- Arch-general - lists.archlinux.org

Recommended way to use software that depend on python2
by Sadeep Madurange 27 Apr '23

27 Apr '23

I am trying to setup ESP8266 toolchain [1] on Arch. The problem is that their SDK depends on python2. The aur package for python2 is marked as unmaintained. What is the recommended way to work with python2 on Arch? [1]: https://docs.espressif.com/projects/esp8266-rtos-sdk/en/latest/get-started/… -- Regards, Sadeep PGP: 103BF9E3E750BF7E

2 2

What can be done to prevent messages from cluttering up log files?
by Ralf Mardorf 24 Apr '23

24 Apr '23

Hi, assuming you can't get rid of the cause of messages flooding the log file, could you prevent writing with a filter? After all, only filtering when reading would not prevent the unnecessary growth of log files. I stumbled across the following which the solutions posted on the forums managed to fix. https://bbs.archlinux.org/viewtopic.php?id=275022 https://bbs.archlinux.org/viewtopic.php?id=280638 [rocketmouse@archlinux ~]$ grep threadirqs\ i /boot/grub/grub.cfg linux /boot/vmlinuz-linux root=/dev/disk/by-label/m1.archlinux ro threadirqs ibt=off ipv6.disable=1 [rocketmouse@archlinux ~]$ cat /etc/acpi/events/buttons event=button/(up|down|left|right|kpenter) action=<drop> But what could you do if there were no such workarounds? Regards, Ralf

4 4

How can I troubleshoot virtualbox issues?
by Ralf Mardorf 21 Apr '23

21 Apr '23

Hi, a self-build virtualbox 6.1.40 on old Intel Celeron hardware with a self-build 4.19-rt kernel worked even with a Windows 11 guest, while on a new Intel i3 13. gen hardware even linux 6.2.11-arch1-1 and virtualbox 7.0.8-1 from repos don't work with a Windows 10 guest. If I run "$ VirtualBox" and then try to start a Windows 10 (not 11) guest (guest additions are still 6.1.40) a small Window "Start" with a progress bar opens and nothing more happens, it stays at 20%. I need to pkill virtualbox processes to get rid of the windows, but before I can try to start it again, I need to shutdown the machine, a log out and log in doesn't work. Shutdown hangs with "A stop job is running ..." only pushing the reset button can finish shutdown, Ctrl+C or Ctrl+Alt+Del don't help. [rocketmouse@archlinux ~]$ uname -r 6.2.11-arch1-1 [rocketmouse@archlinux ~]$ pacman -Q virtualbox virtualbox-ext-oracle virtualbox-guest-iso virtualbox-host-modules-arch virtualbox 7.0.8-1 virtualbox-ext-oracle 7.0.8-1 virtualbox-guest-iso 7.0.8-1 virtualbox-host-modules-arch 7.0.8-1 [rocketmouse@archlinux ~]$ cat /mnt/winos10/winos10/Logs/VBox.log 00:00:00.520280 VirtualBox VM 7.0.8 r156879 linux.amd64 (Apr 18 2023 21:36:31) release log 00:00:00.520282 Log opened 2023-04-21T03:44:25.091405000Z 00:00:00.520282 Build Type: release 00:00:00.520283 OS Product: Linux 00:00:00.520283 OS Release: 6.2.11-arch1-1 00:00:00.520284 OS Version: #1 SMP PREEMPT_DYNAMIC Thu, 13 Apr 2023 16:59:24 +0000 00:00:00.520296 DMI Product Name: B760M DS3H DDR4 00:00:00.520300 DMI Product Version: Default string 00:00:00.520302 Firmware type: UEFI 00:00:00.520456 Secure Boot: Disabled 00:00:00.520477 Host RAM: 31875MB (31.1GB) total, 31164MB (30.4GB) available 00:00:00.520478 Executable: /usr/lib/virtualbox/VirtualBoxVM 00:00:00.520479 Process ID: 1934 00:00:00.520479 Package type: LINUX_64BITS_GENERIC (OSE) 00:00:00.523861 Installed Extension Packs: 00:00:00.523864 Oracle VM VirtualBox Extension Pack (Version: 7.0.8 r156879; VRDE Module: VBoxVRDP; Crypto Module: VBoxPuelCrypto) 00:00:00.524255 Console: Machine state changed to 'Starting' 00:00:00.524357 Qt version: 5.15.9 00:00:00.524365 X11 Window Manager code: 0 00:00:00.531648 SUP: seg #0: R 0x00000000 LB 0x00061000 00:00:00.531663 SUP: seg #1: R X 0x00061000 LB 0x001a1000 00:00:00.531665 SUP: seg #2: R 0x00202000 LB 0x0006e000 00:00:00.531666 SUP: seg #3: RW 0x00270000 LB 0x0002eae8 00:00:00.537845 GUI: UIMediumEnumerator: Medium-enumeration finished! 00:00:00.538050 X Server details: vendor: The X.Org Foundation, release: 12101008, protocol version: 11.0, display string: :0 00:00:00.538054 Using XKB for keycode to scan code conversion 00:00:00.547774 GUI: UIDesktopWidgetWatchdog::sltHandleHostScreenAvailableGeometryCalculated: Screen 0 work area is actually resized to: 0x32 x 1920x1048 Taking a look at journalctl I don't notice anything special, other than "watchdog did not stop". [rocketmouse@archlinux ~]$ journalctl -b1 | tail Apr 11 12:26:48 archlinux systemd[1]: Using hardware watchdog 'iTCO_wdt', version 0, device /dev/watchdog0 Apr 11 12:26:48 archlinux systemd[1]: Watchdog running with a timeout of 10min. Apr 11 12:26:48 archlinux kernel: watchdog: watchdog0: watchdog did not stop! Apr 11 12:26:48 archlinux systemd-shutdown[1]: Using hardware watchdog 'iTCO_wdt', version 0, device /dev/watchdog0 Apr 11 12:26:48 archlinux systemd-shutdown[1]: Watchdog running with a timeout of 10min. Apr 11 12:26:48 archlinux systemd-shutdown[1]: Syncing filesystems and block devices. Apr 11 12:26:48 archlinux systemd-shutdown[1]: Sending SIGTERM to remaining processes... Apr 11 12:26:48 archlinux systemd-journald[227]: Received SIGTERM from PID 1 (systemd-shutdow). Apr 11 12:26:48 archlinux dnsmasq[604]: exiting on receipt of SIGTERM Apr 11 12:26:48 archlinux systemd-journald[227]: Journal stopped [rocketmouse@archlinux ~]$ grep \ Driver /etc/X11/xorg.conf Driver "modesetting" [rocketmouse@archlinux ~]$ grep -e EE -e WW /var/log/Xorg.0.log [ 7.814] Current Operating System: Linux archlinux 6.2.11-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 13 Apr 2023 16:59:24 +0000 x86_64 (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7.822] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 7.822] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 8.270] (II) Initializing extension MIT-SCREEN-SAVER [rocketmouse@archlinux ~]$ hwinfo --cpu | grep Model | sort -u Model: 6.191.5 "13th Gen Intel(R) Core(TM) i3-13100" Random googling returned something that is probably not related to the issue I experience. Slow performance is still better than no performance at all: https://superuser.com/questions/1747857/does-the-hybrid-cpu-architecture-po… "Processor Cores (P-cores + E-cores) Intel® Core i3 Processors 4 (4P+0E)" - https://www.intel.com/content/www/us/en/products/docs/processors/core/13th-… Perhaps I'm missing something, but in my case https://wiki.archlinux.org/title/VirtualBox#Troubleshooting seems to be no help. Regards, Ralf

3 6

PKCS#7 signature not signed with a trusted key
by Ralf Mardorf 16 Apr '23

16 Apr '23

Hi, some kernels that do boot on my old UEFI computer with legacy boot enabled, don't boot on my new UEFI computer were the Intel processor graphics doesn't allow to enable legacy boot, but at least _secure boot_ is _disabled_. What can I do to get rid of the error? The kernel parameter "module.sig_enforce=1" is _never_ used. A kernel that fails to boot with "PKCS#7 signature not signed with a trusted key": [rocketmouse@archlinux ~]$ ls -hl /lib/modules/4.19.271-rt120-0.300-cornflower/updates/dkms/ .rw-r--r-- root root 65 KB Sun Apr 2 15:42:39 2023  r8125.ko.xz .rw-r--r-- root root 142 KB Wed Mar 1 20:17:25 2023  vboxdrv.ko.xz .rw-r--r-- root root 4.6 KB Wed Mar 1 20:17:25 2023  vboxnetadp.ko.xz .rw-r--r-- root root 14 KB Wed Mar 1 20:17:25 2023  vboxnetflt.ko.xz [rocketmouse@archlinux ~]$ grep MODULE_SIG /lib/modules/4.19.271-rt120-0.300-cornflower/build/.config CONFIG_MODULE_SIG=y # CONFIG_MODULE_SIG_FORCE is not set CONFIG_MODULE_SIG_ALL=y # CONFIG_MODULE_SIG_SHA1 is not set # CONFIG_MODULE_SIG_SHA224 is not set # CONFIG_MODULE_SIG_SHA256 is not set # CONFIG_MODULE_SIG_SHA384 is not set CONFIG_MODULE_SIG_SHA512=y CONFIG_MODULE_SIG_HASH="sha512" CONFIG_MODULE_SIG_KEY="certs/signing_key.pem" A kernel that doesn't fail: [rocketmouse@archlinux ~]$ ls -hl /lib/modules/6.2.10-arch1-1/updates/dkms/ .rw-r--r-- root root 116 KB Sun Apr 9 13:32:10 2023  r8125.ko.zst .rw-r--r-- root root 221 KB Sun Apr 9 13:31:59 2023  vboxdrv.ko.zst .rw-r--r-- root root 27 KB Sun Apr 9 13:31:59 2023  vboxnetadp.ko.zst .rw-r--r-- root root 47 KB Sun Apr 9 13:31:59 2023  vboxnetflt.ko.zst [rocketmouse@archlinux ~]$ grep MODULE_SIG /lib/modules/6.2.10-arch1-1/build/.config CONFIG_MODULE_SIG_FORMAT=y CONFIG_MODULE_SIG=y # CONFIG_MODULE_SIG_FORCE is not set CONFIG_MODULE_SIG_ALL=y # CONFIG_MODULE_SIG_SHA1 is not set # CONFIG_MODULE_SIG_SHA224 is not set # CONFIG_MODULE_SIG_SHA256 is not set # CONFIG_MODULE_SIG_SHA384 is not set CONFIG_MODULE_SIG_SHA512=y CONFIG_MODULE_SIG_HASH="sha512" CONFIG_MODULE_SIG_KEY="certs/signing_key.pem" # CONFIG_MODULE_SIG_KEY_TYPE_RSA is not set CONFIG_MODULE_SIG_KEY_TYPE_ECDSA=y Regards, Ralf

3 5

Is a tool available to check the integrity of copied files?
by Ralf Mardorf 16 Apr '23

16 Apr '23

Hi, my google search was "does linux diff compare data using a cache". I'm trying to figure out what's going on. The first diff of 10 GiB of data copied from a SATA3 SSD to an USB 2 stick connected to an USB 3 port took around a minute, right after the copy finished. A second diff needed 3 seconds. Both returned exit status 0. It's impossible to read 10 GiB of data in 3 seconds from an USB 2 stick. Does diff use cached data instead of comparing the "real" files line by line? Google returned "diff isn't doing any caching. The OS is. If you are using Linux, you can flush the disk buffers and cache". I expected that diff ensures to compare the "real" files line by line, but seemingly diff isn't aimed to check integrity of data. Does a command exist that compares "real" files, not just cached files by default? I experience weird things with Raptor Lake hardware, especially if USB is involved and I want to check the integrity of USB transferred, saved files by using a tool, without manually clearing cached data manually. Regards, Ralf

7 12

System is randomly freezing, would like troubleshooting help
by Luna Celeste 16 Apr '23

16 Apr '23

I have a System76 Thelio machine running Arch (fully up to date as of a few hours ago today). For quite a while now (at least a few months), it's been randomly hanging. I've configured the system to provide a crash dump per the Kdump wiki page, but whenever I reboot it after one of these hangs (or use the sysrq crash key), there is no /proc/vmcore file, and there's nothing in the logs. As you can understand, this makes troubleshooting difficult. In addition to this, I've not been able to identify many common factors of the hangs. The only thing that seems to be consistent is that most of the hangs occur when the system puts the display to sleep. But even this isn't consistent; today's hang occurred while the display was active (though I turned off the monitor). I've changed hardware and operating systems a few times. I originally ran PopOS on this machine, and experienced hangs there with an NVIDIA graphics card, but I moved to AMD when installing Manjaro. Again, to be clear, the machine does have a very up to date Arch install presently. The hangs occur with both X11 and Wayland. Sometimes it happens a few hours after I boot the machine, sometimes (like today's) it took a week or two. About the only unusual thing about the system is that I'm running ZFS. The root filesystem for this installation runs on ZFS, but this wasn't the case when it ran PopOS. I still had a ZFS pool on the PopOS machine. I have another ZFS pool with my home directory and my libvirt VMs on it. That said, neither of the pools have any errors, and I scrub them regularly. As I said at the start of this message, I've been struggling to figure out the problem for a few months and I'm not sure how to make progress troubleshooting it. I don't see anything in dmesg about overheating, or hardware failures, or anything like that. The machine works great... until it very suddenly doesn't. So how do I go about figuring out what's going on? I'd love to be able to -- Cheers, Luna Celeste

6 26

patches, command line long options support for arch-nspawn from devtools
by u34＠net9.ga 15 Apr '23

15 Apr '23

Hello, offload-build.in, https://gitlab.archlinux.org/archlinux/devtools/-/blob/master/src/offload-b… , has long options support for some time. Perhaps a long time. The following add long options support for arch-nspawn.in. The way long options is implemented for arch-nsapwn neccesitate changing the way it is called. There fore, archbuild.in, makechrootpkg.in and mkarchroot.in, were modfied accordingly. https://gitlab.com/ZjYwMj/devtools/-/commit/37c4602efb7642012c35a75b70a2943… (arch-nspawn.in) https://gitlab.com/ZjYwMj/devtools/-/commit/701c306d231e8faa2adc5d16b480165… (archbuild.in) https://gitlab.com/ZjYwMj/devtools/-/commit/64a434af60a1cadec37a9665318f0de… (makechrootpkg.in) https://gitlab.com/ZjYwMj/devtools/-/commit/6cc49ba9c8eed250c2cfe7bd05c6784… (mkarchroot.in) I can see the follwoing 12 scripts also call arch-nspawn: 1. /usr/bin/extra-x86_64-build 2. /usr/bin/extra-x86_64_v3-build 3. /usr/bin/gnome-unstable-x86_64-build 4. /usr/bin/kde-unstable-x86_64-build 5. /usr/bin/makerepropkg 6. /usr/bin/multilib-build 7. /usr/bin/multilib-staging-build 8. /usr/bin/multilib-testing-build 9. /usr/bin/staging-x86_64-build 10. /usr/bin/staging-x86_64_v3-build 11. /usr/bin/testing-x86_64-build 12. /usr/bin/testing-x86_64_v3-build I could not see where their source files are. In addition, manual pages, and other documentation, were not updated. Hardly tested. Please comment. -- u34

1 0

grub.cfg
by Ralf Mardorf 10 Apr '23

10 Apr '23

Hi, this is an old syslinux menu entry I try to convert to a grub.cfg menu entry. $ grep "X .Moon" /boot/syslinux/syslinux.cfg -B1 -A3 LABEL Moonstudio MENU LABEL Ubuntu X ^Moon Studio lowlatency LINUX /.boot/ubuntu_moonstudio/boot/vmlinuz-lowlatency APPEND root=LABEL=moonstudio ro INITRD /.boot/ubuntu_moonstudio/boot/initrd.img-lowlatency I don't understand a few things provided by https://wiki.archlinux.org/title/GRUB#Boot_menu_entry_examples . The syslinux bootloader, syslinux.cfg and the path /.boot/ubuntu_moonstudio/boot/ are on a MBR partition with the label "s3.archlinux", the directories of the other Linux install's root directory are on a partition with the label "moonstudio". The new grub2 and grub.cfg are on a GPT partition with the label "m1.xubu20.04", but this shouldn't matter. IIUC the grub.cfg entry should read menuentry "Ubuntu X Moon Studio lowlatency" { search --no-floppy --set=root --label s3.archlinux linux /.boot/ubuntu_moonstudio/boot/vmlinuz-lowlatency root=LABEL=moonstudio ro initrd /.boot/ubuntu_moonstudio/boot/initrd.img-lowlatency } OTOH I've got some doubts, should it be vice versa search --no-floppy --set=root --label moonstudio linux /.boot/ubuntu_moonstudio/boot/vmlinuz-lowlatency root=LABEL=s3.archlinux ro should it read root=LABEL or root=label or else? The fstab of the "Ubuntu X Moon Studio lowlatency" install contains a line to bind mount boot: /mnt/archlinux/.boot/ubuntu_moonstudio/boot /boot none bind 0 0 Regards, Ralf

1 3

X11 Input Settings Reset During Kernel Upgrade
by 2QdxY4RzWzUUiLuE＠potatochowder.com 09 Apr '23

09 Apr '23

Greetings, Call me old fashioned, but I run startx manually and I have an .xinitrc file. In that file, I run setxkbmap, xset, and xinput to set up my keyboard and my trackpad. This has been working for years, across three consecutive laptops, with minor adjustments to the parameters and input device names. A few weeks or a month ago, some system upgrades (i.e., pacman -S ...) reset those settings. The symptoms are an extremely slow trackpad and the default keyboard layout (dead keys and all). If I re-run the configuration commands from my .xinitrc file, all is well. It's hard to tell exactly which part of the process resets my settings, but I'm pretty sure it's during the post-transaction hooks, possibly around step 5/7 Updating module dependencies, or near the beginning of step 6/7 updating linux initcpios. It only happens when pacman rebuilds my kernel; at first, I thought it was tied to systemd upgrades, but it happened this morning, and there is no systemd upgrade. I run a stock kernel with liitle no customization. So far, none of the upgrades have failed, and I've not had problems rebooting with the new kernels. I do see entries in Xorg.0.log related to input devices from around that time, but I can't correlate those entries with the output from pacman. I hope the relevant section is below. Any thoughts? What other information can I provide? What experiments can I run? Thank you, Dan [759472.487] (II) config/udev: Adding input device PC Speaker (/dev/input/event8) [759472.487] (II) No input driver specified, ignoring this device. [759472.487] (II) This device may have been added with another device file. [759472.487] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17) [759472.487] (II) No input driver specified, ignoring this device. [759472.487] (II) This device may have been added with another device file. [759472.488] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event20) [759472.488] (II) No input driver specified, ignoring this device. [759472.488] (II) This device may have been added with another device file. [759472.488] (II) config/udev: removing device ELAN0412:01 04F3:316F Touchpad [759472.488] (**) Option "fd" "88" [759472.488] (II) event15 - ELAN0412:01 04F3:316F Touchpad: device removed [759472.488] (II) UnloadModule: "libinput" [759472.488] (II) systemd-logind: releasing fd for 13:79 [759472.530] (II) config/udev: Adding input device ELAN0412:01 04F3:316F Touchpad (/dev/input/event15) [759472.530] (**) ELAN0412:01 04F3:316F Touchpad: Applying InputClass "libinput touchpad catchall" [759472.530] (II) Using input driver 'libinput' for 'ELAN0412:01 04F3:316F Touchpad' [759472.531] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 86 paused 0 [759472.531] (**) ELAN0412:01 04F3:316F Touchpad: always reports core events [759472.531] (**) Option "Device" "/dev/input/event15" [759472.532] (II) event15 - ELAN0412:01 04F3:316F Touchpad: is tagged by udev as: Touchpad [759472.532] (II) event15 - ELAN0412:01 04F3:316F Touchpad: device is a touchpad [759472.532] (II) event15 - ELAN0412:01 04F3:316F Touchpad: device removed [759472.533] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-15/i2c-ELAN0412:01/0018:04F3:316F.0001/input/input21/event15" [759472.533] (II) XINPUT: Adding extended input device "ELAN0412:01 04F3:316F Touchpad" (type: TOUCHPAD, id 13) [759472.533] (**) Option "AccelerationScheme" "none" [759472.533] (**) ELAN0412:01 04F3:316F Touchpad: (accel) selected scheme none/0 [759472.533] (**) ELAN0412:01 04F3:316F Touchpad: (accel) acceleration factor: 2.000 [759472.533] (**) ELAN0412:01 04F3:316F Touchpad: (accel) acceleration threshold: 4 [759472.534] (II) event15 - ELAN0412:01 04F3:316F Touchpad: is tagged by udev as: Touchpad [759472.535] (II) event15 - ELAN0412:01 04F3:316F Touchpad: device is a touchpad [759472.535] (II) config/udev: removing device ETPS/2 Elantech Touchpad [759472.535] (**) Option "fd" "75" [759472.535] (II) event22 - ETPS/2 Elantech Touchpad: device removed [759472.535] (II) UnloadModule: "libinput" [759472.535] (II) systemd-logind: releasing fd for 13:86 [759472.580] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event22) [759472.580] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall" [759472.580] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad' [759472.581] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 75 paused 0 [759472.581] (**) ETPS/2 Elantech Touchpad: always reports core events [759472.581] (**) Option "Device" "/dev/input/event22" [759472.581] (II) event22 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad [759472.582] (II) event22 - ETPS/2 Elantech Touchpad: device is a touchpad [759472.582] (II) event22 - ETPS/2 Elantech Touchpad: device removed [759472.582] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event22" [759472.582] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 16) [759472.583] (**) Option "AccelerationScheme" "none" [759472.583] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0 [759472.583] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 [759472.583] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 [759472.583] (II) event22 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad [759472.584] (II) event22 - ETPS/2 Elantech Touchpad: device is a touchpad [759472.584] (EE) event15 - ELAN0412:01 04F3:316F Touchpad: client bug: event processing lagging behind by 46ms, your system is too slow [759472.585] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event21) [759472.585] (II) No input driver specified, ignoring this device. [759472.585] (II) This device may have been added with another device file. [759472.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10) [759472.585] (II) No input driver specified, ignoring this device. [759472.585] (II) This device may have been added with another device file. [759472.585] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event16) [759472.585] (II) No input driver specified, ignoring this device. [759472.585] (II) This device may have been added with another device file. [759472.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13) [759472.585] (II) No input driver specified, ignoring this device. [759472.585] (II) This device may have been added with another device file. -- I can eat glass, it does not hurt me. Dan Sommers, http://www.tombstonezero.net/dan

2 2

firefox no longer starts - could it be wayland package?
by Genes Lists 07 Apr '23

07 Apr '23

Running on gnome This may have to do with updated updated wayland package (1.22.0-1) - didn't see much else that may be related. I tried rolling back firefox and makes no difference - I also tried with and without MOZ_ENABLE_WAYLAND - always get instant crash with: ExceptionHandler::GenerateDump cloned child 5628 ExceptionHandler::SendContinueSignalToChild sent continue signal to child ExceptionHandler::WaitForContinueSignal waiting for continue signal... Anyone else seeing similar and any suggestions for fix? thanks gene

6 11