February 2026 - Aur-general - lists.archlinux.org

Very old AUR account recovery
by Katie Bohnenkamper 22 Feb '26

22 Feb '26

Hello! I'm trying to gain access to an AUR account I haven't touched in years: KittyKatt (email: kittykatt(a)archlinux.us) The "Forgot password" page directed me to send a message here if I couldn't remember my username or email. That's not exactly the case, but hopefully I can get help here anyways. Unfortunately that email address has been dead for probably close to 6-7 years so there is no way for me to recover this by normal means. Is there any way to gain access back into this account or any way I can verify my identity? Thank you, Katie

2 1

Internal Server Error in AUR while trying to login
by Javier Tia 19 Feb '26

19 Feb '26

Hi, Today I have been unable to log in to AUR because of this error: 500 - Internal Server Error A fatal error has occurred. Details have been logged and will be reviewed by the postmaster posthaste. We apologize for any inconvenience this may have caused. It was working yesterday. I have checked this Arch Linux forum and the several arch-general mailing lists for any reported issues, but I have not seen any. Thanks, » Javier Tia ✍

3 2

Package Maintainer Application - Jonathan Grotelüschen
by tippfehlr 18 Feb '26

18 Feb '26

Hi everyone, I’m Jonathan, also known as tippfehlr. I am a computer science student at KIT in Karlsruhe, Germany, and I hereby apply to become a Package Maintainer. My Linux journey began with a Raspberry Pi 1B I received as a gift in 2017. After that, I hosted a few Minecraft servers on Linux Mint (though not on the 1B). A few years later, I did an internship in a company using openSUSE, but one person used Arch Linux and Neovim and impressed me a lot at the time. In 2021, I started using an old laptop for school and installed 32-bit Debian on it, but quickly switched to Arch Linux when I discovered it was a 64-bit CPU. With the experience I had from my laptop, I finally installed Arch on my PC in 2022. I had installed Manjaro before, but Arch was the first distro that replaced Windows for me. Since then, it always just worked. When I got a new laptop, Arch was simply the easiest thing to install. I started contributing to the AUR in late 2023, when I needed an INAV related package that was not yet available. Since then, I learned a lot about packaging and about the Arch community in general. A few years ago I also started self-hosting services for my family and realized that I enjoy the Sysadmin and DevOps side of software a lot. I mostly used Docker Compose until now, but I would like to learn more. So if there is need, I’d like to help there as well. Generally, I love tinkering and configuring, which probably isn’t surprising in this community. Just recently, I annoyed my brother because I ended up modding a game instead of actually playing it with him :) Outside the digital world, I love to play the Cello and like to read fantasy. I am also active in my local community: In my dorm, I lead the 3d-printing lab and volunteer in the network department, where we are currently doing a big Wi-Fi upgrade. We also maintain an Arch Linux mirror at https://files.hadiko.de/pub/dists/arch/! Since a friend in school introduced me to FPV drones, I also like to tinker with/fly my model airplane. If you want to take a look, most of my personal projects and contributions to other projects are on Codeberg [1] or on GitHub [2]. Over time, I collected a list of packages I use and would like to maintain in the official repositories: Development tools: - git-extras - dockerfile-language-server - emmet-language-server - dprint RC Flight: - betaflight-configurator - inav-configurator Games: - heroic-games-launcher - modrinth-app - osu-lazer Misc: - jellyfin-desktop (was jellyfin-media-player) - pfetch-rs I’m using Neovim without Mason and usually install language servers with pacman. I took some time to look through packages with only one maintainer and noticed a few language servers (for example arduino- and typescript-language-server) where I’d be happy to help out as a co-maintainer. My application is sponsored by Christian Heusel (gromit) and Peter Jung (ptr1337). Thanks for the nice talk and all the feedback so far! Best, Jonathan Grotelüschen [1] https://codeberg.org/tippfehlr [2] https://github.com/tippfehlr AUR: https://aur.archlinux.org/packages?O=0&SeB=M&K=tippfehlr&outdated=&SB=p&SO=…

5 5

Temporarily suspend matthewq337 user
by Michał 18 Feb '26

18 Feb '26

Hello, I've seen this user squats many packages dropped which are either dropped to AUR or abandoned, and then adds other people who are actually interested in said packages to co-maintainers. I've had this happen to me with 3 packages, which are also mentioned in examples list below. In the past few months I have seen this user push various nonsense commits to many packages. Some examples are: ruby-rails (and dependencies) where only pkgver was bumped, without testing any build. This resulted in build failures for simple reasons such as missing files: https://aur.archlinux.org/cgit/aur.git/commit/?h=ruby-actionview&id=a98abc6… https://aur.archlinux.org/packages/ruby-actionview#comment-1019144 pyload-ng, pushing changes without pulling first and other nonsense "updated" commits without testing also visible in git log https://aur.archlinux.org/cgit/aur.git/commit/?h=pyload-ng&id=c91cc2cb90daa… librewolf-hg, package "fixed" which resulted in pkgbuild being unusable https://aur.archlinux.org/packages/librewolf-hg#comment-981229 python-dukpy, changing license file name from right to wrong which prevented install: https://aur.archlinux.org/cgit/aur.git/commit/?h=python-dukpy&id=2ddc02e9fa… https://aur.archlinux.org/cgit/aur.git/commit/?h=python-dukpy&id=9d7aab0205… python-glfw, bumping pkgver, but this did not actually result in new version being built: https://aur.archlinux.org/cgit/aur.git/tree/PKGBUILD?h=python-glfw#n13 These examples are not from malice or anything, but from not testing changes and incompetence. "Let him who is without sin cast the first stone", but I think that such over such long period of time (~6 months at least) mistakes in packaging without seemingly any improvement show that matthewq337 doesn't care about state of packages. I am therefore calling for moderator action, to prevent this from happening so that Matthew can reflect. Kind regards, micwoj92

5 7

Invisible pkgbase "radicle" prevents pushing — database intervention needed?
by Ivan Shapovalov 15 Feb '26

15 Feb '26

Hi, I am trying to push a pkgbase `radicle` consisting of one pkgname `radicle-node` (with the intention of subsequently asking the maintainer of `radicle-cli` to merge). There is no package `radicle` or `radicle-node` visible in the search or via direct URLs: https://aur.archlinux.org/pkgbase/radicle -> 404 https://aur.archlinux.org/packages/radicle -> 404 https://aur.archlinux.org/packages/radicle-node -> 404 However, I am unable to push `radicle` via Git: ``` $ git remote add origin https://aur.archlinux.org/radicle $ git push -u origin master To aur.archlinux.org:radicle ! [rejected] master -> master (fetch first) error: failed to push some refs to 'aur.archlinux.org:radicle' hint: Updates were rejected because the remote contains work that you do not hint: have locally. This is usually caused by another repository pushing to hint: the same ref. If you want to integrate the remote changes, use hint: 'git pull' before pushing again. hint: See the 'Note about fast-forwards' in 'git push --help' for details. ``` The PKGBUILD on the AUR server under this repo is severely out of date. Would it be possible for AUR admins to manually clean up this repo, so that I could push the package I intend to maintain? Thanks, -- Ivan Shapovalov / intelfx /

3 3

makepkg - Debug Package
by Björn Försterling 14 Feb '26

14 Feb '26

Hello, when creating and installing a custom package with `makepkg -i -c` how can I prevent that a "*-debug-*" package will be created and installed? I could not find any related information in `man 5 PKGBUILD` or `makepkg -h`. Regards Björn

3 2

Packaging a fork with different name
by Zen 13 Feb '26

13 Feb '26

Hi! I am trying to package [librempeg](https://github.com/librempeg/librempeg) which is a fork of ffmpeg and is supposed to be a drop-in replacement to it. In PKGBUILD, provides, depends are all the same and I added "conflicts=('ffmpeg')". How do I make other packages use the new package (librempeg-git) as ffmpeg? Build works but installation fails with: ``` looking for conflicting packages... :: librempeg-git-r124983.f986adf-1 and ffmpeg-2:8.0.1-5 are in conflict. Remove ffmpeg? [y/N] y error: failed to prepare transaction (could not satisfy dependencies) :: removing ffmpeg breaks dependency 'ffmpeg' required by ffmpegthumbs :: removing ffmpeg breaks dependency 'ffmpeg' required by firefox:: removing ffmpeg breaks dependency 'ffmpeg' required by freerdp ``` Thanks! Zentropivity

3 3

Is there any guideline for different packages with conflicting names?
by Fermín Olaiz 09 Feb '26

09 Feb '26

Hey there! I'm reaching out because I didn't find any reference to the topic in the wiki [1] or in the discussion page. I'm making a package around an app called Thrive [2], but I found that there is already a completely different package with the same name. For the package I'm making there's an app and a cli version, so I'm guessing in this case they could perfectly be named `thrive-app` and `thrive-cli`. In any case, with a growing number of packages in the AUR, it would be reasonable to think this kind of things will happen more frequently. Is there any guideline or ideas for this? Should a discussion (maybe RFC) be started? Thanks! Fermín Olaiz. [1] https://wiki.archlinux.org/title/Arch_package_guidelines#Package_naming [2] https://github.com/horia141/thrive

3 2

Problem connecting to AUR via SSH (User: Venik1821)
by Venik 01 Feb '26

01 Feb '26

Hello, I'm having trouble connecting to the Arch User Repository (AUR) via SSH to manage my packages. I generated a new key pair, ED25519, verified that all local permissions are correct, and gradually added the public key to my profile on the AUR website (User: Venik1821). However, I keep getting the error "Permission denied (public key)" when connecting using the "ssh aur" command. I've already performed all the standard troubleshooting steps (checking permissions, using IdentitiesOnly, regenerating keys, verifying the public/private key integrity). Below is the full debug output of the 'ssh -vvv aur' command: debug1: OpenSSH_10.2p1, OpenSSL 3.6.1 27 Jan 2026 debug3: Running on Linux 6.18.7-x64v2-xanmod1 #0~20260123.g58e1b7b SMP PREEMPT_DYNAMIC Fri Jan 23 16:28:56 UT C x86_64 debug3: Started with: ssh -vvv aur debug1: Reading configuration data /home/venik/.ssh/config debug1: /home/venik/.ssh/config line 1: Applying options for aur debug1: Reading configuration data /etc/ssh/ssh_config debug3: /etc/ssh/ssh_config line 2: Including file /etc/ssh/ssh_config.d/20-systemd-ssh-proxy.conf depth 0 debug1: Reading configuration data /etc/ssh/ssh_config.d/20-systemd-ssh-proxy.conf debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/venik/.ssh/known_hosts' debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/venik/.ssh/known_hosts2' debug2: resolving "aur.archlinux.org" port 22 debug3: resolve_host: lookup aur.archlinux.org:22 debug3: channel_clear_timeouts: clearing debug3: ssh_connect_direct: entering debug1: Connecting to aur.archlinux.org [209.126.35.78] port 22. debug3: set_sock_tos: set socket 3 IP_TOS 0xb8 debug1: Connection established. debug1: loaded pubkey from /home/venik/.ssh/id_aur: ED25519 SHA256:7EMZei8mAP4DgvB2YVKd7hO9tB6H5ZD+Vd/TzWeLwC Q debug1: identity file /home/venik/.ssh/id_aur type 2 debug1: no identity pubkey loaded from /home/venik/.ssh/id_aur debug1: Local version string SSH-2.0-OpenSSH_10.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_10.2 debug1: compat_banner: match: OpenSSH_10.2 pat OpenSSH* compat 0x04000000 debug2: fd 3 setting O_NONBLOCK debug1: Authenticating to aur.archlinux.org:22 as 'Venik1821' debug3: record_hostkey: found key type RSA in file /home/venik/.ssh/known_hosts:2 debug3: record_hostkey: found key type ECDSA in file /home/venik/.ssh/known_hosts:4 debug3: record_hostkey: found key type ED25519 in file /home/venik/.ssh/known_hosts:6 debug3: load_hostkeys_file: loaded 3 keys from aur.archlinux.org debug1: load_hostkeys: fopen /home/venik/.ssh/known_hosts2: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory debug3: order_hostkeyalgs: have matching best-preference key type ssh-ed25519-cert-v01(a)openssh.com, using Hos tkeyAlgorithms verbatim debug3: send packet: type 20 debug1: SSH2_MSG_KEXINIT sent debug3: receive packet: type 20 debug1: SSH2_MSG_KEXINIT received debug2: local client KEXINIT proposal debug2: KEX algorithms: mlkem768x25519-sha256,sntrup761x25519-sha512, sntrup761x25519-sha512(a)openssh.com,curve 25519-sha256,curve25519-sha256(a)libssh.org ,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hel lman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14 -sha256,ext-info-c,kex-strict-c-v00(a)openssh.com debug2: host key algorithms: ssh-ed25519-cert-v01(a)openssh.com, ecdsa-sha2-nistp256-cert-v01(a)openssh.com,ecdsa- sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com ,sk-ssh-ed25519-cert-v01(a)openssh.c om,sk-ecdsa-sha2-nistp256-cert-v01(a)openssh.com, rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openss h.com ,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ssh-ed25519(a)openssh.com,sk-e cdsa-sha2-nistp256(a)openssh.com,rsa-sha2-512,rsa-sha2-256 debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-gcm@openssh.com, aes256-gcm(a)openssh.com,aes128-ctr, aes192-ctr,aes256-ctr debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-gcm@openssh.com, aes256-gcm(a)openssh.com,aes128-ctr, aes192-ctr,aes256-ctr debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com, hmac-sha2-256-etm(a)openssh.com,hmac-sha2-5 12-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com, umac-128(a)openssh.com,hmac-sha2-256,hmac-sha2 -512,hmac-sha1 debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com, hmac-sha2-256-etm(a)openssh.com,hmac-sha2-5 12-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com, umac-128(a)openssh.com,hmac-sha2-256,hmac-sha2 -512,hmac-sha1 debug2: compression ctos: none,zlib(a)openssh.com debug2: compression stoc: none,zlib(a)openssh.com debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug2: peer server KEXINIT proposal debug2: KEX algorithms: mlkem768x25519-sha256,sntrup761x25519-sha512, sntrup761x25519-sha512(a)openssh.com,curve 25519-sha256,curve25519-sha256(a)libssh.org ,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,ext-info-s ,kex-strict-s-v00(a)openssh.com debug2: host key algorithms: rsa-sha2-512,rsa-sha2-256,ecdsa-sha2-nistp256,ssh-ed25519 debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-gcm@openssh.com, aes256-gcm(a)openssh.com,aes128-ctr, aes192-ctr,aes256-ctr debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-gcm@openssh.com, aes256-gcm(a)openssh.com,aes128-ctr, aes192-ctr,aes256-ctr debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com, hmac-sha2-256-etm(a)openssh.com,hmac-sha2-5 12-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com, umac-128(a)openssh.com,hmac-sha2-256,hmac-sha2 -512,hmac-sha1 debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com, hmac-sha2-256-etm(a)openssh.com,hmac-sha2-5 12-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com, umac-128(a)openssh.com,hmac-sha2-256,hmac-sha2 -512,hmac-sha1 debug2: compression ctos: none,zlib(a)openssh.com debug2: compression stoc: none,zlib(a)openssh.com debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug3: kex_choose_conf: will use strict KEX ordering debug1: kex: algorithm: mlkem768x25519-sha256 debug1: kex: host key algorithm: ssh-ed25519 debug1: kex: server->client cipher: chacha20-poly1305(a)openssh.com MAC: <implicit> compression: none debug1: kex: client->server cipher: chacha20-poly1305(a)openssh.com MAC: <implicit> compression: none debug3: send packet: type 30 debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug3: receive packet: type 31 debug1: SSH2_MSG_KEX_ECDH_REPLY received debug1: Server host key: ssh-ed25519 SHA256:RFzBCUItH9LZS0cKB5UE6ceAYhBD5C8GeOBip8Z11+4 debug3: record_hostkey: found key type RSA in file /home/venik/.ssh/known_hosts:2 debug3: record_hostkey: found key type ECDSA in file /home/venik/.ssh/known_hosts:4 debug3: record_hostkey: found key type ED25519 in file /home/venik/.ssh/known_hosts:6 debug3: load_hostkeys_file: loaded 3 keys from aur.archlinux.org debug1: load_hostkeys: fopen /home/venik/.ssh/known_hosts2: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory debug1: Host 'aur.archlinux.org' is known and matches the ED25519 host key. debug1: Found key in /home/venik/.ssh/known_hosts:6 debug3: send packet: type 21 debug1: ssh_packet_send2_wrapped: resetting send seqnr 3 debug2: ssh_set_newkeys: mode 1 debug1: rekey out after 134217728 blocks debug1: SSH2_MSG_NEWKEYS sent debug1: Sending SSH2_MSG_EXT_INFO debug3: send packet: type 7 debug1: expecting SSH2_MSG_NEWKEYS debug3: receive packet: type 21 debug1: ssh_packet_read_poll2: resetting read seqnr 3 debug1: SSH2_MSG_NEWKEYS received debug2: ssh_set_newkeys: mode 0 debug1: rekey in after 134217728 blocks debug2: KEX algorithms: mlkem768x25519-sha256,sntrup761x25519-sha512, sntrup761x25519-sha512(a)openssh.com,curve 25519-sha256,curve25519-sha256(a)libssh.org ,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hel lman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14 -sha256,ext-info-c,kex-strict-c-v00(a)openssh.com debug2: host key algorithms: ssh-ed25519-cert-v01(a)openssh.com, ecdsa-sha2-nistp256-cert-v01(a)openssh.com,ecdsa- sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com ,sk-ssh-ed25519-cert-v01(a)openssh.c om,sk-ecdsa-sha2-nistp256-cert-v01(a)openssh.com, rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openss h.com ,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ssh-ed25519(a)openssh.com,sk-e cdsa-sha2-nistp256(a)openssh.com,rsa-sha2-512,rsa-sha2-256 debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-gcm@openssh.com, aes256-gcm(a)openssh.com,aes128-ctr, aes192-ctr,aes256-ctr debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-gcm@openssh.com, aes256-gcm(a)openssh.com,aes128-ctr, aes192-ctr,aes256-ctr debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com, hmac-sha2-256-etm(a)openssh.com,hmac-sha2-5 12-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com, umac-128(a)openssh.com,hmac-sha2-256,hmac-sha2 -512,hmac-sha1 debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com, hmac-sha2-256-etm(a)openssh.com,hmac-sha2-5 12-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com, umac-128(a)openssh.com,hmac-sha2-256,hmac-sha2 -512,hmac-sha1 debug2: compression ctos: none,zlib(a)openssh.com debug2: compression stoc: none,zlib(a)openssh.com debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug3: send packet: type 5 debug3: receive packet: type 7 debug1: SSH2_MSG_EXT_INFO received debug3: kex_input_ext_info: extension server-sig-algs debug1: kex_ext_info_client_parse: server-sig-algs=<ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa -sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com ,rsa-sha2-512,rsa-sha2-256> debug3: kex_input_ext_info: extension publickey-hostbound(a)openssh.com debug1: kex_ext_info_check_ver: publickey-hostbound(a)openssh.com=<0> debug3: kex_input_ext_info: extension ping(a)openssh.com debug1: kex_ext_info_check_ver: ping(a)openssh.com=<0> debug3: receive packet: type 6 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug3: send packet: type 50 debug3: receive packet: type 7 debug1: SSH2_MSG_EXT_INFO received debug3: kex_input_ext_info: extension server-sig-algs debug1: kex_ext_info_client_parse: server-sig-algs=<ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa -sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com ,rsa-sha2-512,rsa-sha2-256> debug3: receive packet: type 51 debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug3: ssh_get_authentication_socket_path: path '/home/venik/.ssh/agent/s.6aEaxAqYZx.agent.bSN50DTxCl' debug1: get_agent_identities: bound agent to hostkey debug1: get_agent_identities: ssh_fetch_identitylist: agent contains no identities debug1: Will attempt key: /home/venik/.ssh/id_aur ED25519 SHA256:7EMZei8mAP4DgvB2YVKd7hO9tB6H5ZD+Vd/TzWeLwCQ explicit debug2: pubkey_prepare: done debug1: Offering public key: /home/venik/.ssh/id_aur ED25519 SHA256:7EMZei8mAP4DgvB2YVKd7hO9tB6H5ZD+Vd/TzWeLw CQ explicit debug3: send packet: type 50 debug2: we sent a publickey packet, wait for reply debug3: receive packet: type 51 debug1: Authentications that can continue: publickey debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Venik1821(a)aur.archlinux.org: Permission denied (publickey).

2 1