- Arch-general - lists.archlinux.org

[arch-general] arch-security: CVE and ASA wiki logging
by G. Schlisio 17 Jan '17

17 Jan '17

Hi all, I appreciate the service of our valued Arch CVE Monitoring Team a lot. Since new year there are no more CVEs and ASAs logged on the respective Wiki pages [0] and [1], although ASAs are (thankfully!) still issued to arch-security. Is there a reason for discontinuing logging to the well-known wiki pages e.g. did logging move to another location, or is the security team in need of help keeping up with the work? Please let us know! Thankyou in advance Georg [0] https://wiki.archlinux.org/index.php/CVE [1] https://wiki.archlinux.org/index.php/Security_Advisories

4 4

[arch-general] uwsgi-2.0.14-15 segfaults with php plugin
by David Runge 17 Jan '17

17 Jan '17

Hey all, ran into the issue, that after updating from uwsgi 2.0.14-1 to uwsgi 2.0.14-5 (php plugin of the same version), all php based webapps make uwsgi segfault (tested with wordpress and stikked)! Something like the below will happen (including after reboot): Jan 17 16:24:20 frqrec systemd[1]: Starting uWSGI service unit... Jan 17 16:24:20 frqrec uwsgi[2370]: [uWSGI] getting INI configuration from /etc/uwsgi/wordpress.ini Jan 17 16:24:20 frqrec uwsgi[2370]: *** Starting uWSGI 2.0.14 (64bit) on [Tue Jan 17 16:24:20 2017] *** Jan 17 16:24:20 frqrec uwsgi[2370]: compiled with version: 6.3.1 20170109 on 10 January 2017 00:34:54 Jan 17 16:24:20 frqrec uwsgi[2370]: os: Linux-4.8.13-1-ARCH #1 SMP PREEMPT Fri Dec 9 07:24:34 CET 2016 Jan 17 16:24:20 frqrec uwsgi[2370]: nodename: frqrec Jan 17 16:24:20 frqrec uwsgi[2370]: machine: x86_64 Jan 17 16:24:20 frqrec uwsgi[2370]: clock source: unix Jan 17 16:24:20 frqrec uwsgi[2370]: pcre jit disabled Jan 17 16:24:20 frqrec uwsgi[2370]: detected number of CPU cores: 2 Jan 17 16:24:20 frqrec uwsgi[2370]: current working directory: / Jan 17 16:24:20 frqrec uwsgi[2370]: detected binary path: /usr/bin/uwsgi Jan 17 16:24:20 frqrec uwsgi[2370]: setgid() to 33 Jan 17 16:24:20 frqrec uwsgi[2370]: setuid() to 33 Jan 17 16:24:20 frqrec uwsgi[2370]: your processes number limit is 15780 Jan 17 16:24:20 frqrec uwsgi[2370]: your memory page size is 4096 bytes Jan 17 16:24:20 frqrec uwsgi[2370]: detected max file descriptor number: 1024 Jan 17 16:24:20 frqrec uwsgi[2370]: lock engine: pthread robust mutexes Jan 17 16:24:20 frqrec uwsgi[2370]: thunder lock: disabled (you can enable it with --thunder-lock) Jan 17 16:24:20 frqrec uwsgi[2370]: *** Cache "wordpress" initialized: 64MB (key: 2136 bytes, keys: 2136000 bytes, data: 65536000 bytes, bitmap: 0 bytes) preallocated *** Jan 17 16:24:20 frqrec uwsgi[2370]: - SystemD socket activation detected - Jan 17 16:24:20 frqrec uwsgi[2370]: uwsgi socket 1 attached to UNIX address /run/uwsgi/wordpress.sock fd 3 Jan 17 16:24:20 frqrec uwsgi[2370]: !!! uWSGI process 2370 got Segmentation Fault !!! Jan 17 16:24:20 frqrec uwsgi[2370]: *** backtrace of 2370 *** Jan 17 16:24:20 frqrec uwsgi[2370]: /usr/bin/uwsgi(uwsgi_backtrace+0x2c) [0x466eec] Jan 17 16:24:20 frqrec uwsgi[2370]: /usr/bin/uwsgi(uwsgi_segfault+0x21) [0x4672b1] Jan 17 16:24:20 frqrec uwsgi[2370]: /usr/lib/libc.so.6(+0x330b0) [0x7f9a019ea0b0] Jan 17 16:24:20 frqrec uwsgi[2370]: /usr/lib/uwsgi/php_plugin.so(+0x53ca) [0x7f9a001fa3ca] Jan 17 16:24:20 frqrec uwsgi[2370]: *** end of backtrace *** Jan 17 16:24:20 frqrec systemd[1]: uwsgi-private(a)wordpress.service: Main process exited, code=exited, status=1/FAILURE Jan 17 16:24:20 frqrec systemd[1]: Failed to start uWSGI service unit. Jan 17 16:24:20 frqrec systemd[1]: uwsgi-private(a)wordpress.service: Unit entered failed state. Jan 17 16:24:20 frqrec systemd[1]: uwsgi-private(a)wordpress.service: Failed with result 'exit-code'. Reverting back to uwsgi 2.0.14-1 fixes the problem (after restarting the socket, that activates the webapp). As a sidenote: I'm using the hardening and socket activation options as explained here, which shouldn't have much of an effect on the uwsgi itself though): https://wiki.archlinux.org/index.php/UWSGI#Socket_activation https://wiki.archlinux.org/index.php/UWSGI#Hardening_uWSGI Has anyone had the same issue? I can't seem to find out, what has changed between revision 1 and 5 or if it needs another rebuild. Best, David -- https://sleepmap.de

2 2

Re: [arch-general] Old wine and intel graphics problem
by eerozeteen . 17 Jan '17

17 Jan '17

Date: Sun, 15 Jan 2017 14:35:42 +0100 From: LoneVVolf >>No one has tested LI2 interlude with a version past 1.5.0, but that doesn't mean it will fail with later versions . >> Just try running it with latest wine, there's a big chance it will work. No one has tested, because game fail to start without any output in terminal. Of course winedebug += all shows wall of text, but i didnt see any hook to move forward. I wrote on server forum, that people play on ubuntu (with 1.5.0) as well. But i dont know what kind of graphics card they are using. So this is a reason, that im trying run game on 1.5.0. I know that problem can be in libgcrypt or something like that. There is a lot workarounds to steam with this error. Can downgrade libgcrypt help with it? How far you should go back? But i know that isnt safe. Regards eerozeteen

1 0

[arch-general] is pam setup for samba
by niya levi 16 Jan '17

16 Jan '17

hi everyone i have installed and configured samba on my laptop, i see samba has installed a file in pam.d, do i need to do any further configuration to authenticate domain users using pam ? shadrock

2 1

[arch-general] Old wine and intel graphics problem
by eerozeteen . 15 Jan '17

15 Jan '17

Hello, Im trying to run Lineage2 Interlude on my laptop (processor Intel Core i5-560M with integrated intel graphics) via Wine [1]. 1.5.0 is the last wine version where people can run Lineage2 Interlude. Im used playonlinux to create prefix with 1.5.0 and try to run a game. Unfortunately playonlinux debug utility shows problem with libGL: libGL error: unable to load driver: i965_dri.so libGL error: driver pointer missing libGL error: failed to load driver: i965 libGL error: unable to load driver: i965_dri.so libGL error: driver pointer missing libGL error: failed to load driver: i965 libGL error: unable to load driver: swrast_dri.so libGL error: failed to load driver: swrast I googling a lot, but every solution has a reference to Steam problem and dont works on my problem. Where can be problem? Drivers? Incompatibility old wine with system or graphics? Im tried run this same on different laptop (older then my, and with intel graphics too), and have same problem. Maybe is any workaround to make it work? [1] - https://appdb.winehq.org/objectManager.php?sClass=version&iId=9115 Regards eerozeteen

2 1

Re: [arch-general] linux driver bcm4311 failure
by message 14 Jan '17

14 Jan '17

On 2017-01-02 20:04, Arend van Spriel wrote: > On 02-01-17 15:33, message wrote: >> On 2016-12-30 19:46, message wrote: >>> On 2016-09-17 08:11, message wrote: >>>> On 2016-09-09 07:57, Arend Van Spriel wrote: >>>>> >>>>> The device is claimed by b43-pci-bridge so I would suggest: >>>>> >>>>> blacklist b43-pci-bridge >>>>> >> >> The wifi card indicator now appears to start after computer switch on >> (twice in a row now!) >> >> Neither networkmanager or wicd are accepting the password. >> >> Even: >> >> wicd-cli --wireless -c [wifihotspotname] >> done! >> >> is false and internet access not found. >> >> wpa_supplicant continues to report 'conn_failed' error. >> >> Connection to same network is successful using debian on chromebook >> (crouton) > > I am confused by all your messages. In the previous one you did a > 'modprobe b43'. So what driver do you intend to use here. b43 is not a > driver maintained by broadcom. You should ask for help on the b43 > mailing list [1] if you want to use that driver. > > Regards, > Arend > > [1] http://lists.infradead.org/mailman/listinfo/b43-dev After system upgrade, wifi card fails to be recognised. For the benefit of other users: save your time and avoid broadcom products; they are terrible.

1 0

Re: [arch-general] btrfs raid 10 fileserver with ata errors
by niya levi 14 Jan '17

14 Jan '17

> after some googling it's been suggested that it's either a hard drive, > the sata controller or the sata cables. > how do i go about diagnosing and fixing the problem, > any suggestions or guidance would be appreciated. > shadrock > I've had this problem before. IIRC, you can match up the ata17.00 with what drive it's talking about by looking at your kernel boot messages. The first thing I would do is switch out the SATA cable and see if the problem persists. If that doesn't work, run a scan of the drive using the manufacturers scan program. > hi everyone these are the following tests i've tried and the results journalctl -f | grep ata Jan 13 12:37:13 maybel kernel: ata17.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 13 12:37:13 maybel kernel: ata17.00: failed command: READ DMA EXT Jan 13 12:37:13 maybel kernel: ata17.00: cmd 25/00:00:00:24:7d/00:07:1a:00:00/e0 tag 13 dma 917504 in Jan 13 12:37:13 maybel kernel: ata17.00: status: { DRDY } Jan 13 12:37:13 maybel kernel: ata17: hard resetting link Jan 13 12:37:13 maybel kernel: ata17: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jan 13 12:37:13 maybel kernel: ata17.00: configured for UDMA/33 Jan 13 12:37:13 maybel kernel: ata17: EH complete Jan 13 12:37:45 maybel kernel: ata17.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 13 12:37:45 maybel kernel: ata17.00: failed command: READ DMA EXT Jan 13 12:37:45 maybel kernel: ata17.00: cmd 25/00:00:00:d9:7d/00:07:1a:00:00/e0 tag 25 dma 917504 in Jan 13 12:37:45 maybel kernel: ata17.00: status: { DRDY } Jan 13 12:37:45 maybel kernel: ata17: hard resetting link Jan 13 12:37:46 maybel kernel: ata17: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jan 13 12:37:46 maybel kernel: ata17.00: configured for UDMA/33 Jan 13 12:37:46 maybel kernel: ata17: EH complete Jan 13 12:38:19 maybel kernel: ata17.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 13 12:38:19 maybel kernel: ata17.00: failed command: READ DMA EXT Jan 13 12:38:19 maybel kernel: ata17.00: cmd 25/00:00:80:d6:81/00:06:1a:00:00/e0 tag 1 dma 786432 in Jan 13 12:38:19 maybel kernel: ata17.00: status: { DRDY } Jan 13 12:38:19 maybel kernel: ata17: hard resetting link Jan 13 12:38:20 maybel kernel: ata17: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jan 13 12:38:20 maybel kernel: ata17.00: configured for UDMA/33 Jan 13 12:38:20 maybel kernel: ata17: EH complete Jan 13 12:38:52 maybel kernel: ata17.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 13 12:38:52 maybel kernel: ata17.00: failed command: READ DMA EXT Jan 13 12:38:52 maybel kernel: ata17.00: cmd 25/00:80:80:d1:82/00:05:1a:00:00/e0 tag 28 dma 720896 in Jan 13 12:38:52 maybel kernel: ata17.00: status: { DRDY } Jan 13 12:38:52 maybel kernel: ata17: hard resetting link Jan 13 12:38:52 maybel kernel: ata17: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jan 13 12:38:52 maybel kernel: ata17.00: configured for UDMA/33 Jan 13 12:38:52 maybel kernel: ata17: EH complete Jan 13 12:39:24 maybel kernel: ata17.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 13 12:39:24 maybel kernel: ata17.00: failed command: READ DMA EXT Jan 13 12:39:24 maybel kernel: ata17.00: cmd 25/00:00:00:9d:84/00:05:1a:00:00/e0 tag 1 dma 655360 in Jan 13 12:39:24 maybel kernel: ata17.00: status: { DRDY } Jan 13 12:39:24 maybel kernel: ata17: hard resetting link Jan 13 12:39:25 maybel kernel: ata17: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jan 13 12:39:25 maybel kernel: ata17.00: configured for UDMA/33 Jan 13 12:39:25 maybel kernel: ata17: EH complete Jan 13 12:39:57 maybel kernel: ata17.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 13 12:39:57 maybel kernel: ata17.00: failed command: READ DMA EXT Jan 13 12:39:57 maybel kernel: ata17.00: cmd 25/00:00:80:b8:85/00:05:1a:00:00/e0 tag 6 dma 655360 in Jan 13 12:39:57 maybel kernel: ata17.00: status: { DRDY } Jan 13 12:39:57 maybel kernel: ata17: hard resetting link Jan 13 12:39:57 maybel kernel: ata17: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jan 13 12:39:57 maybel kernel: ata17.00: configured for UDMA/33 Jan 13 12:39:57 maybel kernel: ata17: EH complete Jan 13 12:40:29 maybel kernel: ata17.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 13 12:40:29 maybel kernel: ata17.00: failed command: READ DMA EXT Jan 13 12:40:29 maybel kernel: ata17.00: cmd 25/00:80:80:cd:85/00:05:1a:00:00/e0 tag 16 dma 720896 in Jan 13 12:40:29 maybel kernel: ata17.00: status: { DRDY } Jan 13 12:40:29 maybel kernel: ata17: hard resetting link Jan 13 12:40:30 maybel kernel: ata17: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jan 13 12:40:30 maybel kernel: ata17.00: configured for UDMA/33 Jan 13 12:40:30 maybel kernel: ata17: EH complete Jan 13 12:41:02 maybel kernel: ata17.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Jan 13 12:41:02 maybel kernel: ata17.00: failed command: READ DMA EXT Jan 13 12:41:02 maybel kernel: ata17.00: cmd 25/00:80:80:f2:85/00:05:1a:00:00/e0 tag 16 dma 720896 in Jan 13 12:41:02 maybel kernel: ata17.00: status: { DRDY } Jan 13 12:41:02 maybel kernel: ata17: hard resetting link Jan 13 12:41:02 maybel kernel: ata17: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Jan 13 12:41:02 maybel kernel: ata17.00: configured for UDMA/33 Jan 13 12:41:02 maybel kernel: ata17: EH complete ^C ======================================================================================================= [alarm@maybel ~]$ ls -l /sys/block/ | grep sd. lrwxrwxrwx 1 root root 0 Jan 9 14:21 sda -> ../devices/pci0000:00/0000:00:05.0/ata1/host0/target0:0:0/0:0:0:0/block/sda lrwxrwxrwx 1 root root 0 Jan 9 14:26 sdb -> ../devices/pci0000:00/0000:00:0c.0/0000:02:00.0/ata13/host12/target12:0:0/12:0:0:0/block/sdb lrwxrwxrwx 1 root root 0 Jan 9 14:26 sdc -> ../devices/pci0000:00/0000:00:0c.0/0000:02:00.0/ata14/host13/target13:0:0/13:0:0:0/block/sdc lrwxrwxrwx 1 root root 0 Jan 9 14:26 sdd -> ../devices/pci0000:00/0000:00:0c.0/0000:02:00.0/ata15/host14/target14:0:0/14:0:0:0/block/sdd lrwxrwxrwx 1 root root 0 Jan 9 14:26 sde -> ../devices/pci0000:00/0000:00:0c.0/0000:02:00.0/ata16/host15/target15:0:0/15:0:0:0/block/sde lrwxrwxrwx 1 root root 0 Jan 9 14:26 sdf -> ../devices/pci0000:00/0000:00:0d.0/0000:03:00.0/ata17/host16/target16:0:0/16:0:0:0/block/sdf lrwxrwxrwx 1 root root 0 Jan 9 14:26 sdg -> ../devices/pci0000:00/0000:00:0d.0/0000:03:00.0/ata18/host17/target17:0:0/17:0:0:0/block/sdg lrwxrwxrwx 1 root root 0 Jan 10 02:43 sdh -> ../devices/pci0000:00/0000:00:02.1/usb1/1-6/1-6:1.0/host20/target20:0:0/20:0:0:0/block/sdh ======================================================================================================= sudo smartctl -i /dev/sdf smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.13-1-ARCH] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HITACHI HUA722010ALA330 Serial Number: N136GXML LU WWN Device Id: 5 000cca 39ced38c2 Firmware Version: JP4ONA00 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Fri Jan 13 12:59:51 2017 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled ======================================================================================================= sudo smartctl -t short /dev/sdf smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.13-1-ARCH] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 1 minutes for test to complete. Test will complete after Fri Jan 13 13:31:48 2017 Use smartctl -X to abort test. ======================================================================================================= sudo smartctl -a /dev/sdf smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.13-1-ARCH] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HITACHI HUA722010ALA330 Serial Number: N136GXML LU WWN Device Id: 5 000cca 39ced38c2 Firmware Version: JP4ONA00 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Fri Jan 13 13:34:00 2017 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 9929) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 166) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 91 3 Spin_Up_Time 0x0007 130 130 024 Pre-fail Always - 278 (Average 305) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 69 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 138 138 020 Pre-fail Offline - 31 9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 10782 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 68 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 123 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 123 194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 12/46) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 0 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 10782 - # 2 Short offline Interrupted (host reset) 90% 10776 - # 3 Short offline Interrupted (host reset) 90% 10752 - # 4 Short offline Interrupted (host reset) 90% 10728 - # 5 Short offline Completed without error 00% 10703 - # 6 Short offline Interrupted (host reset) 90% 10656 - # 7 Short offline Interrupted (host reset) 90% 10632 - # 8 Extended offline Interrupted (host reset) 90% 10628 - # 9 Short offline Interrupted (host reset) 90% 10608 - #10 Short offline Interrupted (host reset) 90% 10584 - #11 Short offline Interrupted (host reset) 90% 10560 - #12 Short offline Interrupted (host reset) 90% 10537 - #13 Short offline Interrupted (host reset) 90% 10513 - #14 Short offline Interrupted (host reset) 90% 10489 - #15 Short offline Interrupted (host reset) 90% 10465 - #16 Extended offline Interrupted (host reset) 90% 10461 - #17 Short offline Interrupted (host reset) 90% 10441 - #18 Short offline Interrupted (host reset) 90% 10417 - #19 Short offline Interrupted (host reset) 90% 10393 - #20 Short offline Completed without error 00% 10368 - #21 Short offline Completed without error 00% 10344 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. lspci | grep SATA 00:05.0 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: NVIDIA Corporation MCP55 SATA Controller (rev a3) 02:00.0 SATA controller: Marvell Technology Group Ltd. Device 9215 (rev 11) 03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) 03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) 04:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) 04:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) ======================================================================================================= sudo lshw -c storage *-usb description: Mass storage device product: AS2105 vendor: ASMedia physical id: 6 bus info: usb@1:6 version: 0.01 serial: WD-WCC4N5AHPU2D capabilities: usb-2.10 scsi configuration: driver=usb-storage speed=480Mbit/s *-ide:0 description: IDE interface product: MCP55 IDE vendor: NVIDIA Corporation physical id: 7 bus info: pci@0000:00:04.0 version: a1 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3 resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:f000(size=16) *-ide:1 description: IDE interface product: MCP55 SATA Controller vendor: NVIDIA Corporation physical id: 5 bus info: pci@0000:00:05.0 version: a3 width: 32 bits clock: 66MHz capabilities: ide pm msi ht bus_master cap_list configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3 resources: irq:21 ioport:9f0(size=8) ioport:bf0(size=4) ioport:970(size=8) ioport:b70(size=4) ioport:dc00(size=16) memory:fe02d000-fe02dfff *-ide:2 description: IDE interface product: MCP55 SATA Controller vendor: NVIDIA Corporation physical id: 5.1 bus info: pci@0000:00:05.1 version: a3 width: 32 bits clock: 66MHz capabilities: ide pm msi ht bus_master cap_list configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3 resources: irq:20 ioport:9e0(size=8) ioport:be0(size=4) ioport:960(size=8) ioport:b60(size=4) ioport:c800(size=16) memory:fe02c000-fe02cfff *-ide:3 description: IDE interface product: MCP55 SATA Controller vendor: NVIDIA Corporation physical id: 5.2 bus info: pci@0000:00:05.2 version: a3 width: 32 bits clock: 66MHz capabilities: ide pm msi ht bus_master cap_list configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3 resources: irq:23 ioport:c400(size=8) ioport:c000(size=4) ioport:bc00(size=8) ioport:b800(size=4) ioport:b400(size=16) memory:fe02b000-fe02bfff *-storage description: SATA controller product: Marvell Technology Group Ltd. vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 version: 11 width: 32 bits clock: 33MHz capabilities: storage pm msi pciexpress ahci_1.0 bus_master cap_list rom configuration: driver=ahci latency=0 resources: irq:27 ioport:9c00(size=8) ioport:9800(size=4) ioport:9400(size=8) ioport:9000(size=4) ioport:8c00(size=32) memory:fdeff000-fdeff7ff memory:fdee0000-fdeeffff *-storage description: SATA controller product: JMB363 SATA/IDE Controller vendor: JMicron Technology Corp. physical id: 0 bus info: pci@0000:03:00.0 version: 03 width: 32 bits clock: 33MHz capabilities: storage pm pciexpress ahci_1.0 bus_master cap_list rom configuration: driver=ahci latency=0 resources: irq:16 memory:fddfe000-fddfffff memory:fdde0000-fddeffff *-ide description: IDE interface product: JMB363 SATA/IDE Controller vendor: JMicron Technology Corp. physical id: 0.1 bus info: pci@0000:03:00.1 version: 03 width: 32 bits clock: 33MHz capabilities: ide pm bus_master cap_list configuration: driver=pata_jmicron latency=0 resources: irq:16 ioport:7c00(size=8) ioport:7800(size=4) ioport:7400(size=8) ioport:7000(size=4) ioport:6c00(size=16) *-storage description: SATA controller product: JMB363 SATA/IDE Controller vendor: JMicron Technology Corp. physical id: 0 bus info: pci@0000:04:00.0 version: 03 width: 32 bits clock: 33MHz capabilities: storage pm pciexpress ahci_1.0 bus_master cap_list rom configuration: driver=ahci latency=0 resources: irq:16 memory:fdcfe000-fdcfffff memory:fdce0000-fdceffff *-ide description: IDE interface product: JMB363 SATA/IDE Controller vendor: JMicron Technology Corp. physical id: 0.1 bus info: pci@0000:04:00.1 version: 03 width: 32 bits clock: 33MHz capabilities: ide pm bus_master cap_list configuration: driver=pata_jmicron latency=0 resources: irq:16 ioport:5c00(size=8) ioport:5800(size=4) ioport:5400(size=8) ioport:5000(size=4) ioport:4c00(size=16) *-scsi physical id: 1 bus info: scsi@20 logical name: scsi20 capabilities: scsi-host configuration: driver=usb-storage ======================================================================================================= /dev/sdf is connected to ata17 on the 03.00 controller has the problems /dev/sdg connected to ata18 on the same controller is fine /dev/sdf exibits a long delay when getting the report from smartctl -a and frequent interurpted smart tests i will try a new cable later and report back. thanks shadrock

1 0

[arch-general] Font packages dependencies
by Marcos Mello 13 Jan '17

13 Jan '17

Font packages are being updated removing install scripts now that fontconfig and xorg-mkfontdir have hooks to run fc-cache/mkfontscale/mkfontdir. But their dependencies are not uniform. These are already updated packages, no install scripts: adobe-source-serif-pro-fonts, cantarell-fonts, gnu-free-fonts: none ttf-croscore, noto-fonts: fontconfig ttf-droid: fontconfig, xorg-font-utils, xorg-fonts-encodings ttf-ubuntu-font-family, ttf-hanazono: fontconfig, xorg-font-utils Forum related thread: https://bbs.archlinux.org/viewtopic.php?id=221735 Should font packages depend only on fontconfig (and perhaps xorg-mkfontdir)? Or not depend on anything? Please CC me.

1 0

[arch-general] Linux 4.9 and AMDGPU for GCN 1.1
by Britt Yazel 12 Jan '17

12 Jan '17

With the upcoming Linux kernel 4.9 release in the arch repos, the flag was set to enable building AMDGPU support in Southern Islands (SI - GCN 1.0) by default. The weird thing though is that Sea Islands (CIK - GCN 1.1) support is still not enabled, even though the upstream support for CIK has existed since 4.6 and SI has only just been marked as experimental in 4.9. Why did we flip the flag for SI and still keep it disabled for CIK? Hopefully it was just an oversight, as I would love to see support for building the AMDGPU kernel module support for both of these architectures by default. It seems weird to push a kernel that has AMDGPU support for GCN 1.0 and 1.2, while leaving GCN 1.1 still in the dark. Lastly, some may argue that as long as it is still considered experimental by upstream, it makes good sense to keep from building support by default. However, since the Radeon kernel driver takes precedence over AMDGPU for both SI and CIK architectures, in order to use the AMDGPU kernel driver the user would have to explicitely blacklist the Radeon kernel module. Thus, there should not really be a scenary where a user is running an experimental driver without their informed consent. The only thing garnered by keeping the CIK module disabled at build time is that anyone with a 2012-2015 AMD graphics card needs to build their own kernel to test out the arguable "better" driver, thus gaining TONS of benefits, least of which is Vulkan support. Thanks for reading! -Britt

1 0

[arch-general] notmuch built with xapian-core from testing?
by David Runge 11 Jan '17

11 Jan '17

Hey folks, I'm getting a notmuch: error while loading shared libraries: libxapian.so.30: cannot open shared object file: No such file or directory when trying to run the current notmuch. xapian-core is currently at 1:1.2.24-1 in extra and 1:1.4.2-1 in testing. I'm a bit confused by which version should be used for notmuch to run properly or if a rebuild is needed. Cheerios, David -- https://sleepmap.de

2 1