- Aur-general - lists.archlinux.org

[aur-general] Package proprietary softwares with hard-coded paths within /usr/local?
by Chi-Hsuan Yen 08 Aug '17

08 Aug '17

Hello Arch enthusiasts, I'd like to create a package for Pulse Connect Secure, a popular VPN software. Current PKGBUILD can be found at [1]. That package works fine, but it conflicts with Arch's packaging guideline. [2] "Packages should never be installed to /usr/local" The reason I put files in /usr/local is that file paths are apparently hard-coded. Specifically, the VPN frontend (pulseUi) loads assets from /usr/local/pulse/html, and then it invokes /usr/local/pulse/pulsesvc to actually connects to VPN. Is there a workaround for this? Best, Yen Chi Hsuan [1] https://github.com/yan12125/aur/blob/master/pulse-connect-secure/PKGBUILD [2] https://wiki.archlinux.org/index.php/Arch_packaging_standards#Package_etiqu…

5 8

[aur-general] TU Application: Dan Printzell
by Dan Printzell 08 Aug '17

08 Aug '17

Hi Arch people. My name is Dan Printzell, but I often go by Wild/Vild or when I use an old account, WildN00b. I'm writing this TU application because I want to maintain the dlang packages that are currently orphaned or being dropped from [community]. I'm being sponsored by Johannes Löthberg. A little about me. I'm 21 years old programmer from Sweden. I'm currently studying game programming at BTH. On my freetime I'm usually code on my operating system that I'm writing in D from scratch [1]. I usually stream this development on my twitch channel [2]. The first time I touched Linux I believe was back in '08, when I was about 12. I order those free CD with Ubuntu and played around with it a lot. After that I have been switching between Windows and Linux distroes as my main driver depending on if I wanted to be productive and code, or if wanted to play games. I started to use Arch maybe 5-6 years ago, where the latest 4 years I have been using it as my main driver for all my computers. I think I choose Arch because pacman made sense to me compared to apt-{get,cache,whatever}. I created my first package about 3 years ago for my custom bar, but it is long gone after the AUR3 update. Around the same time I started to use dlang as my main language and I started to maintain a few -git packages for the different helper tools, and when the none -git packages got orphaned or dropped from [community] I took over them. If I were to become a TU I would want to maintain all the dlang packages that are orphaned in [community] [3]. I would also like to move these packages to [community]: - dcd [4] - dfmt [5] - dscanner [6] - dub [7] - workspace-d [8] TL;DR I use the D programming language, so I want to maintain it. Thanks Dan Printzell GPG KEY: 0x22E3B67B4A86FDE7 https://github.com/Vild/ https://vild.io/ [1] https://github.com/PowerNex/PowerNex [2] http://twitch.tv/wildn00b/ [3] https://www.archlinux.org/groups/x86_64/dlang/ [4] https://aur.archlinux.org/packages/dcd/ [5] https://aur.archlinux.org/packages/dfmt/ [6] https://aur.archlinux.org/packages/dscanner/ [7] https://aur.archlinux.org/packages/dub/ [8] https://aur.archlinux.org/packages/workspace-d/

10 18

[aur-general] acess scount
by Кирилл Фёдоров 06 Aug '17

06 Aug '17

I can not log into my account. My login: morteryler

3 4

[aur-general] Fwd: AUR Cleanup Day September 20th
by Daniel M. Capella 02 Aug '17

02 Aug '17

Greetings, Let's bring back AUR Cleanup Day. Several people have signed a blood oath^w^w^w^wshowed an interest in participating, and as everyone knows, the AUR needs all the love we can spare. If any TUs could attend, it would be appreciated. See this[] wiki article for cleanup criteria and other details. The event will be all day September 20th -- mark your calendars. Join #archlinux-aur and BYOB. [] https://wiki.archlinux.org/index.php/DeveloperWiki:AUR_Cleanup_Day Best, polyzen PS: A duplicate of this email may show up on the ML in a day or so -- just disregard it. I initially sent this through archlinux.info a day or so ago, and got tired of waiting for it.

1 0

[aur-general] Hello from Jethro, and could someone take a look at my first pkgbuild?
by J3thro 31 Jul '17

31 Jul '17

Hi folks, I am very happy that I finally get the chance to join AUR community and contribute something. I just adopted an orphan AUR package and submitted my first pkgbuild (see https://aur.archlinux.org/packages/pycharm-community/) Is there anyone willing to double check that I didn't make stupid mistakes? Regards,

6 12

[aur-general] missing source file; hook declined update
by Olaf Leidinger 27 Jul '17

27 Jul '17

Dear all, I'm trying to submit the following new PKGBUILD: # Maintainer: Olaf Leidinger <oleid(a)mescharet.de> # # Get the CentOS tarball from https://www.codeplay.com/products/computesuite/computecpp/download pkgname=computecpp pkgver=0.2.1 pkgrel=1 pkgdesc="Accelerates Complex C++ Applications on Heterogeneous Compute Systems using Open Standards" arch=('x86_64') url="https://www.codeplay.com/products/computesuite" license=('EULA') source=("file://ComputeCpp-CE-${pkgver}-CentOS-64bit.tar.gz") sha256sums=('e7e301bcd8906b419d0067c262dc0eac987798da9dbac4763d285c1e9bf8ddec') package() { _pkgbasename=ComputeCpp-CE-${pkgver}-Linux cd "$srcdir" mkdir -p "$pkgdir/opt" mkdir -p "$pkgdir/usr/bin" mkdir -p "$pkgdir/etc/ld.so.conf.d" mv ${_pkgbasename} "$pkgdir/opt" ln -s /opt/${_pkgbasename}/bin/compute++ "$pkgdir/usr/bin" ln -s /opt/${_pkgbasename}/bin/computecpp_info "$pkgdir/usr/bin" echo /opt/${_pkgbasename}/lib > "$pkgdir/etc/ld.so.conf.d/computecpp.conf" } This is the corresponding .SRCINFO file: pkgbase = computecpp pkgdesc = Accelerate Complex C++ Applications on Heterogeneous Compute Systems using Open Standards pkgver = 0.2.1 pkgrel = 1 url = https://www.codeplay.com/products/computesuite arch = x86_64 license = EULA source = file://ComputeCpp-CE-0.2.1-CentOS-64bit.tar.gz sha256sums = e7e301bcd8906b419d0067c262dc0eac987798da9dbac4763d285c1e9bf8ddec pkgname = computecpp On pushing, I get: $ git push --set-upstream origin master Counting objects: 11, done. Delta compression using up to 16 threads. Compressing objects: 100% (11/11), done. Writing objects: 100% (11/11), 1.71 KiB | 0 bytes/s, done. Total 11 (delta 3), reused 0 (delta 0) remote: error: The following error occurred when parsing commit remote: error: 340c3119f9661343b5067bf848aaee0ac56a0028: remote: error: missing source file: ComputeCpp-CE-0.2.1-CentOS-64bit.tar.gz remote: error: hook declined to update refs/heads/master To ssh://aur.archlinux.org/computecpp.git ! [remote rejected] master -> master (hook declined) error: failed to push some refs to 'ssh://aur@aur.archlinux.org/computecpp.git' Any idea what's wrong? According to my research, prepending file:// is the way to go for packages with fetch restriction. Thanks for your insight, Olaf

3 5

[aur-general] Hey everyone,
by Sven-Hendrik Haase 26 Jul '17

26 Jul '17

I'll be on vacation for 2 weeks starting today. Feel free to update my packages. Sven

1 0

[aur-general] TU question
by Dan Printzell 24 Jul '17

24 Jul '17

Hi, my name is Dan and I'm currently reading up on what is needed to become a TU. I'm doing this because I'm interested in maintaining the dlang packages, now that Dicebot left. But before I decide anything I want to know what is needed from me and how the whole process works. So far I've read these links: https://wiki.archlinux.org/index.php/Trusted_Users https://wiki.archlinux.org/index.php/AUR_Trusted_User_Guidelines https://aur.archlinux.org/trusted-user/TUbylaws.html So I was wondering if anyone had any links that I could read or any tips to think about before I decide if I want to take the next step. Thanks Dan Printzell

4 4

[aur-general] Review request, jedit-pkgbuild-edit-mode
by Vitaliy Berdinskikh 15 Jul '17

15 Jul '17

Hi all, this package adds to jedit new edit mode for PKGBUILD file. It needs to highlight syntax. PKGBUILD ++++++ # Maintainer: Vitaliy Berdinskikh <ur6lad at gmail dot com> pkgname=jedit-pkgbuild-edit-mode pkgver=1 pkgrel=1 pkgdesc='jEdit PKGBUILD edit mode' arch=('any') url='https://bitbucket.org/ur6lad/jedit-pkgbuild' license=('GPL') depends=('jedit') makedepends=('xmlstarlet') install=jedit-pkgbuild-edit-mode.install source=('catalog.dtd', 'pkgbuild.xml') md5sums=() package() { mkdir -p $pkgdir/usr/share/$pkgname mkdir -p $pkgdir/usr/share/java/jedit/modes install -m 644 $srcdir/catalog.dtd $pkgdir/usr/share/jedit/modes/catalog.dtd install -m 644 $srcdir/pkgbuild.xml $pkgdir/usr/share/jedit/modes/pkgbuild.xml } ++++++ and the install script ++++++ post_install() { ln -s /usr/share/jedit-pkgbuild-edit-mode/catalot.dtd catalog.dtd ln -s /usr/share/java/jedit/modes/catalog catalog.xml xmlstarlet sel -Q -t -c //MODE[@FILE_NAME_GLOB=\"PKGBUILD\"] catalog.xml && xmlstarlet ed -L -d //MODE[@FILE_NAME_GLOB=\"PKGBUILD\"] catalog.xml xmlstarlet ed -s /MODES -t elem -n MODE -i //MODE[last()] -t attr -n NAME -v PKGBUILD -i //MODE[last()] -t attr -n FILE -v pkgbuild.xml -i //MODE[last()] -t attr -n FILE_NAME_GLOB -v PKGBUILD > /usr/share/java/jedit/modes/catalog rm catalog.dtd catalog.xml } pre_remove() { ln -s /usr/share/jedit-pkgbuild-edit-mode/catalot.dtd catalog.dtd xmlstarlet ed -L -d //MODE[@FILE_NAME_GLOB=\"PKGBUILD\"] catalog.xml rm catalog.dtd } ++++++ -- Regards, Vitaliy Berdikskikh AKA UR6LAD <http://ur6lad.co.ua/> 73!

3 4

[aur-general] reconfigure netwerk settings
by mick howe 12 Jul '17

12 Jul '17

I've just changed ISP and the modem is setup to live at 192.168.20.1/24 which I have found is out of scope for my current address range of 192.168.1.100/24, using static IPs. I have followed the instructions in the wiki for configuring static IPs and changed all the settings I needed to get the network working through the new ISP but once I reboot some of the settings have reverted to those for the old ISP and I can't work out how to make ALL the changes stick. mick in glen innes

2 2