- Arch-dev-public - lists.archlinux.org

[arch-dev-public] [signoff] util-linux 2.19-3
by Ionuț Bîru 23 Feb '11

23 Feb '11

Hi, The util-linux-ng project has been renamed back to util-linux. Release highlights ------------------ lsblk(8): - this NEW COMMAND lists information about all or selected block devices in tree-like format. partx(8): - this command has been rewritten to use libblkid for partition tables parsing. It supports aix, bsd, dos, gpt, mac, minix, sgi, solaris_x86, sun, ultrix and unixware now. - supports new command line option "--show" to list partitions in new format - prints UUID and name for GPT and mac partitions findmnt(8): - supports new command line option "--submounts" to list all submounts for selected mountpoint(s) agetty(8): - supports new command line options "-c" and "-s" to reuse already initialized tty cflags and existing baud rate mount(8), umount(8): - could be linked with libmount (--enable-libmount-mount) to manage userspace mount options outside /etc/mtab on systems where the file is a symlink to /proc/mounts. (EXPERIMENTAL) losetup(8), mount(8): - uses /sys/dev/block/<device>/loop/backing_file rather than loopdev ioctls (requires kernel >= 2.6.37) fsck(8): - supports new command line option "-l" to lock whole-disk device by exclusive flock(2). This option is recommended when more fsck(8) instances are executed in the same time. rtcwake(8): - supports new mode "show" to print the current RTC alarm time fstrim(8): - this NEW COMMAND allows to discard unused blocks on a mounted filesystem (wrapper for FITRIM ioctl) swapon(8): - supports new options "discard" and "nofail" blkid(8): - low-level probing (-p) returns "8" exit code for ambivalent probing results libmount: - include file has been renamed from mount/mount.h to libmount/libmount.h For a complete list of changes see docs/v2.19-ReleaseNotes Packaging differences between util-linux-ng 2.18: * removing the .install because ipc.texi (info with IPC API docs) was removed from the source * --enable-rdev deprecated * tpowa changes --enable-libmount-mount link mount(8) with libmount (EXPERIMENTAL) -- Ionuț

5 8

Re: [arch-dev-public] soprano rebuild for raptor/rasqal/redland
by Andrea Scarpino 22 Feb '11

22 Feb '11

On Tuesday 22 February 2011 19:28:34 Andrea Scarpino wrote: > It loses the RedLand backend which is needed for the Nepomuk integration. Oh, I forgot to say that isn't the only one backend, neither is the default. We could disable it and when KDE 4.6.1 will be out 1st March, I could write an announcment to say the RedLand backend is no more supported by soprano in our repo. -- Andrea

1 0

[arch-dev-public] soprano rebuild for raptor/rasqal/redland
by Andreas Radke 22 Feb '11

22 Feb '11

I've updated soprano in trunk to make it build against the new versions in staging. It compiles but I'm not sure if it works. Can a kde maintainer please test the soprano rebuild with locally installed packages raptor1/raptor/rasqal/raptor from staging? They way I've got soprano built looses a backend. Not sure if this is important for its usage: [andyrtr@workstation64 trunk]$ checkpkg --- filelist-soprano-old 2011-02-22 17:50:41.642210381 +0100 +++ filelist-soprano 2011-02-22 17:50:41.642210381 +0100 @@ -180,7 +180,6 @@ usr/lib/soprano/libsoprano_nquadserializer.so usr/lib/soprano/libsoprano_raptorparser.so usr/lib/soprano/libsoprano_raptorserializer.so -usr/lib/soprano/libsoprano_redlandbackend.so usr/lib/soprano/libsoprano_sesame2backend.so usr/lib/soprano/libsoprano_virtuosobackend.so usr/share/ @@ -199,7 +198,6 @@ usr/share/soprano/plugins/nquadserializer.desktop usr/share/soprano/plugins/raptorparser.desktop usr/share/soprano/plugins/raptorserializer.desktop -usr/share/soprano/plugins/redlandbackend.desktop usr/share/soprano/plugins/sesame2backend.desktop usr/share/soprano/plugins/virtuosobackend.desktop usr/share/soprano/rules/ It's the last missing rebuild to move raptor/rasqal/redland to testing. -Andy

2 1

[arch-dev-public] Do not use leading / in .install files
by Allan McRae 22 Feb '11

22 Feb '11

Just a reminder that file paths should not use leading /'s in .install files. e.g. infodir=/usr/share/info should be : infodir=usr/share/info Allan

1 0

[arch-dev-public] python 3.2 rebuild
by Stéphane Gaudreault 21 Feb '11

21 Feb '11

Version 3.2 of python is now available (formal announcement on the python.org frontpage should be published in the next hours). Thankfully this rebuild will be a much smaller than the recent one for 2.7.1. It is a fairly small rebuild with 9 pkgs from [extra] and 18 from [community]. I am ready to upload the new package into staging so rebuilds can start after. I tested [extra] package rebuild with the "rc" releases and Fedora ran their development tree with python 3.2rc{1,2,3} for several weeks, so I do not expect problems with the final release. If there is no objection, I will start the rebuild into staging tomorrow morning. Important changes are listed here : http://docs.python.org/dev/whatsnew/3.2.html There is a new bytecode format and the layout of how Python stores cached bytecode has changed somewhat. The full details can be seen at: http://www.python.org/dev/peps/pep-3147/ To summarize, where before we had: foo/__init__.py foo/__init__.pyc foo/__init__.pyo foo/bar.py foo/bar.pyo foo/bar.pyo foo/foo.py foo/foo.pyc foo/foo.pyo with Python 3.2 we now have a __pycache__ directory: foo/__init__.py foo/bar.py foo/foo.py foo/__pycache__/ foo/__pycache__/__init__.cpython-32.pyc foo/__pycache__/__init__.cpython-32.pyo foo/__pycache__/foo.cpython-32.pyc foo/__pycache__/foo.cpython-32.pyo foo/__pycache__/bar.cpython-32.pyc foo/__pycache__/bar.cpython-32.pyo The 32 in the above filenames refers explicitely to the python version, not the architecture. When rebuilding, we will need to make sure that rebuilded packages contains directories like foo/__pycache__ to capture the directory and the bytecode files within. As the .pyo files are architecture independent. I think we should make sure to build them, i.e add --optimize=1 in the install line like this : python setup.py install --root="$pkgdir" --optimize=1 Stéphane

1 1

[arch-dev-public] [signoff] wget-1.12-5
by Allan McRae 21 Feb '11

21 Feb '11

Do not overwrite /etc/wgetrc when "adding" lines to it. Signoff both, Allan

3 2

[arch-dev-public] [signoff] wget 1.12.2-4
by Ángel Velásquez 21 Feb '11

21 Feb '11

Hi I've rebuilt wget with support for ssl and certificates, please see FS#21650 Please signoff -- Angel Velásquez angvp @ irc.freenode.net Arch Linux Developer / Trusted User Linux Counter: #359909 http://www.angvp.com

4 3

[arch-dev-public] [signoff] shadow-4.1.4.2-4
by Ionuț Bîru 21 Feb '11

21 Feb '11

Hi, implemented FS#21391. is needed because > consolekit 0.4.2 changed the default policy and expects that a third party to authorize the user. That works out of the box with graphically login managers as GDM/KDM/LXDM. Note that ck-launch-session hack is still needed in ~/.xinitrc. Tested with gnome and xfce and mounting/reboot/shutdown works. exec ck-launch-session gnome-session exec ck-launch-session xfce-session -- Ionuț

4 3

[arch-dev-public] [signoff] glibc-2.13-4
by Allan McRae 21 Feb '11

21 Feb '11

Fix issues with prelink (FS#22656) Signoff both, Allan

4 4

[arch-dev-public] [PATCH] checkpkg: protect expression with single quote
by Stéphane Gaudreault 21 Feb '11

21 Feb '11

I needed to quote the grep expression to avoid error like usr/lib/python3.2/encodings/iso2022_jp_1.py: objdump: usr/lib/python3.2/encodings/iso2022_jp_1.py: File format not recognized --- checkpkg 2011-01-08 11:35:59.000000000 -0500 +++ checkpkg 2011-02-20 19:01:13.853333510 -0500 @@ -88,7 +88,7 @@ mkdir -p pkg cd pkg bsdtar xf ../"$pkgfile" > /dev/null - for i in `diff ../filelist-$_pkgname-old ../filelist-$_pkgname | grep \> | grep \.so | awk '{print $2}'`; do + for i in `diff ../filelist-$_pkgname-old ../filelist-$_pkgname | grep \> | grep '\.so' | awk '{print $2}'`; do echo -n "${i}: " objdump -p $i | grep SONAME done

2 1