- Aur-general - lists.archlinux.org

[aur-general] Signoff report for [community-testing]
by Arch Website Notification 30 May '15

30 May '15

=== Signoff report for [community-testing] === https://www.archlinux.org/packages/signoffs/ There are currently: * 2 new packages in last 24 hours * 0 known bad packages * 0 packages not accepting signoffs * 0 fully signed off packages * 14 packages missing signoffs * 6 packages older than 14 days (Note: the word 'package' as used here refers to packages as grouped by pkgbase, architecture, and repository; e.g., one PKGBUILD produces one package per architecture, even if it is a split package.) == New packages in [community-testing] in last 24 hours (2 total) == * shairport-sync-2.2.4-1 (i686) * shairport-sync-2.2.4-1 (x86_64) == Incomplete signoffs for [community] (14 total) == * freecad-0.15.4671-3 (i686) 0/1 signoffs * opencascade-6.9.0-1 (i686) 0/1 signoffs * python-tornado-4.2.0-1 (i686) 0/1 signoffs * python2-systemd-220-1 (i686) 0/1 signoffs * shairport-sync-2.2.4-1 (i686) 0/1 signoffs * synapse-0.2.99.1-1 (i686) 0/1 signoffs * virtualbox-modules-lts-4.3.28-2 (i686) 0/1 signoffs * freecad-0.15.4671-3 (x86_64) 0/2 signoffs * opencascade-6.9.0-1 (x86_64) 0/2 signoffs * python-tornado-4.2.0-1 (x86_64) 0/2 signoffs * python2-systemd-220-1 (x86_64) 0/2 signoffs * shairport-sync-2.2.4-1 (x86_64) 0/2 signoffs * synapse-0.2.99.1-1 (x86_64) 0/2 signoffs * virtualbox-modules-lts-4.3.28-2 (x86_64) 0/2 signoffs == All packages in [community-testing] for more than 14 days (6 total) == * freecad-0.15.4671-3 (i686), since 2015-05-15 * opencascade-6.9.0-1 (i686), since 2015-05-15 * freecad-0.15.4671-3 (x86_64), since 2015-05-15 * opencascade-6.9.0-1 (x86_64), since 2015-05-15 * virtualbox-modules-lts-4.3.28-2 (i686), since 2015-05-15 * virtualbox-modules-lts-4.3.28-2 (x86_64), since 2015-05-15 == Top five in signoffs in last 24 hours ==

1 0

[aur-general] Signoff report for [community-testing]
by Arch Website Notification 29 May '15

29 May '15

=== Signoff report for [community-testing] === https://www.archlinux.org/packages/signoffs/ There are currently: * 0 new packages in last 24 hours * 0 known bad packages * 0 packages not accepting signoffs * 0 fully signed off packages * 12 packages missing signoffs * 0 packages older than 14 days (Note: the word 'package' as used here refers to packages as grouped by pkgbase, architecture, and repository; e.g., one PKGBUILD produces one package per architecture, even if it is a split package.) == Incomplete signoffs for [community] (12 total) == * freecad-0.15.4671-3 (i686) 0/1 signoffs * opencascade-6.9.0-1 (i686) 0/1 signoffs * python-tornado-4.2.0-1 (i686) 0/1 signoffs * python2-systemd-220-1 (i686) 0/1 signoffs * synapse-0.2.99.1-1 (i686) 0/1 signoffs * virtualbox-modules-lts-4.3.28-2 (i686) 0/1 signoffs * freecad-0.15.4671-3 (x86_64) 0/2 signoffs * opencascade-6.9.0-1 (x86_64) 0/2 signoffs * python-tornado-4.2.0-1 (x86_64) 0/2 signoffs * python2-systemd-220-1 (x86_64) 0/2 signoffs * synapse-0.2.99.1-1 (x86_64) 0/2 signoffs * virtualbox-modules-lts-4.3.28-2 (x86_64) 0/2 signoffs == Top five in signoffs in last 24 hours == 1. eworm - 1 signoffs

1 0

[aur-general] [Aur4] translations in transifex
by Pablo Lezaeta Reyes 29 May '15

29 May '15

I noticed that aur4 have some new strings but the transifex page has not pudated they string in a whole and also there are new complate and +50% languages. Is planed to update the transifex sometime soon? and the lang selector in home page of aur now will use the native name instead of ca_CA or fo_BA? -- *Pablo Lezaeta*

2 2

[aur-general] Ho to update .SRCINFO without creating a tarball?
by Manuel Reimer 28 May '15

28 May '15

Hello, I'm doing my first steps with AUR 4.0 and I'm asked to commit both, PKGBUILD and .SRCINFO. .SRCINFO is automatically created with "makepkg --source", but there is no need for a tarball when pushing to GIT. So what I think that would be useful is something like "makepkg --upgradesrcinfo" or something like that. I something like this already available? Manuel

7 16

[aur-general] Signoff report for [community-testing]
by Arch Website Notification 28 May '15

28 May '15

=== Signoff report for [community-testing] === https://www.archlinux.org/packages/signoffs/ There are currently: * 2 new packages in last 24 hours * 0 known bad packages * 0 packages not accepting signoffs * 0 fully signed off packages * 19 packages missing signoffs * 0 packages older than 14 days (Note: the word 'package' as used here refers to packages as grouped by pkgbase, architecture, and repository; e.g., one PKGBUILD produces one package per architecture, even if it is a split package.) == New packages in [community-testing] in last 24 hours (2 total) == * python-tornado-4.2.0-1 (i686) * python-tornado-4.2.0-1 (x86_64) == Incomplete signoffs for [community] (19 total) == * salt-2015.5.1-1 (any) 0/2 signoffs * freecad-0.15.4671-3 (i686) 0/1 signoffs * gambas3-3.7.1-2 (i686) 0/1 signoffs * gdal-1.11.2-5 (i686) 0/1 signoffs * opencascade-6.9.0-1 (i686) 0/1 signoffs * pdf2djvu-0.7.21-1 (i686) 0/1 signoffs * python-tornado-4.2.0-1 (i686) 0/1 signoffs * python2-systemd-220-1 (i686) 0/1 signoffs * synapse-0.2.99.1-1 (i686) 0/1 signoffs * virtualbox-modules-lts-4.3.28-2 (i686) 0/1 signoffs * freecad-0.15.4671-3 (x86_64) 0/2 signoffs * gambas3-3.7.1-2 (x86_64) 0/2 signoffs * gdal-1.11.2-5 (x86_64) 0/2 signoffs * opencascade-6.9.0-1 (x86_64) 0/2 signoffs * pdf2djvu-0.7.21-1 (x86_64) 0/2 signoffs * python-tornado-4.2.0-1 (x86_64) 0/2 signoffs * python2-systemd-220-1 (x86_64) 0/2 signoffs * synapse-0.2.99.1-1 (x86_64) 0/2 signoffs * virtualbox-modules-lts-4.3.28-2 (x86_64) 0/2 signoffs == Top five in signoffs in last 24 hours == 1. foutrelis - 3 signoffs 2. bpiotrowski - 2 signoffs

1 0

[aur-general] registration: ssh public key?
by Andrew Dabrowski 27 May '15

27 May '15

I'm trying to register at aur4.archlinux.org but when I submit the form I get an error: "The SSH public key, **, is already in use." Since there's no place to enter my ssh public key, this seems to be an unsolvable chicken and egg problem. Accounts * The SSH public key, **, is already in use. Username: (required) Inactive: Email Address: (required) Real Name: IRC Nick: PGP Key Fingerprint: Language: -- Andrew Dabrowski || ...my suspicion is that the universe is Indiana University || not only queerer than we suppose, but Swain East 117 || queerer than we can suppose. -JBS Haldane

3 3

[aur-general] please adopt package
by Joe Carta 27 May '15

27 May '15

Is anyone interested in adopting this package? It doesn't take much to maintain, as it hasn't been updated in awhile, but it is still very useful to some. I no longer have an Arch installation, so maintenance is difficult. https://aur.archlinux.org/packages/extract-xiso/

3 2

Re: [aur-general] [RFC] Draft of the AUR 4.0.0 migration notification
by Νῖκος Θεοδώρου 27 May '15

27 May '15

On Tue, 26 May 2015 06:24:12 -0600 "Brian F. G. Bidulock" <bidulock(a)openss7.org> wrote: I just realised I did "reply" and not "reply all", so I'm repeating (sorry!) So, again: nikos@Russell:~/Desktop$ mkdir AUR4 nikos@Russell:~/Desktop$ cd AUR4 nikos@Russell:~/Desktop/AUR4$ ssh aur4.archlinux.org setup-repo coolvlviewer setup-repo: package base already exists: coolvlviewer nikos@Russell:~/Desktop/AUR4$ git clone ssh+git://aur4.archlinux.org/coolvlviewer.git/ Cloning into 'coolvlviewer'... warning: You appear to have cloned an empty repository. Checking connectivity... done. nikos@Russell:~/Desktop/AUR4$ cd coolvlviewer/ nikos@Russell:~/Desktop/AUR4/coolvlviewer$ cp ~/AUR/coolvlviewer/* ./ nikos@Russell:~/Desktop/AUR4/coolvlviewer$ mksrcinfo nikos@Russell:~/Desktop/AUR4/coolvlviewer$ ls -la σύνολο 32 drwxr-xr-x 3 nikos users 4096 Μάι 26 19:17 . drwxr-xr-x 3 nikos users 4096 Μάι 26 19:17 .. -rw-r--r-- 1 nikos users 307 Μάι 26 19:17 coolvlviewer.desktop -rw-r--r-- 1 nikos users 876 Μάι 26 19:17 coolvlviewer.install -rw-r--r-- 1 nikos users 63 Μάι 26 19:17 coolvlviewer.launcher drwxr-xr-x 7 nikos users 4096 Μάι 26 19:17 .git -rw-r--r-- 1 nikos users 2621 Μάι 26 19:17 PKGBUILD -rw-r--r-- 1 nikos users 723 Μάι 26 19:17 .SRCINFO nikos@Russell:~/Desktop/AUR4/coolvlviewer$ git filter-branch --tree-filter fatal: Needed a single revision nikos@Russell:~/Desktop/AUR4/coolvlviewer$ git push -u origin master error: src refspec master does not match any. error: failed to push some refs to 'ssh+git://aur4.archlinux.org/coolvlviewer.git/' -- Νῖκος Θεοδώρου «Ἀγεωμέτρητος μηδεὶς εἰσίτω!»

9 12

[aur-general] Some notes on AUR 4.0.0
by Lukas Fleischer 27 May '15

27 May '15

Hi, As Florian already mentioned in another email, I am away until June 1st. I am on a roaming data plan, so I won't be able to reply to all the feedback and questions on the new AUR until then. I hope that I am going to address at least some of the concerns and questions here, though. For the granularity of the Git repositories, having one repository per package (i.e. package base) is a natural choice. The other possibility is to use one single large repository with branches for each package. Florian told me about gitnamespaces, which allows for combining the advantages from both approaches, and I am going to check whether we can easily use it for the AUR when I am back home. Using one repository per maintainer, however, is extremely inconvenient and leads to unnecessary clutter when changing ownership. One of our main objectives is to have full history of all packages and this means that we would need to perform quite cumbersome history import/export operations whenever a package is disowned or adopted. Also, I am not aware of any disadvantages of the "one repository per package" approach apart from merges being inconvenient (which happen much less frequent than package adoptions, however) and the spurious "I don't like many Git repositories." argument. As Florian said, using gitnamespaces will probably lead to better storage efficiency and I am fine with increasing the blob size limit to 250kiB. As described in the notification draft I sent to aur-dev and aur-general on Saturday, packages can only be resubmitted to aur4.archlinux.org by their current AUR maintainer (on aur.archlinux.org) for 4 weeks. That means that it is *not* possible for user2 to submit the package foobar to aur4.archlinux.org if it is maintained by user1 on aur.archlinux.org for that period of time. It *is* possible however, to submit that package if user1 chose not to resubmit foobar until July 8th. The period of 4 + 4 weeks is a tradeoff: Making that period shorter means that users might not have enough time to resubmit their packages, making that period longer means that the maintenance burden of having to update all packages twice is higher. Please also keep in mind that the AUR should be thought of as a place where the community shares packages on a voluntary basis. You maintain AUR packages because you want to share them, not because you want to own them. "Losing" a package to another maintainer isn't the same thing as losing property. If you have any useful tools or scripts to help with the migration process, please feel free to add them to the aur4.archlinux.org section on the wiki. Regards, Lukas

1 1

[aur-general] Signoff report for [community-testing]
by Arch Website Notification 27 May '15

27 May '15

=== Signoff report for [community-testing] === https://www.archlinux.org/packages/signoffs/ There are currently: * 6 new packages in last 24 hours * 0 known bad packages * 0 packages not accepting signoffs * 0 fully signed off packages * 24 packages missing signoffs * 0 packages older than 14 days (Note: the word 'package' as used here refers to packages as grouped by pkgbase, architecture, and repository; e.g., one PKGBUILD produces one package per architecture, even if it is a split package.) == New packages in [community-testing] in last 24 hours (6 total) == * gambas3-3.7.1-2 (i686) * gdal-1.11.2-5 (i686) * pdf2djvu-0.7.21-1 (i686) * gambas3-3.7.1-2 (x86_64) * gdal-1.11.2-5 (x86_64) * pdf2djvu-0.7.21-1 (x86_64) == Incomplete signoffs for [community] (18 total) == * clusterssh-4.03.06-1 (any) 0/2 signoffs * salt-2015.5.1-1 (any) 0/2 signoffs * freecad-0.15.4671-3 (i686) 0/1 signoffs * gambas3-3.7.1-2 (i686) 0/1 signoffs * gdal-1.11.2-5 (i686) 0/1 signoffs * opencascade-6.9.0-1 (i686) 0/1 signoffs * pdf2djvu-0.7.21-1 (i686) 0/1 signoffs * python2-systemd-220-1 (i686) 0/1 signoffs * synapse-0.2.99.1-1 (i686) 0/1 signoffs * virtualbox-modules-lts-4.3.28-2 (i686) 0/1 signoffs * freecad-0.15.4671-3 (x86_64) 0/2 signoffs * gambas3-3.7.1-2 (x86_64) 0/2 signoffs * gdal-1.11.2-5 (x86_64) 0/2 signoffs * opencascade-6.9.0-1 (x86_64) 0/2 signoffs * pdf2djvu-0.7.21-1 (x86_64) 0/2 signoffs * python2-systemd-220-1 (x86_64) 0/2 signoffs * synapse-0.2.99.1-1 (x86_64) 0/2 signoffs * virtualbox-modules-lts-4.3.28-2 (x86_64) 0/2 signoffs == Incomplete signoffs for [unknown] (6 total) == * perl-cpan-changes-0.30-1 (any) 0/2 signoffs * perl-file-finder-0.53-4 (any) 0/2 signoffs * perl-module-manifest-1.08-2 (any) 0/2 signoffs * perl-readonly-2.00-2 (any) 0/2 signoffs * perl-test-distmanifest-1.014-2 (any) 0/2 signoffs * perl-test-perltidy-20130104-2 (any) 0/2 signoffs == Top five in signoffs in last 24 hours ==

1 0