- Arch-general - lists.archlinux.org

Re: [arch-general] Linux-3.7.3-1-i686 blank screen
by Jean-Marie Duprez 24 Jan '13

24 Jan '13

On Tue, 22 Jan 2013 21:07:56 +0000 Whiskers <catwheezel at operamail.com <https://mailman.archlinux.org/mailman/listinfo/arch-general>> wrote: >* On Tue, 22 Jan 2013 19:25:45 +0100 Karol Babioch <karol at babioch.de <https://mailman.archlinux.org/mailman/listinfo/arch-general>> wrote:*>* *>* >Hi,*>* >*>* >Am 22.01.2013 18:34, schrieb Whiskers:*>* >> An 'unconfirmed' bug is listed at <https://bugs.archlinux.org/> but this*>* >> seems to relate to vlc segfaulting with the new kernel, so I don't know*>* >> if that's the same problem affecting me.*>* >*>* >No, that's almost certainly another issue.*>* >*>* >You may want to try 3.7.4-1 from testing. If that doesn't fix your*>* >issue, you are probably best off to contact upstream directly. With*>* >Linux 3.7 there was quite some restructuring of the graphics stack going*>* >on, so it may well be that in some cases it breaks things.*>* >*>* >Best regards,*>* >Karol Babioch*>* >*>* *>* *>* I'm using the Nouveau video driver with an old laptop. As Linux-3.6.11-1*>* seems to be stable for me, I'll wait for the next kernel version to reach*>* the core repository. * If you're talking about 3.7.4, then it's unlikely to fix your issue, because there are only radeon fixes in the changeloghttp://www.kernel.org/pub/linux/kernel/v3.0/ChangeLog-3.7.4. >* *>* I'll also try to work out how to have the previous kernel still available*>* to Grub-legacy after the next kernel upgrade.*>* *>* For the record, this is what my video hardware says it is:*>* *>* $ lspci | grep VGA*>* 01:00.0 VGA compatible controller: NVIDIA Corporation NV31M [GeForce FX*>* Go5600] (rev a1)*>* *Hi, I have exactly the same problem with a DELL LATITUDE D800 (a good old machine of 2004 which accomode very well of ARchlinux !). Until now I had no difficulty with kernels 3.6 or LTS. With the kernel 3.7.4, the system started to boot normally but the display went blank before the login prompt appeared ! By precaution, I always have an installed linus-lts what allowed me to return quickly to the version 3.6. which works correctly. I'm using the Nouveau video driver (last release) and my video harware is : VGA compatible controller: NVIDIA Corporation NV34M [GeForce FX Go5200 64M] (rev a1) Regards ! Jean-Marie Duprez

1 0

Re: [arch-general] failed to set xfermode on multiple disks SOLVED
by Jameson 24 Jan '13

24 Jan '13

On Tue, Jan 22, 2013 at 2:50 PM, Jameson <imntreal(a)gmail.com> wrote: > On Mon, Jan 21, 2013 at 6:11 PM, Jameson <imntreal(a)gmail.com> wrote: >> On Mon, Jan 21, 2013 at 12:38 AM, Martín Cigorraga <msx(a)archlinux.us> wrote: >>> On Mon, Jan 21, 2013 at 12:33 AM, Jameson <imntreal(a)gmail.com> wrote: >>> >>>> I hope someone can help me. I have a server with two SSDs that >>>> contain a mirrored btrfs volume holding /, and multiple HDDs that are >>>> in a btrfs RAID10 array. I updated to linux 3.7.3 in testing, and it >>>> failed to boot. I booted from a USB drive, and reinstalled 3.6.?, and >>>> I still get failed to set xfermode (err_mask=0x40). I don't see >>>> anything in dmesg that makes a difference. The only thing that >>>> changed was the kernels, back and forth. Does anyone have an idea, or >>>> am I going to have to re-install? Thanks. >>>> >>> >>> Hi Jameson, a blind shot here since I'm not familiar yet with SSD setups: >>> did you tried running a fsck? In the past I had a similar situation with >>> conventional hard disks and the problem was some corrupted data in /boot. >>> >>> Hope you have your beast up soon! >> >> Yes. I had actually forgotten that I had a separate ext4 boot >> partition. I've ran fsck on it as well as btrfsck on my mirrored >> root, and my raid10 array. All return fine. During boot, between >> some of the xfermode errors, I can see the message where it is looking >> for btrfs file systems, and then a repair console which says that the >> root filesystem can't be found which doesn't respond for some reason. >> I'll try to find another keyboard to see if it will make a difference. >> I did another install of of the old 3.6 kernel, and noticed that it >> threw an error about not being able to find the root filesystem at >> that point also. Any further diagnostic advice will be appreciated. > > Also, it turns out changing USB keyboards makes no difference. I > don't think I have a PS/2 keyboard, anymore. I've currently copied > all of my data from my SSD array to a HDD, and plan on trying to get > it to boot. I've successfully ran mkinitcpio and grub-mkconfig from a > chroot on the HDD which did not return the error about not finding the > root filesystem, so I'm hopeful it will at least get me back up and > running. I forgot to grub-install, though, so I'll have to wait until > I get home to test it. In case anyone else runs into this, I needed to patch the kernel with the patch provided in this bug: https://bugzilla.kernel.org/show_bug.cgi?id=51881

1 0

[arch-general] vboxnetflt module broken in virtualbox-host-modules-lts?
by David Rosenstrauch 23 Jan '13

23 Jan '13

I'm running the LTS kernel, and VirtualBox has been working fine under it until recently. However sometime in the last few days (after a recent upgrade, I'm guessing), I can no longer launch VM's. Apparently vboxnetflt is never getting loaded. And when I try to load it manually, I get the following error: [darose@daroselin ~]$ sudo modprobe vboxnetflt modprobe: ERROR: could not insert 'vboxnetflt': Invalid argument Anyone know what the problem might be? I didn't see any bug reports about this. Does the virtualbox-host-modules-lts need to be upgraded perhaps? Thanks, DR

3 2

[arch-general] Avermedia Volar Green A835
by Δημήτρης Ζέρβας 22 Jan '13

22 Jan '13

I am trying to make avertv a835 work. I tried this (found in gentoo forums): cd /lib/firmware sudo wget http://xgazza.altervista.org/Linux/DVB/dvb-usb-af9035-01.fw cd ~ mkdir TV cd TV wget http://xgazza.altervista.org/Linux/DVB/Drivers/AF9035_xgaz_3.0.0.tar.bz2 tar -xjf AF9035_xgaz_3.0.0.tar.bz2 cd AF9035_xgaz_3.0.0 make sudo make install I replaced linux-headers with linux in the Makefile, but I can't compile it, I get error in include/dvb_frontend.h

1 0

Re: [arch-general] failed to set xfermode on multiple disks (Was: Busted Server)
by Jameson 22 Jan '13

22 Jan '13

On Mon, Jan 21, 2013 at 12:38 AM, Martín Cigorraga <msx(a)archlinux.us> wrote: > On Mon, Jan 21, 2013 at 12:33 AM, Jameson <imntreal(a)gmail.com> wrote: > >> I hope someone can help me. I have a server with two SSDs that >> contain a mirrored btrfs volume holding /, and multiple HDDs that are >> in a btrfs RAID10 array. I updated to linux 3.7.3 in testing, and it >> failed to boot. I booted from a USB drive, and reinstalled 3.6.?, and >> I still get failed to set xfermode (err_mask=0x40). I don't see >> anything in dmesg that makes a difference. The only thing that >> changed was the kernels, back and forth. Does anyone have an idea, or >> am I going to have to re-install? Thanks. >> > > Hi Jameson, a blind shot here since I'm not familiar yet with SSD setups: > did you tried running a fsck? In the past I had a similar situation with > conventional hard disks and the problem was some corrupted data in /boot. > > Hope you have your beast up soon! Yes. I had actually forgotten that I had a separate ext4 boot partition. I've ran fsck on it as well as btrfsck on my mirrored root, and my raid10 array. All return fine. During boot, between some of the xfermode errors, I can see the message where it is looking for btrfs file systems, and then a repair console which says that the root filesystem can't be found which doesn't respond for some reason. I'll try to find another keyboard to see if it will make a difference. I did another install of of the old 3.6 kernel, and noticed that it threw an error about not being able to find the root filesystem at that point also. Any further diagnostic advice will be appreciated. Thanks, =-Jameson

1 1

[arch-general] Upgrade to linux-3.7.3: system freezes on certain actions in X
by Alain Kalker 22 Jan '13

22 Jan '13

Hardware Info: System: Host: miki-desktop Kernel: 3.6.11-1-ARCH x86_64 (64 bit, gcc: 4.7.2) Desktop: LXDE (Openbox 3.5.0) Distro: Arch Linux Machine: Mobo: FUJITSU SIEMENS model: MS-7504VP version: 1.0 Bios: American Megatrends version: V1.16 date: 08/11/2008 CPU: Dual core Intel Core2 Duo CPU E7500 (-MCP-) cache: 3072 KB flags: (lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx) bmips: 11738.2 Clock Speeds: 1: 1603.00 MHz 2: 1603.00 MHz Graphics: Card: NVIDIA C73 [GeForce 7050 / nForce 630i] bus-ID: 00:10.0 X.Org: 1.13.1 drivers: nouveau (unloaded: fbdev,nv,vesa) Resolution: 1600x900(a)60.0hz GLX Renderer: Gallium 0.4 on NV63 GLX Version: 2.1 Mesa 9.0.1 Direct Rendering: Yes After the upgrade to linux-3.7.3-1, my system began freezing frequently after certain actions (opening a new browser window, switching windows, etc.) The system became totally unresponsive (no Magic SysRq, no response from network). Investigating a little further, I found I could reliably reproduce the freeze by running '$ glxinfo' (occasionally had to repeat it a few times). Downgrading to linux-3.6.11-1 resolved the problem. I'm not reporting this as a bug yet, since linux-3.7.3-1 is marked as out-of-date (linux-3.7.4-1 is in [testing]), this is just a heads-up for other people experiencing the same issue. Regards, Alain

1 0

[arch-general] Request help with wired network config after initial install and reboot
by Mike Cloaked 22 Jan '13

22 Jan '13

I did a base install last night on a machine with only a wired connection - using the arch iso from 2013-01-04 - the install seemed to go fine and I had a network connection using dhcp during the install and once chrooted into /mnt everything seemed fine. At that stage I set up a wired "static ip" connection (following the beginners guide) using ifplugd - but the service does not start from within the chroot during the install - but when I rebooted at the completion of the install I have no network connection and I cannot see any network device (was eth0 during the install) - is it possible this may be due to the systemd-197 package that was installed with the interface naming changed? It seems that the ifconfig command is not available once rebooted into the install and I don't know how to proceed. Can anyone give my any advice on how to get the network up on the newly installed system? I could not find anyone who had the same problem in the forums or searching on the net. Thanks in advance. -- mike c

4 7

[arch-general] video display doesn't get refreshed in GIMP, it seems.
by phani 22 Jan '13

22 Jan '13

i've got a strange problem: when zooming images in the GIMP (installed from [extra]), viewing them larger than the size they are being automatically zoomed to by default, they break up into unconnected, rectangular tiles. moving (panning) them around with the mouse so that they partially leave the screen brings those parts back to be displayed properly. means i have to 'swivel' the image across all borders to get it to display properly. in addition, applying scissors or path tool leaves artefacts on the image that can be removed the same way. i've noticed this first with the development version of GIMP (2.9, compiled from GIT) and thought those were the new GIMP's growing pains -- but then i noticed the same happening with the stable version (2.8). i've tried switching to an earlier version of xf86-video-ati and to an earlier kernel, but neither rectifies the problem. i also tried different options in /etc/X11/xorg.conf.d/ 20-radeon.conf, whith the same result, i.e., none. i've installed (stable) GIMP in (stable) openSUSE i'm keeping in a VirtualBox, and the problem doesn't happen there. i didn't find anything useful via google or the GIMP dev/users lists and am quite puzzled. wondering if one of you guys has an idea where to look? seems to have something to do with the image being refreshed, or not being refreshed, but which part of the system is at fault baffles me. i'm using arch +testing, and here are my system's details: System: Host: laptop Kernel: 3.7.3-1-ARCH x86_64 (64 bit) Desktop: KDE 4.9.98 Distro: Arch Linux Machine: Mobo: ASUSTeK model: K53SK version: 1.0 serial: BSN12345678901234567 Bios: American Megatrends version: K53SK.203 date: 10/11/2011 CPU: Quad core Intel Core i7-2670QM CPU (HT-MCP) clocked at 800.00 MHz Graphics: Card-1: Intel 2nd Generation Core Processor Family Integrated Graphics Controller Card-2: Advanced Micro Devices [AMD] nee ATI Whistler LE [AMD Radeon HD 6625M Graphics] X.org: 1.13.1 drivers: ati,radeon,intel tty size: 114x37 -- phani.

2 3

[arch-general] Strange isse with my arch usb install
by kendell clark 21 Jan '13

21 Jan '13

HI all i've just completed a fresh install of arch on a new pendrive I just bought. The install went smoothly, until I try to access the internet. I setup net-auto-wireless with my home wireless network, and netcfg returns with this error. No such interface: wlan0. Checking dmesg with "dmesg | grep -i wlan0" yields the following. Systemd-udevd: renaming network interface wlan0 to wlo2 This has never happened to me before, so I tried my ethernet port. That failed too, no internet connection. Dmesg again reveals: systemd-udevd: renaming network interface eth0 to enps0." This usb drive is fully updated as of 12:15 a.m jan 21, 2013, stable, no testing repos enabled, multilib enabled. I'm using kernel v3.6.11. I've run into this situation before and I've managed to resolve it by installing nss-myhostname. However, that was when I tried to install from my main hdd, which has testing repos enabled to my usb drive without enabling testing repos. That caused conflicts with a newer kernel, v3.7.2 and systemd 197-4, which conflicted with nss-myhostname. I tried to do the same today, only to find out that systemd seems to contain nss-myhostname, because pacman -S nss-myhostname tries to pull in systemd itself. I'm completely stumped. Googling around doesn't seem to turn up any results, My search term was, udev renames wlan0 to wlo2. Any help would really be appreciated. I'm trying to create a usb drive to use as a diagnostic distro for my fiance's windows computer, virus scanning, password recovery, etc. Thanks Kendell clark

4 3

[arch-general] Help with tigervnc problem - may be a package update required?
by Mike Cloaked 21 Jan '13

21 Jan '13

I have for a long time been using tigervnc until a few months ago and loading the vnc module via xorg.conf with two relevant sections: Section "Module" Load "vnc" EndSection and Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Option "passwordFile" "/opt/Local/etc/vnc/passwd" EndSubSection EndSection However this results in Xorg.0.log as: [ 8.219] (II) LoadModule: "vnc" [ 8.233] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so [ 8.375] (II) Module vnc: vendor="Constantin Kaplinsky" [ 8.375] compiled for 1.12.3, module version = 1.0.0 [ 8.375] Module class: X.Org Server Extension [ 8.375] ABI class: X.Org Server Extension, version 6.0 [ 8.375] (EE) module ABI major version (6) doesn't match the server's version (7) [ 8.375] (II) UnloadModule: "vnc" [ 8.375] (II) Unloading vnc [ 8.377] (EE) Failed to load module "vnc" (module requirement mismatch, 0) Does this mean that tigervnc is out of date and needs fixing or is it s problem with X? Thanks for any advice. -- mike c

3 5