- Arch-general - lists.archlinux.org

[arch-general] Svntogit looks broken
by Armin K. 27 Feb '13

27 Feb '13

Hi, are there any problems with Archlinux' svntogit? Latest changes are shown from ~22 hours ago.

1 0

[arch-general] watchdog 5.13 changes
by Thomas Bächler 27 Feb '13

27 Feb '13

The new watchdog 5.13 package removes the rc.d scripts and conf.d files. There is a systemd service file for watchdog included. There is no service file for wd_keepalive, because the functionality of wd_keepalive is provided by systemd - just uncomment RuntimeWatchdogSec=20 in /etc/systemd/system.conf.

1 0

[arch-general] rEFInd 0.6.4 + linux 3.7.2-1 fail to boot
by André Vitor de Lima Matos 27 Feb '13

27 Feb '13

Hi, everyone. I've a HP Pavilion g4 machine with UEFI, using rEFInd. After a upgraded to refind-efi 0.6.4-1 and linux 3.7.2-1, my system stopped to boot. rEFInd loads properly, and others boot options, like EFI Shell and Windows 8 are working, but trying to boot kernel 3.7.2 froze on the message in begin saying "Starting vmlinuz-linux ...kernel options". initrd was built correctly. This issue only occurs with linux 3.7.2, downgrading to 3.7.1 makes system bootable again (from where I'm writing). rEFInd config file is basically default, only with timeout changed to 5. My boot options: root=/dev/AndreSYS/Arch resume=/dev/AndreSYS/Swap cryptdevice=/dev/disk/by-uuid/e38e188e-f775-41fe-9607-ce977c7716d8:syslvm ro add_efi_memmap rootfstype=ext4 -- https://profiles.google.com/andre.vmatos

7 15

Re: [arch-general] rEFInd 0.6.4 + linux 3.7.2-1 fail to boot
by John Briggs 27 Feb '13

27 Feb '13

On Tue, Feb 26, 2013 at 09:15:08AM +0100, Max Löwen wrote: > On 02/26/2013 12:17 AM, Kazuo Teramoto wrote: > >On 25 Feb 2013 at 18:13:14 -0300, André Vitor de Lima Matos wrote: > >>I can't boot with 3.8-2 again!! linux 3.8-1 is working fine > >For me it stopped to boot after > 3.7.7. Linux-3.7.7 is the last version > >that boot, each version after it don't. Gummiboot stopped to boot in > >v22, only v17 boots for me. > > > >When I choose the arch entry in the boot loader and it become freeze at > >the boot loader screen. > > > >The interaction of bootable and kernel/gummiboot versions is a mess on > >my system. The versions I cannot boot from form a dense set! I always > >bring an arch livecd with me (my UEFI mobo wont boot from USB). > > > >Currently I'm busy so I don't have time to debug it. As I don't see > >anyone talking about boot problems I'm blaming my Samsung laptop. I hope > >to have some time to debug and put the blame in someone else... > > > >Regards, > >Kazuo Teramoto > If you want to avoid to use the livecd, you could install a second > kernel, like from repo-ck and have it as an altrenative bootoption > (I also have problems with some kernels here, there is allready a > thread on that topic). The only problems I have experienced with rEFInd occurred when the new system files weren't being copied correctly to EFI/arch directory. Once I overcame that problem it has worked fine. John

1 0

[arch-general] Suggestions wanted: nvidia + nouveau in AUR PKGBUILD
by Oon-Ee Ng 27 Feb '13

27 Feb '13

I'm an nvidia user who finally decided to try out nouveau and currently have it working, but want to keep nvidia installed just-in-case. I also maintain nvidia-beta/lib32-nvidia-utils-beta/nvidia-utils-beta in the AUR. As far as I can see, keeping both nouveau and nvidia installed and usable is not difficult, especially with the new mesa split PKGBUILD. Basically I only need the following symlinks (may be a bit different from current:- 1. /usr/lib/libGL.so -> libGL.so.1 2. /usr/lib/libGL.so.1 -> libGL.so.1.2.0 OR libGL.so.313.18 3. /usr/lib/libGL.so.1.2.0 -> mesa-libGL.so.1.2.0 4. /usr/lib32/libGL.so -> libGL.so.1 5. /usr/lib32/libGL.so.1 -> libGL.so.1.2.0 OR libGL.so.313.18 6. /usr/lib32/libGL.so.1.2.0 -> mesa-libGL.so.1.2.0 7. /usr/lib/xorg/modules/extensions/libglx.so -> libglx.xorg OR libglx.so.313.18 I also need to blacklist nouveau (or remove the blacklist) for modprobe, currently done in /usr/lib/modprobe.d/nvidia.conf A few questions:- 1. The 'best' way I can figure is that all symlinks would be owned by a fake {lib32-}mesa-libgl-nvidia package. Only symlink 2, 5, and 7 above need changing when 'switching'. This would require manually running a script to change (followed by a reboot). The script can also fix the blacklist. 1a. Can the blacklist be fixed by renaming the file to not end with .conf or must it be moved out of /usr/lib/modprobe.d? 2. Alternatively, is there a way to get my bootloader to blacklist modules (modprobe.blacklist=nouveau or nouveau.blacklist=true as shown in [1]?) AND run a script which would 'fix' the symlinks before KMS? This would be preferable (and lower-maintenance for me) if possible. [1] - http://www.funtoo.org/wiki/Create_a_boot_option_for_easy_nvidia_or_nouveau_…

2 1

[arch-general] XDG variables no longer set
by Robbie Smith 26 Feb '13

26 Feb '13

For some reason, after my last reboot (a kernel update), none of the XDG variables[1] (such as $XDG_CONFIG_HOME) are being set, which broke a lot of my configuration, as I rely on those in scripts. I was able to fix it by writing a script[2] to drop in /etc/profile.d/ that would create those directories and export the variables as required, but what I want to know is why they broke in the first place. Has anyone else experienced this? Robbie [1] http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html#vari… [2] Like this (taken from /etc/xdg/xfce4/xinitrc) : #!/bin/sh # $XDG_CONFIG_HOME defines the base directory relative to which # user specific configuration files should be stored. If # $XDG_CONFIG_HOME is either not set or empty, a default equal to # $HOME/.config should be used. if test "x$XDG_CONFIG_HOME" = "x" ; then XDG_CONFIG_HOME=$HOME/.config export XDG_CONFIG_HOME fi [ -d "$XDG_CONFIG_HOME" ] || mkdir "$XDG_CONFIG_HOME"

4 5

[arch-general] Set terminus as a system font
by jugree＠lavabit.com 26 Feb '13

26 Feb '13

Hello. I installed Terminus from a source tarball and successfully set it as a console font (in /etc/vconsole.conf). How can I set it as a default system-wide monospace font? I've found this tutorial: http://orford.org/gtk/#fonts, but it doesn't explain how to use several fonts (is it possible?). The needed files (eg: ter-x16b.pcf.gz) are located in /usr/local/share/fonts. If the above is not possible, I'd like to enable it in Xterm and Emacs. I tried to set it in Xterm, but it didn't work out: $ xset +fp /usr/local/share/fonts/terminus (I also added this one to .xinitrc.) $ cd /usr/local/share/fonts/ $ mkfontscale $ mkfontdir .Xdefaults: XTerm*faceName: Terminus XTerm:faceSize: 16 or XTerm*faceName: ter-x16n or $ xterm -fn '-*-terminus-medium-*-*-*-16-*-*-*-*-*-*-*' also xorg.conf: Section "Files" FontPath "/usr/local/share/fonts/terminus" EndSection

3 2

Re: [arch-general] [arch-dev-public] linux-3.8.0-1 / wifi problem
by Genes Lists 26 Feb '13

26 Feb '13

On 02/25/2013 01:14 PM, Lukas Jirkovsky wrote: > On 25 February 2013 17:27, Pierre Schmitz <pierre(a)archlinux.de> wrote: >> >> Just a quick note as I cannot debug this atm. Updating from 3.7 to 3.8 >> breaks wireless connections on my netbook. The relevant message in the >> journal seems to be "kernel: wlan: capabilities/regulatory prevented >> using AP HT/VHT configuration, downgraded". > > I actually see this from time to time with Intel card too when using > 3.8. But I usually get connected after a few attempts. > I have troubles with some routers (enterprise cisco in my case, tho others like linksys work fine so far). In my case, I find the interface gets disconnected. Retrying may succeed - or may fail - if it fails - i reload the driver and it starts working again - i am using iwlwifi (intel N 6300 (rev 35)). Disabling and re-enabling wireless via KDE plasmoid is the simplest fix. I too see many messages like above: Feb 26 10:13:46 lap3 NetworkManager[504]: <info> (wlan0): supplicant interface state: disconnected -> scanning Feb 26 10:13:46 lap3 kernel: [42931.771953] wlan0: deauthenticating from 04:fe:7f:49:71:dd by local choice (reason=2) Feb 26 10:13:46 lap3 kernel: [42931.777211] wlan0: authenticate with 1c:aa:07:f4:cd:f3 Feb 26 10:13:46 lap3 kernel: [42931.781025] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded Feb 26 10:13:46 lap3 kernel: [42931.826366] wlan0: direct probe to 1c:aa:07:f4:cd:f3 (try 1/3) Gene/

1 0

[arch-general] mysqld (MySQL and MariaDB) polling
by Christian Hesse 26 Feb '13

26 Feb '13

Hello everybody, based on the thread "[RFC] Migration to MariaDB" in arch-dev-public by Bartłomiej Piotrowski I started playing with MySQL and MariaDB. I noticed both were polling every second: <... futex resumed> ) = -1 ETIMEDOUT (Connection timed out) futex(0x1d48050, FUTEX_WAKE_PRIVATE, 1) = 0 gettimeofday({1361806174, 246573}, NULL) = 0 futex(0x1d4808c, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 2849, {1361806175, 246573000}, ffffffff <unfinished ...> Searching Google I found that the problem may be caused by the leap second, though the load is not as high as some articles describe. (Continues polling vs. one poll a second.) However the polling stops as soon as I manually set the time with date -s and it start again if I run ntpdate to sync the time. As this is a notebook I rebooted more than once since the leap second happened. ;) What is going on? This is a mobile system, so it would be great to get rid of mysqld eating my battery power. -- main(a){char*c=/* Schoene Gruesse */"B?IJj;MEH" "CX:;",b;for(a/* Chris get my mail address: */=0;b=c[a++];) putchar(b-1/(/* gcc -o sig sig.c && ./sig */b/42*2-3)*42);}

3 2

[arch-general] error setting up webdav
by Not To Miss 26 Feb '13

26 Feb '13

Hi, I followed the wiki https://wiki.archlinux.org/index.php/WebDAV#Server_.28Apache.29 exactly to setup webdav. After I restart the httpd.service, and cadaver test gave me error: $ cadaver http://localhost/dav Could not access /dav/ (not WebDAV-enabled?): 405 Method Not Allowed Connection to `localhost' closed. dav:!> ^CTerminated by signal 2. Here is the log from /var/log/httpd/127.0.0.1-access_log: ::1 - - [25/Feb/2013:23:32:07 -0700] "OPTIONS /dav/ HTTP/1.1" 200 - ::1 - - [25/Feb/2013:23:32:07 -0700] "PROPFIND /dav/ HTTP/1.1" 405 979 nothing special is reported in error_log. Anyone has anyone ideas what's wrong? I'd really appreciate any help. Thanks! Zech

1 0