November 2023 - Arch-general - lists.archlinux.org

Can't connect to a 5GHz WiFi network
by Sadeep Madurange 16 Nov '23

16 Nov '23

Greeting everyone, Since this Tuesday, my Arch machine, a ThinkPad T490, can't connect to a specific 5GHz WiFi network called gcat. The network is working fine because my work laptop, a ThinkPad X1 also running Arch, and my Android phone both connect to gcat just fine. Also, I can connect to a 2.4GHz network from the same access point. I don't think this is a problem with 5GHz networks. When I create a 5GHz hotspot with my mobile phone, this machine connects to it successfully. Initially, I couldn't see gcat in wifi-menu. So, I deleted the netctl profile for gcat and restarted the machine, after which I saw gcat again in wifi-menu. When I enter the password, wifi-menu tells me that it failed to connect to gcat. The netctl profile: Description='Automatically generated profile by wifi-menu' Interface=wlp0s20f3 Connection=wireless Security=wpa ESSID=gcat IP=dhcp Key=*** Following is the output of dmesg | grep iwlwifi: [ 9.081448] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) [ 9.090125] iwlwifi 0000:00:14.3: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000 [ 9.090148] iwlwifi 0000:00:14.3: PCI dev 02f0/0074, rev=0x351, rfid=0x10a100 [ 9.104916] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver [ 9.104934] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37 [ 9.105939] iwlwifi 0000:00:14.3: loaded firmware version 77.bd067429.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm [ 9.754739] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351 [ 9.877459] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100 [ 9.943639] iwlwifi 0000:00:14.3: base HW address: d8:3b:bf:b5:ea:b9 [ 9.965714] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0 [ 51.059576] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 1 Following is the result of journalctl | grep gcat: Nov 16 09:21:28 asciimx network[544]: Profile 'wlp0s20f3-gcat' does not exist or is not readable Nov 16 09:21:28 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Main process exited, code=exited, status=1/FAILURE Nov 16 09:21:28 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Failed with result 'exit-code'. Nov 16 09:22:09 asciimx network[809]: Starting network profile 'wlp0s20f3-gcat'... Nov 16 09:22:25 asciimx network[809]: Failed to bring the network up for profile 'wlp0s20f3-gcat' Nov 16 09:22:25 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Main process exited, code=exited, status=1/FAILURE Nov 16 09:22:25 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Failed with result 'exit-code'. Nov 16 09:22:25 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Consumed 1.510s CPU time. Nov 16 10:46:58 asciimx network[538]: Profile 'wlp0s20f3-gcat' does not exist or is not readable Nov 16 10:46:58 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Main process exited, code=exited, status=1/FAILURE Nov 16 10:46:58 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Failed with result 'exit-code'. Nov 16 14:49:34 asciimx network[512]: Profile 'wlp0s20f3-gcat' does not exist or is not readable Nov 16 14:49:34 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Main process exited, code=exited, status=1/FAILURE Nov 16 14:49:34 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Failed with result 'exit-code'. Nov 16 14:50:45 asciimx network[809]: Starting network profile 'wlp0s20f3-gcat'... Nov 16 14:51:01 asciimx network[809]: Failed to bring the network up for profile 'wlp0s20f3-gcat' Nov 16 14:51:01 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Main process exited, code=exited, status=1/FAILURE Nov 16 14:51:01 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Failed with result 'exit-code'. Nov 16 14:51:01 asciimx systemd[1]: netctl(a)wlp0s20f3\x2dgcat.service: Consumed 1.016s CPU time. Following is the output of iw list: Wiphy phy0 wiphy index: 0 max # scan SSIDs: 20 max scan IEs length: 365 bytes max # sched scan SSIDs: 20 max # match sets: 8 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports RSN-IBSS. Device supports AP-side u-APSD. Device supports T-DLS. Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP-128 (00-0f-ac:4) * GCMP-128 (00-0f-ac:8) * GCMP-256 (00-0f-ac:9) * CMAC (00-0f-ac:6) * GMAC-128 (00-0f-ac:11) * GMAC-256 (00-0f-ac:12) Available Antennas: TX 0x3 RX 0x3 Configured Antennas: TX 0x3 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * monitor * P2P-client * P2P-GO * P2P-device Band 1: Capabilities: 0x19ef RX LDPC HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 4 usec (0x05) HT Max RX data rate: 300 Mbps HT TX/RX MCS rate indexes supported: 0-15 HE Iftypes: managed HE MAC Capabilities (0x78019a30abc0): +HTC HE Supported Trigger Frame MAC Padding Duration: 2 Multi-TID Aggregation Support: 7 Broadcast TWT 32-bit BA Bitmap OM Control Maximum A-MPDU Length Exponent: 3 RX Control Frame to MultiBSS A-MSDU in A-MPDU Multi-TID Aggregation TX: 7 UL 2x996-Tone RU HE PHY Capabilities: (0x023f0e09fd098c160ff001): HE40/2.4GHz Punctured Preamble RX: 15 Device Class: 1 LDPC Coding in Payload NDP with 4x HE-LTF and 3.2us GI STBC Tx <= 80MHz STBC Rx <= 80MHz DCM Max Constellation: 1 DCM Max Constellation Rx: 1 SU Beamformee Beamformee STS <= 80Mhz: 7 Beamformee STS > 80Mhz: 7 Sounding Dimensions <= 80Mhz: 1 Sounding Dimensions > 80Mhz: 1 Triggered SU Beamforming Feedback Triggered MU Beamforming Feedback PPE Threshold Present Power Boost Factor ar HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI Max NC: 2 HE ER SU PPDU 4x HE-LTF 0.8us GI 20MHz in 40MHz HE PPDU 2.4GHz 20MHz in 160/80+80MHz HE PPDU 80MHz in 160/80+80MHz HE PPDU RX Full BW SU Using HE MU PPDU with Compression SIGB RX Full BW SU Using HE MU PPDU with Non-Compression SIGB HE RX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE TX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported PPE Threshold 0x61 0x1c 0xc7 0x71 EHT Iftypes: managed EHT MAC Capabilities (0x0000): EHT PHY Capabilities: (0x0000000000000000): EHT MCS/NSS: (0x): EHT bw=20 MHz, max NSS for MCS 0-7: Rx=0, Tx=0 EHT bw=20 MHz, max NSS for MCS 8-9: Rx=0, Tx=0 EHT bw=20 MHz, max NSS for MCS 10-11: Rx=0, Tx=0 EHT bw=20 MHz, max NSS for MCS 12-13: Rx=0, Tx=0 HE Iftypes: AP HE MAC Capabilities (0x78011a100000): +HTC HE Supported Trigger Frame MAC Padding Duration: 2 Multi-TID Aggregation Support: 7 Broadcast TWT OM Control Maximum A-MPDU Length Exponent: 3 HE PHY Capabilities: (0x02200e090009800401c000): HE40/2.4GHz LDPC Coding in Payload NDP with 4x HE-LTF and 3.2us GI STBC Tx <= 80MHz STBC Rx <= 80MHz DCM Max Constellation: 1 DCM Max Constellation Rx: 1 Sounding Dimensions <= 80Mhz: 1 Sounding Dimensions > 80Mhz: 1 PPE Threshold Present HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI HE ER SU PPDU 4x HE-LTF 0.8us GI HE RX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE TX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported PPE Threshold 0x61 0x1c 0xc7 0x71 EHT Iftypes: AP EHT MAC Capabilities (0x0000): EHT PHY Capabilities: (0x0000000000000000): EHT MCS/NSS: (0x): EHT bw=20 MHz, max NSS for MCS 0-7: Rx=0, Tx=0 EHT bw=20 MHz, max NSS for MCS 8-9: Rx=0, Tx=0 EHT bw=20 MHz, max NSS for MCS 10-11: Rx=0, Tx=0 EHT bw=20 MHz, max NSS for MCS 12-13: Rx=0, Tx=0 Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Frequencies: * 2412 MHz [1] (22.0 dBm) * 2417 MHz [2] (22.0 dBm) * 2422 MHz [3] (22.0 dBm) * 2427 MHz [4] (22.0 dBm) * 2432 MHz [5] (22.0 dBm) * 2437 MHz [6] (22.0 dBm) * 2442 MHz [7] (22.0 dBm) * 2447 MHz [8] (22.0 dBm) * 2452 MHz [9] (22.0 dBm) * 2457 MHz [10] (22.0 dBm) * 2462 MHz [11] (22.0 dBm) * 2467 MHz [12] (22.0 dBm) * 2472 MHz [13] (22.0 dBm) * 2484 MHz [14] (disabled) Band 2: Capabilities: 0x19ef RX LDPC HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 4 usec (0x05) HT Max RX data rate: 300 Mbps HT TX/RX MCS rate indexes supported: 0-15 VHT Capabilities (0x039071f6): Max MPDU length: 11454 Supported Channel Width: 160 MHz RX LDPC short GI (80 MHz) short GI (160/80+80 MHz) TX STBC SU Beamformee MU Beamformee VHT RX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT RX highest supported: 0 Mbps VHT TX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT TX highest supported: 0 Mbps VHT extended NSS: supported HE Iftypes: managed HE MAC Capabilities (0x78018a30abc0): +HTC HE Supported Trigger Frame MAC Padding Duration: 2 Multi-TID Aggregation Support: 7 Broadcast TWT 32-bit BA Bitmap OM Control Maximum A-MPDU Length Exponent: 1 RX Control Frame to MultiBSS A-MSDU in A-MPDU Multi-TID Aggregation TX: 7 UL 2x996-Tone RU HE PHY Capabilities: (0x0c3f0e09fd098c160ff001): HE40/HE80/5GHz HE160/5GHz Punctured Preamble RX: 15 Device Class: 1 LDPC Coding in Payload NDP with 4x HE-LTF and 3.2us GI STBC Tx <= 80MHz STBC Rx <= 80MHz DCM Max Constellation: 1 DCM Max Constellation Rx: 1 SU Beamformee Beamformee STS <= 80Mhz: 7 Beamformee STS > 80Mhz: 7 Sounding Dimensions <= 80Mhz: 1 Sounding Dimensions > 80Mhz: 1 Triggered SU Beamforming Feedback Triggered MU Beamforming Feedback PPE Threshold Present Power Boost Factor ar HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI Max NC: 2 HE ER SU PPDU 4x HE-LTF 0.8us GI 20MHz in 40MHz HE PPDU 2.4GHz 20MHz in 160/80+80MHz HE PPDU 80MHz in 160/80+80MHz HE PPDU RX Full BW SU Using HE MU PPDU with Compression SIGB RX Full BW SU Using HE MU PPDU with Non-Compression SIGB HE RX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE TX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE RX MCS and NSS set 160 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE TX MCS and NSS set 160 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported PPE Threshold 0x61 0x1c 0xc7 0x71 EHT Iftypes: managed EHT MAC Capabilities (0x0000): EHT PHY Capabilities: (0x0000000000000000): EHT MCS/NSS: (0x): EHT bw <= 80 MHz, max NSS for MCS 8-9: Rx=0, Tx=0 EHT bw <= 80 MHz, max NSS for MCS 10-11: Rx=0, Tx=0 EHT bw <= 80 MHz, max NSS for MCS 12-13: Rx=0, Tx=0 EHT bw=160 MHz, max NSS for MCS 8-9: Rx=0, Tx=0 EHT bw=160 MHz, max NSS for MCS 10-11: Rx=0, Tx=0 EHT bw=160 MHz, max NSS for MCS 12-13: Rx=0, Tx=0 HE Iftypes: AP HE MAC Capabilities (0x78010a100000): +HTC HE Supported Trigger Frame MAC Padding Duration: 2 Multi-TID Aggregation Support: 7 Broadcast TWT OM Control Maximum A-MPDU Length Exponent: 1 HE PHY Capabilities: (0x0c200e090009800401c000): HE40/HE80/5GHz HE160/5GHz LDPC Coding in Payload NDP with 4x HE-LTF and 3.2us GI STBC Tx <= 80MHz STBC Rx <= 80MHz DCM Max Constellation: 1 DCM Max Constellation Rx: 1 Sounding Dimensions <= 80Mhz: 1 Sounding Dimensions > 80Mhz: 1 PPE Threshold Present HE SU PPDU & HE PPDU 4x HE-LTF 0.8us GI HE ER SU PPDU 4x HE-LTF 0.8us GI HE RX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE TX MCS and NSS set <= 80 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE RX MCS and NSS set 160 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported HE TX MCS and NSS set 160 MHz 1 streams: MCS 0-11 2 streams: MCS 0-11 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported PPE Threshold 0x61 0x1c 0xc7 0x71 EHT Iftypes: AP EHT MAC Capabilities (0x0000): EHT PHY Capabilities: (0x0000000000000000): EHT MCS/NSS: (0x): EHT bw <= 80 MHz, max NSS for MCS 8-9: Rx=0, Tx=0 EHT bw <= 80 MHz, max NSS for MCS 10-11: Rx=0, Tx=0 EHT bw <= 80 MHz, max NSS for MCS 12-13: Rx=0, Tx=0 EHT bw=160 MHz, max NSS for MCS 8-9: Rx=0, Tx=0 EHT bw=160 MHz, max NSS for MCS 10-11: Rx=0, Tx=0 EHT bw=160 MHz, max NSS for MCS 12-13: Rx=0, Tx=0 Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Frequencies: * 5180 MHz [36] (disabled) * 5200 MHz [40] (disabled) * 5220 MHz [44] (disabled) * 5240 MHz [48] (disabled) * 5260 MHz [52] (disabled) * 5280 MHz [56] (disabled) * 5300 MHz [60] (disabled) * 5320 MHz [64] (disabled) * 5340 MHz [68] (disabled) * 5360 MHz [72] (disabled) * 5380 MHz [76] (disabled) * 5400 MHz [80] (disabled) * 5420 MHz [84] (disabled) * 5440 MHz [88] (disabled) * 5460 MHz [92] (disabled) * 5480 MHz [96] (disabled) * 5500 MHz [100] (disabled) * 5520 MHz [104] (disabled) * 5540 MHz [108] (disabled) * 5560 MHz [112] (disabled) * 5580 MHz [116] (disabled) * 5600 MHz [120] (disabled) * 5620 MHz [124] (disabled) * 5640 MHz [128] (disabled) * 5660 MHz [132] (disabled) * 5680 MHz [136] (disabled) * 5700 MHz [140] (disabled) * 5720 MHz [144] (disabled) * 5745 MHz [149] (22.0 dBm) * 5765 MHz [153] (22.0 dBm) * 5785 MHz [157] (22.0 dBm) * 5805 MHz [161] (22.0 dBm) * 5825 MHz [165] (disabled) * 5845 MHz [169] (disabled) * 5865 MHz [173] (disabled) * 5885 MHz [177] (disabled) * 5905 MHz [181] (disabled) Supported commands: * new_interface * set_interface * new_key * start_ap * new_station * new_mpath * set_mesh_config * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * frame * frame_wait_cancel * set_wiphy_netns * set_channel * tdls_mgmt * tdls_oper * start_sched_scan * probe_client * set_noack_map * register_beacons * start_p2p_device * set_mcast_rate * connect * disconnect * channel_switch * set_qos_map * add_tx_ts * set_multicast_to_unicast WoWLAN support: * wake up on disconnect * wake up on magic packet * wake up on pattern match, up to 20 patterns of 16-128 bytes, maximum packet offset 0 bytes * can do GTK rekeying * wake up on GTK rekey failure * wake up on EAP identity request * wake up on 4-way handshake * wake up on rfkill release * wake up on network detection, up to 8 match sets software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1, total <= 3, #channels <= 2 HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS. Device supports SAE with AUTHENTICATE command Device supports low priority scan. Device supports scan flush. Device supports per-vif TX power setting P2P GO supports CT window setting P2P GO supports opportunistic powersave setting Driver supports full state transitions for AP/GO clients Driver supports a userspace MPM Driver/device bandwidth changes during BSS lifetime (AP/GO mode) Device adds DS IE to probe requests Device can update TPC Report IE Device supports static SMPS Device supports dynamic SMPS Device supports WMM-AC admission (TSPECs) Device supports configuring vdev MAC-addr on create. Device supports randomizing MAC-addr in scans. Device supports randomizing MAC-addr in sched scans. Device supports randomizing MAC-addr in net-detect scans. max # scan plans: 2 max scan plan interval: 65535 max scan plan iterations: 254 Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xb0 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * P2P-device: 0x40 0xd0 Supported extended features: * [ VHT_IBSS ]: VHT-IBSS * [ RRM ]: RRM * [ MU_MIMO_AIR_SNIFFER ]: MU-MIMO sniffer * [ SCAN_START_TIME ]: scan start timestamp * [ BSS_PARENT_TSF ]: BSS last beacon/probe TSF * [ BEACON_RATE_LEGACY ]: legacy beacon rate setting * [ FILS_STA ]: STA FILS (Fast Initial Link Setup) * [ FILS_MAX_CHANNEL_TIME ]: FILS max channel attribute override with dwell time * [ ACCEPT_BCAST_PROBE_RESP ]: accepts broadcast probe response * [ OCE_PROBE_REQ_HIGH_TX_RATE ]: probe request TX at high rate (at least 5.5Mbps) * [ CONTROL_PORT_OVER_NL80211 ]: control port over nl80211 * [ TXQS ]: FQ-CoDel-enabled intermediate TXQs * [ SCAN_MIN_PREQ_CONTENT ]: use probe request with only rate IEs in scans * [ ENABLE_FTM_RESPONDER ]: enable FTM (Fine Time Measurement) responder * [ CONTROL_PORT_NO_PREAUTH ]: disable pre-auth over nl80211 control port support * [ PROTECTED_TWT ]: protected Target Wake Time (TWT) support * [ DEL_IBSS_STA ]: deletion of IBSS station support * [ SCAN_FREQ_KHZ ]: scan on kHz frequency support * [ CONTROL_PORT_OVER_NL80211_TX_STATUS ]: tx status for nl80211 control port support Appreciate any help! -- Regards, Sadeep PGP: 103BF9E3E750BF7E

4 13

"xrefactory" AUR-package submission request to "extra" repository
by Sergei Litvin 15 Nov '23

15 Nov '23

Good afternoon, I propose to add the following AUR-package, which I currently maintain, to the “extra” repository: https://aur.archlinux.org/packages/xrefactory It is a code browser tool, similar to the following tools, but more precise because it works on grammar level: https://archlinux.org/packages/extra/x86_64/cscope/ https://archlinux.org/packages/extra/x86_64/ctags/ https://archlinux.org/packages/extra/x86_64/global/ The "upstream" is no longer maintained, but I have learned the internals and have already made about 30 patches. So, I can fix possible bugs, including parsing C, YACC and Java grammar. This tool could be useful for Linux kernel developers (personally I use it along with cscope). And perhaps if it was in the "extra" repository, it could increase user interest in it. Best regards, Sergei Litvin Tel: +49 176 85283820

2 1

pacman via pacstrap
by lacsaP Patatetom 14 Nov '23

14 Nov '23

hi, I use `pacstrap -U` to install locally forged packages in a dedicated folder. this dedicated folder already contains some files and some of these files are causing problems for `pacstrap -U` (eg. `pacman -U`). i'd like to be able to use `--overwrite` option and pass it from `pacstrap`. is it possible to pass options to `pacman` via `pacstrap` ? regards, lacsaP.

4 7

Re: Bugtracker Migration to GitLab [to arch-general]
by David C. Rankin 14 Nov '23

14 Nov '23

On 11/9/23 17:08, Levente Polyak wrote: > ## Scope > > Our primary goal is to migrate bugs.archlinux.org to GitLab, focusing on > packaging bugs and our internal projects. In this email, we'll outline the > workflow for packaging bugs and seek your assistance in testing the migration > and the bug bot in the [test migration > group](https://gitlab.archlinux.org/groups/flyspray-migration/packaging/pac…. > > Please pay attention to the relevant paragraphs and everyone is strongly > encouraged to conduct testing as outlined in the testing section. One issue I've had with gitlab is even though it has correct user name and password, it will not login and I've had to use Github credentials to login to the arch gitlab system. (which I do not like) This is after going through successfully adding new SSH key to my account, successfully changing the password for my account, e.g. <quote - updated 9/17/23> Hello, David C. Rankin! The password for your GitLab account on https://gitlab.archlinux.org has successfully been changed. </quote> But it does not work. Every time login fails at: https://accounts.archlinux.org/realms/archlinux/login-actions/authenticate Neither the username 'drankinatty' or the e-mail works. So as Bugtracker is migrated, there may need to be a fix or two for the gitlab logins to work. I still can't login. -- David C. Rankin, J.D.,P.E.

3 3

btrfs advice needed
by Jude DaShiell 12 Nov '23

12 Nov '23

I've got a corrupted btrfs partition. Does the archlinux install disk have btrfsck on it? If yes, I'll probably need to run btrfs --repair /dev/sda2 on the system. If repair goes badly, I'll have to reinstall the system. I would like to know how to prevent btrfs corruption in the first place. -- Jude <jdashiel at panix dot com> "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." Ed Howdershelt 1940.

4 6

Re: Anticipation - Any idea when linux 6.6 will emerge from core-testing? (fwd)
by Erich Eckner 08 Nov '23

08 Nov '23

Hi David, not answering your question, but: What speaks against testing with the linux package in core-testing? IIRC, the linux package was one of the packages, that could be up- and down-graded quite independently of all the other packages. regards, Erich On Tue, 7 Nov 2023, David C. Rankin wrote: > Devs, > > I've kept an eye on linux-6.6 that hit the core-testing repo on 10/31, but > has not yet hit core. Any estimate when that may happen. The only reason for > the anxiety is the untested patch for the AUR nvidia-390xx driver and I'd > like to have a better idea of when I may need to set triage-time aside for > the update. > > Anybody's crystal-ball working a bit more clearly than mine? > > -- > David C. Rankin, J.D.,P.E. >

2 1

Anticipation - Any idea when linux 6.6 will emerge from core-testing?
by David C. Rankin 08 Nov '23

08 Nov '23

Devs, I've kept an eye on linux-6.6 that hit the core-testing repo on 10/31, but has not yet hit core. Any estimate when that may happen. The only reason for the anxiety is the untested patch for the AUR nvidia-390xx driver and I'd like to have a better idea of when I may need to set triage-time aside for the update. Anybody's crystal-ball working a bit more clearly than mine? -- David C. Rankin, J.D.,P.E.

1 0

Netbeans Package update to version 19 (PKGBUILD)
by mattyr＠mailbox.org 04 Nov '23

04 Nov '23

Hi all, I've made some updates to the Netbeans package and would like to open a merge request in order to bring it up to version 19. My fork is here:https://gitlab.archlinux.org/matty_r/netbeans - main branch. I've attempted to contact some of the package owners but haven't heard anything. Any assistance would be appreciated. Regards, Matty_r

1 0

accessibility install fail
by Jude DaShiell 04 Nov '23

04 Nov '23

You boot up and hit downarrow then enter when the hdmi card gets selected for video and no hdmi video is available so no sound. does a quick way to disable hdmi on the system exist that can be used ahead of an actual install? -- Jude <jdashiel at panix dot com> "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." Ed Howdershelt 1940.

1 0