- Arch-general - lists.archlinux.org

[arch-general] Recent logwatch update may need a news item?
by Amish 20 Sep '19

20 Sep '19

Hello, Recently logwatch package was updated. The cron file (from cron.daily) was removed and replaced with systemd.timer. But logwatch.timer is not activated automatically, which means the users who use logwatch will stop getting daily "auditing" emails and may not realize this for some days that emails from logwatch have stopped coming. This requires manual intervention to activate logwatch.timer. Since keeping an eye on logs is very important thing to do, this should be put as NEWS item. (in my opinion). Additionally, current logwatch.service calls "/usr/sbin/logwatch" alone. Which means by default it sends output to systemd journal. (whereas cron based timer used to send an email to root which could be an alias to real email address) To preserve the existing behaviour, the ExecStart line should be changed to ExecStart=/usr/bin/logwatch --output mail" Even if this is not made a news item, this email is also sent to alert those users who use logwatch that they need to take following actions: 1) pacman -Syu 2) cat /usr/lib/systemd/system/logwatch.service.d/local.conf [Service] ExecStart= ExecStart=/usr/bin/logwatch --output mail 3) systemctl daemon-reload 4) systemctl --now enable logwatch.timer Regards, Amish.

3 5

[arch-general] Fwd: High lag in graphical applications
by Yurii Kolesnykov 19 Sep '19

19 Sep '19

For some GPU stress-tests you may use furmark, it's provided by `gputest` in AUR. чт, 19 вер. 2019, 19:23 користувач L. Rose <lists(a)lrose.de> пише: > > > On 19 September 2019 17:29:05 CEST, hw <hw(a)adminart.net> wrote: > > > >At least NVIDIA graphics cards can go bad in that they can cause > >temporary > >hangs, accompanied by log messages, indicating that the GPU is damaged. > > Where would I find such logs? I couldn't find anything in dmesg so far. > > >So perhaps if you were to stress-test the graphics card, or if you were > >to use > >the other card instead, you might be able to see some interesting > >results. > > What kind of stress test comes to your mind? >

1 0

[arch-general] New install second drive issue
by pete 16 Sep '19

16 Sep '19

Morning folks I have just done a complete new install on a new drive , That is all working now fine . My problem comes when trying to include another drive on the system , it just refuses to boot fully , I get a message unable to mount sda2 now sda2 mounts , /dev/sda2 on / type xfs (rw,relatime,attr2,inode64,noquota) when just the one drive is in the system but as soon as i connect it refuses to to boot fully and drops out to an emergency shell that is locked up solid i. I have set the working drive in the bios this is an older motherboard with an AMD Phenome quad core CPU . $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 1.8T 0 disk ├─sda1 8:1 0 300M 0 part /boot ├─sda2 8:2 0 40G 0 part / ├─sda3 8:3 0 4G 0 part [SWAP] └─sda4 8:4 0 1.8T 0 part /home sr0 11:0 1 1024M 0 rom the drive order in the bios is set correctly not that it makes much difference these days . I am stuck right now i need to be able to include the old drive to recover data from it . Any ideas folks .. Pete .

7 8

[arch-general] Time and date in 24 hour time can this be fixed?
by matthew dyer 16 Sep '19

16 Sep '19

Hi all, I am using arch linux with orca and mate desktop and have a strange problem or bug or something and was wondering if there was a way to fix it or work around it. I am using the America/New_York time zone so my time shows correctly at least according to orca. Orca gives me the time in 12 Hour format which is what I want, but when I look at an email such as in thunderbird, the time and date are given 24 hour format for example, 2019/14/09 11:00 rather than the u.s format I am used to. I read through the arch wiki and could not find anything on how to change the time format on the clock. Any ideas on how to change this? HW clock is set to UTC if that has anything to do with it. I tried to set it to locale time, but that messed up the system clock so had to switch it back. Thanks all. BTW, if this is sooted better for the orca list please let me know/. Thanks again all. Matthew

6 9

[arch-general] NFS server question
by Genes Lists 13 Sep '19

13 Sep '19

All: For client tracking and recovery on reboots NFS provides some mechanisms. My understanding is that nfsdcld is considered replaced by nfsdcltrack. However, while there is a system service unit for nfsdcld there is nothing for nfsdcltrack. The binary for both is available. Only the systemd service file is missing. Further nfs-server service file hardcodes nfsdcld with no option to use nfsdcltrack instead. What is the modern preferred way for the server to do client tracking? Thanks, gene

1 1

[arch-general] Copy remote command server to clipboard
by Maykel Franco 11 Sep '19

11 Sep '19

Hi, I like copy command return server in my clipboard with xclip. Is possible? For example: ssh 192.168.0.3 # pwd /home/archlniux (I like copy the command return to my clipboard archlinux desktop client) Thanks in advanced.

4 6

[arch-general] Tool monitoring activity users Openvpn in Archlinux
by Maykel Franco 11 Sep '19

11 Sep '19

Hi guys, is there any way to detect the activity of users connected by the VPN with openvpn in archlinux? the idea is to know if they are working or not from at home in vpn? Any ideas?

2 1

[arch-general] Input, Uinput, and udev problems with user access
by Storm Dragon 09 Sep '19

09 Sep '19

Howdy, Up until yesterday evening, the following setup would allow the Fenrir screen reader to access the tools it needs to read without root access in terminal emulators like Xterm: groupadd --system input groupadd --system uinput echo 'KERNEL==\"event*\", NAME=\"input/%k\", MODE=\"660\", GROUP=\"input\"' >> /etc/udev/rules.d/99-input.rules echo 'KERNEL==\"uinput\", SUBSYSTEM==\"misc\", OPTIONS+=\"static_node=uinput\", TAG+=\"uaccess\", GROUP=\"uinput\"' >> /etc/udev/rules.d/99-fenrirscreenreader.rules Now, however, while it can still read the screen, the keyboard does nothing. Has something changed, and if so, what do I need to do differently to get it working again? Thanks, Storm --

3 4

[arch-general] [ Pacman -Syu ] Creating temporary files..., error: command failed to execute correctly
by Xianwen Chen (陈贤文) 09 Sep '19

09 Sep '19

Dear list, When I upgrade the packages, from time to time I receive this error information: __Creating temporary files...,__ __error: command failed to execute correctly__ I checked on-line and it seems that I shall look for more error information in the log files. But I don't know where to start. Could you point me to the log files that I shall look into? Thank you. Yours sincerely, Xianwen PS: Below is the entire message from pacman / yaourt. :: Processing package changes... ( 1/20) installing python-html2text [########################################################################################################################] 100% ( 2/20) upgrading bookworm [########################################################################################################################] 100% ( 3/20) upgrading qpdf [########################################################################################################################] 100% ( 4/20) upgrading cups-filters [########################################################################################################################] 100% ( 5/20) upgrading foomatic-db [########################################################################################################################] 100% ( 6/20) upgrading foomatic-db-nonfree [########################################################################################################################] 100% ( 7/20) upgrading fvwm [########################################################################################################################] 100% ( 8/20) upgrading gap [########################################################################################################################] 100% ( 9/20) upgrading libkdegames [########################################################################################################################] 100% (10/20) upgrading kbreakout [########################################################################################################################] 100% (11/20) upgrading libnm [########################################################################################################################] 100% (12/20) upgrading libraw [########################################################################################################################] 100% (13/20) upgrading libreoffice-fresh [########################################################################################################################] 100% (14/20) upgrading libreoffice-fresh-en-gb [########################################################################################################################] 100% (15/20) upgrading libreoffice-fresh-nb [########################################################################################################################] 100% (16/20) upgrading libreoffice-fresh-nn [########################################################################################################################] 100% (17/20) upgrading libwbclient [########################################################################################################################] 100% (18/20) upgrading networkmanager [########################################################################################################################] 100% (19/20) upgrading smbclient [########################################################################################################################] 100% (20/20) upgrading samba [########################################################################################################################] 100% :: Running post-transaction hooks... (1/9) Reloading system bus configuration... (2/9) Compiling GSettings XML schema files... (3/9) Updating icon theme caches... (4/9) Reloading system manager configuration... (5/9) Creating temporary files... error: command failed to execute correctly (6/9) Reloading device manager configuration... (7/9) Arming ConditionNeedsUpdate... (8/9) Updating the desktop file MIME type cache... (9/9) Updating the MIME type database... No database errors have been found!

3 16

[arch-general] Recommend new package : Postfix and MTA-STS (RFC8461)
by Genes Lists 08 Sep '19

08 Sep '19

Topic: Email Suggest: New package for officia repo [2] MTA-STS is taking off and the major email providers are supporting it. Details are described in RFC8461 [1] from Sep 2018. As of now it has support by Google (gmail), yahoo, comcast, hotmail and others. MTA-STS is a new standard that aims to improve the security of SMTP by enabling domain names to opt into strict transport layer security mode that requires authentication (with valid public certificates) and encryption (TLS). There are 2 components to this (a) Sending: Making email server advertise mta-sts (b) Receivng: Postfix needs policy daemon (a) is pretty straightforward to set up, (b) requires a daemon to support the policy for incoming mail. It would be pretty awesome if someone would think about an offocial postfix-mta-sts-resolve package [2]. Postfix can use this daemon - see some discussion on this here [5] where Wietse got involved as well. There is an AUR package but it is quite out of date and I think this would actually be better to be in the official repos if someone was interested in taking it on. Probably as an optional package for postfix This is important for any business use and of course for anyone running their own mail server on Arch. Over time it is likely that any server which does not turn this on at least for sending may find their email being disadvantaged. There are several places where this is discussed in more detail - here's a couple for convenience [3]. Thanks, gene [1] https://tools.ietf.org/html/rfc8461 [2] https://github.com/Snawoot/postfix-mta-sts-resolver [3] https://weekly-geekly.github.io/articles/424961/index.html https://www.hardenize.com/blog/mta-sts https://www.uriports.com/blog/mta-sts-explained/ https://starttls-everywhere.org/ [5] http://postfix.1071664.n5.nabble.com/MTA-STS-when-td95086.html

1 0