February 2011 - Arch-general - lists.archlinux.org

[arch-general] [boost/boost-libs] PKGBUILD update for 1.46.0 + many improvements
by Thomas Dziedzic 27 Feb '11

27 Feb '11

Hey, this is mainly targeted at the maintainers of boost/boost-libs, but others are free to check it out, I have reworked the PKGBUILD for boost/boost-libs and I have managed to update the beast to 1.46.0 I have a full file [1] and a diff [2] against the previous version (1.45.0). I have also built the PKGBUILD for both i686 and x86_64 in clean chroots and provided the results [3]. Notable changes include: * bump version to 1.46.0 * enable icu support in regex * fix FS#22370 - [boost] does not include MPI [4] * fix FS#22471 - [boost-libs] no libboost_thread.so [5] * minor PKGBUILD cleanups Disabling single thread building and just building the multithreaded libs cut the number of files in boost-libs by about a half :) I was also told by upstream there isn't a need for enabling single threaded support. The only boost bug open is FS#22178 - [boost/boost-libs] Support for Python 3 [6] and I tried enabling support, but got errors, so it will just have to wait. Upstream doubts they support the latest python3.2, which I was told in irc. [1] - http://pkgbuild.com/~td123/boost/PKGBUILD [2] - http://pkgbuild.com/~td123/boost/PKGBUILD.diff [3] - http://pkgbuild.com/~td123/boost/ [4] - https://bugs.archlinux.org/task/22370 [5] - https://bugs.archlinux.org/task/22471 Cheers!

1 0

[arch-general] syslog-ng makes a kernel WARNING in 2.6.38
by Damjan 27 Feb '11

27 Feb '11

I'm running a self compiled 2.6.38-rc6-00113-g4662db4 on my 64bit desktop, and I get a nasty warning in dmesg complaining about capabilities. Is this a syslog-ng issue, or something with the package in Arch, or maybe I need to setup some capabilities to the binary? syslog-ng is 3.2.2-1, the full kernel warning is below, but afaik most important is: Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated). ------------[ cut here ]------------ WARNING: at kernel/printk.c:288 do_syslog+0xc1/0x510() Hardware name: A780GM-A Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated). Modules linked in: usb_storage uas joydev usbhid hid btusb bluetooth rfkill sp5100_tco snd_seq_dummy snd_hda_cod ec_hdmi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device atl1 mii snd_pcm_oss snd_mixer_oss snd_hda_codec_i dt floppy edac_core edac_mce_amd ohci_hcd ehci_hcd i2c_piix4 usbcore snd_hda_intel snd_hda_codec snd_hwdep snd_p cm snd_timer snd soundcore snd_page_alloc evdev pcspkr shpchp pci_hotplug sg button thermal k8temp ip_tables x_t ables fuse kvm_amd kvm powernow_k8 freq_table processor mperf ext4 mbcache jbd2 crc16 sd_mod sr_mod cdrom pata_a cpi ahci libahci pata_atiixp libata scsi_mod radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core cfbcopyarea cfb imgblt cfbfillrect Pid: 3082, comm: syslog-ng Not tainted 2.6.38-rc6-00113-g4662db4 #5 Call Trace: [<ffffffff81056afa>] ? warn_slowpath_common+0x7a/0xb0 [<ffffffff81056bd1>] ? warn_slowpath_fmt+0x41/0x50 [<ffffffff811bc154>] ? security_capable+0x24/0x30 [<ffffffff81057db1>] ? do_syslog+0xc1/0x510 [<ffffffff8119ca47>] ? kmsg_open+0x17/0x20 [<ffffffff811917e3>] ? proc_reg_open+0xa3/0x190 [<ffffffff8119ca30>] ? kmsg_open+0x0/0x20 [<ffffffff8119ca10>] ? kmsg_release+0x0/0x20 [<ffffffff81191740>] ? proc_reg_open+0x0/0x190 [<ffffffff81137ac0>] ? __dentry_open+0x100/0x370 [<ffffffff81143cbe>] ? generic_permission+0x1e/0xc0 [<ffffffff81138d61>] ? nameidata_to_filp+0x71/0x80 [<ffffffff81147c18>] ? finish_open+0xc8/0x1b0 [<ffffffff81147422>] ? do_path_lookup+0x82/0x160 [<ffffffff81148359>] ? do_filp_open+0x259/0x800 [<ffffffff810bb270>] ? call_rcu+0x10/0x20 [<ffffffff81154bd4>] ? alloc_fd+0xf4/0x150 [<ffffffff8120064d>] ? strncpy_from_user+0x2d/0x40 [<ffffffff81138dd4>] ? do_sys_open+0x64/0x110 [<ffffffff81138e9b>] ? sys_open+0x1b/0x20 [<ffffffff8100bdd2>] ? system_call_fastpath+0x16/0x1b ---[ end trace 52dc0a1402a3a0af ]--- -- дамјан

3 2

[arch-general] aplay ignoring CONT
by Jorge Almeida 26 Feb '11

26 Feb '11

In case someone is using aplay: It seems that aplay is ignoring a CONT signal. After interrupting with Ctrl-Z or with kill -s STOP, I can't resume playing. I have to kill the process with Ctrl-C or with kill -9. A couple of days ago aplay worked fine. I have an up to date system as of 15m ago. I also checked that my sound setup is ok: xmms works fine. Can somebody confirm this problem? Note that aplay works normally unless it is suspended. Jorge Almeida

1 0

[arch-general] Problems with nvidia card
by Ondřej Kučera 26 Feb '11

26 Feb '11

Hello, I have a fresh Arch Linux installation on a Lenovo T410 laptop which has the following graphics card: 01:00.0 VGA compatible controller: nVidia Corporation GT218 [NVS 3100M] (rev a2) At first I tried the nouveau driver, following the description on https://wiki.archlinux.org/index.php/Nouveau. Using this driver, the X server "freezes" every couple of hours (sometimes once a day, sometimes five times a day): mouse pointer moves around the screen, even music keeps playing but mouse clicking has no effect and neither has keyboard typing. I tried suspending desktop effects in KDE, then I even uninstalled nouveau-dri but it keeps happening anyway. This is what I found in /var/log/Xorg.log in some cases: [ 49693.881] [mi] EQ overflowing. The server is probably stuck in an infinite loop. [ 49693.940] Backtrace: [ 49694.120] 0: /usr/bin/X (xorg_backtrace+0x28) [0x49f718] [ 49694.120] 1: /usr/bin/X (mieqEnqueue+0x1f4) [0x49eb14] [ 49694.120] 2: /usr/bin/X (xf86PostKeyEventP+0x67) [0x47c0d7] [ 49694.120] 3: /usr/bin/X (xf86PostKeyboardEvent+0x19) [0x47c249] [ 49694.121] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f9b0f6de000+0x4700) [0x7f9b0f6e2700] [ 49694.121] 5: /usr/bin/X (0x400000+0x698e7) [0x4698e7] [ 49694.121] 6: /usr/bin/X (0x400000+0x118a93) [0x518a93] [ 49694.121] 7: /lib/libpthread.so.0 (0x7f9b13dfa000+0xf150) [0x7f9b13e09150] [ 49694.121] 8: /lib/libc.so.6 (ioctl+0x7) [0x7f9b12e28aa7] [ 49694.122] 9: /usr/lib/libdrm.so.2 (drmIoctl+0x28) [0x7f9b115e7268] [ 49694.122] 10: /usr/lib/libdrm.so.2 (drmCommandWrite+0x1b) [0x7f9b115e959b] [ 49694.122] 11: /usr/lib/libdrm_nouveau.so.1 (0x7f9b10fa7000+0x2ead) [0x7f9b10fa9ead] [ 49694.122] 12: /usr/lib/libdrm_nouveau.so.1 (nouveau_bo_map_range+0xfe) [0x7f9b10faa4ce] [ 49694.122] 13: /usr/lib/libdrm_nouveau.so.1 (0x7f9b10fa7000+0x1f3d) [0x7f9b10fa8f3d] [ 49694.122] 14: /usr/lib/libdrm_nouveau.so.1 (nouveau_pushbuf_flush+0x1af) [0x7f9b10fa953f] [ 49694.122] 15: /usr/lib/xorg/modules/libexa.so (0x7f9b10b6c000+0x9165) [0x7f9b10b75165] [ 49694.122] 16: /usr/lib/xorg/modules/libexa.so (0x7f9b10b6c000+0xbd31) [0x7f9b10b77d31] [ 49694.122] 17: /usr/bin/X (0x400000+0xd7c17) [0x4d7c17] [ 49694.122] 18: /usr/bin/X (0x400000+0x1674f7) [0x5674f7] [ 49694.122] 19: /usr/bin/X (miCompositeRects+0x7a) [0x5675ea] [ 49694.122] 20: /usr/bin/X (0x400000+0xd06f0) [0x4d06f0] [ 49694.122] 21: /usr/bin/X (0x400000+0x2d201) [0x42d201] [ 49694.122] 22: /usr/bin/X (0x400000+0x2131e) [0x42131e] [ 49694.122] 23: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f9b12d7adcd] [ 49694.122] 24: /usr/bin/X (0x400000+0x20ec9) [0x420ec9] So I thought I'd try the nvidia binary driver. At the first sight fonts look different, much larger (and although I don't know why a driver change should result in bigger fonts, I can tweak this later) but for some reason KDE now tells me this: The audio playback device HDA Intel (CONEXANT Analog) does not work. Falling back to . Which results in no sound working at all. When I try running alsamixer, I get the following: cannot open mixer: No such file or directory When I try to switch to one of the virtual terminals (e.g. Ctrl+Alt+F1), alsamixer runs fine, when I switch back to X, it fails again, so clearly nvidia messes with that somehow. I'm unable to find anything relevant in the log files but I probably just don't know what to look for. At this point I don't really care which driver to choose (although I'd probably prefer a solution based on nouveau) but please, does anyone have a suggestion what to try to have both stable X.org and working sound? Thank you. Ondřej Kučera -- Cheers, Ondřej Kučera

1 0

Re: [arch-general] Kernel Panic on x64 when writting to 1TB
by Victor Silva 25 Feb '11

25 Feb '11

Folks I downgraded my kernel to 2 versions prior, I think from r5 to r3 and now the problem SEEMS to be gone, as I did not do any other modification I assume this was the issue. Still i'm doing some more tests. Regards, Victor

2 2

[arch-general] Adding AUR packages to [community] packages' provides
by Lukas Fleischer 25 Feb '11

25 Feb '11

Well, I'm addressing current blacklisting issues with the AUR [1]. I noticed that some of the packages in the official repos have AUR packages as provides, some of them (well, at least one of them, didn't search for more) were even added due to FRs [2]. Donnu if this applies to [core] and [extra] as well. Is that regular practice? Imho, we shouldn't do that. The AUR is something to be considered separately. If we start to care about provides/conflicts with AUR packages, we'll need to add all "-devel"/"-svn"/"-git"/"-beta" packages in the AUR to the official packages conflicts and provides as well. And we'll need to start searching for alternative repos to ensure there's no conflict with our official packages. Seriously, we should be consistent here. [1] http://mailman.archlinux.org/pipermail/aur-general/2011-February/013811.html [2] https://bugs.archlinux.org/task/16495

1 0

Re: [arch-general] [trinity-devel] x86_64 kdesktop.kcrash [SOLVED - it is glibc]
by David C. Rankin 25 Feb '11

25 Feb '11

On 02/21/2011 08:41 PM, David C. Rankin wrote: > On 02/21/2011 05:09 PM, PICCORO McKAY Lenz wrote: >> uff i reading this >> http://lists.freedesktop.org/archives/xcb/2010-March/005818.html and >> seem like that! >> >> any help fron anybody here! >> > > I'll follow up there. I can't believe that an libxcb problem would still be > around a year later. <snip> Guys, The problem is glibc-2.13-4. I have about 5 Arch/Trinity Virtualbox VMs. On one I had not updated, I started Trinity x86_64 and there was NO kdesktop crash. I then proceeded to update the VM to the current Arch packages which included: [2011-02-22 11:13] Generating locales... [2011-02-22 11:13] en_US.UTF-8... done [2011-02-22 11:13] en_US.ISO-8859-1... done [2011-02-22 11:13] Generation complete. [2011-02-22 11:13] upgraded glibc (2.13-3 -> 2.13-4) <snip> [2011-02-22 11:17] upgraded kernel26 (2.6.37-6 -> 2.6.37.1-1) [2011-02-22 11:17] upgraded kernel26-headers (2.6.37-6 -> 2.6.37.1-1) <snip> [2011-02-22 11:18] upgraded trinity-kdelibs (1220926-1 -> 1222098-1) [2011-02-22 11:18] upgraded trinity-kdebase (1221507-1 -> 1221588-1) On next reboot/restart, I got the kdesktop.kcrash (attached). So then I downgraded glibc (2.13-4 -> 2.13-3), restarted Trinity -> perfect No kdesktop,kcrash. It looks like this is a glibc issue, so I'll follow up (below) with Arch to make sure it looks like glibc and not a package issue. Thanks for your help. cc: arch-general Arch devs - Do you think this could be a packaging/patch issue with Arch, or do you think is going to be glibc itself? It looks like glibc to me, but I thought I'd ask first before going to the glibc folks. -- David C. Rankin, J.D.,P.E.

6 18

[arch-general] gimp ufraw update
by Philipp 24 Feb '11

24 Feb '11

Hi there. I'm playing with digital photos atm., found ufraw and found that it's out of date since a long while. Here's my take on updating it: # $Id: PKGBUILD 96307 2010-10-19 21:03:01Z ibiru $ # Maintainer: Tobias Kieslich <tobias(a)archlinux.org> pkgname=gimp-ufraw _srcname=ufraw pkgver=0.18 pkgrel=1 pkgdesc="Standalone or gimp plugin converter for raw files" url="http://ufraw.sourceforge.net/" arch=('i686' 'x86_64') license=('GPL2') depends=('gtkimageview' 'exiv2' 'lensfun') makedepends=('gimp' 'cinepaint' 'pkgconfig') optdepends=('gimp: to use the gimp import plugin for raw images' 'cinepaint: to use the cinepaint import plugin for raw images') source=(http://downloads.sourceforge.net/${_srcname}/${_srcname}-${pkgver}.… md5sums=('454f40a402928998a82e2645d9265d96') build() { cd "${srcdir}/${_srcname}-${pkgver}" ./configure --prefix=/usr \ --enable-extras \ --enable-mime \ --enable-openmp make } package() { cd ${srcdir}/${_srcname}-${pkgver} make DESTDIR="${pkgdir}" install rm -f ${pkgdir}/usr/bin/dcraw } Lensfun is a new dependency, not sure it is needed (http://ufraw.sourceforge.net/index.html) The last configure option simply didn't exist and I removed the sed line (assuming upstream know what they're doing). In my opinion the package name should be ufraw rather than gimp-ufraw since this package enables ufraw standalone, in batch-mode and as 'plug-in' for cinepaint and gimp. HTH Philipp

3 2

[arch-general] Updated kdemod3 built on Trinity Stable (3.5.12) available - Thanks to Albert Vaca
by David C. Rankin 23 Feb '11

23 Feb '11

Guys, Albert Vaca has built kdemod3 updates with the Trinity 3.5.12 (stable) code base. The repository for the binaries is: [kdemod3] Server = http://rapinjam.com/beta/lefa/kdemod3/i686/ or [kdemod3] Server = http://rapinjam.com/beta/lefa/kdemod3/x86_64/ I updated an i686 box last night after adding the repository with: pacman -S kdemod3-complete <snip> Total Download Size: 172.53 MB Total Installed Size: 582.04 MB <snip> checking package integrity... (155/155) checking for file conflicts [####################################################] 100% <snip> (155/155) installing kdemod3-tools [####################################################] 100% Restart the desktop and you will be greeted with the Trinity 3.5.12 initial setup dialog. Everything seems to run fine. I'll have more time to work with the desktop later today and tomorrow. If you are interested in trying it, you can simply add the repo and install the binaries. The thanks goes to Albert for his effort. I've been working with the svn (3.5.13 development) code. It was just coincidence that Albert and I ended up in somewhat the same place at the same time :) This grew out of the old forum thread: https://bbs.archlinux.org/viewtopic.php?id=97612&p=4 -- David C. Rankin, J.D.,P.E.

1 0

Re: [arch-general] [arch-dev-public] [signoff] util-linux 2.19-3
by Uli Armbruster 23 Feb '11

23 Feb '11

On Tue, Feb 22, 2011 at 1:33 PM, Ionuț Bîru <ibiru(a)archlinux.org> wrote: > On 02/22/2011 02:13 PM, Thomas Bächler wrote: > >> Am 22.02.2011 12:35, schrieb Ionuț Bîru: >> >>> Hi, >>> >>> The util-linux-ng project has been renamed back to util-linux. >>> >> >> Why 2.19-3? Shouldn't it be -1? >> > > because tpowa uploaded a broken -1 and i only fixed it. > > -1 had no versioned provider for util-linux-ng and an update wasn't > possible, it had a missing .install. all of them fixed in -2. > > after that i noticed that ipc info file is not generate and the .install > command was failing because of that. the ipc doc file was dropped by > upstream. this was fixed in -3. > > > >> partx(8): >>> - this command has been rewritten to use libblkid for partition tables >>> parsing. It supports aix, bsd, dos, gpt, mac, minix, sgi, >>> solaris_x86, sun, >>> ultrix and unixware now. >>> >>> - supports new command line option "--show" to list partitions in new >>> format >>> >>> - prints UUID and name for GPT and mac partitions >>> >> >> One highlight for me: partx should now work on loop devices (or other >> devices that don't support drive geometry calls). >> >> For a complete list of changes see docs/v2.19-ReleaseNotes >>> >>> Packaging differences between util-linux-ng 2.18: >>> [...] >>> * tpowa changes --enable-libmount-mount link mount(8) with libmount >>> (EXPERIMENTAL) >>> >> >> Is that a good idea already? We will have to see. >> >> That change was already committed by tpowa in 2.19-1 and i didn't touch > it. > > > I also hope you removed all the patches we had in 2.18. >> >> > already removed by twopa in 2.19-1 > > What have i done for this package is only to fix what tpowa committed. > > > > -- > Ionuț > I did get the following output when I updated. Proceed with installation? [Y/n] :: Retrieving packages from testing... util-linux-2.19-2-i686 1388.8K 987.1K/s 00:00:01 [-----------------------------------] 100% checking package integrity... (1/1) checking for file conflicts [-----------------------------------] 100% (1/1) removing util-linux-ng [-----------------------------------] 100% (1/1) installing util-linux [-----------------------------------] 100% error: command failed to execute correctly Optional dependencies for util-linux perl: for chkdupexe support

6 8