must specify url, mirrorfile, or stdin." +[[ $FILE && $CHECKURL ]] && err "Cannot specify a URL and mirrorfile." +[[ $FILE || $CHECKURL || $STDIN ]] || err "Must specify URL, mirrorfile, or stdin." -# Single url handling +# Single URL handling if [[ $CHECKURL ]]; then url="$(getfetchurl "$URL")" - [[ $url = fail ]] && err "url '$URL' is malformed." + [[ $url = fail ]] && err "URL '$URL' is malformed." [[ $VERBOSE ]] && echo "Testing $url..." time=$(gettime "$url") echo "$URL : $time" exit 0 fi -# Get url results from mirrorfile, fill up the array, and so on +# Get URL results from mirrorfile, fill up the array, and so on if [[ $TIMESONLY ]]; then - echo "Querying servers, this may take some time..." + echo "Querying servers. This may take some time..." elif [[ $FILE ]]; then echo "# Server list generated by rankmirrors on $(date +%Y-%m-%d)" fi @@ -198,7 +215,7 @@ for line in "${linearray[@]}"; do server="${line#*= }" server="${server%%#*}" url="$(getfetchurl "$server")" - [[ $url = fail ]] && err "url '$URL' is malformed." + [[ $url = fail ]] && err "URL '$URL' is malformed." time=$(gettime "$url") timesarray+=("$time $server") -- 1.8.4.2

1 0

[pacman-dev] [PATCH] .gitignore: Add intl directory.
by Allan McRae 15 Nov '13

15 Nov '13

Signed-off-by: Allan McRae <allan(a)archlinux.org> --- .gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/.gitignore b/.gitignore index f565b43..df0f138 100644 --- a/.gitignore +++ b/.gitignore @@ -13,6 +13,7 @@ configure.lineno cscope.in.out cscope.out cscope.po.out +intl libtool Makefile Makefile.in -- 1.8.4.2

1 0

[pacman-dev] [PATCH] paccache: clarify help output
by Allan McRae 15 Nov '13

15 Nov '13

The help output referred to variables in the script rather than what they were labelled in the parameter argument. Signed-off-by: Allan McRae <allan(a)archlinux.org> --- contrib/paccache.sh.in | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/contrib/paccache.sh.in b/contrib/paccache.sh.in index 10eab21..885193f 100644 --- a/contrib/paccache.sh.in +++ b/contrib/paccache.sh.in @@ -160,19 +160,19 @@ Usage: ${myname} <operation> [options] [targets...] Operations: -d, --dryrun perform a dry run, only finding candidate packages. - -m, --move <dir> move candidate packages to "movedir". + -m, --move <dir> move candidate packages to "dir". -r, --remove remove candidate packages. Options: -a, --arch <arch> scan for "arch" (default: all architectures). - -c, --cachedir <dir> scan "cachedir" for packages. + -c, --cachedir <dir> scan "dir" for packages. (default: @localstatedir@/cache/pacman/pkg). -f, --force apply force to mv(1) and rm(1) operations. -h, --help display this help message and exit. -i, --ignore <pkgs> ignore "pkgs", comma-separated. Alternatively, specify "-" to read package names from stdin, newline- delimited. - -k, --keep <num> keep "num" of each package in "cachedir" (default: 3). + -k, --keep <num> keep "num" of each package in the cache (default: 3). --nocolor remove color from output. -u, --uninstalled target uninstalled packages. -v, --verbose increase verbosity. specify up to 3 times. -- 1.8.4.2

1 0

[pacman-dev] [GIT] The official pacman repository branch, master, updated. v4.1.2-207-ga15fd48
by allan＠archlinux.org 15 Nov '13

15 Nov '13

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The official pacman repository". The branch, master has been updated via a15fd48016014249a13db7a437b5e4f5937f6158 (commit) via 7bfaa358ea45c5d527a382bb5fef734b3134bd6f (commit) via 1645dfd3d120f26f9d59a952c89ea35514f14992 (commit) via 230bd5c2fd11f6256e1ab16c2e5997a8d8228461 (commit) via b7b3f9c5e7903272bef32792ab28615f434d3ec8 (commit) via d78f45ae0c11fb19a1a0bf30728386e9febe0705 (commit) via ea6aeef8bae01d934cb4aab6d915e0e3e8276df1 (commit) via 0da98ec6bac17b4f56b67a6f5b2fa24896671a9f (commit) via 5273e38fb254d6bfb9bce9078d346f3c08a294b1 (commit) via da8cd388c4fd95d1748285e4d6bd549c776ef5e1 (commit) via 57090d8cba65988b822a215947a5fb44d55790d0 (commit) via af284d5fdb0ef15dbb7a2082380e2ec586599774 (commit) via 88df07717de868dc2bd2424afefaea6c77efa4c0 (commit) via 14cc790c59e55f4a3f4d7fc47a2f60c468c5887b (commit) via 0c180cb7cc890fdf162f3624d3fbeb6af95d2557 (commit) via fe824f87b9f1e40d88bd1a190a0bc1c80f2e91eb (commit) via 5c5b28833c0c47d31c58d40cd13b69227de6eb48 (commit) from d5acf7a44a41c0ac8224895a9f15f3d04e80811d (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit a15fd48016014249a13db7a437b5e4f5937f6158 Author: Jason St. John <jstjohn(a)purdue.edu> Date: Fri Nov 8 02:53:33 2013 -0500 Improve --help switch output for pacman contrib and pacman scripts Unify the formatting of the --help switch for pacman utils, if it exists. All of the pacman utils will now output help text using the following format: util-name (pacman) v<pacman version> one line description of util's purpose Usage: util-name [options] -b, --bar whatever --bar does -f, --foo whatever --foo does -h, --help display this help message Reported-by: Karol Błażewicz <karol.blazewicz at gmail.com> Signed-off-by: Jason St. John <jstjohn(a)purdue.edu> commit 7bfaa358ea45c5d527a382bb5fef734b3134bd6f Author: Jason St. John <jstjohn(a)purdue.edu> Date: Fri Nov 8 13:21:46 2013 -0500 Replace "echo" command with "printf" in human_to_size_test.sh Signed-off-by: Jason St. John <jstjohn(a)purdue.edu> Signed-off-by: Allan McRae <allan(a)archlinux.org> commit 1645dfd3d120f26f9d59a952c89ea35514f14992 Author: Jason St. John <jstjohn(a)purdue.edu> Date: Fri Nov 8 00:49:05 2013 -0500 Fix typo in pacman-optimize Signed-off-by: Jason St. John <jstjohn(a)purdue.edu> Signed-off-by: Allan McRae <allan(a)archlinux.org> commit 230bd5c2fd11f6256e1ab16c2e5997a8d8228461 Author: Jason St. John <jstjohn(a)purdue.edu> Date: Fri Nov 8 00:44:40 2013 -0500 Fix whitespace and other formatting issues This commit: -- replaces space-based indents with tabs per the coding standards -- removes extraneous whitespace (e.g. extra spaces between function args) -- adds missing braces for a one-line if statement Signed-off-by: Jason St. John <jstjohn(a)purdue.edu> commit b7b3f9c5e7903272bef32792ab28615f434d3ec8 Author: Jason St. John <jstjohn(a)purdue.edu> Date: Thu Nov 7 23:26:19 2013 -0500 Fix minor grammatical issues in doc/index.txt Signed-off-by: Jason St. John <jstjohn(a)purdue.edu> Signed-off-by: Allan McRae <allan(a)archlinux.org> commit d78f45ae0c11fb19a1a0bf30728386e9febe0705 Author: Andrew Gregory <andrew.gregory.8(a)gmail.com> Date: Tue Nov 5 11:29:55 2013 -0500 log important events from the backend This ensures that important events will be logged and consistent regardless of the frontend. The need for global context in the event callback is also removed. The event is logged before any post_* scripts run, so this also moves the post_* script output underneath the event in the log. Fixes FS#36504 Signed-off-by: Andrew Gregory <andrew.gregory.8(a)gmail.com> Signed-off-by: Allan McRae <allan(a)archlinux.org> commit ea6aeef8bae01d934cb4aab6d915e0e3e8276df1 Author: Andrew Gregory <andrew.gregory.8(a)gmail.com> Date: Tue Nov 5 08:50:44 2013 -0500 Makefile.am: fix typo in LOG_DRIVER variable Self-executing tests were not being run through the tap log driver. This caused `make check` to ignore discrepancies between the expected number of tests and the actual number of tests. Also, fix some uncommented output from test scripts that could confuse TAP parsers. Signed-off-by: Andrew Gregory <andrew.gregory.8(a)gmail.com> Signed-off-by: Allan McRae <allan(a)archlinux.org> commit 0da98ec6bac17b4f56b67a6f5b2fa24896671a9f Author: Allan McRae <allan(a)archlinux.org> Date: Fri Nov 1 22:13:46 2013 +1000 Ignore makedepend and checkdepend entries when parsing .PKGINFO file Signed-off-by: Allan McRae <allan(a)archlinux.org> commit 5273e38fb254d6bfb9bce9078d346f3c08a294b1 Author: Allan McRae <allan(a)archlinux.org> Date: Fri Nov 1 21:24:46 2013 +1000 makepkg: move update_pkgver out of extract_sources The extract_sources function should be just extracting sources. Signed-off-by: Allan McRae <allan(a)archlinux.org> commit da8cd388c4fd95d1748285e4d6bd549c776ef5e1 Author: Allan McRae <allan(a)archlinux.org> Date: Fri Nov 1 21:48:17 2013 +1000 Return zero from extract_file with local source file The call to bsdtar to check if a file needs extracted returns 1 if it does not. We then propegate this return value accidentally which can cause makepkg to report an error later on. Explicitly return 0 in this case. Signed-off-by: Allan McRae <allan(a)archlinux.org> commit 57090d8cba65988b822a215947a5fb44d55790d0 Author: Andrew Gregory <andrew.gregory.8(a)gmail.com> Date: Sat Oct 26 11:32:15 2013 -0400 alpm_handle: store lock file descriptor There was a brief window between opening the file descriptor and creating a stream to it. If the process was interrupted during that window the lock file would not be removed correctly. The pid is no longer printed to the lock file as this was virtually meaningless for lock files on NFS. Fixes FS#35603 Signed-off-by: Andrew Gregory <andrew.gregory.8(a)gmail.com> Signed-off-by: Allan McRae <allan(a)archlinux.org> commit af284d5fdb0ef15dbb7a2082380e2ec586599774 Author: Andrew Gregory <andrew.gregory.8(a)gmail.com> Date: Mon Oct 28 09:58:28 2013 -0400 support ALPM_SIG_USE_DEFAULT for file siglevels This brings file siglevels in line with how db siglevels are handled. Signed-off-by: Andrew Gregory <andrew.gregory.8(a)gmail.com> Signed-off-by: Allan McRae <allan(a)archlinux.org> commit 88df07717de868dc2bd2424afefaea6c77efa4c0 Author: Jason St. John <jstjohn(a)purdue.edu> Date: Thu Oct 31 17:31:32 2013 -0400 Remove spaces between the opening "if" and the opening parenthesis Signed-off-by: Jason St. John <jstjohn(a)purdue.edu> Signed-off-by: Allan McRae <allan(a)archlinux.org> commit 14cc790c59e55f4a3f4d7fc47a2f60c468c5887b Author: Jason St. John <jstjohn(a)purdue.edu> Date: Thu Oct 31 17:55:54 2013 -0400 Use title case for a heading in HACKING; fix capitalization of "Vim" in HACKING Signed-off-by: Jason St. John <jstjohn(a)purdue.edu> Signed-off-by: Allan McRae <allan(a)archlinux.org> commit 0c180cb7cc890fdf162f3624d3fbeb6af95d2557 Author: Dave Reisner <dreisner(a)archlinux.org> Date: Thu Oct 31 17:42:47 2013 -0400 version: fix formatting in file to RPM upstream This reverts a portion of 86eefc1a3a341. Signed-off-by: Dave Reisner <dreisner(a)archlinux.org> Signed-off-by: Allan McRae <allan(a)archlinux.org> commit fe824f87b9f1e40d88bd1a190a0bc1c80f2e91eb Author: Allan McRae <allan(a)archlinux.org> Date: Thu Oct 31 23:24:26 2013 +1000 makepkg: only remove static libraries if they have a shared version It is fairly common that packages contain static libraries with no shared counterpart. These should not be removed with !staticlibs. Signed-off-by: Allan McRae <allan(a)archlinux.org> commit 5c5b28833c0c47d31c58d40cd13b69227de6eb48 Author: Allan McRae <allan(a)archlinux.org> Date: Thu Oct 31 22:28:55 2013 +1000 makepkg: Allow "static library" to be translated Signed-off-by: Allan McRae <allan(a)archlinux.org> ----------------------------------------------------------------------- Summary of changes: HACKING | 4 +-- Makefile.am | 2 +- contrib/bacman.sh.in | 10 +++++-- contrib/checkupdates.sh.in | 13 +++++++-- contrib/paccache.sh.in | 24 +++++++-------- contrib/pacdiff.sh.in | 8 +++-- contrib/paclist.sh.in | 10 +++++-- contrib/paclog-pkglist.sh.in | 12 ++++++-- contrib/pacscripts.sh.in | 16 +++++----- contrib/pacsearch.in | 5 ++-- contrib/pacsysclean.sh.in | 8 +++-- contrib/rankmirrors.sh.in | 15 ++++++---- contrib/updpkgsums.sh.in | 18 +++++++----- doc/PKGBUILD.5.txt | 2 +- doc/index.txt | 16 +++++----- doc/makepkg.conf.5.txt | 2 +- lib/libalpm/add.c | 24 ++++++++++++++- lib/libalpm/alpm.h | 14 ++++----- lib/libalpm/be_package.c | 6 +++- lib/libalpm/deps.c | 4 +-- lib/libalpm/diskspace.c | 2 +- lib/libalpm/dload.c | 4 +-- lib/libalpm/filelist.c | 2 +- lib/libalpm/handle.c | 37 +++++++++++------------ lib/libalpm/handle.h | 10 +++---- lib/libalpm/remove.c | 9 ++++-- lib/libalpm/signing.c | 24 +++++++-------- lib/libalpm/trans.c | 2 +- lib/libalpm/util.c | 6 ++-- lib/libalpm/version.c | 42 +++++++++++++------------- scripts/makepkg.sh.in | 28 +++++++++++------- scripts/pacman-db-upgrade.sh.in | 7 +++-- scripts/pacman-optimize.sh.in | 6 ++-- scripts/pkgdelta.sh.in | 11 ++++--- src/common/util-common.c | 19 ++++++------ src/pacman/callback.c | 36 ++++------------------- src/pacman/conf.c | 6 ++-- src/pacman/package.c | 4 +-- src/pacman/pacman.c | 2 +- src/pacman/query.c | 2 +- src/pacman/sync.c | 2 +- src/pacman/util.c | 4 +-- test/scripts/human_to_size_test.sh | 56 +++++++++++++++++------------------ test/scripts/parseopts_test.sh | 60 +++++++++++++++++++------------------- test/util/pacsorttest.sh | 4 +-- test/util/vercmptest.sh | 2 +- 46 files changed, 327 insertions(+), 273 deletions(-) hooks/post-receive -- The official pacman repository

1 0