- Arch-general - lists.archlinux.org

[arch-general] networkd IPv6 and tunnel problems
by Iru Cai 12 Oct '16

12 Oct '16

Hi, I've an VPS whose network is configered with systemd-networkd. The original interface is eth0 configured by eth0-dhcp.network and has an IPv6 address, which however cannot connect to the HE IPv6 network[1]. So I use tunnel broker to get another IPv6 address. I configured this according to [2]. The new IPv6 address works fine. However, the original IPv6 address doesn't work anymore. When I try to connect to my box using the original IPv6 address, I cannot get a response. Is this related to the ``Tunnel=he-ipv6`` line I wrote to eth0-dhcp.network file? How can I solve this problem so that I can have two IPv6 addresses for different uses? Thanks. Iru [1] https://www.bdwm.net/v2/jump-to.php?url=http%3A%2F%2Fadminhacks.com%2Fbroke… [2] https://wiki.archlinux.org/index.php/IPv6_tunnel_broker_setup#systemd-netwo…

1 0

[arch-general] libvirt and VLAN
by Peter Nabbefeld 11 Oct '16

11 Oct '16

Hello, when trying to create a VLAN interface, I'm getting the following error (english translation below): Fehler beim Anlegen der Netzwerkschnittstelle: 'Schnittstelle konnte nicht definiert werden: internal error: Konnte Interface XML Beschreibung nicht finden: unspecified error - aug_save failed on /etc/sysconfig/network-scripts/ifcfg-wlp6s0.0: mk_augtemp (No such file or directory)' Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/createinterface.py", line 1150, in do_install self.interface.install(meter, create=activate) File "/usr/share/virt-manager/virtinst/interface.py", line 258, in install raise RuntimeError(_("Could not define interface: %s") % str(e)) RuntimeError: Schnittstelle konnte nicht definiert werden: internal error: Konnte Interface XML Beschreibung nicht finden: unspecified error - aug_save failed on /etc/sysconfig/network-scripts/ifcfg-wlp6s0.0: mk_augtemp (No such file or directory) ---- English ---- Error creating network interface: 'Interface could not be defined: internal error: Could not find Interface XML Description: unspecified error - aug_save failed on /etc/sysconfig/network-scripts/ifcfg-wlp6s0.0: mk_augtemp (No such file or directory)' Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/createinterface.py", line 1150, in do_install self.interface.install(meter, create=activate) File "/usr/share/virt-manager/virtinst/interface.py", line 258, in install raise RuntimeError(_("Could not define interface: %s") % str(e)) RuntimeError: Interface could not be defined: internal error: Could not find Interface XML Description: unspecified error - aug_save failed on /etc/sysconfig/network-scripts/ifcfg-wlp6s0.0: mk_augtemp (No such file or directory) ---- End of translation ---- The problem here seems to arise from usage of systemd or networking in Arch, as /etc/sysconfig does not exist and XML cannot be created there. Kind regards Peter

2 1

[arch-general] howto change change yen character to backslash using xkb
by niya levi 11 Oct '16

11 Oct '16

hi everyone i have installed arch with lxde , the keyboard is setup all the keys are setup except one the backslash key, in thunderbird and openoffice a backslash char is displayed but in the lxterminal and geany(ide editor) it displayes as a yen char, i added Option "XKbOptions" "yen:backslash" to /etc/X11/xorg.conf.d/00-keyboard.conf but no change, is the line i added to 00-keyboard.conf incorrect ? i understand that the console is not affected by xorg so i'm also looking for a solution there as well. shadrock thanks

3 2

[arch-general] Cannot receive files via bluetooth
by Peter Nabbefeld 11 Oct '16

11 Oct '16

Hello, it seems some bluetooth has overwritten my bluetooth main.conf, as last change has been on September, 26th. Also, I cannot receive files any more, so I guess, I'd cahnaged sth. there. Unfortunately, I cannot remember, what changes I'd made in the past. :-( Could You probably tell me, what might cause the non-functioning file transfer? Sending files works, btw. Kind regards Peter

4 6

[arch-general] Cups upgrade leaves broken link in multi-user.target.wants: cups.path -> /usr/lib/systemd/system/cups.path
by David C. Rankin 11 Oct '16

11 Oct '16

Devs, I don't know which recent Cups upgrade changed the systemd service name for 'cups.path' to 'org.cups.cupsd.path' without removing the old link when the new package upgrade is performed. This leaves multi-user.target.wants with a broken link, e.g.: $ l1 /etc/systemd/system/multi-user.target.wants/ avahi-daemon.service cronie.service cups.path <--- old link --- dhcpd4.service dovecot.service httpd.service iptables.service lm_sensors.service mysqld.service named.service 'netctl@rlf_network\x2dstatic.service' nmbd.service ntpd.service nut-server.service org.cups.cupsd.path <--- new link --- postfix.service remote-fs.target smbd.service spamassassin.service sshd.service vsftpd.service Do I just need to unlink the old broken link? Is this worth any other report? Forum? Let me know -- David C. Rankin, J.D.,P.E.

2 2

[arch-general] Supermicro cd/dvd inst error: ARCH_201603 device did not show up after 30 seconds
by David C. Rankin 11 Oct '16

11 Oct '16

All, First let me explain I have search through the forums, StackExchange site (SuperUser & Linux Unix StackExhange) and read the problems with similar title, 90% of which were USB install and related to failure to have the proper iso name (e.g ARCH_201603) as the image name, the other 10% were related to /dev/disk/by-label not being created and suggest the creation of the directory and symlink of the install device (e.g. /dev/sr0 to /dev/disk/by-label/ARCH_201603) and exiting the maintenance shell to have the install pickup and continue. Neither of these are a solution. I have one Supermicro server (similar but slightly older) where the install went without issue (H8QM8-2 w/4 Opteron 8360SE). This server is the H8DME-2-LS006 Rev 1.10 w/2 Opteron 8382 processors. (specs: http://www.supermicro.com/Aplus/motherboard/Opteron2000/MCP55/H8DME-2.cfm) Initially, the boot would hang during pci activation with the line pci 000:00:1a.0: [1a:1e:1100] type -- class 0x060000 I reset the bios to the failsafe defaults, still no joy. The Hardware Detection Tool showed a 3Leaf Systems, Inc.|unknown device at that address, the details of which were: Vendor : 3Leaf Systems, Inc. Product : unknown Class : Host bridge Location : 00:1a.0 PCI ID : 1a1e:1100[0000:0000] Latency : 0 Module : unknown Looking though all the bios options, trying one at a time, I found an option for something related to AQUA (? This board an AQUA were apparently the brainchild of 3Leaf, Inc. now out of business http://www.eetimes.com/document.asp?doc_id=1172150 which allowed you to link 32 Opteron processors into a single server) So disabling AQUA completely in the bios allowed the box to boot normally all the way though: :: running hook [archiso_pxe_nfs] :: Mounting '/dev/disk/by-label/ARCH_201603' to '/run/archiso/bootmnt' Waiting 30 seconds for devices.... then the error and I'm dropped to the maintenance shell (e.g. [rootfs /]# ). I've tried the solutions shown at the beginning but I still can't proceed with the remainder of the install. When I create the /dev/disk/by-label directory, create the symlink, and exit the maintenance shell, I get the following error: Buffer I/O error on dev sr0 logical block 0, async page read sr 6:0:1:0 [sr0] tag#0 UNKNOWN(0x2003) Result:hostbyte-0x00 driverbyte=0x08 sr 6:0:1:0 [sr0] tag#0 Sense Key : 0x4 [current] sr 6:0:1:0 [sr0] tag#0 ASC=0x8 ASCQ=0x3 sr 6:0:1:0 [sr0] tag#0 CDB: opcode: 0x28 28 00 00 00 00 00 00 00 02 00 blk_update_request: I/O error, dev sr0, sector 0 isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16 So I need help from the smart folks here. I'm not entirely sure what this error is telling me other than there is some UNKNOWN result that prevents the archiso mount. With this AQUA setting completely disabled in the bios, I don't know if this error is related to that setting, but I suspect it is. What could I try to get past this error? Is there some kernel parameter I coud try to pass at boot that might help? Has anyone else seen this or found another solution? Thanks for any advise you can give.. -- David C. Rankin, J.D.,P.E.

4 9

Re: [arch-general] kmail and qt5-webengine latest : no mail contentesyukuk
by Caio Prado 10 Oct '16

10 Oct '16

Beleza k -- Caio A. G. Prado URBANA LEGIO OMNIA VINCIT “The ships hung in the sky in much the same way that bricks don’t.” (Douglas Adams) On Oct 10, 2016 5:47 AM, "SET" <nmset(a)netcourrier.com> wrote: > Hello, > > Since today's update installing qt5-webengine-5.7.0-4-x86_64.pkg.tar.xz, > no > mail content can be viewed in kmail. Reverting to 5.7.0-3 restores normal > functioning. A long list of errors is output in console : > > ... > #32 0x7fe45aa61df9 <unknown> > #33 0x7fe459eec2f4 QtWebEngine::processMain() > #34 0x0000004006d3 <unknown> > #35 0x7fe458e20291 __libc_start_main > #36 0x00000040072a <unknown> > ... > > Upstream or Arch related, I just want to signal it. >

1 0

[arch-general] kmail and qt5-webengine latest : no mail content
by SET 10 Oct '16

10 Oct '16

Hello, Since today's update installing qt5-webengine-5.7.0-4-x86_64.pkg.tar.xz, no mail content can be viewed in kmail. Reverting to 5.7.0-3 restores normal functioning. A long list of errors is output in console : ... #32 0x7fe45aa61df9 <unknown> #33 0x7fe459eec2f4 QtWebEngine::processMain() #34 0x0000004006d3 <unknown> #35 0x7fe458e20291 __libc_start_main #36 0x00000040072a <unknown> ... Upstream or Arch related, I just want to signal it.

2 1

[arch-general] How to set up a virtual network / NAT for libvirt?
by Peter Nabbefeld 09 Oct '16

09 Oct '16

Hello, I've been told that I cannot bridge multiple networks using WLAN (as WDS would not have been implemented correctly on all devices), but I've to use a virtual network, brobably with NAT, but I cannot find sufficient advice, neither in the arch wiki nor on the internet - probably just my search terms are incorrect, I don't know. Could You give me advice, what I've to do to get internet access on my QEMU/Windows VM? Default networking does'nt work. Kind regards Peter

2 1

Re: [arch-general] Cannot receive files via bluetooth
by Peter Nabbefeld 09 Oct '16

09 Oct '16

Hello, changes are: -rw-r--r-- 1 root root 514464 26. Sep 17:30 bluez-5.42-1-x86_64.pkg.tar.xz -rw-r--r-- 1 root root 76128 26. Sep 17:30 bluez-libs-5.42-1-x86_64.pkg.tar.xz -rw-r--r-- 1 root root 1007296 26. Sep 17:30 bluez-utils-5.42-1-x86_64.pkg.tar.xz However, I'm not a bluetooth expert, so I cannot do much other than trying out some minor changes without any advice. Kind regards Peter

1 0