September 2009 - Arch-general - lists.archlinux.org

[arch-general] musepack-tools version in community
by JM 23 Sep '09

23 Sep '09

Hello, Asunder (in [Community]) has an optional dependency on musepack-tools SV8 (not actually included in the PKGBUILD). Musepack-tools in [Community] is version SV7 while the current stable (SV8) has been available since March. Trying to make a pkgbuild I noticed that it depends on two libraries (libcuefile and libreplaygain) which are obtainable only through musepack's svn. Is this the reason why there is only the previous version in the repos? Regards, JM

1 0

[arch-general] easily comparing (AUR) pkgbuilds against ABS
by Dieter Plaetinck 23 Sep '09

23 Sep '09

It would be nice if it was easily possible to compare a pkgbuild against a corresponding 'official' pkgbuild (from ABS). disclaimer: i haven't thought this through so here are some ideas. consider this a brainstorm - on AUR, many packages are customized versions (patches, vcs versions, alternative compile options,..) of official packages so maybe AUR packagers could fill in an official packagename as 'base' package. the webinterface could then show a diff against the official pkgbuild - maybe this can be done on the makepkg level by passing some flag. it would be less point and click but would work for non-aur pkgbuilds. - everything in 1 big git repo: official packages, community, AUR,.. through branching they can be nicely separated but it would make things easier to generate diffs. dieter

1 0

[arch-general] Amarok 2.2rc1
by Frederic Bezies 23 Sep '09

23 Sep '09

Amarok 2.2 rc1 was released today. It needs taglib 1.6 with asf support. I tried to build taglib 1.6, using this patch to add ASF support : --- CMakeLists.txt 2009-09-08 10:52:57.000000000 +0200 +++ CMakeLists2.txt 2009-09-23 18:43:12.767847589 +0200 @@ -8,8 +8,8 @@ OPTION(BUILD_EXAMPLES "Build the examples" OFF) OPTION(NO_ITUNES_HACKS "Disable workarounds for iTunes bugs" OFF) -OPTION(WITH_ASF "Enable ASF tag reading/writing code" OFF) -OPTION(WITH_MP4 "Enable MP4 tag reading/writing code" OFF) +OPTION(WITH_ASF "Enable ASF tag reading/writing code" ON) +OPTION(WITH_MP4 "Enable MP4 tag reading/writing code" ON) add_definitions(-DHAVE_CONFIG_H) After building an ASF enabled taglib 1.6 and installing it, Amarok is still not being built : Début de la compilation... mkdir: ne peut créer le répertoire `build': Le fichier existe -- Taglib found: -L/usr/lib -ltag CMake Error at CMakeLists.txt:27 (message): TagLib does not have ASF support compiled in. What to do to get Amarok 2.2 rc1 and of course 2.2 final on archlinux ? -- Frederic Bezies fredbezies(a)gmail.com

2 3

Re: [arch-general] vim 7.2.245-1
by Aaron Griffin 23 Sep '09

23 Sep '09

On Wed, Sep 23, 2009 at 12:02 PM, Jozsef <jozefk(a)gmx.com> wrote: > On Wed, 23 Sep 2009, Aaron Griffin wrote: > >> On Wed, Sep 23, 2009 at 2:13 AM, Xavier <shiningxc(a)gmail.com> wrote: >> > On Wed, Sep 23, 2009 at 6:03 AM, Jozsef <jozefk(a)gmx.com> wrote: >> >>> Which plugins in particular are you talking about? Can we get an "ls >> >>> -l ~/.vim/plugin" ? >> >> >> >> To move .vimrc away? but all my settings are in .vimrc :) how do you imagine anything to work without .vimrc? >> >> I don't have vi and gvim anymore. only vim and .vimrc >> >> >> >> >> > >> > Dude, it is just for testing purpose ... >> >> Aye, it's for the purpose of testing. My suspicion is that something >> in your ~/.vimrc is causing this problem, as it works fine for >> everyone else. >> >> >> total 348 >> >> -rw-r--r-- 1 jozefk jozefk 40775 2009-07-02 20:46 calendar.vim >> >> -rw------- 1 jozefk jozefk 15940 2006-10-30 21:23 cecutil.vim >> >> -rw------- 1 jozefk jozefk 62195 2006-10-31 00:17 engspchk.vim >> >> -rwxr--r-- 1 jozefk jozefk 30714 2008-01-25 10:04 matchit.vim >> >> -rw-r--r-- 1 jozefk jozefk 147930 2007-09-21 18:11 taglist.vim >> >> -rw-r--r-- 1 jozefk jozefk 1583 2009-06-25 13:49 templates.vim >> >> -rw-r--r-- 1 jozefk jozefk 36771 2009-07-02 21:11 vimcommander.vim >> >> >> >> and my .vimrc is important as well: http://dpaste.com/97063/ >> >> >> >> >> > >> > Is that ~/.vim/ or ~/.vim/plugins ? >> >> Note that it's "plugin", singular, for the vim plugins dir. I know, it >> annoys me too :) > > I tried to remove .vimrc and the plugins still don't work. The colors became different than when I use my original .vimrc > Which .vimrc is in use right now? That nobody can knows anymore :) So many runtimepaths and directories... > > ls -l ~/.vim/plugin > total 348 > -rw-r--r-- 1 jozefk jozefk 40775 2009-07-02 20:46 calendar.vim > -rw------- 1 jozefk jozefk 15940 2006-10-30 21:23 cecutil.vim > -rw------- 1 jozefk jozefk 62195 2006-10-31 00:17 engspchk.vim > -rwxr--r-- 1 jozefk jozefk 30714 2008-01-25 10:04 matchit.vim > -rw-r--r-- 1 jozefk jozefk 147930 2007-09-21 18:11 taglist.vim > -rw-r--r-- 1 jozefk jozefk 1583 2009-06-25 13:49 templates.vim > -rw-r--r-- 1 jozefk jozefk 36771 2009-07-02 21:11 vimcommander.vim > > ls -l ~/.vim/ > total 2032 > drwxr-xr-x 2 jozefk jozefk 4096 2009-07-15 21:25 CVIMSYN > drwxr-xr-x 2 jozefk jozefk 4096 2009-07-15 21:25 doc > -rw-r--r-- 1 jozefk jozefk 2048000 2009-07-15 21:24 engspchk.tar > drwxr-xr-x 2 jozefk jozefk 4096 2009-07-15 21:25 plugin > -rw-r--r-- 1 jozefk jozefk 74 2009-06-17 22:12 skeleton.css > -rw-r--r-- 1 jozefk jozefk 445 2009-06-17 21:57 skeleton.html > -rw-r--r-- 1 jozefk jozefk 1300 2009-06-17 21:56 skeleton.php > drwxr-xr-x 2 jozefk jozefk 4096 2009-07-13 19:08 templates > > It doesn't works fine for everyone else. Somebody already mentioned that he has the same issue and I didn't change anything with my .vimrc or with any other file or directory or plugin. All I did was > pacman -R vim vi gvim > And after that pacman -S vim > Nothing else. I already paste my .vimrc in last message so if you think something is wrong with it, please let me know :) Here's a question for you... are you using "vi" or "vim"?

3 3

Re: [arch-general] vim 7.2.245-1
by Xavier 23 Sep '09

23 Sep '09

On Wed, Sep 23, 2009 at 6:03 AM, Jozsef <jozefk(a)gmx.com> wrote: >> Which plugins in particular are you talking about? Can we get an "ls >> -l ~/.vim/plugin" ? > > To move .vimrc away? but all my settings are in .vimrc :) how do you imagine anything to work without .vimrc? > I don't have vi and gvim anymore. only vim and .vimrc > > Dude, it is just for testing purpose ... > total 348 > -rw-r--r-- 1 jozefk jozefk 40775 2009-07-02 20:46 calendar.vim > -rw------- 1 jozefk jozefk 15940 2006-10-30 21:23 cecutil.vim > -rw------- 1 jozefk jozefk 62195 2006-10-31 00:17 engspchk.vim > -rwxr--r-- 1 jozefk jozefk 30714 2008-01-25 10:04 matchit.vim > -rw-r--r-- 1 jozefk jozefk 147930 2007-09-21 18:11 taglist.vim > -rw-r--r-- 1 jozefk jozefk 1583 2009-06-25 13:49 templates.vim > -rw-r--r-- 1 jozefk jozefk 36771 2009-07-02 21:11 vimcommander.vim > > and my .vimrc is important as well: http://dpaste.com/97063/ > > Is that ~/.vim/ or ~/.vim/plugins ?

3 2

[arch-general] [PATCH 0/3] Three smelly patches for commitpkg
by Evangelos Foutras 23 Sep '09

23 Sep '09

First two patches are somewhat trivial. The third one adds support for uploading packages to multiple architectures. Let me explain the rationale behind the last patch. My workflow goes something like this: 1) sudo makechrootpkg -c -r /opt/arch/stable-i686 2) sudo makechrootpkg -c -r /opt/arch/stable-x86_64 3) scp *pkg* aur.archlinux.org:staging/community 4) source PKGBUILD; svn commit -m "$pkgname $pkgver-$pkgrel random message" 5) archrelease community-i686 6) archrelease community-x86_64 7) ssh aur.archlinux.org /arch/db-community As you can see, I'm doing all steps manually (which is time-consuming and prone to errors). Unless I'm missing an existing way to upload packages to both architectures using commitpkg (via its communitypkg symlink), the third patch can help automate steps 3-6 above. I uploaded one package (that needed updating) using the modified commitpkg and it worked as expected. However, more testing is needed, especially with split packages. Please let me know what you think. :)

1 3

[arch-general] Fwd: Re: vim 7.2.245-1
by Jozsef 23 Sep '09

23 Sep '09

> ----- Original Message ----- > > From: Aaron Griffin > > Sent: 09/22/09 07:10 pm > > To: General Discusson about Arch Linux > > Subject: Re: [arch-general] vim 7.2.245-1 > > > On Mon, Sep 21, 2009 at 10:32 PM, Jozsef wrote: > >> I never used runtimepath before and everything worked fine. > You shouldn't have to. It is set by default by vim. In a running vim > instance do > :echo &runtimepath > >> And I don't have a "after" directory in /usr/share/vim/vimfiles/ > at the moment. Is it something I should create by myself? > It doesn't need to exist. And it's certainly useless if empty. Only > create it if you need it. > > And all of that directories inside of /usr/share/vim/ are owned by > root. It could be a reason why the plugins don't work if I copy them > to vimfiles/plugins or vimfiles/after > > I'm not running vim as root, why should I do that? > Owned by root does not mean that you can't READ the files. Vim > doesn't > need to do anything except read them, and it can. > I guess I'm confused as to where you installed your plugins. It's > typically best to install them in ~/.vim/ rather than system wide > > > If the Vim 7.2.245-1 will work the same as my previous version, in case > if I create that "after" directory and copy everything from ~/.vim into > it, I would be happy to do it. In that case everything should work > without setting runtimepath in ~/.vimrc > > But I'm not sure that's the case. Will try and let you know. > > I installed all my plugins in ~/.vim directory. But as I said earlier, > non of my plugins worked with Vim 7.2.245-1 before I added "set > runtimepath..." in ~/.vimrc > > That's why I tried first to copy my plugins in /usr/share/vim and > /usr/share/vim/vimfiles and other places. But nothing helped. I didn't > knew about "after" directory, that's why I haven't tried that yet. > ----- End forwarded message ----- PS: sometimes if I'm using webmail, my emails are blank :P -- Best, Jozsef Kurucity | Web & Graphic Designer +971 50 6783113 | jozefk(a)gmx.com

2 2

Re: [arch-general] Looking for czech and simplified chinese speakers for a quick pacman translation update
by Xavier 23 Sep '09

23 Sep '09

2009/9/22 vojtech.gondzala <vojtech.gondzala(a)gmail.com>: > Dne Tue, 22 Sep 2009 17:53:32 +0200 Xavier <shiningxc(a)gmail.com> napsal(a): > >> Hello, >> >> we are just lacking a quick update for two languages (czech and >> simplified chinese), and it's just 13 messages, so maybe someone here >> could help ? >> >> The po files are there : >> http://code.toofishes.net/pacman/po_files/pacman/ >> http://code.toofishes.net/pacman/po_files/libalpm/ > > Hi, > > I realy sorry, but I'm very busy now and I'm out of my home computer with > Linux. I can fix translate for next release... > No problem, Ondřej Kučera took care of it :) Not sure what we will do about simplified chinese though. There is apparently not many Chinese users since no one replied.

3 4

Re: [arch-general] vim 7.2.245-1
by Aaron Griffin 23 Sep '09

23 Sep '09

On Tue, Sep 22, 2009 at 1:51 PM, Jozsef <jozefk(a)gmx.com> wrote: > On Tue, 22 Sep 2009, Xavier wrote: > >> On Tue, Sep 22, 2009 at 6:10 PM, Aaron Griffin <aaronmgriffin(a)gmail.com> wrote: >> > On Mon, Sep 21, 2009 at 10:32 PM, Jozsef <jozefk(a)gmx.com> wrote: >> >>> I never used runtimepath before and everything worked fine. >> > >> > You shouldn't have to. It is set by default by vim. In a running vim instance do >> > :echo &runtimepath >> > >> >> To Jozsef : >> please remove your custom runtimepath from vimrc, and paste the output >> of the above command. >> >> You should keep your plugins in ~/.vim/ , and figure out why they are >> not found there. > > Here is the output: /home/jozefk/.vim,/usr/share/vim/vimfiles,/usr/share/vim/vim72/,/usr/share/vim/vimfiles/after,/home/jozefk/.vim/after > > And why the plugins don't work I can not tell you because I'm not moving them around. If I put runtimepath in .vimrc they work, if I remove it they don't work. So the problem is not with plugins and > it's not with runtimepath. I don't know what else is different in this verison of vim. I'm not a programer and developer of vim. I'm just using it everyday. Even this email I'm typing in vim (without > plugins since I comment out runtimepath :) Um are you actually installing your plugins to ~/.vim/plugin? The runtime path above (the default) clearly includes the same directories that your manual runtimepath setting has... I don't know what you're doing, but you have some major config issues. Please mv your vimrc/gvimrc files away so that no extraneous config files are executed and try again. Which plugins in particular are you talking about? Can we get an "ls -l ~/.vim/plugin" ?

2 1

[arch-general] New kernel/updates - Is the timezone information messed up for dual-boot configs?
by David C. Rankin 22 Sep '09

22 Sep '09

Listmates, I have been chasing my tail on the madwifi issue and I think I have found the problem. It's not madwifi at all, it's the timezone handling. My box is dual-boot, Arch - Vista. Accordingly, the hardware clock is set to localtime: LOCALE="en_US.utf8" HARDWARECLOCK="local" USEDIRECTISA="no" TIMEZONE="America/Chicago" KEYMAP="us" However, I have been dumped into the recovery console each time I have booted for the past day or so. I wasn't alarmed at first because I have several hard drives for the box and I switch back and forth. One drive just contains linux so the hwclock is set to UTC for that setup and then set two localtime for the two other dual-boot drives. So when I reinstall a drive, it isn't uncommon to need to reset the clock and run fsck to get the hwclock and system happy for the new config. While trouble-shooting the madwifi issue, I booted again this morning and was again dumped into the recovery console to run fsck again. Looking at the clock, something had set the clock backwards 5 hours. (American/Chicago -6, +1 for daylight savings = -5 tz offset). This should not have happened. I know this is related to something in a recent update. The pacman log is here: http://www.3111skyline.com/download/Archlinux/config/wireless/pacman.log.bz2 I noticed this morning that another tzdata update: tzdata-2009m-1-x86_64.pkg.tar.gz But this did fix the problem. It seems no matter what I do, each time I boot, the time gets adjusted backwards by the zoneinfo offset. I have set/confirmed the hardware and sys clocks: [13:05 alchemy:/home/david] # date Tue Sep 22 13:09:56 CDT 2009 [13:09 alchemy:/home/david] # date -u Tue Sep 22 18:09:59 UTC 2009 [13:09 alchemy:/home/david] # hwclock -r Tue 22 Sep 2009 01:10:06 PM CDT -1.000347 seconds and I have set hwclock --localtime and confirmed the same time setting with --systohc, but still, each time I boot, the time is 5 hours in the past. I have confirmed /etc/localtime is in fact the same as /usr/share/zoneinfo/America/Chicago: [13:10 alchemy:/home/david] # diff /etc/localtime /usr/share/zoneinfo/America/Chicago So, I'm stumped. I certainly haven't changed any of the Arch settings for timezone handling since I installed arch in what -- March/April? So why all of a sudden is Arch subtracting 5 hours from my hwclock on either shutdown or boot? I know the checks are done in /etc/rc.sysinit and /etc/rc.shutdown, but what could have changed to make Arch want to treat the box as if the time were set to UTC? What else to check? Any help would be greatly appreciated. (this time I have made an effor to post everything possibly relevant, so if I have missed something you would like to see, just ask, no need to yell) -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com

5 6