- Arch-general - lists.archlinux.org

Re: [arch-general] Gnome and Arch Issues Under VirtualBox
by Kyle 29 Sep '13

29 Sep '13

Sorry, I'm not really able to help with startx stuff. It hasn't worked for me since about 2007 or so. It seems pretty involved these days to get it working. I've just been starting and stopping the display manager, which is quite easy using systemd. sudo systemctl start gdm sudo systemctl stop gdm Maybe this will help. ~Kyle http://kyle.tk/ -- "Kyle? ... She calls her cake, Kyle?" Out of This World, season 2 episode 21 - "The Amazing Evie"

1 0

[arch-general] Problem bringing up bridge interface with netctl
by Michael Dahlberg 29 Sep '13

29 Sep '13

I recently upgraded to systemd-207 and I'm having some problems using netctl to bring up a bridged interface during the system boot. The problem is that systemd will try and bring the bridged interface up before bringing up the actual network interface that is included in the bridge and, as a result, it times out: (From journalctl) Sep 27 23:59:34 io systemd[1]: Job sys-subsystem-net-devices-net1.710.device/start timed out. Sep 27 23:59:34 io systemd[1]: Timed out waiting for device sys-subsystem-net-devices-net1.710.device. Sep 27 23:59:34 io systemd[1]: Dependency failed for Bridge Connections for VLAN710 VMs. The netctl bridge profile is Description="Bridge Connections for VLAN710 VMs" Interface=br710 Connection=bridge BindsToInterfaces=(net1.710) IP="no" The systemd service definition (netctl(a)br710.service) .include /usr/lib/systemd/system/netctl@.service [Unit] Description=Bridge Connections for VLAN710 VMs BindsTo=sys-subsystem-net-devices-net1.710.device After=sys-subsystem-net-devices-net1.710.device And the profile for net1.710 is Description='VLAN 710 VMs' Interface=net1.710 Connection=vlan # The variable name is plural, but needs precisely one interface BindsToInterfaces=net1 VLANID=710 IP=no As soon as systemd times out waiting for the sys-subsystem-net-devices-net1.710 device to start, it then starts to bring up the VLAN interface (again from journalctl): Sep 27 23:59:35 io network[376]: Starting network profile 'vlan710'... Sep 27 23:59:37 io kernel: e1000e: net1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None Sep 27 23:59:37 io network[376]: Started network profile 'vlan710' Sep 27 23:59:37 io systemd[1]: Started VLAN 710 VMs. Obviously, once I have access to the terminal I can manually bring up the bridge without problems. I seem to have an issue with the timing with which the different parts of the network interfaces are brought up. Is there a way to force systemd to bring up the net1.710 device before attempting to start the bridge? Any help you can provide will be greatly appreciated. Thanks, Mike

2 3

Re: [arch-general] Gnome and Arch Issues Under VirtualBox
by Hunter Jozwiak 29 Sep '13

29 Sep '13

I am trying to edit the xinitrc file so that when I type startx, Gnome will start. It seems that something has gone wrong with the drivers, because I get a result that I need to get information from a log file. I have the link here: Were 1920.266] XddOrg X Server 1.14.3 Release Date: 2013-09-12 Were 1920.267] X Protocol Version 11, Revision 0 Were 1920.267] Build Operating System: Linux 3.11.0-a-ARCH xblehf64 Were 1920.269] Current Operating System: Linux hunterarch 3.11.2-a-ARCH #1 SMP PREEMPT Fri Sep 27 07:35:36 CEST 2013 xblehf64 Were 1920.269] Kernel command line: BOOTIMAGE equals /boot/vmlinuz-linux root equals UUID equals 2d011a48-b22b-4990-a8ae-81989f8a115b rw quiet Were 1920.271] Build Date: 13 September 2013 01:28:59PM Were 1920.272] Were 1920.272] Current version of pixman: 0.30.2 Were 1920.275] Before reporting problems, check httpccwikiddx.org to make sure that you have the latest version. Were 1920.275] Markers: (-) probed, (**were from config file, (equals equals were default setting, (plus plus were from command line, (!!were notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??were unknown. Were 1920.282] (equals equals were Log file: "/var/log/Xorgdd14log", Time: Sun Sep 29 18:10:42 2013 Were 1920.284] (equals equals were Using config directory: "/etc/Xbleaa/xorgddconfddd" Were 1920.285] (equals equals were Using system config directory "/usr/share/Xbleaa/xorgddconfddd" Were 1920.286] (equals equals were No Layout section. Using the first Screen section. Were 1920.286] (equals equals were No screen section available. Using defaults. Were 1920.286] (**were -comgreater-than Screen "Default Screen Section" (0) Were 1920.286] (**were - -comgreater-than Monitor "less-than default monitor greater-than was Were 1920.287] (equals equals were No monitor specified for screen "Default Screen Section". Using a default monitor configuration. Were 1920.287] (equals equals were Automatically adding devices Were 1920.287] (equals equals were Automatically enabling devices Were 1920.287] (equals equals were Automatically adding GPU devices Were 1920.287] (equals equals were FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Typeblea/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ Were 1920.287] (equals equals were ModulePath set to "/usr/lib/xorg/modules" Were 1920.287] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. Were 1920.287] (II) Loader magic: 0x7fdc20 Were 1920.287] (II) Module ABI versions: Were 1920.287] XddOrg ANSI C Emulation: 0.4 Were 1920.287] XddOrg Video Driver: 14.1 Were 1920.287] XddOrg XInput driver : 19.1 Were 1920.287] XddOrg Server Extension : 7.0 Were 1920.288] (II) itselfree86: Adding drm device (/dev/dri/card0) Were 1920.289] setversion 1.4 failed Were 1920.301] (-) PCICCININGG0:0:2:0) 80eeccbeefcc0000:0000 rev 0, Mem à 0xeblejjjjjjj/afgggbaf Were 1920.304] Initializing built-in extension Generic Event Extension Were 1920.305] Initializing built-in extension SHAPE Were 1920.306] Initializing built-in extension MIT-SHM Were 1920.310] Initializing built-in extension XInputExtension Were 1920.311] Initializing built-in extension XTEST Were 1920.312] Initializing built-in extension BIG-REQUESTS Were 1920.314] Initializing built-in extension SYNC Were 1920.314] Initializing built-in extension XKEYBOARD Were 1920.315] Initializing built-in extension XC-MISC Were 1920.316] Initializing built-in extension SECURITY Were 1920.317] Initializing built-in extension XINERAMA Were 1920.318] Initializing built-in extension ITSELFIXES Were 1920.320] Initializing built-in extension RENDER Were 1920.325] Initializing built-in extension RANDR Were 1920.326] Initializing built-in extension COMPOSITE Were 1920.326] Initializing built-in extension DAMAGE Were 1920.327] Initializing built-in extension MIT-SCREEN-SAVER Were 1920.328] Initializing built-in extension DOUBLE-BUFFER Were 1920.328] Initializing built-in extension RECORD Were 1920.329] Initializing built-in extension DPMS Were 1920.329] Initializing built-in extension X-Resource Were 1920.331] Initializing built-in extension XVideo Were 1920.332] Initializing built-in extension XVideo-MotionCompensation Were 1920.332] Initializing built-in extension ITSELFree86-VidModeExtension Were 1920.333] Initializing built-in extension ITSELFree86-DGA Were 1920.355] Initializing built-in extension ITSELFree86-DRI Were 1920.357] Initializing built-in extension DRI2 Were 1920.357] (II) "glx" will be loaded by default. Were 1920.357] (II) LoadModule: "dri2" Were 1920.357] (II) Module "dri2" already built-in Were 1920.357] (II) LoadModule: "glamoregl" Were 1920.357] (II) Loading /usr/lib/xorg/modules/libglamoreglddso Were 1920.360] (II) Module glamoregl: vendor equals "XddOrg Foundation" Were 1920.361] compiled for 1.14.2, module version equals 0.5.1 Were 1920.361] ABI class: XddOrg ANSI C Emulation, version 0.4 Were 1920.361] (II) LoadModule: "glx" Were 1920.361] (II) Loading /usr/lib/xorg/modules/extensions/libglxddso Were 1920.362] (II) Module glx: vendor equals "XddOrg Foundation" Were 1920.362] compiled for 1.14.3, module version equals 1.0.0 Were 1920.362] ABI class: XddOrg Server Extension, version 7.0 Were 1920.362] (equals equals were AIGLX enabled Were 1920.366] Loading extension GLX Were 1920.366] (equals equals were Matched vboxvideo as autoconfigured driver 0 Were 1920.366] (equals equals were Matched vesa as autoconfigured driver 1 Were 1920.366] (equals equals were Matched modesetting as autoconfigured driver 2 Were 1920.366] (equals equals were Matched fbdev as autoconfigured driver 3 Were 1920.366] (equals equals were Assigned the driver to the xf86;ConfigLayout Were 1920.366] (II) LoadModule: "vboxvideo" Were 1920.367] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideoddso Were 1920.367] (II) Module vboxvideo: vendor equals "Oracle Corporation" Were 1920.367] compiled for 10.6.99, module version equals 1.0.1 Were 1920.367] Module class: XddOrg Video Driver Were 1920.367] ABI class: XddOrg Video Driver, version 14.1 Were 1920.367] (**were Load address of symbol "VBOXVIDEO" is 0x7f69de77b380 Were 1920.367] (II) LoadModule: "vesa" Were 1920.367] (II) Loading /usr/lib/xorg/modules/drivers/vesaoundrvddso Were 1920.367] (II) Module vesa: vendor equals "XddOrg Foundation" Were 1920.367] compiled for 1.14.0, module version equals 2.3.2 Were 1920.367] Module class: XddOrg Video Driver Were 1920.367] ABI class: XddOrg Video Driver, version 14.1 Were 1920.367] (II) LoadModule: "modesetting" Were 1920.368] (II) Loading /usr/lib/xorg/modules/drivers/modesettingoundrvddso Were 1920.368] (II) Module modesetting: vendor equals "XddOrg Foundation" Were 1920.368] compiled for 1.14.1, module version equals 0.8.0 Were 1920.368] Module class: XddOrg Video Driver Were 1920.368] ABI class: XddOrg Video Driver, version 14.1 Were 1920.368] (II) LoadModule: "fbdev" Were 1920.368] (II) Loading /usr/lib/xorg/modules/drivers/fbdevoundrvddso Were 1920.368] (II) Module fbdev: vendor equals "XddOrg Foundation" Were 1920.368] compiled for 1.14.3, module version equals 0.4.4 Were 1920.368] Module class: XddOrg Video Driver Were 1920.368] ABI class: XddOrg Video Driver, version 14.1 Were 1920.368] (II) VBoxVideo: guest driver for VirtualBox: vbox Were 1920.368] (II) VESA: driver for VESA chipsets: vesa Were 1920.368] (II) modesetting: Driver for Modesetting Kernel Drivers: kms Were 1920.368] (II) FBDEV: driver for framebuffer: fbdev Were 1920.368] (plus plus were using VT number 3 Were 1920.368] (WW) Falling back to old probe method for vesa Were 1920.368] (WW) Falling back to old probe method for modesetting Were 1920.368] (WW) Falling back to old probe method for fbdev Were 1920.368] (II) Loading sub module "fbdevhw" Were 1920.368] (II) LoadModule: "fbdevhw" Were 1920.369] (II) Loading /usr/lib/xorg/modules/libfbdevhwddso Were 1920.369] (II) Module fbdevhw: vendor equals "XddOrg Foundation" Were 1920.369] compiled for 1.14.3, module version equals 0.0.2 Were 1920.369] ABI class: XddOrg Video Driver, version 14.1 Were 1920.369] (II) VBoxVideogg0): VirtualBox guest additions video driver version 4.2.18.OSE Were 1920.369] (II) Loading sub module "ramdac" Were 1920.369] (II) LoadModule: "ramdac" Were 1920.369] (II) Module "ramdac" already built-in Were 1920.369] (II) Loading sub module "fb" Were 1920.369] (II) LoadModule: "fb" Were 1920.371] (II) Loading /usr/lib/xorg/modules/libfbddso Were 1920.371] (II) Module fb: vendor equals "XddOrg Foundation" Were 1920.371] compiled for 1.14.3, module version equals 1.0.0 Were 1920.371] ABI class: XddOrg ANSI C Emulation, version 0.4 Were 1920.371] (II) Loading sub module "shadowfb" Were 1920.371] (II) LoadModule: "shadowfb" Were 1920.372] (II) Loading /usr/lib/xorg/modules/libshadowfbddso Were 1920.372] (II) Module shadowfb: vendor equals "XddOrg Foundation" Were 1920.372] compiled for 1.14.3, module version equals 1.0.0 Were 1920.372] ABI class: XddOrg ANSI C Emulation, version 0.4 Were 1920.372] (II) Loading sub module "vgahw" Were 1920.372] (II) LoadModule: "vgahw" Were 1920.372] (II) Loading /usr/lib/xorg/modules/libvgahwddso Were 1920.372] (II) Module vgahw: vendor equals "XddOrg Foundation" Were 1920.372] compiled for 1.14.3, module version equals 0.1.0 Were 1920.372] ABI class: XddOrg Video Driver, version 14.1 Were 1920.372] (II) Loading sub module "dri" Were 1920.372] (II) LoadModule: "dri" Were 1920.372] (II) Module "dri" already built-in Were 1920.378] (II) VBoxVideogg0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/cb Were 1920.379] (equals equals were VBoxVideogg0): Depth 24, (-) framebuffer bpp 32 Were 1920.379] (-) VBoxVideogg0): Virtual size is 32000x32000 (pitch 32000) Were 1920.379] (**were VBoxVideogg0): Built-in mode "VBoxInitialMode": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz Were 1920.379] (II) VBoxVideogg0): Modeline "VBoxInitialMode"x0.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz but) Were 1920.379] (**were VBoxVideogg0): Built-in mode "VBoxDynamicMode": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz Were 1920.379] (II) VBoxVideogg0): Modeline "VBoxDynamicMode"x0.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz but) Were 1920.379] (**were VBoxVideogg0): Built-in mode "VBoxDynamicMode": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz Were 1920.379] (II) VBoxVideogg0): Modeline "VBoxDynamicMode"x0.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz but) Were 1920.379] (**were VBoxVideogg0): Built-in mode "VBox-1600x1200": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz Were 1920.379] (II) VBoxVideogg0): Modeline "VBox-1600x1200"x0.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz but) Were 1920.379] (**were VBoxVideogg0): Built-in mode "VBox-1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz Were 1920.379] (II) VBoxVideogg0): Modeline "VBox-1440x1050"x0.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz but) Were 1920.379] (**were VBoxVideogg0): Built-in mode "VBox-1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz Were 1920.379] (II) VBoxVideogg0): Modeline "VBox-1280x960"x0.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz but) Were 1920.379] (**were VBoxVideogg0): Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz Were 1920.379] (II) VBoxVideogg0): Modeline "VBox-1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz but) Were 1920.379] (**were VBoxVideogg0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz Were 1920.379] (II) VBoxVideogg0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz but) Were 1920.379] (**were VBoxVideogg0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz Were 1920.379] (II) VBoxVideogg0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz but) Were 1920.379] (II) VBoxVideogg0): vgaHWGetIOBase: hwp-greater-than IOBase is 0x03d0 Were 1920.379] (equals equals were VBoxVideogg0): RGB weight 888 Were 1920.379] (equals equals were VBoxVideogg0): Default visual is TrueColor Were 1920.379] (equals equals were VBoxVideogg0): Using gamma correction (1.0, 1.0, 1.0) Were 1920.379] (equals equals were VBoxVideogg0): DPI set to (96, 96) Were 1920.379] (II) UnloadModule: "vesa" Were 1920.379] (II) Unloading vesa Were 1920.379] (II) UnloadModule: "modesetting" Were 1920.379] (II) Unloading modesetting Were 1920.379] (II) UnloadModule: "fbdev" Were 1920.379] (II) Unloading fbdev Were 1920.379] (II) UnloadSubModule: "fbdevhw" Were 1920.379] (II) Unloading fbdevhw Were 1920.379] (-) Depth 24 pixmap format is 32 bpp Were 1920.398] drmOpenDevice: node name is /dev/dri/card0 Were 1920.398] drmOpenDevice: open result is 12, (OK) Were 1920.399] drmOpenDevice: node name is /dev/dri/card0 Were 1920.399] drmOpenDevice: open result is 12, (OK) Were 1920.399] drmOpenByBusid: Searching for BusID pcicc0000:00:02.0 Were 1920.399] drmOpenDevice: node name is /dev/dri/card0 Were 1920.399] drmOpenDevice: open result is 12, (OK) Were 1920.399] drmOpenByBusid: drmOpenMinor returns 12 Were 1920.399] drmOpenByBusid: Interface 1.4 failed, trying 11 Were 1920.399] drmOpenByBusid: drmGetBusid reports pcicc0000:00:02.0 Were 1920.399] (II) [drm] DRM interface version 1.0 Were 1920.399] (EE) [drm] Could not set DRM device bus ID. Were 1920.399] (EE) VBoxVideogg0): DRIScreenInit failed, disabling DRI. Were 1920.399] (II) VBoxVideogg0): visual configurations initialized Were 1920.400] (II) VBoxVideogg0): Requested monitor count: 1 Were 1920.400] (II) VBoxVideogg0): Output VBOX0 has no monitor section Were 1920.400] (II) VBoxVideogg0): Output VBOX0 has no monitor section Were 1920.402] (II) VBoxVideogg0): EDID for output VBOX0 Were 1920.402] (II) VBoxVideogg0): Manufacturer: VBX Model: 0 Serial#: 78644800 Were 1920.402] (II) VBoxVideogg0): Year: 1990 Week: 1 Were 1920.403] (II) VBoxVideogg0): EDID Version: 1.3 Were 1920.403] (II) VBoxVideogg0): Digital Display Input Were 1920.403] (II) VBoxVideogg0): Indeterminate output size Were 1920.403] (II) VBoxVideogg0): Gamma: 2.20 Were 1920.403] (II) VBoxVideogg0): DPMS capabilities: StandBy Suspend Off Were 1920.403] (II) VBoxVideogg0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 Were 1920.403] (II) VBoxVideogg0): Default color space is primary color space Were 1920.403] (II) VBoxVideogg0): First detailed timing is preferred mode Were 1920.403] (II) VBoxVideogg0): redX: 0.640 redally: 0.330 greenX: 0.300 greenally: 0.600 Were 1920.403] (II) VBoxVideogg0): blueX: 0.150 blueally: 0.060 whiteX: 0.312 whiteally: 0.329 Were 1920.403] (II) VBoxVideogg0): Manufacturer's mask: 0 Were 1920.403] (II) VBoxVideogg0): Supported detailed timing: Were 1920.403] (II) VBoxVideogg0): clock: 116.2 MHz Image Size: 0 x 0 mm Were 1920.403] (II) VBoxVideogg0): hactive: 1600 hlessync: 1602 hlessyncend 1604 hblankend 1606 hborder: 0 Were 1920.403] (II) VBoxVideogg0): vactive: 1200 vlessync: 1202 vlessyncend 1204 vblanking: 1206 vborder: 0 Were 1920.403] (II) VBoxVideogg0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz Were 1920.403] (II) VBoxVideogg0): Monitor name: VBOX monitor Were 1920.403] (II) VBoxVideogg0): EDID (in hex): Were 1920.403] (II) VBoxVideogg0): 00f!!!fffff00585800004006b004 Were 1920.403] (II) VBoxVideogg0): 0100010380000078eeee91a3544c99 26 Were 1920.403] (II) VBoxVideogg0): 0f5054000000010101010101010101 01 Were 1920.403] (II) VBoxVideogg0): 010101010101652d400660b0064002 02 Were 1920.403] (II) VBoxVideogg0): 2200000000000000000000fd0000c8 00 Were 1920.403] (II) VBoxVideogg0): c864000a202020202020000000fc00 56 Were 1920.403] (II) VBoxVideogg0): 424f58206d6f6e69746f720a000000 10 Were 1920.403] (II) VBoxVideogg0): 000a20202020202020202020202000 17 Were 1920.404] (II) VBoxVideogg0): Printing probed modes for output VBOX0 Were 1920.405] (II) VBoxVideogg0): Modeline "1600x1200"x60.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz Pb) Were 1920.405] (II) VBoxVideogg0): Modeline "1440x1050"x60.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz but) Were 1920.405] (II) VBoxVideogg0): Modeline "1280x960"x60.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz but) Were 1920.405] (II) VBoxVideogg0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz but) Were 1920.405] (II) VBoxVideogg0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz but) Were 1920.405] (II) VBoxVideogg0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz but) Were 1920.405] (II) VBoxVideogg0): Output VBOX0 connected Were 1920.405] (II) VBoxVideogg0): Using exact sizes for initial modes Were 1920.405] (II) VBoxVideogg0): Output VBOX0 using initial mode 1600x1200 Were 1920.405] (II) VBoxVideogg0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. Were 1920.405] (II) VBoxVideogg0): RandR 1.2 enabled, ignore the following RandR disabled message. Were 1920.407] (equals equals were VBoxVideogg0): DPMS enabled Were 1920.407] (-) RandR disabled Were 1920.416] (II) AIGLX: Screen 0 is not DRI2 capable Were 1920.416] (II) AIGLX: Screen 0 is not DRI capable Were 1920.451] (II) AIGLX: Loaded and initialized swrast Were 1920.451] (II) GLX: Initialized DRISWRAST GL provider for screen 0 Were 1920.451] (II) VBoxVideogg0): Setting screen physical size to 423 x 317 Were 1920.697] (II) config/udev: Adding input device Power Button (/dev/input/eventbled) Were 1920.698] (**were Power Button: Applying InputClass "evdev keyboard catchall" Were 1920.698] (II) LoadModule: "evdev" Were 1920.698] (II) Loading /usr/lib/xorg/modules/input/evdevoundrvddso Were 1920.698] (II) Module evdev: vendor equals "XddOrg Foundation" Were 1920.698] compiled for 1.14.2, module version equals 2.8.1 Were 1920.698] Module class: XddOrg XInput Driver Were 1920.698] ABI class: XddOrg XInput driver, version 19.1 Were 1920.698] (II) Using input driver 'evdev' for 'Power Button' Were 1920.698] (**were Power Button: always reports core events Were 1920.698] (**were evdev: Power Button: Device: "/dev/input/eventbled" Were 1920.698] (-) evdev: Power Button: Vendor 0 Product 0x1 Were 1920.698] (-) evdev: Power Button: Found keys Were 1920.698] (II) evdev: Power Button: Configuring as keyboard Were 1920.698] (**were Option "configinfo" "udevcc/sys/devices/LNXSYSTMCCBLEJJ/LNXPWRBNCCBLEJJ/INPUT/INPUTBL ED/ENCEVENTBLED" Were 1920.698] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) Were 1920.698] (**were Option "xkbrules" "evdev" Were 1920.698] (**were Option "xkbmodel" "pc104" Were 1920.699] (**were Option "xkblayout" "us" Were 1920.745] (II) config/udev: Adding input device Sleep Button (/dev/input/event5) Were 1920.745] (**were Sleep Button: Applying InputClass "evdev keyboard catchall" Were 1920.745] (II) Using input driver 'evdev' for 'Sleep Button' Were 1920.745] (**were Sleep Button: always reports core events Were 1920.746] (**were evdev: Sleep Button: Device: "/dev/input/event5" Were 1920.746] (-) evdev: Sleep Button: Vendor 0 Product 0x3 Were 1920.746] (-) evdev: Sleep Button: Found keys Were 1920.746] (II) evdev: Sleep Button: Configuring as keyboard Were 1920.746] (**were Option "configinfo" "udevcc/sys/devices/LNXSYSTMCCBLEJJ/LNXSLPBNCCBLEJJ/INPUT/INPUTBL EE/ENCEVENT5" Were 1920.746] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7) Were 1920.746] (**were Option "xkbrules" "evdev" Were 1920.746] (**were Option "xkbmodel" "pc104" Were 1920.746] (**were Option "xkblayout" "us" Were 1920.747] (II) config/udev: Adding drm device (/dev/dri/card0) Were 1920.747] (II) itselfree86: Adding drm device (/dev/dri/card0) Were 1920.748] setversion 1.4 failed Were 1920.748] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event3) Were 1920.748] (**were VirtualBox mouse integration: Applying InputClass "evdev pointer catchall" Were 1920.748] (II) Using input driver 'evdev' for 'VirtualBox mouse integration' Were 1920.748] (**were VirtualBox mouse integration: always reports core events Were 1920.748] (**were evdev: VirtualBox mouse integration: Device: "/dev/input/event3" Were 1920.748] (-) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe Were 1920.748] (-) evdev: VirtualBox mouse integration: Found 1 mouse buttons Were 1920.748] (-) evdev: VirtualBox mouse integration: Found absolute axes Were 1920.748] (-) evdev: VirtualBox mouse integration: Found x and y absolute axes Were 1920.748] (-) evdev: VirtualBox mouse integration: Found absolute touchscreen Were 1920.748] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen Were 1920.749] (**were evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5 Were 1920.749] (**were evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 Were 1920.749] (**were Option "configinfo" "udevcc/sys/devices/pci0000:00/jjjjccjjccjdj/input/inputblec/ence vent3" Were 1920.749] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 8) Were 1920.749] (II) evdev: VirtualBox mouse integration: initialized for absolute axes. Were 1920.749] (**were VirtualBox mouse integration: (accel) keeping acceleration scheme 1 Were 1920.749] (**were VirtualBox mouse integration: (accel) acceleration profile 0 Were 1920.749] (**were VirtualBox mouse integration: (accel) acceleration factor: 2.000 Were 1920.749] (**were VirtualBox mouse integration: (accel) acceleration threshold: 4 Were 1920.749] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1) Were 1920.749] (II) No input driver specified, ignoring this device. Were 1920.749] (II) This device may have been added with another device file. Were 1920.751] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event1) Were 1920.751] (**were VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall" Were 1920.751] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet' Were 1920.751] (**were VirtualBox USB Tablet: always reports core events Were 1920.751] (**were evdev: VirtualBox USB Tablet: Device: "/dev/input/event1" Were 1920.751] (-) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21 Were 1920.751] (-) evdev: VirtualBox USB Tablet: Found 9 mouse buttons Were 1920.751] (-) evdev: VirtualBox USB Tablet: Found scroll wheel(s) Were 1920.751] (-) evdev: VirtualBox USB Tablet: Found relative axes Were 1920.751] (-) evdev: VirtualBox USB Tablet: Found absolute axes Were 1920.751] (-) evdev: VirtualBox USB Tablet: Found x and y absolute axes Were 1920.751] (-) evdev: VirtualBox USB Tablet: Found absolute touchscreen Were 1920.751] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen Were 1920.751] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support Were 1920.751] (**were evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5 Were 1920.751] (**were evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 Were 1920.752] (**were Option "configinfo" "udevcc/sys/devices/pci0000:00/jjjjccjjccjfj/usbblea/a-a/a-accaj/ input/inputblea/encevent1" Were 1920.752] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 9) Were 1920.752] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes. Were 1920.752] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes. Were 1920.752] (**were VirtualBox USB Tablet: (accel) keeping acceleration scheme 1 Were 1920.752] (**were VirtualBox USB Tablet: (accel) acceleration profile 0 Were 1920.752] (**were VirtualBox USB Tablet: (accel) acceleration factor: 2.000 Were 1920.752] (**were VirtualBox USB Tablet: (accel) acceleration threshold: 4 Were 1920.752] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0) Were 1920.752] (II) No input driver specified, ignoring this device. Were 1920.752] (II) This device may have been added with another device file. Were 1920.753] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0) Were 1920.753] (II) No input driver specified, ignoring this device. Were 1920.753] (II) This device may have been added with another device file. Were 1920.753] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) Were 1920.753] (**were AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" Were 1920.753] (II) Using input driver 'evdev' for 'At Translated Set 2 keyboard' Were 1920.753] (**were AT Translated Set 2 keyboard: always reports core events Were 1920.753] (**were evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" Were 1920.753] (-) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 Were 1920.753] (-) evdev: AT Translated Set 2 keyboard: Found keys Were 1920.753] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard Were 1920.753] (**were Option "configinfo" "udevcc/sys/devices/platform/iblehjdb/serioblej/input/inputblej/e ncevent0" Were 1920.753] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10) Were 1920.753] (**were Option "xkbrules" "evdev" Were 1920.753] (**were Option "xkbmodel" "pc104" Were 1920.753] (**were Option "xkblayout" "us" Were 1920.754] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event7) Were 1920.754] (**were ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall" Were 1920.754] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse' Were 1920.754] (**were ImExPS/2 Generic Explorer Mouse: always reports core events Were 1920.754] (**were evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event7" Were 1920.754] (-) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6 Were 1920.754] (-) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons Were 1920.754] (-) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s) Were 1920.754] (-) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes Were 1920.754] (-) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes Were 1920.754] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse Were 1920.754] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support Were 1920.754] (**were evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5 Were 1920.754] (**were evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 Were 1920.754] (**were Option "configinfo" "udevcc/sys/devices/platform/iblehjdb/serioblea/input/inputbleg/e ncevent7" Were 1920.754] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11) Were 1920.754] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes. Were 1920.754] (**were ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1 Were 1920.755] (**were ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0 Were 1920.755] (**were ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000 Were 1920.755] (**were ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4 Were 1920.755] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse1) Were 1920.755] (II) No input driver specified, ignoring this device. Were 1920.755] (II) This device may have been added with another device file. Were 1920.755] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) Were 1920.755] (II) No input driver specified, ignoring this device. Were 1920.755] (II) This device may have been added with another device file. Were 1920.756] (II) config/udev: Adding input device Speakup (/dev/input/event2) Were 1920.756] (**were Speakup: Applying InputClass "evdev keyboard catchall" Were 1920.756] (II) Using input driver 'evdev' for 'Speakup' Were 1920.756] (**were Speakup: always reports core events Were 1920.756] (**were evdev: Speakup: Device: "/dev/input/event2" Were 1920.756] (-) evdev: Speakup: Vendor 0 Product 0 Were 1920.756] (-) evdev: Speakup: Found keys Were 1920.756] (II) evdev: Speakup: Configuring as keyboard Were 1920.756] (**were Option "configinfo" "udevcc/sys/devices/virtual/input/inputbleb/encevent2" Were 1920.756] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD, id 12) Were 1920.756] (**were Option "xkbrules" "evdev" Were 1920.756] (**were Option "xkbmodel" "pc104" Were 1920.756] (**were Option "xkblayout" "us" Were 2080.295] (II) VBoxVideogg0): Requested monitor count: 1 Were 2080.303] (II) VBoxVideogg0): EDID vendor "VBX", prod id 0 Were 2080.303] (II) VBoxVideogg0): DDCModeFromDetailedTiming: 1600x1200 Warning: We only handle separate sync. Were 2080.303] (II) VBoxVideogg0): Using hsync ranges from config file Were 2080.303] (II) VBoxVideogg0): Using vrefresh ranges from config file Were 2080.303] (II) VBoxVideogg0): Printing DDC gathered Modelines: Were 2080.303] (II) VBoxVideogg0): Modeline "1600x1200"x0.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 comhsync comvsync (72.4 kHz eP) I have an Intel soundcard and graphic card.

1 0

Re: [arch-general] Gnome and Arch Issues Under VirtualBox
by Alex Jordan 29 Sep '13

29 Sep '13

On Sep 29, 2013 12:32 PM, "Hunter Jozwiak" <potbelliedjazz(a)aol.com> wrote: > > I went into the directory /etc/skel/ and have erased the comment lines off of exect gnome-session It's really unclear what you're trying to do here. Please be more specific.

1 0

[arch-general] Two things: TODO-list orphans in [community] and switching over to git
by Alexander Rødseth 29 Sep '13

29 Sep '13

Hi, --- Orphans --- In connection with the newly created TODO lists for rebuilds of packages formerly maintained by people that are no longer involved with Arch Linux, I wondered if there would be any objections if I moved the following packages from [community] to AUR: (They are currently unneeded orphans, ref https://www.archlinux.org/devel/reports/unneeded-orphans/) abe aircrack-ng archlinux-artwork archlinux-lxdm-theme bchunk bpython bpython2 cdck cherrytree cmus consonance ekg ekg2 fdupes fssos-nsvs ginac gkrellm gnome-themes-extras lastfmsubmitd libcgns2 luarocks lxinput lxlauncher lxmusic lxshortcut mpdscribble obkey openclonk openocd perlbrew pkgtools pypy3 python2-basemap python2-mpi4py python2-pyproj python2-virtkey python-apsw python-basemap python-bsddb python-html5lib python-mpi4py python-pyproj python-virtkey smokeping synaptiks tremulous v8 vim-buftabs vobcopy wqy-microhei-lite xdelta xdelta3 zsync Several, but not all of these, are on the newly created TODO-lists. All of them are "unneeded orphans" (https://www.archlinux.org/devel/reports/unneeded-orphans/) If you wish to adopt one of these, just reply to this email (or adopt it). Objections to moving them should preferrably also lead to someone adopting the orphans. --- Git --- As I gather, we all like git better than svn, for a long list of reasons. Are there any objections to switching over from svn to git as repositories for the official packages? Yes, this can not be done in a heartbeat. The tools and documentation needs to be updated and the workflow needs to be tested, but are there objections to starting the transition process? -- Best regards, Alexander Rødseth xyproto / TU

4 5

[arch-general] Gnome and Arch Issues Under VirtualBox
by Hunter Jozwiak 29 Sep '13

29 Sep '13

Hi guys: I've installed Gnome and I don't really want to run it from the GDM. So, I went into the directory /etc/skel/ and have erased the comment lines off of exect gnome-session. When I type startx, and press alt+F2 to run and type Orca, nothing seems to happen. Also, I have the VirtualBox guest utilities and have loaded all the modules. Is there an issue here with VirtualBox that I am not aware of?

1 0

[arch-general] glibc 2.18-5 question
by LANGLOIS Olivier PIS -EXT 27 Sep '13

27 Sep '13

Hi, I just checked what was the motivation for this 5th release and I have found: http://hmarco.org/bugs/CVE-2013-4788.html where it says: The vulnerability is caused due to the non initialization to a random value (it is always zero) of the "pointer guard" by the glibc only when generating static compiled executables. Dynamic executables are not affected. Pointer guard is used to mangle the content of sensible pointers (longjmp, signal handlers, etc.), if the pointer guard value is zero (non-initialized) then it is not effective. So, out of curiosity, how big is the threat since I am under the impression that almost 100% if not 100% of Arch binaries uses libc.so Greetings, Olivier ________________________________ CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium.

5 8

[arch-general] Donate to Arch Linux
by Michael Düll 27 Sep '13

27 Sep '13

Hi everyone! As far as I can see, there's only one option for non-US-citizens to donate money to the project. This one option is a credit card [1]. As you may or may not be aware: Most (european) german citizens do not possess and wish not possess a credit card and in some cases are not able to possess a credit card. Are other donation options planned in the future? How soon? I would even send an envelope with €urobills in it via AirMail, though I'd prefer something more secure like Bitcoin or (I know many see it as the devil) PayPal. tl,dr: I want to send money to Arch Linux, but can't. [1] http://i.imgur.com/dOFg0DE.png Yours all, Michael Düll

7 10

[arch-general] Issue with systemd --user services
by John Smith 26 Sep '13

26 Sep '13

Hello, I'm having problems with starting 'mpd' as a user service: $ systemctl --user status mpd mpd.service - Music Player Daemon Loaded: loaded (/home/me/.config/systemd/user/mpd.service; enabled) Active: inactive (dead) However it works without any problems when started manually: $ systemctl --user start mpd $ systemctl --user status mpd mpd.service - Music Player Daemon Loaded: loaded (/home/me/.config/systemd/user/mpd.service; enabled) Active: active (running) since Wed 2013-09-25 22:10:36 BST; 5s ago Main PID: 709 (mpd) CGroup: /user.slice/user-1000.slice/user(a)1000.service/mpd.service └─709 /usr/bin/mpd --stdout --no-daemon /home/me/.config/mpd/mpdconf Sep 25 22:10:36 XXX systemd[233]: Starting Music Player Daemon... Sep 25 22:10:36 XXX systemd[233]: Started Music Player Daemon. It's a fresh Arch install so it's unlikely that I messed something up. So far, in regrads to systemd I followed wiki [1] enabling autologin, fixed 'pam' and added some environmental variables to user session as per [2]. Any idea why this may be happening? [1] https://wiki.archlinux.org/index.php/Automatic_login_to_virtual_console [2] https://archlinux.org/index.php/Systemd/User

4 3

[arch-general] Wayland Support in Gnome 3.10
by kristof 25 Sep '13

25 Sep '13

I'm not entirely savvy with all the details but from my understanding, GNOME 3.10 will be featuring a Wayland tech preview, meaning that it can (optionally?) use the wayland protocol to manage graphics and windows and all that fun stuff. Are we going to compile this support by default? Does anyone know how and if we'll be able to switch back and forth between Xorg and Wayland?

4 4