- Arch-general - lists.archlinux.org

Re: [arch-general] [signoff] lilo 23.1-2
by Allan McRae 04 Jan '11

04 Jan '11

On 04/01/11 21:40, Andrea Scarpino wrote: > On Wednesday 01 December 2010 04:57:58 Adrian C. wrote: >> Signoff i686. > Do we need a signoff from x86_64 or can I move this? > It has been over a month so just move it. Signoff x86_64 if it makes you feel better :P Allan

1 0

[arch-general] [signoff] lilo 23.1-2
by Andrea Scarpino 04 Jan '11

04 Jan '11

from lilo 23.1-1 - upstream release - new url - updated source - use package() function - updated make options - rebuilt to switch to tar.xz lilo 23.1-2 - fixed source - added sharutils as new makedependence - added perl as optdependence to run keytab-lilo lilo 23.1-1 was without signoff, please signoff lilo 23.1-2 for both arches -- Andrea Scarpino Arch Linux Developer

2 2

[arch-general] kdebase-keditbookmarks is optional dep for...
by Joker-jar 04 Jan '11

04 Jan '11

1. Krusader Optional Deps : kdebase-konqueror: to edit bookmarks edit to: Optional Deps : kdebase-keditbookmarks: to edit bookmarks 2. kdenetwork-krdc add: Optional Deps : kdebase-keditbookmarks: to edit bookmarks Who know anything else?

2 1

[arch-general] (rt61pci/hostapd) no packet activity when encryption is enabled and interface is bridged
by C Anthony Risinger 04 Jan '11

04 Jan '11

hello, slightly out of scope for tis list... but i've been trying to solve this for a few days, so after much googling, i've given in and am looking here for assistance. i've also sent this message to linux-wireless. problem summary: an rt61pci driven card does not seem to allow any packets to enter/exit it's bridge ONLY WHEN ENCRYPTION is enabled; without it, everything works perfectly. i recently bought an older wireless G card for use as an access point to replace my ageing wrt54g. my physical server runs libvirt/kvm and [next to] nothing else. hostapd runs on the host. when hostapd starts up, the card's interface (wlan0) is added to an existing bridge (green0) via hostapd's config option. a small VM is also linked to this bridge; this "router/gateway" VM provides all local networking services (NAT/DHCP/DNS forward/etc.), and manages the untrusted, outside connection (red0)... also a bridge. interface summary: --------------------------------------------------------------- red0 bridge. untrusted; direct attached to internet green0 bridge. trusted; [W]LAN and VM clients wlan0 wireless interface (rt61pci) vnet0-0 host facing interface of the router VM (WAN [red0]) vnet0-1 VM facing interface of the router VM (WAN [red0]) vnet1-0 host facing interface of the router VM (LAN [green0]) vnet1-1 VM facing interface of the router VM (LAN [green0]) eth0 untrusted physical link to internet --------------------------------------------------------------- visual-ish summary: --------------------------------------------------------------- [ green0 ]( wlan0, vnet1-0 ) | | [ vnet1-1 ] : : (firewall rules, policies, etc.) : [ vnet0-1 ] | | [ red0 ]( eth0, vnet0-0 ) --------------------------------------------------------------- now, everything works perfectly... right up until i enable WPA in hostapd. after that, my clients can associate just fine (in fact, -dd shows no sign of any problems whatsoever, see below) but they cannot receive an IP via DHCP... no packets seem to pass through at all (ifconfig?). i have read elsewhere about problems with bridging, so i'm about to test right now by running a DHCP daemon directly on wlan0... but i can't do anything useful/simply without bridge support. does anyone know what's going on here, or any tips on how to confirm/test/debug? i have tried from 4 clients with the same results: ) google nexus s mobile ) samsung vibrant mobile ) thinkpad t43 ) eee s101 so i'm fairly confident it's the AP. also, when i do this (on host) while hostapd is running: ip link set wlan0 down && ip link set wlan0 up; it strangely starts working (clients get IP, and can use the connection for awhile), but not consistently; the nexus reconnects every 5-10 seconds, and though the t43 remains connected... the AP will shortly stop allowing traffic, and back to square one. ideas? following is every piece of info i thought might be useful :-) let me know if i missed anything. all commands (except last) ran from host while hostapd runs in background. thanks, C Anthony --------------------------------------------------------------- # lspci -s 04:06.0 -vv 04:06.0 Network controller: RaLink RT2561/RT61 802.11g PCI Subsystem: ASUSTeK Computer Inc. Device 837e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at febf8000 (32-bit, non-prefetchable) [size=32K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: rt61pci Kernel modules: rt61pci --------------------------------------------------------------- (kernel 2.6.36.2) # uname -a Linux extofme-p01 2.6.36-ARCH #1 SMP PREEMPT Fri Dec 10 20:32:37 CET 2010 x86_64 AMD Phenom(tm) 9950 Quad-Core Processor AuthenticAMD GNU/Linux --------------------------------------------------------------- # modinfo rt61pci filename: /lib/modules/2.6.36-ARCH/kernel/drivers/net/wireless/rt2x00/rt61pci.ko license: GPL firmware: rt2661.bin firmware: rt2561s.bin firmware: rt2561.bin description: Ralink RT61 PCI & PCMCIA Wireless LAN driver. version: 2.3.0 author: http://rt2x00.serialmonkey.com srcversion: F1774A00C329E6A439932A5 alias: pci:v00001814d00000401sv*sd*bc*sc*i* alias: pci:v00001814d00000302sv*sd*bc*sc*i* alias: pci:v00001814d00000301sv*sd*bc*sc*i* depends: rt2x00lib,rt2x00pci,eeprom_93cx6,crc-itu-t vermagic: 2.6.36-ARCH SMP preempt mod_unload parm: nohwcrypt:Disable hardware encryption. (bool) --------------------------------------------------------------- # ip link && ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:23:54:16:74:82 brd ff:ff:ff:ff:ff:ff 4: red0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:23:54:16:74:82 brd ff:ff:ff:ff:ff:ff 5: green0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 48:5b:39:bd:fe:a2 brd ff:ff:ff:ff:ff:ff 7: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether fe:54:00:75:c8:9d brd ff:ff:ff:ff:ff:ff 8: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether fe:54:00:07:60:02 brd ff:ff:ff:ff:ff:ff 26: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 1000 link/ether 48:5b:39:bd:fe:a2 brd ff:ff:ff:ff:ff:ff 27: mon.wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 1000 link/ieee802.11/radiotap 48:5b:39:bd:fe:a2 brd ff:ff:ff:ff:ff:ff 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:23:54:16:74:82 brd ff:ff:ff:ff:ff:ff inet6 fe80::223:54ff:fe16:7482/64 scope link valid_lft forever preferred_lft forever 4: red0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:23:54:16:74:82 brd ff:ff:ff:ff:ff:ff inet 192.168.1.150/24 brd 192.168.1.255 scope global red0 inet6 fe80::223:54ff:fe16:7482/64 scope link valid_lft forever preferred_lft forever 5: green0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 48:5b:39:bd:fe:a2 brd ff:ff:ff:ff:ff:ff inet 10.10.10.102/24 brd 10.10.10.255 scope global green0 inet6 fe80::4a5b:39ff:febd:fea2/64 scope link valid_lft forever preferred_lft forever 7: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether fe:54:00:75:c8:9d brd ff:ff:ff:ff:ff:ff inet6 fe80::fc54:ff:fe75:c89d/64 scope link valid_lft forever preferred_lft forever 8: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether fe:54:00:07:60:02 brd ff:ff:ff:ff:ff:ff inet6 fe80::fc54:ff:fe07:6002/64 scope link valid_lft forever preferred_lft forever 26: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 1000 link/ether 48:5b:39:bd:fe:a2 brd ff:ff:ff:ff:ff:ff inet6 fe80::4a5b:39ff:febd:fea2/64 scope link valid_lft forever preferred_lft forever 27: mon.wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN qlen 1000 link/ieee802.11/radiotap 48:5b:39:bd:fe:a2 brd ff:ff:ff:ff:ff:ff --------------------------------------------------------------- (slightly edited for email) # brctl show bridge name bridge id STP enabled interfaces green0 8000.485b39bdfea2 no vnet1, wlan0 red0 8000.002354167482 no eth0, vnet0 --------------------------------------------------------------- (minimal version... the one i tweaked based on defaults had same results) # cat /etc/hostapd/hostapd.conf interface=wlan0 bridge=green0 logger_stdout=-1 logger_stdout_level=0 ssid=MySSID hw_mode=g channel=8 wpa=2 wpa_passphrase=wifipass wpa_key_mgmt=WPA-PSK rsn_pairwise=CCMP --------------------------------------------------------------- # hostapd -dd /etc/hostapd/hostapd.conf Configuration file: /etc/hostapd/hostapd.conf nl80211: Add own interface ifindex 5 nl80211: Add own interface ifindex 18 nl80211: New interface mon.wlan0 created: ifindex=24 nl80211: Add own interface ifindex 24 nl80211: Adding interface wlan0 into bridge green0 BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=19 dBm Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=19 dBm Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=19 dBm Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=19 dBm Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=19 dBm Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=17 dBm Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=17 dBm Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=17 dBm Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=17 dBm Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=17 dBm Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=15 dBm Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=19 dBm Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=19 dBm Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=19 dBm Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=19 dBm Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=19 dBm Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=17 dBm Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=17 dBm Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=17 dBm Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=17 dBm Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=17 dBm Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=15 dBm RATE[0] rate=10 flags=0x1 RATE[1] rate=20 flags=0x1 RATE[2] rate=55 flags=0x1 RATE[3] rate=110 flags=0x1 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Completing interface initialization Mode: IEEE 802.11g Channel: 8 Frequency: 2447 MHz Flushing old station entries Deauthenticate all stations wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=(nil) key_idx=0 set_tx=1 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 Using interface wlan0 with hwaddr 48:5b:39:bd:fe:a2 and ssid 'MySSID' Deriving WPA PSK based on passphrase SSID - hexdump_ascii(len=6): 4d 79 53 53 49 44 MySSID PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED] PSK (from passphrase) - hexdump(len=32): [REMOVED] WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=16): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) wpa_driver_nl80211_set_key: ifindex=18 alg=3 addr=(nil) key_idx=1 set_tx=1 seq_len=0 key_len=16 nl80211: Set beacon (beacon_set=0) wlan0: Setup of interface done. RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () RTM_NEWLINK, IFLA_IFNAME: Interface 'mon.wlan0' added Unknown event 5 RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'mon.wlan0' added Unknown event 5 RTM_NEWLINK: operstate=0 ifi_flags=0x1102 () RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 nl80211: Add ifindex 5 for bridge green0 nl80211: Add own interface ifindex 5 RTM_NEWLINK: operstate=0 ifi_flags=0x11143 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 RTM_NEWLINK: operstate=0 ifi_flags=0x11143 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Unknown event 5 nl80211: Add ifindex 5 for bridge green0 nl80211: Add own interface ifindex 5 unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for our SSID mgmt::proberesp cb mgmt::auth authentication: STA=b4:07:f9:e3:1d:5c auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: authentication OK (open system) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-AUTHENTICATE.indication(b4:07:f9:e3:1d:5c, OPEN_SYSTEM) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DELETEKEYS.request(b4:07:f9:e3:1d:5c) authentication reply: STA=b4:07:f9:e3:1d:5c auth_alg=0 auth_transaction=2 resp=0 (IE len=0) mgmt::assoc_req association request: STA=b4:07:f9:e3:1d:5c capab_info=0x431 listen_interval=10 unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) new AID 1 wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: association OK (aid 1) mgmt::auth cb wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: authenticated mgmt::assoc_resp cb wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: associated (aid 1) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-ASSOCIATE.indication(b4:07:f9:e3:1d:5c) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DELETEKEYS.request(b4:07:f9:e3:1d:5c) wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c WPA: event 1 notification wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c WPA: start authentication WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state INITIALIZE wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.1X: unauthorizing port WPA: b4:07:f9:e3:1d:5c WPA_PTK_GROUP entering state IDLE WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state AUTHENTICATION WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state AUTHENTICATION2 WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state INITPSK WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state PTKSTART wlan0: STA b4:07:f9:e3:1d:5c WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) nl80211: Event message available nl80211: Ignored unknown event (cmd=19) IEEE 802.1X: b4:07:f9:e3:1d:5c TX status - version=2 type=3 length=95 - ack=1 IEEE 802.1X: 121 bytes from b4:07:f9:e3:1d:5c IEEE 802.1X: version=1 type=3 length=117 wlan0: STA b4:07:f9:e3:1d:5c WPA: received EAPOL-Key frame (2/4 Pairwise) WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state PTKCALCNEGOTIATING WPA: PTK derivation - A1=48:5b:39:bd:fe:a2 A2=b4:07:f9:e3:1d:5c WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=48): [REMOVED] WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state PTKCALCNEGOTIATING2 WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state PTKINITNEGOTIATING wlan0: STA b4:07:f9:e3:1d:5c WPA: sending 3/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=1 mic=1 ack=1 install=1 pairwise=8 kde_len=46 keyidx=1 encr=1) Plaintext EAPOL-Key Key Data - hexdump(len=56): [REMOVED] IEEE 802.1X: b4:07:f9:e3:1d:5c TX status - version=2 type=3 length=151 - ack=1 IEEE 802.1X: 99 bytes from b4:07:f9:e3:1d:5c IEEE 802.1X: version=1 type=3 length=95 wlan0: STA b4:07:f9:e3:1d:5c WPA: received EAPOL-Key frame (4/4 Pairwise) WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state PTKINITDONE wpa_driver_nl80211_set_key: ifindex=18 alg=3 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=16 addr=b4:07:f9:e3:1d:5c AP-STA-CONNECTED b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.1X: authorizing port wlan0: STA b4:07:f9:e3:1d:5c RADIUS: starting accounting session 4D229FBB-00000000 wlan0: STA b4:07:f9:e3:1d:5c WPA: pairwise key handshake completed (RSN) unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb STA 00:23:15:1a:ea:dc sent probe request for broadcast SSID mgmt::proberesp cb STA 00:23:15:1a:ea:dc sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb STA 00:13:ce:77:8a:eb sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb STA 00:13:ce:77:8a:eb sent probe request for broadcast SSID mgmt::proberesp cb STA 00:13:ce:77:8a:eb sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb mgmt::disassoc disassocation: STA=b4:07:f9:e3:1d:5c reason_code=8 AP-STA-DISCONNECTED b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c WPA: event 2 notification wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state DISCONNECTED WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state INITIALIZE wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.1X: unauthorizing port wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: disassociated wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DISASSOCIATE.indication(b4:07:f9:e3:1d:5c, 8) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DELETEKEYS.request(b4:07:f9:e3:1d:5c) wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c Sending deauthentication info to STA b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: deauthenticated due to inactivity wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DEAUTHENTICATE.indication(b4:07:f9:e3:1d:5c, 2) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DELETEKEYS.request(b4:07:f9:e3:1d:5c) wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for broadcast SSID mgmt::proberesp cb unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) STA b4:07:f9:e3:1d:5c sent probe request for our SSID mgmt::proberesp cb mgmt::auth authentication: STA=b4:07:f9:e3:1d:5c auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: authentication OK (open system) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-AUTHENTICATE.indication(b4:07:f9:e3:1d:5c, OPEN_SYSTEM) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DELETEKEYS.request(b4:07:f9:e3:1d:5c) authentication reply: STA=b4:07:f9:e3:1d:5c auth_alg=0 auth_transaction=2 resp=0 (IE len=0) mgmt::auth cb wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: authenticated mgmt::assoc_req association request: STA=b4:07:f9:e3:1d:5c capab_info=0x431 listen_interval=10 unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9) new AID 1 wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: association OK (aid 1) mgmt::assoc_resp cb wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: associated (aid 1) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-ASSOCIATE.indication(b4:07:f9:e3:1d:5c) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DELETEKEYS.request(b4:07:f9:e3:1d:5c) wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c WPA: event 1 notification wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c WPA: start authentication WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state INITIALIZE wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.1X: unauthorizing port WPA: b4:07:f9:e3:1d:5c WPA_PTK_GROUP entering state IDLE WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state AUTHENTICATION WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state AUTHENTICATION2 WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state INITPSK WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state PTKSTART wlan0: STA b4:07:f9:e3:1d:5c WPA: sending 1/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0) nl80211: Event message available nl80211: Ignored unknown event (cmd=19) IEEE 802.1X: b4:07:f9:e3:1d:5c TX status - version=2 type=3 length=95 - ack=1 IEEE 802.1X: 121 bytes from b4:07:f9:e3:1d:5c IEEE 802.1X: version=1 type=3 length=117 wlan0: STA b4:07:f9:e3:1d:5c WPA: received EAPOL-Key frame (2/4 Pairwise) WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state PTKCALCNEGOTIATING WPA: PTK derivation - A1=48:5b:39:bd:fe:a2 A2=b4:07:f9:e3:1d:5c WPA: PMK - hexdump(len=32): [REMOVED] WPA: PTK - hexdump(len=48): [REMOVED] WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state PTKCALCNEGOTIATING2 WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state PTKINITNEGOTIATING wlan0: STA b4:07:f9:e3:1d:5c WPA: sending 3/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=1 mic=1 ack=1 install=1 pairwise=8 kde_len=46 keyidx=1 encr=1) Plaintext EAPOL-Key Key Data - hexdump(len=56): [REMOVED] IEEE 802.1X: b4:07:f9:e3:1d:5c TX status - version=2 type=3 length=151 - ack=1 IEEE 802.1X: 99 bytes from b4:07:f9:e3:1d:5c IEEE 802.1X: version=1 type=3 length=95 wlan0: STA b4:07:f9:e3:1d:5c WPA: received EAPOL-Key frame (4/4 Pairwise) WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state PTKINITDONE wpa_driver_nl80211_set_key: ifindex=18 alg=3 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=16 addr=b4:07:f9:e3:1d:5c AP-STA-CONNECTED b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.1X: authorizing port wlan0: STA b4:07:f9:e3:1d:5c RADIUS: starting accounting session 4D229FBB-00000001 wlan0: STA b4:07:f9:e3:1d:5c WPA: pairwise key handshake completed (RSN) ... ... (the STA will then disco in a couple seconds like above ...) ... ... mgmt::disassoc disassocation: STA=b4:07:f9:e3:1d:5c reason_code=8 AP-STA-DISCONNECTED b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c WPA: event 2 notification wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state DISCONNECTED WPA: b4:07:f9:e3:1d:5c WPA_PTK entering state INITIALIZE wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.1X: unauthorizing port wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: disassociated wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DISASSOCIATE.indication(b4:07:f9:e3:1d:5c, 8) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DELETEKEYS.request(b4:07:f9:e3:1d:5c) wpa_driver_nl80211_set_key: ifindex=18 alg=0 addr=0x2051090 key_idx=0 set_tx=1 seq_len=0 key_len=0 addr=b4:07:f9:e3:1d:5c Sending deauthentication info to STA b4:07:f9:e3:1d:5c wlan0: STA b4:07:f9:e3:1d:5c IEEE 802.11: deauthenticated due to inactivity wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DEAUTHENTICATE.indication(b4:07:f9:e3:1d:5c, 2) wlan0: STA b4:07:f9:e3:1d:5c MLME: MLME-DELETEKEYS.request(b4:07:f9:e3:1d:5c) ... ... (... and the whole thing repeats over and over because the STA never receives a DHCP response, and the DHCP server never gets the request... wtf yo?) ... ...

1 0

[arch-general] Updated /var/cache/pacman/pkg old package version removal scripts
by David C. Rankin 04 Jan '11

04 Jan '11

Guys, I have updated the script that I use to scan /var/cache/pacman/pkg and move old package versions to /home/backup/pkg-1 (next older version in: pkg-2, then pkg-3 and finally pkg-del). Additions to the script include directory md5sum checks for new packages (the script skips parsing any directory if there are no changes) and a disk usage summary at the end showing the size of each directory. As in the past, there are 2 scripts involved. The script you execute is 'fduparch.sh' which calls fduppkg for each directory. Currently, the only packages that the script misses are those with number as part of the name like "mplayer-32663-1". It handles virtually all others without issue. Grab the scripts here: http://www.3111skyline.com/dl/Archlinux/scripts/fduparch.sh http://www.3111skyline.com/dl/Archlinux/scripts/fduppkg To use the scripts, just download the scripts, make sure they are executable, and then create soft links to them in /usr/local/bin. I have the links setup as follows: fduparch -> /home/david/scr/arch/fduparch.sh fduppkg -> /home/david/scr/arch/fduppkg Then just call fduparch to remove duplicates from /var/cache/pacman/pkg and create the directories under /home/backup. I have it configured to save the last 3 versions of each package in /home/backup/{pkg-1,pkg-2,pkg-3} with any remaining duplicates dumped in /home/backup/pkg-del to be deleted - manually. Run fduparch [-h | --help] for a usage summary for both scripts. I have changed the backup package dir names from pkg-old, pkg-older to just pkg-1, pkg-2... pkg-del. The script has checks for the pkg-old, pkg-older names and moves the directories to the new names if you have used a prior version of the script. To change the location or number of backup directories, just edit the following line in fduparch.sh and remove or rename the locations: DIRLIST=( /var/cache/pacman/pkg /home/backup/pkg-1 /home/backup/pkg-2 /home/backup/pkg-3 /home/backup/pkg-del ) For example to just save just one prior version of your packages and move everything else to pkg-del, then just do: DIRLIST=( /var/cache/pacman/pkg /home/backup/pkg-1 /home/backup/pkg-del ) ** you need at least 1 directory in addition to /var/cache/pacman/pkg for the array logic ${#DIRLIST[@]}-1 to work. But beyond that, you can simply change the name and location of the backup package directories to whatever you want. The script creates 2 other files. /home/backup/.data/pkgdir-md5.txt to hold the md5sums for the directories and /home/backup/log/pkgdups.log.bz2 which is simply a log file of what was moved where. You can change any of this to suit your taste by editing the variables in the script. Also, to run the script as your user with sudo, just edit the line: if [[ $USER == david ]]; then and change david to your username. Otherwise you will need to run the script as root for permissions to move packages from /var/cache/pacman/pkg and to create the /home/backup directory. The script output (default) shows a brief heading for each directory it operates on and then provides a disk usage summary at the end: 09:58 archangel:~/arch/pkg> fduparch calling: 'fduppkg /var/cache/pacman/pkg -d /home/backup/pkg-1 -l pkgdups.log' Total packages to screen: 1989 Removing duplicates from: /var/cache/pacman/pkg Duplicates directory: /home/backup/pkg-1 Log file location: pkgdups.log Verbose mode set: [use -q to stop pkg output | -s to stop all output] pkg [ 70] binutils dup => binutils-2.20.1-4-x86_64.pkg.tar.xz pkg [ 308] f-spot dup => f-spot-0.6.2-1-x86_64.pkg.tar.xz <snip> 11 duplicates moved to /home/backup/pkg-1 <snip operations on other directories> Duplicate Removal Summary 3.2G /var/cache/pacman/pkg 2.4G /home/backup/pkg-1 2.8G /home/backup/pkg-2 2.4G /home/backup/pkg-3 103M /home/backup/pkg-del If there are no changes to the files in the directories, then they are skipped and you are just presented with a summary at the end. For anyone interested in learning a bit about bash scripting, the scripts are reasonably commented and cover a broad spectrum of what bash can do. Enjoy. -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com

1 1

[arch-general] [signoff] usbutils-001-1
by Tobias Powalowski 03 Jan '11

03 Jan '11

usbutils 001 ============ Greg Kroah-Hartman (2): usb.ids update from linux-usb.org updated usbhid-dump subproject Laurent Pinchart (2): usbutils: Support UVC frame-based descriptors usbutils: Support UVC MPEG2-TS format descriptor Luben Tuikov (3): lsusb: Fix getting BOS and DEVQUAL descriptors lsusb: Dump the Pipe Usage desciptor lsusb: Fix bMaxBurst reporting Mike Frysinger (5): lsusb: install into /usr/bin usbmisc: pull in unistd.h for readlink() lsusb: pull in stdlib.h for exit() lsusb: constify! usbutils: convert to libusb-1.0 Nikolai Kondrashov (1): Update usbhid-dump to release 1.2 Sarah Sharp (2): usbutils: Fix compile error on Ubuntu 9.04. usbutils: Make lsusb -t show USB 3.0 devices. Upstream release Version numbering changed a options=('force') is needed for this upgrade. please signoff both arches, greetings tpowa -- Tobias Powalowski Archlinux Developer & Package Maintainer (tpowa) http://www.archlinux.org tpowa(a)archlinux.org

1 0

[arch-general] [signoff] pam 1.1.3-1
by Tobias Powalowski 03 Jan '11

03 Jan '11

Release 1.1.3 * pam_namespace: Clean environment for childs (CVE-2010-3853) * libpam: New interface to drop/regain privilegs * Drop root privilegs in pam_env, pam_mail and pam_xauth before accessing user files (CVE-2010-3430, CVE-2010-3431) * pam_unix: Add minlen option, change default from 6 to 0 * Documentation improvements * Lot of small bug fixes Release 1.1.2 * pam_unix: Add minlen= option * pam_group: Add support for UNIX groups beside netgroups * pam_tally: Document that it is deprecated * pam_rootok: Add support for chauthtok and acct_mgmt * Update translations upstream release and fixed docs #19751 please signoff both arches, greetings tpowa -- Tobias Powalowski Archlinux Developer & Package Maintainer (tpowa) http://www.archlinux.org tpowa(a)archlinux.org

1 0

[arch-general] [signoff] groff 1.21-1
by Tobias Powalowski 03 Jan '11

03 Jan '11

VERSION 1.21 ============ Troff ----- o The new `lsm' request specifies a macro to be invoked when leading spaces in an input line are encountered (which are removed then). Number registers `lsn' and `lss' hold the number of removed leading spaces and the corresponding horizontal space, respectively. o There is a new warning category `file', enabled by default. The `mso' request emits warnings in this category when the requested macro file does not exist. o The new `class' request assigns a short name to a set of characters which can be referred to in the `cflags' request. This is especially useful to control line-breaking and hyphenation rules in CJK languages. o Three new values for the `cflags' request have been added, which are needed for proper CJK support. 128 prohibit before but allow break after character 256 prohibit after but allow break before character 512 allow break before and after character Tbl --- o A new global option `nowarn' suppresses warnings if tables are longer than the current line width. Afmtodit -------- o New option `-o' to specify the name of the output file. Macro Packages -------------- o A new macro `%U' has been added to the mdoc package to indicate a URL reference within an .Rs/.Re environment. o Rudimentary support for the Japanese script has been added, most suitable for man page handling as output by grotty. The file `ja.tmac' contains the necessary setup to allow line breaks before and after CJK characters (with proper exceptions). Note, however, that no inter-character spacing is implemented yet -- this usually causes many warnings about bad line breaks. a Fixed groffer #21245 Please signoff both arches, greetings tpowa -- Tobias Powalowski Archlinux Developer & Package Maintainer (tpowa) http://www.archlinux.org tpowa(a)archlinux.org

1 0

[arch-general] [signoff] udev-165-1
by Tobias Powalowski 03 Jan '11

03 Jan '11

Hi guys. upstream release: udev 165 ======== Bugfixes. The udev database has changed, After installation of a new udev version, 'udevadm info --convert-db' should be called, to let the new udev/libudev version read the already stored data. udevadm now supports quoting of property values, and prefixing of key names: $ udevadm info --export --export-prefix=MY_ --query=property -n sda MY_MAJOR='259' MY_MINOR='0' MY_DEVNAME='/dev/sda' MY_DEVTYPE='disk' ... libudev now supports: udev_device_get_is_initialized() udev_enumerate_add_match_is_initialized() to be able to skip devices the kernel has created , but udev has not already handled. libudev now supports: udev_device_get_usec_since_initialized() to retrieve the "age" of a udev device record. GUdev supports a more generic GUdevEnumerator class, udev TAG handling, device initialization and timestamp now. The counterpart of /sys/dev/{char,block}/$major:$minor, /dev/{char,block}/$major:$minor symlinks are now unconditionally created, even when no rule files exist. please signoff both arches, greetings tpowa -- Tobias Powalowski Archlinux Developer & Package Maintainer (tpowa) http://www.archlinux.org tpowa(a)archlinux.org

1 0

[arch-general] Linux / mkinitcpio / vbox bug: bad swap file entry
by Dieter Plaetinck 03 Jan '11

03 Jan '11

while testing new images, I get this: http://users.edpnet.be/dieter/vbox-or-kernel-or-mkinitcpio-bug.png the error messages show up in google results and seem to be bugs in the Linux swap code and/or drivers. interestingly, at first aif/dialog/mkinitcpio/find just keep running, but after a while the processes just vanish. dmesg doesn't say anything about OOM killer, but i get login prompts where i used to have a terminal with aif/initcpio running. dmesg here: http://sprunge.us/YWQS any advice? i can probably workaround it by using more ram, but still... Dieter

2 2