December 2011 - Arch-general - lists.archlinux.org

[arch-general] netcfg pppoe 'error sending pppoe packet: Network is down'
by Ralf Mardorf 12 Dec '11

12 Dec '11

Hi :) if I run (as root, there anyway still is no user) 'netcfg pppoe' I get 'error sending/receiving pppoe packet: Network is down'. I never set up a wired pppoe connection manually before. Cheers! Ralf PS: I've seen that there are 2 entries to edit and one might or might not be a typo. Perhaps I'm missing much more ;). # # /etc/rc.conf - Main Configuration for Arch Linux # # ----------------------------------------------------------------------- # LOCALIZATION # ----------------------------------------------------------------------- # # [snip] LOCALE="en_US.UTF-8" DAEMON_LOCALE="no" HARDWARECLOCK="localtime" TIMEZONE="Europe/Berlin" KEYMAP="de-latin1" CONSOLEFONT= CONSOLEMAP= USECOLOR="yes" # ----------------------------------------------------------------------- # HARDWARE # ----------------------------------------------------------------------- # # [snip] MODULES=() # Udev settle timeout (default to 30) UDEV_TIMEOUT=30 # Scan for FakeRAID (dmraid) Volumes at startup USEDMRAID="no" # Scan for BTRFS volumes at startup USEBTRFS="no" # Scan for LVM volume groups at startup, required if you use LVM USELVM="no" # ----------------------------------------------------------------------- # NETWORKING # ----------------------------------------------------------------------- # # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts # HOSTNAME="archlinux" # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces. # # [snip] #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255" #eth0="dhcp" #INTERFACES=(eth0) # Setting this to "yes" will skip network shutdown. # This is required if your root device is on NFS. NETWORK_PERSIST="no" # Enable these netcfg profiles at boot-up. [snip] NETWORKS=pppoe # ----------------------------------------------------------------------- # DAEMONS # ----------------------------------------------------------------------- # [snip] DAEMONS=(hwclock syslog-ng !network !netfs crond) root@PartedMagic:/media/sda9# cat etc/network.d/pppoe CONNECTION='ppp' INTERFACE=eth0 PEER='provider' PPP_TIMEOUT=10 root@PartedMagic:/media/sda9# cat etc/hosts # # /etc/hosts: static lookup table for host names # #<ip-address> <hostname.domain.org> <hostname> 127.0.0.1 localhost.localdomain localhost archlinux ::1 localhost.localdomain localhost # End of file root@PartedMagic:/media/sda9# cat etc/ppp/peers/alice # /etc/ppp/peers/your_provider plugin rp-pppoe.so # rp_pppoe_ac 'your ac name' # rp_pppoe_service 'your service name' # network interface eth0 # login name name "[snip]" usepeerdns persist # Uncomment this if you want to enable dial on demand #demand #idle 180 defaultroute hide-password noauth root@PartedMagic:/media/sda9# ls etc/ppp/peers -hAl total 4 -rw-r--r-- 1 root root 303 Dec 8 08:01 alice lrwxrwxrwx 1 root root 5 Dec 8 08:11 provider -> alice root@PartedMagic:/media/sda9# cat etc/ppp/pap-secrets # Secrets for authentication using PAP # client server secret IP addresses "[snip]" * "[snip]" root@PartedMagic:/media/sda9# cat etc/ppp/pppoe.conf # [snip] # Ethernet card connected to DSL modem ETH='sth0' ### ??? TYPO #### # PPPoE user name. [snip] USER='[snip]' # Bring link up on demand? [snip] DEMAND=no #DEMAND=300 # [snip] DNSTYPE=SERVER # [snip] PEERDNS=yes DNS1= DNS2= # Make the PPPoE connection your default route. [snip] DEFAULTROUTE=yes ### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT # [snip] # If you are using rp-pppoe on a physically-inaccessible host, set # CONNECT_TIMEOUT to 0. This makes SURE that the machine keeps trying # to connect forever after pppoe-start is called. Otherwise, it will # give out after CONNECT_TIMEOUT seconds and will not attempt to # connect again, making it impossible to reach. CONNECT_TIMEOUT=30 ### TODO ### # How often in seconds pppoe-start polls to check if link is up CONNECT_POLL=2 # Specific desired AC Name ACNAME= # Specific desired service name SERVICENAME= # Character to echo at each poll. Use PING="" if you don't want # anything echoed PING="." # File where the pppoe-connect script writes its process-ID. # Three files are actually used: # $PIDFILE contains PID of pppoe-connect script # $PIDFILE.pppoe contains PID of pppoe process # $PIDFILE.pppd contains PID of pppd process CF_BASE=`basename $CONFIG` PIDFILE="/var/run/$CF_BASE-pppoe.pid" # Do you want to use synchronous PPP? "yes" or "no". "yes" is much # easier on CPU usage, but may not work for you. It is safer to use # "no", but you may want to experiment with "yes". "yes" is generally # safe on Linux machines with the n_hdlc line discipline; unsafe on others. SYNCHRONOUS=no # Do you want to clamp the MSS? Here's how to decide: # - If you have only a SINGLE computer connected to the DSL modem, choose # "no". # - If you have a computer acting as a gateway for a LAN, choose "1412". # The setting of 1412 is safe for either setup, but uses slightly more # CPU power. CLAMPMSS=1412 ### TODO ### #CLAMPMSS=no ### TODO ### # LCP echo interval and failure count. LCP_INTERVAL=20 LCP_FAILURE=3 # PPPOE_TIMEOUT should be about 4*LCP_INTERVAL PPPOE_TIMEOUT=80 # Firewalling: One of NONE, STANDALONE or MASQUERADE FIREWALL=STANDALONE # Linux kernel-mode plugin for pppd. If you want to try the kernel-mode # plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so LINUX_PLUGIN= # Any extra arguments to pass to pppoe. Normally, use a blank string # like this: PPPOE_EXTRA="" # Rumour has it that "Citizen's Communications" with a 3Com # HomeConnect DSL Modem DualLink requires these extra options: # PPPOE_EXTRA="-f 3c12:3c13 -S ISP" # Any extra arguments to pass to pppd. Normally, use a blank string # like this: PPPD_EXTRA="" ########## DON'T CHANGE BELOW UNLESS YOU KNOW WHAT YOU ARE DOING # If you wish to COMPLETELY overrride the pppd invocation: # Example: # OVERRIDE_PPPD_COMMAND="pppd call dsl" # If you want pppoe-connect to exit when connection drops: # RETRY_ON_FAILURE=no

6 13

Re: [arch-general] audio realtime, was: /usr/bin/X: No such file
by Ralf Madorf 12 Dec '11

12 Dec '11

Thank you Bernardo. Thank you Ray. Ray, a note to your comment about HPET/hrtimer, for jackd IMO it's unusable, since at least my machine doesnt have enough timers. I'm using it for the ALSA sequencer timer only. Some apps freeze the system, when it's enabled. Fortunately non of those I'm using. Regarding to MIDI jitter with hardware interfaces it can improve a little bit. Cheers! Ralf

1 0

[arch-general] Top level node not shown in Texinfo viewer
by Ricardo Catalinas Jiménez 12 Dec '11

12 Dec '11

Using the Texinfo standalone viewer, I found out that the top level node is not shown with the command `info' as it should. In Ubuntu seems to work fine with Texinfo 4.13, but here in Arch I don't know if it is really a bug or what :-/ Anyone can see this top level node just executing `info'? Thanks in advance. -- Ricardo (http://r.untroubled.be/)

15 34

[arch-general] audio realtime, was: /usr/bin/X: No such file
by Ralf Mardorf 11 Dec '11

11 Dec '11

Sorry some additional Arch Linux newbie questions ;) -----Ursprüngliche Nachricht----- Von: arch-general-bounces(a)archlinux.org im Auftrag von Ionut Biru Gesendet: So 12/11/2011 16:19 > AUR is your friend. > > nvidia-lts for kernel26-lts is in extra. > nvidia-rt from aur > nvidia-$yourcrappykerly from aur http://aur.archlinux.org/packages.php?ID=12132 Dependencies: linux-rt>=3.0.0 linux-rt<3.2.0 nvidia-utils=285.05.09 So if I build a kernel myself, not by using pacman or PKGBUILD I need to add some kind of dummy package? I'll test one of those kernels from https://wiki.archlinux.org/index.php/Pro_Audio#Realtime_Kernel but usually I'm using my self build kernels only. Btw. I can't agree with "Tickless, CONFIG_NO_HZ, i.e "dynticks", or "dynamic ticks", is said to interfere with realtime (though the extent may not be noticeable)." it reduces audible MIDI jitter on my machine. Dunno how PKGBUILD works (I'll find out soon), but reading https://aur.archlinux.org/packages/li/linux-rt/PKGBUILD I can e.g. use make oldconfig, but "# remove the sublevel from Makefile # this ensures our kernel version is always 3.X-ARCH # this way, minor kernel updates will not break external modules" What if I need e.g. 3.0.12-rt30-test1 and 3.0.12-rt30-test2 with different configs? Is there something equivalent to Debian's equivs? http://www.debian.org/doc/manuals/apt-howto/ch-helpers.en.html E.g. to remove pulseaudio, which was installed as dependency of xfce4, or to install a self build, selected version of jack2 and to keep dependencies. I couldn't find Jack2 64-bit (searching the Internet from a Suse install, didn't run packman)?! Anyway, 32-bit seems to be 1.9.7 and I need 1.9.8, because I need the -Xalsarawmidi option. Using this option in combination with a2jmidi_bridge I don't have any audible MIDI jitter. > grep audio /media/archlinux/etc/security/limits.conf @audio - rtprio 65 @audio - nice -10 @audio - memlock 40000 If I edit this to different values, e.g. http://jackaudio.org/linux_rt_config , could it be overwritten by a package upgrade? Cheers! Ralf

4 7

[arch-general] /usr/bin/X: No such file
by Ralf Mardorf 11 Dec '11

11 Dec '11

Hi :) when I try to start xfce (as root, since I didn't add a user until now) I get "/usr/bin/startxfce4: Starting X server /etc/X11/xinit/xserverrc: line1: /usr/bin/X: No such file or directory" I missed something when reading the Wiki. I'll read it again. Any hints are welcome. Cheers! Ralf PS: ----------------------------------------------------------------- > cat /media/archlinux/etc/gdm/custom.conf [snip] [security] AllowRoot=true [snip] ----------------------------------------------------------------- > grep DAEMONS= /media/archlinux/etc/rc.conf DAEMONS=(hwclock syslog-ng !network !netfs crond acpid dbus) ----------------------------------------------------------------- # cat /media/archlinux/root/.bash_profile # # ~/.bash_profile # [[ -f ~/.bashrc ]] && . ~/.bashrc if [ "$(tty)" = "/dev/tty1" ]; then startxfce4 fi ----------------------------------------------------------------- # grep exec /media/archlinux/root/.xinitrc # exec gnome-session # exec startkde # exec startxfce4 exec ck-launch-session dbus-launch --exit-with-session startxfce4 ----------------------------------------------------------------- # cat /media/archlinux/root/.xsession #!/bin/sh # # ~/.xsession # # Executed by xdm/gdm/kdm at login # /bin/bash --login -i ~/.xinitrc ----------------------------------------------------------------- # cat /media/archlinux/root/.xprofile # [snip, it's empty] # Executed by gdm at login # ----------------------------------------------------------------- # ls /media/archlinux/root -hAl total 32K -rw------- 1 root root 2.7K 2011-12-11 10:45 .bash_history -rw-r--r-- 1 root root 21 2011-12-11 06:17 .bash_logout -rw-r--r-- 1 root root 111 2011-12-11 06:25 .bash_profile -rw-r--r-- 1 root root 141 2011-12-11 06:18 .bashrc drwx------ 2 root root 4.0K 2011-12-11 10:10 .w3m -rw-r--r-- 1 root root 379 2011-12-11 06:29 .xinitrc -rw-r--r-- 1 root root 57 2011-12-11 06:45 .xprofile -rw-r--r-- 1 root root 100 2011-12-11 06:19 .xsession ----------------------------------------------------------------- # ls /media/archlinux/var/log -hAl total 4.2M -rw-r----- 1 root floppy 480 2011-12-11 10:46 acpid.log -rw-r----- 1 root floppy 6.3K 2011-12-11 10:44 auth.log -rw-r--r-- 1 root root 34K 2011-12-11 10:46 boot -rw------- 1 root root 0 2011-12-07 19:59 btmp drwxr-xr-x 2 root root 4.0K 2011-12-10 19:58 ConsoleKit -rw-r----- 1 root floppy 7.0K 2011-12-11 10:46 crond.log -rw-r----- 1 root floppy 47K 2011-12-11 10:46 daemon.log -rw-r--r-- 1 root root 53K 2011-12-11 10:46 dmesg.log -rw-r----- 1 root floppy 56K 2011-12-11 10:46 errors.log -rw-r----- 1 root floppy 1.4M 2011-12-11 10:46 everything.log -rw------- 1 root root 4.5K 2011-12-11 10:44 faillog drwxrwx--T 2 root 120 4.0K 2011-12-11 10:46 gdm -rw-r----- 1 root floppy 1.4M 2011-12-11 10:46 kernel.log -rw-r--r-- 1 root root 126K 2011-12-11 10:44 lastlog -rw-r----- 1 root floppy 880K 2011-12-11 10:46 messages.log drwxr-xr-x 2 root root 4.0K 2011-10-10 01:25 old -rw-r--r-- 1 root root 41K 2011-12-11 10:39 pacman.log -rw-r----- 1 root floppy 3.6K 2011-12-11 10:46 syslog.log -rw-r----- 1 root floppy 1.3K 2011-12-11 10:46 user.log -rw-r--r-- 1 root root 222K 2011-12-11 10:46 wtmp -----------------------------------------------------------------

5 8

[arch-general] Install Arch in stages?
by Grant McDuling 11 Dec '11

11 Dec '11

Hi, I am new to Arch, being a Mint user until now. I have the iso on CD now and ready to install. Can I do this is stages or is it best to do the complete basic install in one sitting? Grant McDuling Writer http://www.amazon.com/Grant-McDuling/e/B004UTH35M

8 16

[arch-general] .bashrc not executed on login
by G. Schlisio 10 Dec '11

10 Dec '11

Hello all, if i execute 'sudo su -' roots .bashrc is obviously not executed, so my aliases are not loaded. file properties are 751 root:root did i miss something important? thanks

5 6

[arch-general] Pacman 4.0.x on core ? When ? :)
by fredbezies 10 Dec '11

10 Dec '11

Hello. I'm using pacman 4.0.x since its release on testing and it is really a great version. Any tips or infos for a date of its release on core repository ? Thanks :) -- Frederic Bezies fredbezies(a)gmail.com

4 5

[arch-general] KDE Debugging
by Nicolás Adamo 10 Dec '11

10 Dec '11

Does anybody know how to make a good bug repport using the inbuilt KDE Bug Tool? It launches whenever a bug occurs, but if I try to complete the bug fill (or report) it says the information is useless... Arch doesn't have a package specific for KDE Debugging, so I wanted to know if anybody makes bug reports and how. BTW, I'm sure the bug is related to KMix, the tray icon for the mixer/sound control. It launches at boot, but for some reason it closes. Then it restarts fine, but the "kdedaemon closed unexpectedly" message window was already launched, waiting for me to fill the bug report (which I can not because of the lack of enough debugging tools) Thanks, Nicolás

3 2

[arch-general] Arch forum and wiki down
by Karol Blazewicz 10 Dec '11

10 Dec '11

I've e-mailed Pierre, Ioni and Florian. Hopefully things will get fixed soon.

2 2