- Arch-projects - lists.archlinux.org

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository branch master updated. 2011.05.2-25-ga41c290
by tomegun＠archlinux.org 01 Jun '11

01 Jun '11

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The branch, master has been updated via a41c290180a5f7d0c7aa9eef2210956dd0a8bc63 (commit) via aac43067a13f1940f8f81f45142463e85ce21de2 (commit) via 017b5a689363aac54313b6e51d0da713f33787b7 (commit) from 268986e2d39a9ead28b8281fbbcbf79b6ec6c240 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit a41c290180a5f7d0c7aa9eef2210956dd0a8bc63 Merge: 017b5a6 aac4306 Author: Tom Gundersen <teg(a)jklm.no> Date: Wed Jun 1 01:56:48 2011 +0200 Merge branch 'snowman' Conflicts: rc.d Trivial conflict with dave's eval purge. Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit aac43067a13f1940f8f81f45142463e85ce21de2 Author: Eric Bélanger <snowmaniscool(a)gmail.com> Date: Thu May 26 22:07:23 2011 -0400 rc.d: Add error message when daemon script is not found Signed-off-by: Eric Bélanger <snowmaniscool(a)gmail.com> Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit 017b5a689363aac54313b6e51d0da713f33787b7 Author: Tom Gundersen <teg(a)jklm.no> Date: Tue May 31 10:24:12 2011 +0200 net: add examples Signed-off-by: Tom Gundersen <teg(a)jklm.no> ----------------------------------------------------------------------- Summary of changes: rc.conf | 11 +++++++++++ rc.d | 6 +++++- 2 files changed, 16 insertions(+), 1 deletions(-) hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] [initscripts] net: add examples
by Tom Gundersen 31 May '11

31 May '11

Dave, Does the below look correct to you? Cheers, Tom commit 017b5a689363aac54313b6e51d0da713f33787b7 Author: Tom Gundersen <teg(a)jklm.no> Date: Tue May 31 10:24:12 2011 +0200 net: add examples Signed-off-by: Tom Gundersen <teg(a)jklm.no> diff --git a/rc.conf b/rc.conf index 3c21d4e..534112f 100644 --- a/rc.conf +++ b/rc.conf @@ -71,6 +71,17 @@ HOSTNAME="myhost" # - netmask: subnet mask (ignored for DHCP) # - gateway: default route (ignored for DHCP) # +# Static IP example +# interface=eth0 +# address=192.168.0.2 +# netmask=255.255.255.0 +# gateway=192.168.0.1 +# +# DHCP example +# interface=eth0 +# address= +# netmask= +# gateway= interface= address=

1 0

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository branch master updated. 2011.05.2-22-g268986e
by tomegun＠archlinux.org 30 May '11

30 May '11

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The branch, master has been updated via 268986e2d39a9ead28b8281fbbcbf79b6ec6c240 (commit) via 2b188618291d537c0b5da8c3b84902e53436352a (commit) from 997f095bf69a4470189e1ccfc345f354899192d8 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 268986e2d39a9ead28b8281fbbcbf79b6ec6c240 Author: Tom Gundersen <teg(a)jklm.no> Date: Tue May 31 01:18:50 2011 +0200 depraction: MOD_AUTOLOAD and MODULES blacklisting Add comment to note that MOD_AUTOLOAD should always be "yes" and blacklisting is no longer supported in the MODULES array. Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit 2b188618291d537c0b5da8c3b84902e53436352a Author: Tom Gundersen <teg(a)jklm.no> Date: Tue May 31 01:11:23 2011 +0200 Revert "udev: generate blacklist on boot" This reverts commit 99d64f5789f01243903be4b32078ec38bdce75fa. We decided not to provide a compatibility layer, but rather require the user to create blacklist files in /etc/modprobe.d manually. Hence, this is no longer needed. The reason was that the compatibliy would not be 1-to-1, so it might be missleading to pretend that it was. Also, most people should not need the blacklisting in the first place. Conflicts: Makefile Signed-off-by: Tom Gundersen <teg(a)jklm.no> ----------------------------------------------------------------------- Summary of changes: Makefile | 5 ++--- modprobe-blacklist | 25 ------------------------- rc.conf | 10 +++++++--- rc.sysinit | 3 --- 4 files changed, 9 insertions(+), 34 deletions(-) delete mode 100755 modprobe-blacklist hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository branch master updated. 2011.05.2-20-g997f095
by tomegun＠archlinux.org 30 May '11

30 May '11

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The branch, master has been updated via 997f095bf69a4470189e1ccfc345f354899192d8 (commit) via a7627c6d0784ca169b14265744ce356a7d740f62 (commit) via d0340e988f96f38cfb518d88e1e6d6e8a3b1cf8c (commit) from dfdf8b683633d89a9c7c7560397c57a8a1594147 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 997f095bf69a4470189e1ccfc345f354899192d8 Author: Sebastien Luttringer <seblu(a)seblu.net> Date: Tue May 31 08:27:18 2011 +0200 rc.d: print usage if not enough argument Signed-off-by: Sebastien Luttringer <seblu(a)seblu.net> commit a7627c6d0784ca169b14265744ce356a7d740f62 Author: Sebastien Luttringer <seblu(a)seblu.net> Date: Tue May 31 08:25:28 2011 +0200 rc.d: Remove cd from the loop Signed-off-by: Sebastien Luttringer <seblu(a)seblu.net> commit d0340e988f96f38cfb518d88e1e6d6e8a3b1cf8c Author: Dave Reisner <d(a)falconindy.com> Date: Fri May 27 09:09:44 2011 -0400 rc.d: declare ENV as an array Signed-off-by: Dave Reisner <d(a)falconindy.com> Signed-off-by: Sebastien Luttringer <seblu(a)seblu.net> ----------------------------------------------------------------------- Summary of changes: rc.d | 15 +++++++++------ 1 files changed, 9 insertions(+), 6 deletions(-) hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] [PATCH] rc.d: declare ENV as an array
by Dave Reisner 27 May '11

27 May '11

Signed-off-by: Dave Reisner <d(a)falconindy.com> --- Sorry to sneak this in -- I should have noticed it earlier. This is simply a continuation of my crusade against eval, which would happily go to town with word splitting. As this conflicts with Eric's patch, one of us will need to refactor slightly. dave rc.d | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/rc.d b/rc.d index 55871b1..af29574 100755 --- a/rc.d +++ b/rc.d @@ -46,13 +46,13 @@ case $1 in shift # set same environment variables as init runlevel=$(/sbin/runlevel) - ENV="PATH='/bin:/usr/bin:/sbin:/usr/sbin'" - ENV+=" PREVLEVEL='${runlevel:0:1}'" - ENV+=" RUNLEVEL='${runlevel:2:1}'" - ENV+=" CONSOLE='${CONSOLE:-/dev/console}'" - ENV+=" TERM='${TERM}'" + ENV=("PATH=/bin:/usr/bin:/sbin:/usr/sbin" + "PREVLEVEL=${runlevel%% *}" + "RUNLEVEL=${runlevel##* }" + "CONSOLE=${CONSOLE:-/dev/console}" + "TERM=$TERM") for i; do - [[ -x "/etc/rc.d/$i" ]] && cd / && eval /usr/bin/env -i $ENV "/etc/rc.d/$i" "$action" + [[ -x "/etc/rc.d/$i" ]] && cd / && /usr/bin/env -i "${ENV[@]}" "/etc/rc.d/$i" "$action" (( ret += !! $? )) # clamp exit value to 0/1 done esac -- 1.7.5.2

2 1

[arch-projects] [initscripts][PATCH] rc.d: Add error message when daemon script is not found
by Eric Bélanger 27 May '11

27 May '11

Signed-off-by: Eric Bélanger <snowmaniscool(a)gmail.com> --- rc.d | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletions(-) diff --git a/rc.d b/rc.d index 55871b1..97f266a 100755 --- a/rc.d +++ b/rc.d @@ -52,7 +52,12 @@ case $1 in ENV+=" CONSOLE='${CONSOLE:-/dev/console}'" ENV+=" TERM='${TERM}'" for i; do - [[ -x "/etc/rc.d/$i" ]] && cd / && eval /usr/bin/env -i $ENV "/etc/rc.d/$i" "$action" + if [[ -x "/etc/rc.d/$i" ]]; then + cd / + eval /usr/bin/env -i $ENV "/etc/rc.d/$i" "$action" + else + printf "${C_OTHER}:: ${C_FAIL}Error: ${C_DONE}Daemon script $i does not exist.\n" + fi (( ret += !! $? )) # clamp exit value to 0/1 done esac -- 1.7.5.2

2 1

[arch-projects] [initscripts][mkinitcpio][module-init-tools][udev] dropping load-modules.sh
by Tom Gundersen 24 May '11

24 May '11

Hi guys, I have been working on the remaining bits before we can drop our load-modules.sh from udev. I asked around on #udev to see what they thought of moving some of our functionality upstream. Kay Sievers rightly pointed out that the functionality belongs in module-init-tools, not in udev. I made a few patches against module-init-tools which simplifies what we have to do in initscripts/mkinitcpio, and I'd like to ask your opinion about this before submitting upstream. Kernel commandline blacklisting: modprobe will parse /proc/kcmdline in addition to the configuration files to blacklist modules. The syntax is "modprobe.blacklist=mod1,mod2,mod3". rc.conf blacklist compatibility: This is only relevant for initscripts. modprobe will read /run/modprobe.d in addition to /etc/modprobe.d for configuration files, so at boot we can generate a blacklist file directly in /run based on rc.conf. I'm still working on some improvements to this patch that are needed before it can be upstreamed (if two files with the same name exist in different directories one needs to be ignored), but the functionality we care about is already there. Any comments? Does this sound like enough to remove the blacklisting logic provided by modules-load.sh? For an idea of what initscripts will do at boot once this is in modules-init-tools, have a look here: <https://github.com/teg/initscripts-arch/blob/ccac6d93278fe4ce2e8cbf9923c089…>. Cheers, Tom

1 0

[arch-projects] [PATCH 0/2] iproute2 migration
by Dave Reisner 24 May '11

24 May '11

I'm resubmitting my work of migrating to iproute2 from net-tools at Tom's request. It's pretty much the same, but with the feedback from Dan, I've added some extremely simple deprecation logic to yell at the user when he or she is still using the net-tools variables. The new logic uses some fairly simple (and generic) declarations: interface, address, netmask, and gateway. If interface is undefined, we fire off the deprecation warning, as this is the _only_ variable required to establish a connection via iproute2. If address is undefined, we skip reading netmask and gateway, and assume usage of dhcp. If address _is_ defined, we assert the need for gateway and netmask. I've opted to make this warning fairly common, firing it both on bringing up, and bringing down interfaces, as I think this needs to be made very clear, given the severity of the change. Along with this change, we would need to do a little bit of juggling with coreutils and yp-tools in order to make net-tools truly optional: - coreutils is currently built without hostname. enable this, removing it from net-tools. - yp-tools is currently in extra. we would need to bring this into core in order to support setting a domainname, and remove the symlinks to hostname from the net-tools package. As always, comments, criticisms, and tomatoes are welcome. dave

5 14

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository branch master updated. 2011.05.2-17-gdfdf8b6
by tomegun＠archlinux.org 24 May '11

24 May '11

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The branch, master has been updated via dfdf8b683633d89a9c7c7560397c57a8a1594147 (commit) via 18adeacb36967463330060237725ffbdfd47e2a7 (commit) via a3314c769768d8c40b46767d26f9783d4f359358 (commit) via 395803ff628e41940bbaaf5f1ffbcf591b007102 (commit) via d543c7aa098c214fa5e55a497353dda47b95d3ad (commit) via d4d9f1f97f0fbf798eafbb5c1c1976c342605eb5 (commit) via 1ba11e7f78af5742dbc211d9202db4549558ca44 (commit) via d1be877eb0ad3be634cee08aada8f8d1265023a4 (commit) via 9888b262c2deb32064b30eb637ece9e424356777 (commit) from 68c61ed4ce2eddf29c4f047133406d72162fd396 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit dfdf8b683633d89a9c7c7560397c57a8a1594147 Merge: a3314c7 18adeac Author: Tom Gundersen <teg(a)jklm.no> Date: Mon May 23 01:31:48 2011 +0200 Merge remote-tracking branch 'seblu/master' commit 18adeacb36967463330060237725ffbdfd47e2a7 Author: Sebastien Luttringer <seblu(a)seblu.net> Date: Mon May 23 01:13:57 2011 +0200 rc.d zsh completion detect running daemons This patch adds functionalities of bash completions about running demons Signed-off-by: Sebastien Luttringer <seblu(a)seblu.net> commit a3314c769768d8c40b46767d26f9783d4f359358 Author: Dave Reisner <d(a)falconindy.com> Date: Thu Apr 28 22:42:11 2011 -0400 network: deprecate net-tools, add iproute2 support Provide large warnings when net-tools functionality is used. Add documentation in rc.conf for the new iproute2 based config. Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit 395803ff628e41940bbaaf5f1ffbcf591b007102 Author: Clément Démoulins <clement(a)archivel.fr> Date: Wed May 18 22:16:02 2011 +0200 Add a zsh completion script for the command rc.d. seblu: Fix typo, add vim modeline Signed-off-by: Sebastien Luttringer <seblu(a)seblu.net> commit d543c7aa098c214fa5e55a497353dda47b95d3ad Author: Sebastien Luttringer <seblu(a)seblu.net> Date: Sat May 21 21:12:28 2011 +0200 rc.d bash completion detect running daemon This patch adds sexy features from Auguste Pop bash completion patch. Mainly, detect if a daemon is running and complete accordingly Signed-off-by: Sebastien Luttringer <seblu(a)seblu.net> commit d4d9f1f97f0fbf798eafbb5c1c1976c342605eb5 Author: Sebastien Luttringer <seblu(a)seblu.net> Date: Thu May 5 02:50:11 2011 +0200 Add rc.d bash completion Signed-off-by: Sebastien Luttringer <seblu(a)seblu.net> commit 1ba11e7f78af5742dbc211d9202db4549558ca44 Author: Sebastien Luttringer <seblu(a)seblu.net> Date: Wed May 4 23:35:25 2011 +0200 Improve coloring on light and transparent term This patch improve coloring in light and transparent term. It uses tput if available or default color code. It remplace \033 by \e. It's a kind of rollback from commit 65f410, because initscripts are now in bash, and argument "\e isn't recongized in all shells" is not an issue anymore. This is not done in locale.sh script which can be sourced by others shell, so we try to be the more compliant as possible Signed-off-by: Sebastien Luttringer <seblu(a)seblu.net> commit d1be877eb0ad3be634cee08aada8f8d1265023a4 Author: Sebastien Luttringer <seblu(a)seblu.net> Date: Thu May 5 01:42:07 2011 +0200 Add TERM var to rc.d cleaned env We need to do this to allow a correct detection of terminal colors in functions sourced by rc.d scripts Signed-off-by: Sebastien Luttringer <seblu(a)seblu.net> commit 9888b262c2deb32064b30eb637ece9e424356777 Author: Sebastien Luttringer <seblu(a)seblu.net> Date: Thu May 5 01:26:44 2011 +0200 Add syntax to vim modeline in rc.d script With new name of script, vim doesn't reconize correctly file format. We need to set it explicitly. Signed-off-by: Sebastien Luttringer <seblu(a)seblu.net> ----------------------------------------------------------------------- Summary of changes: Makefile | 4 +- PKGBUILD | 7 ++- bash-completion | 22 ++++++++++ functions | 47 +++++++++++++--------- network | 118 ++++++++++++++++++++++++++++++++++++++++-------------- rc.conf | 40 +++++-------------- rc.d | 3 +- rc.sysinit | 6 +- zsh-completion | 37 +++++++++++++++++ 9 files changed, 196 insertions(+), 88 deletions(-) create mode 100644 bash-completion create mode 100644 zsh-completion hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] [netcfg] doing a netcfg release ?
by Rémy Oudompheng 22 May '11

22 May '11

Hello, I see the current netcfg release is more than a year old. It seems wise to do a new release with the current state of the git repository, which has accumulated several patches over time. If nobody objects, I can write some release notes and do the packaging. Regards, Rémy.

4 4