- Arch-general - lists.archlinux.org

Re: [arch-general] [arch-dev-public] Sharing my repo-tools
by Mauro Santos 11 Apr '10

11 Apr '10

On 04/11/2010 08:09 PM, Pierre Schmitz wrote: > On Sat, 10 Apr 2010 03:13:33 +0200, Pierre Schmitz <pierre(a)archlinux.de> > wrote: >> I have finally put the tools I use to sync my local repo and to create >> those magic rebuild lists into a git repo. I polished them to increase >> usability and portability, but they are not really ready to be run e.g. > on >> gerolde. > > I just added a simple integrity check for a repo: > https://git.archlinux.de/repo-tools.git/tree/checkrepo > > Any ideas why writing that md5sums.txt is so slow? > Your inner for loop is slowing everything, I have found that FOR loops in bash are very slow. If the loop will run only a few times it is ok but if the intended purpose is to run hundreds of times then it is better to find an alternative. Maybe you can try to replace the inner loop with something involving 'find ... -exec something' or some recursive grep and mix it with awk, I have found that it can be many times faster than using FOR loops.

1 0

[arch-general] Trying to get Brother HL2035 to work...
by fons＠kokkinizita.net 11 Apr '10

11 Apr '10

Hello all, I installed everything required to use the Brother HL2035 printer as described on the wiki: <http://wiki.archlinux.org/index.php/Brother_HL-2030>. This all worked nicely, the printer shows up in Cups, but nothing gets printed... Trying to print a test page (or anything else) launches some processes: daemon 1678 1645 0 12:25 ? 00:00:00 /bin/sh /usr/lib/cups/filter/brlpdwrapperHL2030 16 anonymous Test Page 1 job-uu daemon 1679 1645 0 12:25 ? 00:00:00 usb:/dev/usb/lp0 16 anonymous Test Page 1 job-uuid=urn:uuid:d460eeb3-d9b9-32b7- daemon 1705 1678 0 12:25 ? 00:00:00 /bin/sh /usr/local/Brother/lpd/filterHL2030 daemon 1733 1705 0 12:25 ? 00:00:00 /usr/local/Brother/lpd/rawtobr2 -pi /usr/local/Brother/inf/paperinf -rc /usr/lo which remain until the job is canceled. In /var/log/kernel.log I found this which may be an indication but I fail to understand what exactly it means: Apr 11 12:33:51 zita1 kernel: usb 3-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 Apr 11 12:33:56 zita1 kernel: usb 3-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 Apr 11 12:34:01 zita1 kernel: usb 3-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 Apr 11 12:34:07 zita1 kernel: usb 3-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 Apr 11 12:34:12 zita1 kernel: usb 3-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 lsusb produces: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 04f9:0027 Brother Industries, Ltd HL-2030 Laser Printer Bus 003 Device 003: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Tested on two different machines, exactly same result. Any help to get this working will be appreciated ! -- FA O tu, che porte, correndo si ? E guerra e morte !

2 2

[arch-general] Update Error - :: sysprof-module: requires kernel26<2.6.33 (is this a wait on the mirrors thing?)
by David C. Rankin 11 Apr '10

11 Apr '10

Guys, Trying to update and I received: 05:15 nirvana:~/img/pics/portraits/dcr> pms -u :: Synchronizing package databases... core is up to date extra is up to date community is up to date archlinuxfr is up to date kdemod-legacy is up to date :: Starting full system upgrade... resolving dependencies... looking for inter-conflicts... error: failed to prepare transaction (could not satisfy dependencies) :: sysprof-module: requires kernel26<2.6.33 Is this a wait on the mirror to sync issue or is this a bad side effect from having updated with testing while the dbrebuild WARNING was in place and then downgrading with pacman -Syuu? How to fix? -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com

2 2

[arch-general] pacman -Syu
by fons＠kokkinizita.net 11 Apr '10

11 Apr '10

What do I need to do in order to update this system ? ... checking package integrity... (196/196) checking for file conflicts [#################################################################] 100% error: failed to commit transaction (conflicting files) pm-utils: /etc/pm/ exists in filesystem pm-utils: /usr/lib/pkgconfig/pm-utils.pc exists in filesystem pm-utils: /usr/share/man/man1/on_ac_power.1.gz exists in filesystem pm-utils: /usr/share/man/man1/pm-is-supported.1.gz exists in filesystem pm-utils: /usr/share/man/man8/pm-action.8.gz exists in filesystem pm-utils: /usr/share/man/man8/pm-hibernate.8.gz exists in filesystem pm-utils: /usr/share/man/man8/pm-pmu.8.gz exists in filesystem pm-utils: /usr/share/man/man8/pm-powersave.8.gz exists in filesystem pm-utils: /usr/share/man/man8/pm-suspend-hybrid.8.gz exists in filesystem pm-utils: /usr/share/man/man8/pm-suspend.8.gz exists in filesystem Errors occurred, no packages were upgraded. TIA, -- FA O tu, che porte, correndo si ? E guerra e morte !

3 3

[arch-general] successful pacman -Syu w/new kernal26: Now have microscopic console font :-(
by Joe(theWordy)Philbrook 11 Apr '10

11 Apr '10

Sigh... I just did a pacman -Syu. It updated lots of stuff. The only issues listed in my pacman.log were: While: updating keystore /etc/ssl/certs/java/cacerts... ignored import, signature not available: /etc/ssl/certs/COMODO_Certification_Authority.pem keytool error: java.security.NoSuchAlgorithmException: SHA384withECDSA Signature not available And a warning about my manually managed separate primary boot partition not being mounted... Which will never be mounted during *_any_* Linux distro's upgrade process... I compared /boot and /mnt/boot grub entries, verified that the vmlinuz and kernel.img filenames hadn't changed, Then copied the vmlinuz, and both kernal.img files from /boot, to /mnt/boot And rebooted... As far as I can see (so far) the only real issue I have with my upgraded Arch system is that the size of my console fonts has drastically been reduced... Once the gui started, all the X font sizes were just fine. But my eyes hurt just trying to read the console well enough to login to run startx... The next thing I did was to edit MY grub's kernel line to include: vga=normal, and rebooted. But partway through the boot messages the screen still clears and the font size becomes painfully small. Next, Even though I've never had to bother with framebuffer before (I prefer the normal sized console font, and I don't like pretty pictures on my screen until AFTER I run startx...) I read the "FRAMEBUFFER RESOLUTION SETTINGS" comments in the /boot/grub/menu.lst file. And that led me to the framebuffer section of the grub wiki file. Which in turn led to my installing hwinfo from aur on this amd_64 laptop. 02: None 00.0: 11001 VESA Framebuffer [Created at bios.459] Unique ID: rdCR.mrzO17IxmKC Hardware Class: framebuffer Model: "ATI MS48" Vendor: "ATI Technologies Inc." Device: "MS48" SubVendor: "ATI Radeon® Xpress 1150" SubDevice: Revision: "01.00" Memory Size: 16 MB Memory Range: 0xc8000000-0xc8ffffff (rw) <snip> Mode 0x0312: 640x480 (+1920), 24 bits <snip> the comments in the menu.lst file say on the 16MB line "0x312=786" So I tried vga=786 And rebooted... Just before the boot messages list ":: Bringing up loopback interface" the screen still clears {expletive-deleted!} And then the fontsize still makes me squint. {many expletives-deleted!} Problem #1 How can I stop the reduction in the console font size??? Evidently the framebuffer setting isn't doing it... Problem #2 How can I stop the boot process from clearing the screen on tty1??? I really dislike ANY of the boot messages to disappear. I "LIKE" being able to use gpm to copy/paste them into a console editor... I didn't like it when it cleared the last few lines just prior to giving me a login prompt. But at least that could be compensated for by the kludge of including a multi-line echo statement in /etc/rc.local. But now that it lops the majority of the boot messages off the top it's beyond my ability to kludgon it into submission. ;-( Suggestions anyone? -- | ~^~ ~^~ | <?> <?> Joe (theWordy) Philbrook | ^ J(tWdy)P | \___/ <<jtwdyp(a)ttlc.net>> I'm NOT clueless... But I just don't know.

2 3

[arch-general] What are the dual isos about?
by Karol Babioch 10 Apr '10

10 Apr '10

Hi, I've found the following link, which seems to contain more up to date images of archlinux and the installer: http://build.archlinux.org/isos/ Now I'm wondering what these dual images are about? Is this a new architecture? Whats the difference to x86_64 in that case? How is the support for packages? Thanks in advance! -- Best regards, Karol Babioch <karol(a)babioch.de>

3 3

[arch-general] Arch Linux Release Question
by Keith Hinton 10 Apr '10

10 Apr '10

Hi, First of all, if anyone is curious as to why I have posted to the Arch-General mailing list, I'm mainly doing this, in case any of the Arch Release team is actually hanging out on this list. I was curious, seeing as the last Arch Linux release was in August of last year, if there will be one for the lovely new year of 2010? If someone could get back to me on that question I would for sure appreciate it. I hope that all is going well for Arch Linux development! Talk to you folks later. I haven't been as active on this list due to personal commitments but do watch for any interesting activity from time-to-time. Thanks. Sincere Regards, --Keith

10 17

[arch-general] xorg-server 1.8 - Wiki?
by pyther 10 Apr '10

10 Apr '10

On 04/04/2010 04:56 PM, Jan de Groot wrote: > <snip> > > Things todo before this merges to extra: > - Add documentation about input configuration to our wiki, as hal is > deprecated now > - Ask nvidia for a driver that works without ignoreABI, I'm sure they > can give us a timeframe for that > - Add xorg.conf.d config files for input drivers, right now only evdev > and synaptics have config files > - Fix xf86-video-siliconmotion, xf86-video-unichrome, xf86-video-nouveau > > Has there been any work on a wiki entry for Xorg 1.8? I don't see anything on the main wiki. I just don't want to duplicate efforts. Cheers!

2 5

[arch-general] upgrade problems
by Shridhar Daithankar 09 Apr '10

09 Apr '10

Hi, I got this pacman error just now, when I wanted to upgrade to 2.6.33. # pacman -Su :: Starting full system upgrade... resolving dependencies... looking for inter-conflicts... error: failed to prepare transaction (could not satisfy dependencies) :: kqemu: requires kernel26<2.6.33 :: madwifi: requires kernel26<2.6.33 I removed both these packages and the upgrade is proceeding. Just a heads up for others who actually need these packages. I don't know why I had madwifi as there is no wireless card in this desktop machine. -- Regards Shridhar

3 2

[arch-general] AUR comments gone?
by David Rosenstrauch 09 Apr '10

09 Apr '10

Just noticed today that all the comments are gone from the AUR pages. Is that intentional? Or if not, is there any way to get them restored? Thanks, DR

2 1

Re: [arch-general] [arch-dev-public] [signoff] openssl, heimdal and icu rebuilds
by Evangelos Foutras 08 Apr '10

08 Apr '10

On 09/04/10 01:20, Pierre Schmitz wrote: > On Thu, 08 Apr 2010 22:37:13 +0200, Pierre Schmitz<pierre(a)archlinux.de> > wrote: >> The move is in progress...please don't touch anything while we are still >> on it. :-) > > So, we are done. Mirrors should be back in sync some day. Have the packages in [xorg18] been moved into [extra] as well? I cannot verify this from looking at the website, though it might not have synchronized yet.

2 2

Re: [arch-general] [arch-dev-public] openssl 1.0 rebuild
by Jim Pryor 08 Apr '10

08 Apr '10

On Thu, Apr 08, 2010 at 03:42:05PM +0200, Thomas Bächler wrote: > Am 08.04.2010 15:38, schrieb Pierre Schmitz: > > On Thu, 08 Apr 2010 11:41:12 +0200, Thomas Bächler <thomas(a)archlinux.org> > > wrote: > >> Thanks to a hint from Pierre, I fixed it: > >> # update-ca-certificates --fresh > >> The hashes in /etc/ssl/certs are different from the ones before the > >> command, so I suspect there will be more failures like this. Can we > >> please get the above command in post_install in the case we are > >> upgrading from a version older than 1.0.0? > > > > The new ca-certificates packages does this for you. > > Very nice, thank you. > > This should also solve Jim's problem, see his reply to my first post. I'm still using 20090814-3, but I can confirm that doing # update-ca-certificates --fresh manually fixes the elinks problem with verifying certificates. Thanks. -- Jim Pryor profjim(a)jimpryor.net

1 0

[arch-general] nvidia with latest Xorg
by Xavier Chantry 07 Apr '10

07 Apr '10

On Wed, Apr 7, 2010 at 7:35 PM, David C. Rankin <drankinatty(a)suddenlinkmail.com> wrote: > On 04/07/2010 09:55 AM, David Rosenstrauch wrote: >> On 04/07/2010 10:46 AM, Xavier Chantry wrote: >>> Can you attach full Xorg log and config ? >> >> I'm not using any xorg config. Log is at: >> >> http://www.darose.net/Xorg.0.log >> >>> And does it work with xf86-input-keyboard driver ? >> >> I have xf86-input-keyboard installed. I assumed X was just >> automatically choosing evdev (as I have no xorg config). >> >> Thanks, >> >> DR >> > > On the same note, after the latest Xorg update, X (nVidia card) was failing to > start on the same xorg.conf I had used with my arch box since I first installed > arch. The xorg.conf was generated by the nvidia-xconfig app. The xorg.conf was: > > http://www.3111skyline.com/dl/dt/X/xorg/xorg.conf.sav > > Something is not as it should be in the latest X release. > > (p.s. this is 'in addition to' and not 'in lieu of' the current topic) > This is a complete thread hijacking, has nothing to do with the current topic, and adds NOTHING to it. darose updated to the Xserver in EXTRA which is 1.7.5.902-1 nvidia works fine in extra, even in testing ! It only needs Option "IgnoreABI" "True" with xorg 1.8 which is a separate experimental repository AND that was already documented in its announcement : http://mailman.archlinux.org/pipermail/arch-dev-public/2010-April/016387.ht…

2 1

Re: [arch-general] [arch-dev-public] WARNING: [testing] broken due to openssl and heimdal rebuilds
by Florian Pritz 07 Apr '10

07 Apr '10

On 07.04.2010 06:42, Pierre Schmitz wrote: > I just tested what happens if I change pacman depends to > "'libarchive>=2.8.3-3' 'libfetch>=2.30-3'". Maybe start using sodeps to generate those dependencies? libfetch (doesn't have a soname with version btw) would depend on the new openssl libs and pacman should take care of the order. Have you already checked the patch Allan? -- Florian Pritz -- {flo,bluewind}(a)server-speed.net

3 4

Re: [arch-general] [arch-dev-public] openssl 1.0 rebuild
by Jim Pryor 07 Apr '10

07 Apr '10

On Wed, Apr 07, 2010 at 11:49:10AM +0200, Thomas Bächler wrote: > Am 30.03.2010 03:36, schrieb Pierre Schmitz: > > I created a rebuld list for the just released openssl 1.0.0 (Thanks Dan > > for fixing the todo list that fast!). These are 236 packages for each > > architecture; so this will need some kind of planning and a bunch of people > > to help. But for now I'll at least wait for the Gnome and KDE release and > > also Allan's heimdal rebuilds. > > > > Fedora uses openssl 1 since Fedora 12 which means if there are any issues > > we'll probably find a solution there. Till then I just need to port the man > > page patch (easy) and see why it compiles with -DOPENSSL_IA32_SSE2 on > > x86_64 and if that is an issue at all. > > The new openssl breaks RADIUS authentication with wpa_supplicant for me. > It fails to verify the CA certificate and aborts authentication. It > works if I disable verification of the certificates in the configuration > (which is bad, but still helps). I noticed something which sounds similar. After I synched, I rebuilt elinks-git against all the new libs I had installed. Then I noticed I was getting ssl errors whenever I went to an https: site. Turns out I needed to turn off the option connection.ssl.cert_verify: ## connection.ssl.cert_verify [0|1] # Verify the peer's SSL certificate. Note that this needs extensive # configuration of OpenSSL by the user. set connection.ssl.cert_verify = 0 Despite the "extensive configuration" warning, this was working before, but after rebuilding against openssl 1.0.0, it's not. The openssl upgrade brought some changes to /etc/ssl/openssl.cnf. I haven't tracked down yet whether any of those may be responsible for this. -- Jim Pryor profjim(a)jimpryor.net

1 0

[arch-general] jack & qjackctl
by fons＠kokkinizita.net 07 Apr '10

07 Apr '10

It seems like Arch is currently offering Jack and qjackctl packages that are not compatible. The Jack authors changed one some command line options in 0.118. '-R' for realtime is no longer available as realtime is now the default, and the new '-r' means 'no realtime'. Qjackctl 0.3.6 is aware of this, but won't work well with Jack 0.116 which is still the one available from Arch. In other words, the update of qjackctl was probably a bit premature. Ciao, -- FA O tu, che porte, correndo si ? E guerra e morte !

4 5

[arch-general] missing ruby-htmlentities
by Shacristo 07 Apr '10

07 Apr '10

ruby-htmlentities seems to have gone missing from community. Has it been dropped?

1 0

[arch-general] libao (and other Xiph package) rebuild schedule?
by Ray Kohler 06 Apr '10

06 Apr '10

A little while back I mentioned here that there were several xiph.org releases coming up. These did happen, and I flagged those packages out of date. Now that the openssl, heimdal, and icu updates are done, I'd like to know where these stand. Normally I'd not write such a "nag mail", but the only package with a soname bump (libao) is owned by an ex-developer (Hugo Doria), so I thought it might have been missed. I also had some extra details to provide. The full details of the upstream releases can be seen at http://xiph.org/press/2010/vorbis-surround/ and http://xiph.org/press/2010/libogg-1.2.0/ . Only libao has a soname bump; libogg and libvorbis have none. The new vorbis-tools also requires the new libao. libao isn't widely used, so it shouldn't be much of a rebuild. Another thing worth mentioning is that libao now (optionally) supports many more drivers/plugins out of the box. One of them is pulseaudio. This likely obsoletes the libao-pulse package currently in community. The only hassle here is not being able to do a straight split package since libao is in [extra] and libao-pulse (with pulseaudio itself) is is in [community]. That said, it should be workable to build the [extra] package entirely without pulseaudio support, and then build it again for the [community] package, installing only the pulse plugin from that PKGBUILD. libao seems happy enough to load any plugin it finds in its modules directory, whether or not they were built together (though I didn't test this with the pulse plugin in particular). vcut is now built by default (as upstream finally considers it ready for prime-time), so the explicit "--enable-vcut" can be removed from vorbis-tools' configure arguments. I've been using these upgrades since a few months before they were released, and they are solid. (Why am I personally so interested in these upgrades? One big feature, oddly missing from the release announcement, is that ogg123 now supports ReplayGain, making it a reasonable replacement for a bigger music player, at least for me. So vorbis-tools is the main driver as far as I'm concerned.)

1 0

[arch-general] [signoff] kernel26 2.6.33.2-1
by Tobias Powalowski 06 Apr '10

06 Apr '10

Latest kernel is in testing since weekend, please signoff for both arches. greetings tpowa -- Tobias Powalowski Archlinux Developer & Package Maintainer (tpowa) http://www.archlinux.org tpowa(a)archlinux.org

5 4

[arch-general] kaffeine [sigh] is there an alternative that:...
by Joe(theWordy)Philbrook 06 Apr '10

06 Apr '10

I'm no longer a kde fan, I used to be until almost everything they changed for kde4 ticked me off... Over all I'm just as glad they did because otherwise I wouldn't have discovered E17 (or XFCE) which are currently my two main desktop environments. However, kde has some apps that I'm still addicted to: One of them is the old kde3x version of kaffiene for playing my music files. I never really embraced most of it's advanced features, and frankly I dislike using playlist files. What attracted me to kaffeine was when I discovered that with the kde3x version I could use the keyboard to do an: File->Open URL->PathToMusicDirTree Where PathToMusicDirTree is the top most directory of a multi directory structure that contains only music files and directories to more music files. And kaffeine would open not only any music files within "PathToMusicDirTree" but recursively any music files in any of it's subdirectories. I could add and delete files to and from this directory tree and know that the next "File->Open URL->PathToMusicDirTree" would result in kaffeine playing all of them. At most all I needed to do was to set shuffle and repeat options to enjoy my background music for as long as I wanted it. That is all I ever wanted of a music player... Since kde4 I've learned that I really need to build a playlist by repetitively using "File->Open URL-> NonRecursiveDir" until I've added each and every subdir of "PathToMusicDirTree" one at a time. Worse, I need to rebuild the playlist file every time I want to add or remove music from my files... But every time I've tried an alternative it either insists on making me work with playlists, or only wants me to control it via the {many expletives deleted}rodent pointing device. or both. Worse still with the version I added to my Arch install (extra/kaffeine 1.0pre3-1) the command "Playlist ->Save As" doesn't work. So I have to work with playlists I create from one of my other distros. Another odd thing about this version of kaffeine is that "File ->Play Audio CD" only likes to play the first track... Could somebody recommend another media player I could try that will let me create temporary music lists on the fly by typing the path to a parent dir containing multiple music directories??? One that understands keyboard commands for it's functions??? And hopefully one that doesn't force me to break out a microscope to read any displayed text or labels on some prettified gui representation of some livingroom sound system where I don't even know which knob or button it wants me to click on is supposed to do what??? -- | ~^~ ~^~ | <?> <?> Joe (theWordy) Philbrook | ^ J(tWdy)P | \___/ <<jtwdyp(a)ttlc.net>>

16 27

[arch-general] Failed installation - part 2
by fons＠kokkinizita.net 06 Apr '10

06 Apr '10

Hello all, I retried the installation that failed last week, with the same result. But this time I found this: 3 packages were reported to be 'corrupted': gettext-0.17-3-i686.pkg.tar.gz perl-5.10.1-5-i686.pkg.tar.gz man-pages-3.24-1-1-any.pkg.tar.gz I could well have missed this last time as to see the error you have to scroll down the page instead of just hitting RETURN to continue. I tried again twice using different mirrors, same result. All this with the 2009.8 install images, and run with LC_COLLATE=C. Then I tried the new one. This time all packages downloaded without errors, but the install failed at the 'Install GRUB' stage with on tty7 the messages that neither of /boot/grub/stage1 /grub/stage1 did exist. So now I'm really lost... The only real difference between this install and all the previous ones is that this time I have to go via an http proxy. Any help will be appreciated ! -- FA O tu, che porte, correndo si ? E guerra e morte !

1 0

[arch-general] testing xorg-server 1.8 [xorg18]
by Marek Otahal 06 Apr '10

06 Apr '10

Thank you for a great job, Jan. I can confirm the xorg-server 1.8 works great for me! :) I'm running on [testing], i686, kernel 2.6.33.2, xf86-video-intel, touchpad(synaptics), keyboard, usb keyb/mouse hotpluging works as well, sound(intel hda) & guvc video webcam .... just upgraded and voila, works like a charm! :) Happy Easter to all of you! Marek ...well, here's an update after a deeper tryout :) *touchpad(synaptics) - issues with tapping which does not work /buttons do/ *a note for testers, one can disable !hal from rc.conf but make sure to include dbus instead(hal used to start it up) otherwise policykit fails *I have troubles with resuming from suspend/black screen/ but have to make sure if it is not a problem of kernel. *as I'm using kde, here's a problem: battery monitor is disabled and i'm not sure if cpu freq scaling under kde works(probably problem of kde?, acpi command shows correct info), also there is a dependency on hal- pacman -Rcsn hal would remove a great bunch of packages(including kde), how do I figure, whats the dep.? Thanks once again, Mark PS: I would reply to arch-dev-public thread but i don't have write access to it -- Marek Otahal :o)

3 3

[arch-general] F@H Group Logo Missing
by James Corley 06 Apr '10

06 Apr '10

The Folding@Home Arch Linux group logo is missing. http://fah-web.stanford.edu/cgi-bin/main.py?qtype=teampage&teamnum=45032

3 6

Re: [arch-general] [arch-dev-public] [signoff] openssl, heimdal and icu rebuilds
by Flavio Costa 05 Apr '10

05 Apr '10

On Mon, Apr 5, 2010 at 4:04 PM, Dan McGee <dpmcgee(a)gmail.com> wrote: > On Mon, Apr 5, 2010 at 1:39 PM, Andreas Radke <a.radke(a)arcor.de> wrote: > > OpenOffice related packges: > > > > OpenOffice-base is done. > > Go-OpenOffice i686 done, x86_64 failed due to a smp related issue. Will > > build it over night non-smp. > > > > Openoffice-base- beta/devel are missing and both are no stoppers to > > me and will be build with updated versions within a few days. We can > > leave them out for now. > > > > > > Xorg-server depends on OpenSSL. So we need to move it along with > > OpenSSL/Heimdal/Icu rebuild. Means also to move the kernel and other > > related Xorg packages from testing (not the Xorg18 repo). > > > > So far now further issues. Signoff x86_64. > > I had good luck with everything yesterday on both my i686 and x86_64 > boxes. pacman-git hiccuped a bit but that is my own fault (so had to > do some reinstalling when vercmp was failing due to linking issues). > openoffice-base was also working fine last night on my x86_64 box. > > Thanks to everyone who chipped in here, this was a big update that got > done really quickly. I'll signoff for both architectures on just about > everything (i686 is a headless, no-X box, x86_64 is my desktop). > > -Dan > I had some 'vercmp' linking issues when upgrading to kernel26 (2.6.33.1-1 -> 2.6.33.2-1) and system-tools-backends (2.8.3-1 -> 2.10.0-1), so I guess it is not an isolated problem. After the complete -Suy, I manually -S'ed kernel26 and system-tools-backends and they ran smoothly. -- Flávio Coutinho da Costa

1 0

[arch-general] Some icons don't work anymore since update to Gnome 2.30
by Karol Babioch 04 Apr '10

04 Apr '10

Hi, I've upgraded to Gnome 2.30 today, which worked quite great so far. I'm astonished by the speed such updates get into the repositories, you are doing a great job! However I've experienced a strange issue. Whenever I try to click on some of my icons on the desktop (e.g. "Computer", "Home", "Trash"), the desktop seems to get refreshed, and nothing happens. Other icons (text files, movies) work just like expected, so I don't know what the issue could be. When I start Nautilus from the menu, it works also just great, so there has to be something with the icons wrong? Can anyone reproduce/confirm this? Seems really odd! -- Best regards, Karol Babioch <karol(a)babioch.de>

4 5