- Aur-general - lists.archlinux.org

[aur-general] My AUR4 migration workflow
by Florian Bruhin 10 Jun '15

10 Jun '15

Hi, I just migrated my packages to AUR4 and thought I'd share some notes I did during the process. After a quick try I didn't use any script as I wanted to see what's going on and do some manual corrections. This is too terse for the wiki I think, but maybe it helps someone. The starting point was one repo with subfolders for the packages. Contrary to some scripts, I actually split the repo into different *repos* before uploading, so I could rebase and correct issues. Get the old repo: $ cd ~/aur4 $ git clone ... old-repo $ cd old-repo Get a list of packages (which can be edited by hand if there are non-package folders): $ for pkg in */; do p=${pkg%/}; echo "$p"; done > ../pkgs Split out packages to an aur4/pkgname ref: $ while read p; do git subtree split --prefix="$p" -b "aur4/$p"; done < ../pkgs Clone each package into a new repo: $ cd ~/aur4 $ mkdir new-repos $ cd new-repos $ while read p; do git clone --branch="aur4/$p" ../old-repo "$p"; done < ../pkgs Set the master branch correctly and clean up leftovers: $ while read p; do (cd "$p"; git checkout master; git reset --hard "aur4/$p"; git branch -D "aur4/$p"; git remote rm origin; git gc --prune=0); done < ../pkgs Generate .SRCINFO for all packages: $ while read p; do git -C "$p" filter-branch -f --tree-filter "test -f .SRCINFO || mksrcinfo"; done < ../pkgs Setup all repos: $ while read p; do ssh aur(a)aur4.archlinux.org setup-repo "$p"; done < ../pkgs Add the origin remote and set upstream branch: $ while read p; do git -C "$p" remote add origin "ssh+git://aur@aur4.archlinux.org/$p.git"; git -C "$p" branch --set-upstream origin; done < ../pkgs After that, I changed into each repo, reviewed the history, did git rebase -i --root as necessary and pushed via git push. Florian -- http://www.the-compiler.org | me(a)the-compiler.org (Mail/XMPP) GPG: 916E B0C8 FD55 A072 | http://the-compiler.org/pubkey.asc I love long mails! | http://email.is-not-s.ms/

1 0

[aur-general] Can't clone my aur4 git repo: git-upload-pack: invalid path: zbackup.git
by Felix Braun 10 Jun '15

10 Jun '15

Hi there, I'm trying to port the (one) package I'm maintaining over to AUR4 as per the instructions in the wiki. I have successfully created a new keypair and uploaded the public part to my account. I have also created a new Host entry in my .ssh/config (so that I can access my alternative ssh-key. -------------------- Host aur HostName aur4.archlinux.org User aur IdentityFile /home/hazzl/.ssh/aur_rsa IdentitiesOnly yes --------------------- I can now run $ ssh aur list-repos *zbackup and correctly see my repo listed there. However, cloning the git repo fails. ----------------------- $ git clone aur:zbackup.git cloning 'zbackup' ... git-upload-pack: invalid path: zbackup fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. ------------------------ Can anybody point me to what I'm doing wrong? Strangely enough, my package is not listed on the aur4 webfrontend. Is that the reason, I can't clone? Thanks in advance. Felix

2 1

[aur-general] [AUR4] remove commits in aur4. how?
by SpinFlo 10 Jun '15

10 Jun '15

Hi howto remove (no revert) bad commits and push the change to [aur4]? i want clean a bad commits with their history to clean history. or reset the repo i tired with - git reset HEAD --force - git push but say this message ! [rejected] master -> master (non-fast-forward) error: failed to push some refs to 'ssh+git://aur4.archlinux.org/libqgit2-git.git' hint: Updates were rejected because the tip of your current branch is behind hint: its remote counterpart. Integrate the remote changes (e.g. hint: 'git pull ...') before pushing again. hint: See the 'Note about fast-forwards' in 'git push --help' for details. sorry I'm completely noob with git, and my english doesn't help anything greetings

5 8

[aur-general] Dropping gtkhotkey from [community]
by Felix Yan 10 Jun '15

10 Jun '15

Hi, I am going to drop gtkhotkey from [community] to [unsupported]. It was included as a dependency of synapse, but no longer needed since synapse 0.2.99.1 and is not needed by anything else either. If there is no objection, I will do the move when the new synapse package moves out of [community-testing]. -- Regards, Felix Yan

2 3

[aur-general] Signoff report for [community-testing]
by Arch Website Notification 10 Jun '15

10 Jun '15

=== Signoff report for [community-testing] === https://www.archlinux.org/packages/signoffs/ There are currently: * 0 new packages in last 24 hours * 0 known bad packages * 0 packages not accepting signoffs * 0 fully signed off packages * 13 packages missing signoffs * 6 packages older than 14 days (Note: the word 'package' as used here refers to packages as grouped by pkgbase, architecture, and repository; e.g., one PKGBUILD produces one package per architecture, even if it is a split package.) == Incomplete signoffs for [community] (13 total) == * opencl-headers-2:1.2.20150123-1 (any) 0/2 signoffs * iscan-2.30.1-8 (i686) 0/1 signoffs * python2-netlib-0.12.1-1 (i686) 0/1 signoffs * python2-systemd-220-1 (i686) 0/1 signoffs * shairport-sync-2.2.4-1 (i686) 0/1 signoffs * synapse-0.2.99.1-1 (i686) 0/1 signoffs * virtualbox-modules-lts-4.3.28-2 (i686) 0/1 signoffs * iscan-2.30.1-8 (x86_64) 0/2 signoffs * python2-netlib-0.12.1-1 (x86_64) 0/2 signoffs * python2-systemd-220-1 (x86_64) 0/2 signoffs * shairport-sync-2.2.4-1 (x86_64) 0/2 signoffs * synapse-0.2.99.1-1 (x86_64) 0/2 signoffs * virtualbox-modules-lts-4.3.28-2 (x86_64) 0/2 signoffs == All packages in [community-testing] for more than 14 days (6 total) == * virtualbox-modules-lts-4.3.28-2 (i686), since 2015-05-15 * virtualbox-modules-lts-4.3.28-2 (x86_64), since 2015-05-15 * python2-systemd-220-1 (i686), since 2015-05-25 * python2-systemd-220-1 (x86_64), since 2015-05-25 * synapse-0.2.99.1-1 (i686), since 2015-05-26 * synapse-0.2.99.1-1 (x86_64), since 2015-05-26 == Top five in signoffs in last 24 hours == 1. lcarlier - 1 signoffs 2. eric - 1 signoffs

1 0

[aur-general] Error submitting to aur4
by Alexander Görtz 10 Jun '15

10 Jun '15

Hi, I lately have adopted an aur package "google-authenticator-libpam-git". But if I try to add it to the new aur4 I get: > git-receive-pack: permission denied: nylocx > fatal: Could not read from remote repository. > > Please make sure you have the correct access rights > and the repository exists. I suspect that this is due to the reservation of packages for their old maintainer. Is it possible to transfer the ownership of the package to me in the new aur so I can push the package? Thanks, Alex

2 1

[aur-general] KeyError(key)
by Harley W 10 Jun '15

10 Jun '15

> Can you copy the exact contents of the (error) messages?> FTR, I didn't copy the complete contents of ~/.ssh/id_rsa-aur.pub to my> account page, I had to omit the "username@host" part at the end,> otherwise my key wasn't accepted.> Best, MarcelSorry about that. I'm new to all this :)I hope this fixes the format issues and the sending twice problem. In 'My Account', the public key doesn't end with anything under the form 'username@host'. Here is the error message I'm getting:$ git push origin masterEnter passphrase for key '/home/myusername/.ssh/id_rsa' :...remote: File "hooks/update", line 198, in <module>remote: blob = repo[treeobj.id]remote: File "/usr/lib/python3.4/site-packages/pygit2/repository.py", line 90, in __getitem__remote: raise KeyError(key)remote: KeyError: *there is an encrypted string following this"remote: error: hook declined to update /refs/heads/masterTo ssh://aur@aur4.archlinux.org/savant-git.git ! [remote rejected] master -> master (hook declined)error: failed to push some refs to 'ssh://aur@aur4.archlinux.org/savant-git.git' Thanks for any help,Harley

2 1

Re: [aur-general] Adding a git package to AUR4
by Harley W 09 Jun '15

09 Jun '15

Just tried the git filter-branch solution, which got rid of the SRCINFO error, however now i get a KeyError... I believe this may be related to the SSH public key, however I'm not sure how I got that wrong. I just copied what was in my .ssh/id_rsa.pub to the public key field in my AUR account. Thanks for the help. Sent from my Samsung device -------- Original message -------- From: Ido Rosen <ido(a)kernel.org> Date: 06-09-2015 5:05 PM (GMT-05:00) To: "Discussion about the Arch User Repository (AUR)" <aur-general(a)archlinux.org> Subject: Re: [aur-general] Adding a git package to AUR4 On Tue, Jun 9, 2015 at 5:00 PM, Harley W <harleyw(a)hotmail.com> wrote: > Hello,I'm having a lot of trouble transferring my package to AUR4. It is a git package, so after trying for about an hour to get it to work the way that is described on the wiki page, I thought I could try to push it to a separate remote repository (the aur4 repository). Is there a way to do this? I tried > $ git add remote aur4 aur4.archlinux.org/savant-git.git$ git add *$ git commit -m "Initial upload to aur4"$ git push aur4 master > Which said, as I expected, that aur4.archlinux.org/savant-git.git does not appear to be a git repository. Is there a way to accomplish it this way? > If not, the issue I was having in the method described in the wiki was that it would keep telling me:remote: error: missing .SRCINFOEven though I committed it and I copied it into pretty much every directory, I don't understand this at all. > Sorry about this question, I am still quite new to git and I've never dealt with SSH before.Thanks for any help. Try: pacman -Sy pkgbuild-introspection git filter-branch -f --tree-filter "test -f .SRCINFO || mksrcinfo" This will go through the current branch and, if no .SRCINFO exists in a commit, create one and edit the commit (rewriting history). This is part of what my script[1] does. Ido [1] https://github.com/ido/packages-archlinux/blob/master/bin/import-to-aur4.sh

2 1

Re: [aur-general] Adding a git package to AUR4
by Harley W 09 Jun '15

09 Jun '15

Just tried the git filter-branch solution, which got rid of the SRCINFO error, however now i get a KeyError... I believe this may be related to the SSH public key, however I'm not sure how I got that wrong. I just copied what was in my .ssh/id_rsa.pub to the public key field in my AUR account. Thanks for the help. Sent from my Samsung device -------- Original message -------- From: Ido Rosen <ido(a)kernel.org> Date: 06-09-2015 5:05 PM (GMT-05:00) To: "Discussion about the Arch User Repository (AUR)" <aur-general(a)archlinux.org> Subject: Re: [aur-general] Adding a git package to AUR4 On Tue, Jun 9, 2015 at 5:00 PM, Harley W <harleyw(a)hotmail.com> wrote: > Hello,I'm having a lot of trouble transferring my package to AUR4. It is a git package, so after trying for about an hour to get it to work the way that is described on the wiki page, I thought I could try to push it to a separate remote repository (the aur4 repository). Is there a way to do this? I tried > $ git add remote aur4 aur4.archlinux.org/savant-git.git$ git add *$ git commit -m "Initial upload to aur4"$ git push aur4 master > Which said, as I expected, that aur4.archlinux.org/savant-git.git does not appear to be a git repository. Is there a way to accomplish it this way? > If not, the issue I was having in the method described in the wiki was that it would keep telling me:remote: error: missing .SRCINFOEven though I committed it and I copied it into pretty much every directory, I don't understand this at all. > Sorry about this question, I am still quite new to git and I've never dealt with SSH before.Thanks for any help. Try: pacman -Sy pkgbuild-introspection git filter-branch -f --tree-filter "test -f .SRCINFO || mksrcinfo" This will go through the current branch and, if no .SRCINFO exists in a commit, create one and edit the commit (rewriting history). This is part of what my script[1] does. Ido [1] https://github.com/ido/packages-archlinux/blob/master/bin/import-to-aur4.sh

1 0

[aur-general] How to install wine packages the require drive_c system wide?
by Storm Dragon 09 Jun '15

09 Jun '15

Hi, I am thinking of packaging some audio games. The problem is, they will require a sapi5 voice to work. I can create a package for that too, except I think it requires something like c:\System32. Is there a way to do this system wide instead of using a ~/.wine prefix? Thanks Storm -- Powered by Arch Linux! I am registered Linux user number 508465: https://linuxcounter.net/user/508465.html My blog, Thoughts of a Dragon: http://www.stormdragon.tk/ get my public PGP key: gpg --keyserver wwwkeys.pgp.net --recv-key 43DDC193 Free and open source social networking, get your account TODAY! http://social.2mb.solutions/main/register How many Internet mail list subscribers does it take to change a lightbulb? http://goo.gl/eO4PJ "Shine glorious we ride, we stare into the blackened sky. Save the last command, the virtue blinding." DragonForce - The Last Journey Home

3 2