- Arch-general - lists.archlinux.org

[arch-general] After updating mkinitcpio generates a image without modules
by Eduardo Machado 26 Jun '13

26 Jun '13

Hi, after the last grub update (with kernel 3,9,7) when the pacman runs to build the new boot images, pacman output many errors with modules not being found. The log is attached. I tried to chroot from a livecd and tried to reinstall all the packages, tried to downgrade the kernel and nothing reverted the problem. I cannot figured out why the modules are not being found... Anyone can help me with this? Thanks in advance. --- Eduardo M. Machado

1 0

[arch-general] bluetooth
by Genes Lists 26 Jun '13

26 Jun '13

1) Fully updated from testing repo. As of a couple of days ago (around 3.9.7 kernel) I noticed that bluetooth mouse takes a few seconds to initialize - it used to be almost instant. 2) i.e. leave laptop till screen blanks etc. Come back and wiggle mouse - takes a few seconds before cursor wakes up - after that it works totally normally. 3) I am aware of a migration to bluez 5 - do I need to remove bluez4 and replace with bluez5 or is it too soon? i.e. is this user error? I have relied on pacman for updates as I didn't see any notes about manual adjustments. 4) /var/log/errors.log has this: Jun 25 08:30:14 lap3 kernel: [312741.987038] Bluetooth: Wrong link type (-71) Jun 25 08:30:18 lap3 kernel: [312746.011670] hid-generic 0005:1532:0008.0033: unknown main item tag 0x0 /var/log/messages has this (from 1/2 hour earlier) Jun 25 07:53:42 lap3 bluetoothd[461]: bluetoothd[461]: Adapter /org/bluez/461/hci0 has been enabled Jun 25 07:53:42 lap3 bluetoothd[461]: bluetoothd[461]: Unknown command complete for opcode 19 Jun 25 07:53:42 lap3 bluetoothd[461]: Adapter /org/bluez/461/hci0 has been enabled Jun 25 07:53:42 lap3 bluetoothd[461]: Unknown command complete for opcode 19 5) Info: linux 3.9.7-1 kdebase-runtime 4.10.4-1 bluedevil 1.3.1-1 bluez-libs 5.5-3 bluez-utils 5.5-3 protocol stack bluez4 4.101-3 D libbluedevil 1.9.3-2 A

2 3

[arch-general] interference of the recent /usr symlinking with the mkinitcpio 'usr' hook?
by Simon Campese 25 Jun '13

25 Jun '13

Hello, I just did a fresh install of archlinux based off the most recent install cd. I've setup an encrypted root filesystem (btrfs) with separate subvolumes for /, /usr, /var, /home and /etc. All subvolumes are entered with the correct mount options (subvol=...) in /etc/fstab. In particular, the lines for the / and /usr mounts look identical, except for different arguments to the 'subvol' mount option. In my /etc/mkinitcpio.conf, I have the following HOOKS line: HOOKS="base udev autodetect block keymap keyboard encrypt filesystems fsck usr shutdown" At bootup, right after entering my luks password, I get the following error message: "Error: Root device mounted successfully, but /sbin/init does not exist. Bailing out, you are on your own. Good Luck" Checking in the emergency shell, it turns out that the root subvolume has been mounted correctly but usr has not. Interchanging the order of the 'filesystems', 'fsck' and 'usr' hooks (I've tried all six possibilities) doesn't resolve this problem. Could this be related to the recent symlinking of /sbin to /usr/bin? My other explanations would be the 'subvol' mount option or the missing fsck.btrfs tool, but in the latter case the root subvolume shouldn't have been mounted as well. Any ideas? Thanks in advance, Simon

5 5

[arch-general] Apache, systemd-tmpfiles
by João Pires 24 Jun '13

24 Jun '13

Hi, So today I as messing with my Raspberry Pi, and to avoid that the SD card have excessive writing I decided to turn /var/log into a tmpfs mount. After a reboot the httpd service stop running because the /var/log/httpd folder does not exist. So after a while I find the systemd-tmpfiles and the thing is the apache.conf in the /usr/lib/tmpfiles.d only creates the /run/httpd folder, after I add a new line to also create the /var/log/httpd the service start running again. So my question is, can this be considered a bug? should I create a bug report? No trees were harmed in the sending of this message; However, a large number of electrons were terribly inconvenienced. João Pires

2 1

[arch-general] makepkg --noprepare option
by kachelaqa 24 Jun '13

24 Jun '13

For version 4.1.1 of pacman, a --noprepare option was added to makepkg [1]. But, for version 4.1.2, the option is no longer available. I've tried searching for some discussion of why the option was removed, but have drawn a complete blank so far. Can anyone shed any light on this? [1] https://mailman.archlinux.org/pipermail/pacman-dev/2013-April/017094.html

4 4

[arch-general] finding corresponding udev rule for device
by G. Schlisio 21 Jun '13

21 Jun '13

hi all, i want to customize the udev rule, that assigns my garmin gps device with a device name. permissions need to be set different, so users have read/write access. the only problem is, that i dont know, which rule it is i have to customize. is there any way to determine, which standard udev rule applies for which device? thanks for suggestions. georg

4 7

[arch-general] Failed to build mpd from source
by Iru Cai 19 Jun '13

19 Jun '13

src/input/cdio_paranoia_input_plugin.c:38:27: fatal error: cdio/paranoia.h: No such file or directory #include <cdio/paranoia.h> ^ and the result of pacman -Qi libcdio-paranoia is: libcdio-paranoia /usr/include/cdio/paranoia/paranoia.h

3 4

[arch-general] "vi" just terminates on a 32bit machine
by Manuel Reimer 17 Jun '13

17 Jun '13

Hello, if I access one of my systems via "ssh" and try to use "vi" there, then it immediately returns with exit status "1". System is an up-to-date 32bit ArchLinux system. I've attached the strace output of my try to run "vi" to this mail. Can someone see there what could have happened? Reinstalling "vi" didn't fix this for me... Thank you very much in advance Yours Manuel

4 3

[arch-general] Libreoffice Beta builds
by Jelle van der Waa 16 Jun '13

16 Jun '13

If anyone wants to test out the new Libreoffice beta release. Add the folowing to your pacman.conf [libreoffice] Server = http://pkgbuild.com/~jelle/libreoffice SigLevel = Optional pacman -S libreoffice/libreoffice -- Jelle van der Waa

1 0

[arch-general] getting updates for offline computer
by Lieven Moors 14 Jun '13

14 Jun '13

Hi, I'm using the internet connection at home to update a computer without internet. I use a script to get the updates for the offline computer, and to install them on that computer. To get a list of updated packages on the offline computer, I use the command: pacman -Sup --noconfirm Recently the package webkitgtk3 was moved to webkitgtk. But in the process, it also pulls in a new dependency harfbuzz-icu. No when I use the command above against the new sync database, harfbuzz-icu is not present in the list of packages. My question is, whether this would be considered a bug in pacman, or if this would be an expected limitation. Or maybe there is something else I don't understand... Thanks for your help, lieven

3 3

[arch-general] [procps-ng] archlinux default sysctl.conf
by Leonid Isaev 14 Jun '13

14 Jun '13

Hi, After reading sysctl-related manpages in systemd, I started to wonder about the logic behind /etc/sysctl.conf shipped with core/procps-ng. If one follows systemd's conventions, this file should be in /usr/lib/sysctl.d and mnemonically called something like "100-archlinux-default.conf". Also note, that systemd currently doesn't document /etc/sysctl.conf at all... So is there any reason for having an Arch default sysctl.conf in /etc ? Thanks, -- Leonid Isaev GnuPG key: 0x164B5A6D Fingerprint: C0DF 20D0 C075 C3F1 E1BE 775A A7AE F6CB 164B 5A6D

2 2

[arch-general] The Linux Way: Rebuilding The Unix Way for a New Era Webcast by O'Reilly
by Myra Nelson 14 Jun '13

14 Jun '13

To all. If any one is interested this is tomorrow at 10AM PT, San Francisco 6pm - London | 1pm - New York | Sat, Jun 15th at 3am - Sydney | Sat, Jun 15th at 2am - Tokyo | Sat, Jun 15th at 1am - Beijing | 10:30pm - Mumbai http://oreillynet.com/pub/e/2714 The speaker is from Redhat. There is a link for registration and it's free. Myra -- Life's fun when your sick and psychotic!

1 0

[arch-general] Fluxbox lost windows decorator
by Alex Sla 12 Jun '13

12 Jun '13

Hi guys, I currently have some issue with my Fluxbox. After some time running, new WIndows don't own a Windows decorator. This affecting Qt in same way as GTK+ apps. I do run fluxbox 1.3.5-2 Any suggestion? so far 4k3nd0

1 0

[arch-general] Arch, IBus, and Rime: IBus engines are not switched
by Julius Adorf 11 Jun '13

11 Jun '13

Hi, I stumbled over odd behaviour after installing ibus-rime on a rather fresh Arch installation. Switching between my two configured input methods (German, Chinese) works nicely both by keystroke or the menu in the systray of my Gnome Shell. I expected that this will make IBus change to an appropriate engine. However, whenever I switch between the Chinese and German input methods (I can observe the systray icon change from de to zh or the other way round), IBus always reports the following: $ ibus engine xkb:us::eng Chinese input does not work (the keyboard changes to US though). When switching to German, then everything works as expected, even though IBus still reports xkb:us::eng as the engine in use. I found this workaround $ ibus engine rime $ ibus engine rime By manually setting the IBus engine, Chinese input works as expected. Do you have a clue how to make IBus change to the right engine after switching input methods? Or is it likely to be misconfiguration in my locale settings? Cheers, Julius

2 2

[arch-general] Super weird dd problem.
by Alfredo Palhares 10 Jun '13

10 Jun '13

Hello, So I was creating a archlinux usb bootable drive: [root@masterkorp-laptop Downloads]# dd bs=4M if=archlinux-2013.06.01-dual.iso of=/dev/sdb 130+1 records in 130+1 records out 548405248 bytes (548 MB) copied, 0.964976 s, 568 MB/s I was like WOW, this was too fast! But nothing ever gets written to the pen drive. To add to the weird factor, a dd to dev/sdb1 (partition) works as it should, slowly. But then ofcourse the iso gets unbootable. The md5sum on the iso is correct. I tried with diferent pen drives. Please, any suggestions is welcome. -- Regards, Alfredo Palhares

8 12

[arch-general] uml_utilities dropped?
by Brock Zheng 10 Jun '13

10 Jun '13

Hi, all I found that uml_utilities vanished in the repo. It can't be found in core/extra/communit repo, and also AUR . I need the command "tunctl" to install tap0 NIC, which is used to setup my qemu virtual machine. Any comment? -- Brock Zheng <goodmenzy(a)gmail.com> 郑祎 Software Enginner GnuPG key ID : 90C99215 GnuPg key fpr : EF09 4CD7 A64A 1034 4C6C 0078 EC76 1286 90C9 9215 Key Server : http://pgp.mit.edu

2 1

[arch-general] Is erlang-nox dropped?
by XeCycle 10 Jun '13

10 Jun '13

Hello, On yet another -Syu this morning I was asked whether to replace erlang-nox by erlang. Are we dropping the -nox variant? I'm using -nox for I don't need GUI in erlang now; also wxgtk pulls in gstreamer as a dependency, which I don't like. -- Carl Lei (XeCycle) Department of Physics and Astronomy, SJTU OpenPGP public key: 7795E591

3 6

Re: [arch-general] [aur-general] /bin/false exited with status 1
by John Briggs 10 Jun '13

10 Jun '13

On Sun, Jun 09, 2013 at 09:30:03AM +0100, Leonidas Spyropoulos wrote: > On Fri, Jun 7, 2013 at 3:38 PM, Martti Kühne <mysatyre(a)gmail.com> wrote: > > On Mon, Jun 3, 2013 at 11:35 PM, Leonidas Spyropoulos > > <artafinde(a)gmail.com> wrote: > > [...] > >> Any other suggestion from someone ? > >> > > > > It is my intention to help you. Please bear with us. > FYI I recently installed mpd according to the ArchWiki page. I initially had problems with starting systemd --user similar to what you are describing but after a reboot everything worked OK. John

1 0

[arch-general] Why is webkitgtk2 flagged out of date?
by Karol Blazewicz 10 Jun '13

10 Jun '13

https://www.archlinux.org/packages/extra/i686/webkitgtk2/ Flagged out-of-date on 2013-03-27 Last Updated: 2013-05-06 19:52 UTC

3 2

Re: [arch-general] Super weird dd problem.
by Toyam Cox 10 Jun '13

10 Jun '13

On Sun, Jun 9, 2013 at 5:23 PM, Alfredo Palhares <masterkorp(a)masterkorp.net>wrote: Hello, So I was creating a archlinux usb bootable drive: [root@masterkorp-laptop Downloads]# dd bs=4M if=archlinux-2013.06.01-dual.iso of=/dev/sdb 130+1 records in 130+1 records out 548405248 bytes (548 MB) copied, 0.964976 s, 568 MB/s I was like WOW, this was too fast! But nothing ever gets written to the pen drive. To add to the weird factor, a dd to dev/sdb1 (partition) works as it should, slowly. But then ofcourse the iso gets unbootable. The md5sum on the iso is correct. I tried with diferent pen drives. Please, any suggestions is welcome. -- Regards, Alfredo Palhares When I first learned DD, to create bootable disks, 1M was the suggested size because you could manage to miswrite with something larger. The caution was: "Use 1M to restrict your speed so that it writes properly" which I never actually understood, but never had a problem with. Only recently have I seen the suggestion to use 4M, but always with 1M as the fallback option if it doesn't work. -- - Toyam

1 0

Re: [arch-general] [aur-general] /bin/false exited with status 1
by Leonidas Spyropoulos 09 Jun '13

09 Jun '13

On 1 Jun 2013 20:06, "Curtis Shimamoto" <sugar.and.scruffy(a)gmail.com> wrote: > > On 06/01/13 at 07:44pm, Leonidas Spyropoulos wrote: > > I am getting this error when I try to use the systemd as user. I used > > to have mpd set up as user with systemd before some updates, but > > recently I didn't test it. How could I debug that to find the issue? > > > First of all, I want to ask if you are aware you have sent this to > [aur-general] and not [arch-general]. I think your question has little > to do with the AUR. Apologies, you are right, my intention was to send it to general. > > Also, there is a page in teh Arch Wiki that covers setting up user > sessions with systemd.[1] Have you taken a look that this? Setup is not > quite simply making services and then calling "systemd --user". I had followed that page on the wiki, I will double check my configuration is correct. > > > $ systemctl --user status mpd.service > > Failed to issue method call: Process /bin/false exited with status 1 > > This is what happens if you don't set up the necessary things that are > described in the wiki. But if you are using linux-ck, you should know > that even if you set things up, you will still get this because the bfs > patchset actually disables some cgroup setting in the kernel that are > necessary for user sessions to work. I am using stock kernel. > > [1] https://wiki.archlinux.org/index.php/Systemd/User > > Regards, > -- > Curtis Shimamoto > sugar.and.scruffy [at] gmail.com Thanks for the suggestions. Leonidas

2 3

[arch-general] Updating KDE whilst logged in causes loss of background wallpaper image
by Mike Cloaked 08 Jun '13

08 Jun '13

There is a KDE bug that has been around for some time which is in the upstream report at https://bugs.kde.org/show_bug.cgi?id=300708 which seems to be that if you update KDE (as in today's update to KDE 4.10.4-1) whilst being logged in to KDE you can lose your background wallpaper image. Updating from a text console without being logged in to the graphical desktop does not cause the issue to happen. There is a workaround in the first comment in the report link above in case anyone gets caught by this. -- mike c

1 0

[arch-general] /bin symlink breaking fetchmail
by Scott Lawrence 07 Jun '13

07 Jun '13

Hey all, In short, the latest upgrade seems to have borked fetchmail: fetchmail: Error writing to MDA: Broken pipe Deleting the /bin symlink and creating a /bin directory containing only a symlink /bin/sh pointing to /usr/bin/bash, makes fetchmail work again. Running `strace -vf fetchmail` reveals that the execve("/bin/sh"...) call returns EPERM. I'm well and truly stumped. I'm using courier-mta as my mda, but that shouldn't be relevant. Has anybody encountered this? Thanks, -- Scott Lawrence Linux baidar 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux

5 6

[arch-general] Crashing in libreoffice on certain .odp (Impress) files
by Oon-Ee Ng 05 Jun '13

05 Jun '13

Yesterday I used libreoffice to present a lecture from 3-4pm. Today morning I tried to open the exact same file and got immediate crashing. 2 of my lecture slides have this problem, 2 do not. In between, I updated to [testing] (this is a new laptop) and did quite a few installs, but none (except the big [testing] update for the /usr/bin move) seem related. See [1]. I have tried deleting ~/.config/libreoffice, to no avail. No error logs that I can see on the terminal (does libreoffice spit out errors anywhere?). Backups of the lecture slides (before small modifications which I may/not have made also exhibited the same behaviour. Googling shows various unrelated (I think) problems which seem to already be fixed in the latest libreoffice, mainly solved by deleting the .config/libreoffice folder (which I've tried). Suggestions please. [1] - http://pastebin.com/P4XE1uea

1 2

[arch-general] Rivendell PKGBUILD
by Sébastien Leblanc 04 Jun '13

04 Jun '13

Hey folks! I updated my PKGBUILD file and submitted it to the Arch User Repository, if anyone is interested. It is the 2.5.1 version of Rivendell https://aur.archlinux.org/packages/rivendell/ Let me know if you are having any issues. For now, I am having trouble with rdcartslots: it will not run at all. Maybe someone can help me out. I have not done thorough testing, but most everything else should work correctly. -- Sébastien Leblanc

1 0

Re: [arch-general] [pacman-dev] Please make the colourised output exactly like that of "pacman-color"
by Genes Lists 03 Jun '13

03 Jun '13

Curious if these colorization effects are aware whether terminal pacman is running in has light or dark background and adjust accordingly - or do they rely on some other setting to accommodate? Thanks for any insight. Gene

2 1

[arch-general] About /usr/local/sbin -> bin move
by Rodrigo Rivas 03 Jun '13

03 Jun '13

Dear ArchGeneral List, First of all, congratulations for another brave step forward with the /*bin -> /usr/bin move. All my Arch boxes upgraded with no pain. But I've noticed that there has been some discussion about moving /usr/local/sbin -> /usr/local/bin. Beware! There are packages out there that are distributed as tarballs and install themselves on /usr/local. I don't know how frequent they are, but I've seen them. And if they happen to contain any file in /usr/local/sbin, when untarring, it will silently overwrite the symbolic link with the real directlry breaking any application that depends on it, and making future upgrades to `filesystem` impossible. Yes, it can be fixed simply running tar with the -h (--dereference) flag, but who will remember that? Just my 0.02€. Best regards. -- Rodrigo

3 2

[arch-general] Systemd screen brightness
by Michael Nawrocki 03 Jun '13

03 Jun '13

Hey everyone, I'm trying to get my laptop backlight keys (fn+f6/f7) to adjust the brightness of my toshiba laptop backlight. Previously, I had entered the following in my /etc/acpi/handler.sh to handle the acpi events generated when those keys were pressed: video/brightnessdown) echo $(($(cat /sys/class/backlight/acpi_video0/brightness) -1)) > /sys/class/backlight/acpi_video0/brightness ;; video/brightnessup) echo $(($(cat /sys/class/backlight/acpi_video0/brightness) +1)) > /sys/class/backlight/acpi_video0/brightness ;; However, as I am working on migrating to systemd, acpid no longer runs and hence does not handle these events. How can I write a similar handler into systemd? Thanks, Mike

7 11

[arch-general] [FYI] On ardour 3.1.10 and jack2-multilib 1.9.9.5
by Rashif Ray Rahman 02 Jun '13

02 Jun '13

Hello folks This is just a note so that you don't have to flag these packages unnecessarily: * ardour 3.1.10 is _not_ a source release It is a binary-only update from upstream. "The source code release remains unchanged (since translations are generated during the build process)." [1] :: Therefore extra/ardour 3.1-1 is current. * jack2 1.9.9.5 does not support mixed mode The 1.9.8 release is the last version of jack2 that supports the --mixed flag for direct 32-bit support on 64-bit. [2] A move to a traditional lib32 package is planned. :: Therefore community/jack2-multilib 1.9.8-4 is as current as possible. [1] https://community.ardour.org/node/7020 [2] https://github.com/jackaudio/jack2/issues/21 -- GPG/PGP ID: C0711BF1

1 0

Re: [arch-general] [arch-dev-public] /usr move - update instructions
by David Benfell 02 Jun '13

02 Jun '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I'm assuming I can't post to arch-dev-public since I'm not a developer: On 06/01/2013 05:34 PM, Allan McRae wrote: > > 5) Update your system. # pacman -Syu --ignore filesystem,bash # > pacman -S bash # pacman -Su I'm wondering if this bit assumes that bash is the shell in use (I happen to prefer zsh). Thanks! - -- David Benfell / benfell(a)parts-unknown.org Please see https://parts-unknown.org/node/2 for GnuPG information (or the attachment you don't understand) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.20 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRqwCIAAoJELJhbl/uPb4SfHYQALHOgU4uKYKFTxIHkVCswtGV vhvZ/gP1Rw4nA8jap7K/XRuPMpdEdOWTSF9QpUTed7M2aucwvw7RGPLLTP/G8Dpw Y1pDqB9d2WHqP4HrMem7lDCH4+Aoy5zqoMQzd+/xZnT7BDOi0cEgNGDmfHDxPWxm UQH8dl+aBpGx3/+GBxnQEyIupxu44R/UAadVuYWD7sAR1E13etnHngJ8e+XiB1sP ZBcpBYdXAuD+JGmHtUSBqXxwYW629CN0cJ6MWCWh9EuWyvglhZY8U1Wrw4Y8Nxum fGkt9p3qNeumrD+nSxjFB+CgNOKXPxMieDdB8sheHgvs+X69p4W9hIddqR2t8o34 RGHIhunwJI8MuwQN8rExbD+EhhDHijOjpxyLxyM5adxxSzrJ0UT5m2fmnQ5IzcDc 4TQcT+/cr01JbuaH1N3jB+solzSvdrMi9GV0cbLDJst1FSSNSaNP0egvzkAAwmz+ iIjnoGk0fpmzVbwf3VLJDsIdPHoZtiyGha7naN96qRUv93QuHa3Ri0oF6zis3ogt QM0U0eGoWIDjc/jjkOsazRDUMXuki1CAVHVaCYpVIPKv4PKrz1+pgsQoAdGWbMzM IQITB6Q5dyj1niwKtHTfwvmAq7hqAW2/sHBgQ8ngnwNuNf1S+3VE3UE173/kxozb HQncuzFEwiLDSfEZXQAV =SIRe -----END PGP SIGNATURE-----

2 2

Re: [arch-general] [arch-notifications] Orphan Extra package [perl-net-server] marked out-of-date
by Florian Pritz 02 Jun '13

02 Jun '13

On 30.05.2013 23:18, Arch Website Notification wrote: > Insecure dependency in unlink while running with -T switch at /usr/share/perl5/vendor_perl/Net/Server/Daemonize.pm That has nothing to do with Net::Server, it's a bug in the code initially setting the variable used there. I have no idea why tainting behaviour seems to have changed with perl 5.18 (perldelta doesn't mention anything), but the only place I hit this problem was in spampd and there the variables were clearly tainted so I don't consider it a regression. If you are using that, please upgrade to the new version in AUR where I fixed those bugs. For more information about tainting please take a look at perlsec[1]. [1]: http://perldoc.perl.org/perlsec.html CC'ing arch-general since this might be interesting to someone.

2 1

Re: [arch-general] [arch-dev-public] /usr move - update instructions
by Karol Blazewicz 02 Jun '13

02 Jun '13

On 01/06/13 16:00, Allan McRae wrote: <snip> > 1) Fix any non-official packages with files in /bin, /sbin or /usr/sbin > to put those files in /usr/bin. The list of packages that are not in a > repo that need to be fixed can be generated using: > $ pacman -Qo /bin /sbin /usr/sbin | pacman -Qm - <snip> It should say $ pacman -Qqo /bin /sbin /usr/sbin | pacman -Qm -

1 0

[arch-general] DKIM signed messages to mailing list - issue
by Genes Lists 01 Jun '13

01 Jun '13

Each time I send to the arch list I get a postmaster complaint about DKIM from postmaster(a)bctpe4hbiu.org My domain DKIM signs all mail - however my DKIM signature is passed through by the mail list package and of course now the message will fail DKIM check as the header has been modified and is no longer coming from my domain. I guess the list should remove incoming DKIM headers? gene

2 2

[arch-general] Postfix and libsasl2.so.2 or libsasl2.so.3
by Dave Ariens 01 Jun '13

01 Jun '13

Hi guys, Is there an issue with the current postfix package? # pacman -S postfix dovecot :: Proceed with installation? [Y/n] ..... /usr/lib/postfix/post-install: Error: no postconf command found. Re-run this command as /usr/lib/postfix/post-install command_directory=/some/where. [root@vps2 ariens]# # which postconf /usr/sbin/postconf # postconf postconf: error while loading shared libraries: libsasl2.so.2: cannot open shared object file: No such file or directory # ldd /usr/sbin/postconf | grep libsasl libsasl2.so.3 => /usr/lib/libsasl2.so.3 (0x00007fde1c149000) libsasl2.so.2 => not found -- www.ariens.ca

2 1

Re: [arch-general] Finishing the /usr move
by Karol Blazewicz 01 Jun '13

01 Jun '13

https://mailman.archlinux.org/pipermail/arch-dev-public/2013-May/025026.html 3) Update your system: $ pacman -Syu --ignore filesystem $ pacman -Su It should say '#', not '$'.

7 13

[arch-general] openssl cant find root certificate
by G. Schlisio 31 May '13

31 May '13

hi list, if i run wpa_supplicant on a eap-ttls network, it fails to set up tls properly: OpenSSL: tls_connection_ca_cert - Failed to load root certificates error:02001002:system library:fopen:No such file or directory where does openssl search these ca-certs, where do i get them from (obviously not from the ca-certificates package, this is installed and contains .crt instead of .pem). isnt this supposed to work without manual intervention? any help appreciated. thanks georg

2 1

[arch-general] [signoff] syslinux-4.06-2
by Tobias Powalowski 31 May '13

31 May '13

Hi, please signoff syslinux-4.06-2 for the /usr/bin move. It will go direct to [core] repository, due to 5.01 sits in testing. Please download from here: https://dev.archlinux.org/~tpowa/syslinux/ thanks greetings tpowa -- Tobias Powalowski Archlinux Developer & Package Maintainer (tpowa) http://www.archlinux.org tpowa(a)archlinux.org

2 1

Re: [arch-general] [arch-dev-public] Adding !staticlibs to our default makepkg.conf
by Hussam Al-Tayeb 29 May '13

29 May '13

On Wednesday 29 May 2013 11:31:11 Allan McRae wrote: > We discussed removing static libraries for most packages back in March [1]. > > Now makepkg for pacman-4.1 has an option "staticlibs" that automatically > removes them. Should I make that the default in our makepkg.conf? > > Allan > > > [1] > https://mailman.archlinux.org/pipermail/arch-dev-public/2013-March/024552.ht > ml Why not check first which applications build with --disable-static? A few packages like libpng, etc.. can be compiled with --disable-static which feels like a more neat approach then deleting the static libraries.

2 1

Re: [arch-general] [arch-dev-public] Finishing the /usr move
by Paul Gideon Dann 29 May '13

29 May '13

On Wednesday 29 May 2013 18:13:01 Allan McRae wrote: > Yes - /sbin, /usr/sbin and /bin will all point at /usr/bin. So > hardcoded paths will not matter. Only file locations will. Just a little curious: does someone know what the reason is that we're moving everything to /usr/bin instead of /bin? Is there any significant advantage nowadays to having a separate /usr? I can understand a separate /home, /srv, or /var far more... Paul

2 2

[arch-general] Perl 5.18 in [testing]
by Florian Pritz 28 May '13

28 May '13

Hi, Perl 5.18, as any other new perl version, requires all modules that are not purely perl code to be rebuilt. We did that for all packages in our repos. For a list of upstream changes please refer to `man perldelta`. Since users probably installed some from AUR or with CPANPLUS::Dist::Arch, I wrote a script[1] that generates a local rebuild list. [1]: http://git.server-speed.net/bin/plain/find-broken-perl-packages.sh - raw.txt contains a list of files that generated an error - perl-modules.txt contains a list of modules the files belong to - perl-dists.txt contains a list of distributions - pacman.txt contains a list of pacman packages the files belong to Binaries linking with libperl.so will also need to be rebuilt. You can use lddd from devtools to find those. Please report any issue you encounter.

3 5

Re: [arch-general] [arch-dev-public] [RFC] Bluez 5
by Karol Babioch 26 May '13

26 May '13

Hi Tom, Am 13.05.2013 18:02, schrieb Tom Gundersen: > I would like to push Bluez 5 to the repos, and rename Bluez 4 to > 'bluez4'. Some things still require Bluez 4, and the two can not be > installed together, so this is how I propose to do it. > Any objections? I'm quite interested in Bluez 5 and would like to have it running as soon as possible ;). Any updates on the progress of your RFC? Do you have a list of applications currently not ready to work with Bluez 5 and still requiring Bluez 4 and its API? Best regards, Karol Babioch

2 2

[arch-general] Find out the changes that has done
by Gopalakrishnan NavaneethaKannan 23 May '13

23 May '13

Hi, I was trying to find out the content of a file has been modified. Basically two three peoples are keep on changing the file. And I want to know who has changes and what content has been modified. I tried find command, but again it shows only "find . -mmin -60" and "find . -cmin -60" but its listing out only the files that has changed not the contents. Also I tried auditd but again its not in user readable format. Any other way to see the files that has changed also the content that modified. Basically I want to maintain the changelog for future reference. Regards, Gopal. The information contained in this communication is intended solely for the use of the individual or entity to whom it is addressed and others authorized to receive it. It may contain confidential or legally privileged information. If you are not the intended recipient you are hereby notified that any disclosure, copying, distribution or taking any action in reliance on the contents of this information is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by responding to this email and then delete it from your system. iOPEX technologies is neither liable for the proper and complete transmission of the information contained in this communication nor for any delay in its receipt.

2 1

[arch-general] Building packages from AUR/ABS
by Joaquin Villanova 22 May '13

22 May '13

Hi, I've built Firefox 21 using Firefox 20 PKGBUILD, changing versions and reading the README notes on the source tarball, just for try. Should i expect any issue when installing? Is this a good method for a general purpose upgrading / downgrading? I mean, I can wait for this package because is in the extra repo, and is widely use and i know is going to be updated ASAP, but it should be good to know for other packages from AUR, or the main repos that doesn't get updated or get unmaintained. PD: I always flag packages that i found out of date! :)

3 2

[arch-general] Arch Linux Community on Gittip
by Karol Blazewicz 22 May '13

22 May '13

http://archlinux.me/dusty/2013/05/21/arch-linux-community-on-gittip/ Does this initiative have the Uber Archers blessing? Does it need one? I recall that there were issues regarding the official Google+ page even though it was started by an Arch dev, the info was posted on the forums https://bbs.archlinux.org/viewtopic.php?id=129923 and things seemed OK.

2 1

Re: [arch-general] [arch-dev-public] Dropping compiz?
by Bjoern Franke 21 May '13

21 May '13

> > And done. > Shouldn't emerald be dropped, too? -- xmpp bjo(a)schafweide.org bjo.nord-west.org | nord-west.org | freifunk-ol.de

2 1

[arch-general] Arch mailing list for subjective discussions
by Ralf Mardorf 19 May '13

19 May '13

Hallo, IMO the moderated Arch general list became a good list for technically issues and for briefly and succinctly objective discussions. This shouldn't change. First I didn't like it, but now I can see the advantages of such a list. What IMO is missing for Arch Linux is a separated mailing list for longer, subjective discussions. I'm aware that this is possible using the forums, but for my taste a mailing list is more comfortable to use. I wonder if there's an interest for such a mailing list and if somebody has got the knowledge and is willing to set up such a mailing list. The international Debian mailing list is free for longer, subjective discussions, but there anyway is a separated list, for completely off topic discussions. http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic There's no need to have a list for absolutely OT discussions for Arch Linux, as there is for Debian, but perhaps I'm not the only one who does like to get an Arch Linux mailing list for longer, subjective discussions. This comes into my mind, when I read a statement about the policy of Mint, thread: "Fully wroking GTK3(+GTK2) theme for Gnome 3.8?" E.g. desktop environments require sometimes discussions that IMO don't belong to Arch general, but there perhaps is the need to compare notes. What do you think about an additional mailing list for discussions that are OT for Arch generell? Regards, Ralf

7 9

Re: [arch-general] Arch mailing list for subjective discussions
by phani 19 May '13

19 May '13

On Sun, 19 May 2013 18:29:48 +0530, Ralf Mardorf <ralf.mardorf(a)alice-dsl.net> wrote: > I agree that fragmentation would be self-defeating. If you would be > willing to host a "real" list, free from Google, it would be great :). > Goggle IMO is a cut both ways thingy. apart from privacy issues, googlel groups isn't a real mailing list. i do manage one, and i hate that it's interface encourages people to use HTML and senseless quoting. i would use GNU's mailman, unless somebody else has a better idea. and i'm still not sure that another mailing list really is a good idea, because simply by existing it would contribute to fragmentation of the available knowledge base. [sorry for the unintended private reply earlier.] -- phani.

1 0

Re: [arch-general] Sound broken, using pulse audio
by BlissSam 19 May '13

19 May '13

On Sat, 18 May 2013 13:03:19 -0500, <calegria(a)gmail.com> wrote: > Thanks a lot for your reply, > > Unfortunately, that is not working. Have found a bug in the Kernel (from > another email here) that behaves in a similar way. Maybe having the same > issue (https://bugzilla.kernel.org/show_bug.cgi?id=58351) > > Also, I think it is an Alsa issue. I disabled PulseAudio and the audio is > still not working through Alsa. I am the submitter of that kernel bug. I am having Intel sound card and the problem only happened after upgrading to 3.9 kernel. That problem is in fact initialization failure for Conexant codec. Does your sound card use Conexant codec, too? You may get everything needed for troubleshooting by looking at [1] for alsa-info.sh scripts. Run it with --no-upload. If your sound works in 3.8 kernel, run it in both 3.8 and 3.9 kernel. That is useful if you really decide to submit a bug report or just wonder whether your problem is the same as mine. Hope to get your problem solved. Note: [1]: http://www.alsa-project.org/main/index.php/Help_To_Debug_Intel_HDA#Reportin…

1 0

Re: [arch-general] Sound broken, using pulse audio
by Carlos Alegria Galicia 18 May '13

18 May '13

> > On Fri, May 17, 2013 at 8:52 AM, Hussam Al-Tayeb <hussam(a)visp.net.lb>wrote: >> >>> On Friday 17 May 2013 06:04:01 Carlos Alegria Galicia wrote: >>> > Hi all, >>> > >>> > After the last kernel upgrade, my sound is not working after weaking up >>> > from hibernate. >>> > >>> > The device "PulseAudio" is shown in alsamixer, PulseAudio is up and >>> > running, the channels are shown in pavucontrol and even the level >>> sound bar >>> > is showing the audio levels, but there is no sound. >>> > >>> > Everything works after shutting down - starting up again my system (not >>> > even using restart). I am using systemd to hibernate / restart my >>> laptop. >>> > >>> > Thanks in advance, >>> >>> A quick google search suggests you are fix that by restarting the pulse >>> audio daemon. >>> Try this in a terminal window: >>> pulseaudio -k >>> pulseaudio -D >>> >> Thanks a lot for your reply, Unfortunately, that is not working. Have found a bug in the Kernel (from another email here) that behaves in a similar way. Maybe having the same issue (https://bugzilla.kernel.org/show_bug.cgi?id=58351) Also, I think it is an Alsa issue. I disabled PulseAudio and the audio is still not working through Alsa.

1 0

[arch-general] Fully wroking GTK3(+GTK2) theme for Gnome 3.8?
by Magnus Therning 18 May '13

18 May '13

It seems it's a rather common problem that GTK3 themes partly break Gnome3.8 by preventing having a nice desktop background while letting the file manager draw the background: https://bbs.archlinux.org/viewtopic.php?id=162204 https://bbs.archlinux.org/viewtopic.php?id=161918 I've so far found only two (2!) GTK3 themes that work in this respect, the default theme Adwaita that ships with Gnome3.8 and Nokto3.8 (http://gnome-look.org/content/show.php?content=158033) I'm not particularly pleased with the aesthetics of either of them though. What's causing this behaviour in themes? (Hopefully it's easy to fix the broken themes I come across.) What other themes have you found that work properly? /M -- Magnus Therning OpenPGP: 0xAB4DFBA4 email: magnus(a)therning.org jabber: magnus(a)therning.org twitter: magthe http://therning.org/magnus

3 2

[arch-general] Problem with libimobiledevice, ifuse, and idevices
by Joaquin Villanova 17 May '13

17 May '13

Think something is broken in gvfs-afc, ifuse and friends while working with idevices. Nautilus shows me the devices in the right panel (the favorites one), both documentiation and the device itself and always show this error when trying to mont. <code>Message did not receive a reply (timeout by message bus)</code> I think I've done my homework on bbs, #archlinux and googling, and found the only way peopple resolved this problem was with ppas in *buntus so i want to look deeper... Also i got this from dmesg output when trying to mount manually with ifuse: <code> [ 105.595108] ifuse[500]: segfault at 2dd0 ip 00007ff49b7efc05 sp 00007ff4998e5cd8 error 4 in libimobiledevice.so.4.0.1[7ff49b7e3000+1a000] </code> But the interesting part is that <b> Shotwell can import photos from the device </b>. Surprisingly Rhytmbox cannot play music from it. In an iPad2 ( i'm going to suggest to Apple to change its name to <b> iCrap </b>) neither Shotwell or Rhythmbox can get photos/music from the device. I'm running iOS 6.3 (latest version). Also for more info here is my uname -a, also i think is important to mention that i'm using GNOME (latest version from main repos). <code> Linux arch 3.9.2-1-ARCH #1 SMP PREEMPT Sat May 11 20:31:08 CEST 2013 x86_64 GNU/Linux </code> I'm happy enough because i can retrieve at least the photos from the iPhone, but is annoying that this stopped to work.

1 0

[arch-general] about the removal of that systemd symlink...
by David Benfell 17 May '13

17 May '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I was alarmed, I think unnecessarily, when I saw the message that a symlink for systemd was removed on an upgrade. As near as I can tell, the boot sequence still relies on init, which links to the right place. Is there a better way to keep track of changes like this so I'm not surprised? Thanks! - -- David Benfell / benfell(a)parts-unknown.org Please see https://parts-unknown.org/node/2 for GnuPG information (or the attachment you don't understand) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRkHrTAAoJELJhbl/uPb4S6tcQAK/0+I/V2hLh94JZJG6XOgL7 FCgFxTz0SIm54xkiL+SeqI+6Zsf13eBneyf9udYqh9s08bSdHq+e9IgvrLkMVd3W vEu2uGN7tpB2zAvJVOxlplbTkDJzIh2C65KVlA8/4xhiGkhITtr/bdTflSxTG1Of dp3I+MDa1oE4HOQSXTtbnnFF6n1cnq94cGgGt7lFhds4yHaFNVkne1mGnoZ23mhp DJBKpIN+VM/rmFGnWjDHfW/LOE3Ic+UX5ClhcrnW1fT7U0GJuM2rrckYRl3HQ7/2 tRon9UDO7cmYNQG+E4TNH6fXAe3qT2/RLJkukIH4YikG5b51OPyh/MdV+I/j81sZ Wlh/duIVI7fhbRUdQUvhFPQ6VkTmnfzKHHwVXV0RoKdMCGn2mlifU3/ufBf56Lin D9adcI50RNN+uSTRclVSSZTP0RfgFulzCozZBYoAuNgbbhnPWTSFHNMygXQPieUc rbmg0/To9GCzRQ2IbCQiWBmEV5i+Pn7dFCphfApnk2/1NzpSFv1ieovRz0K0PgAd lYvtLkGT1JdDQAkoMTHnGPniF5oDXssQLoR+Zc+GYKVC49FmDttwItYmbQK4zuoN XUokpqOCy8WsllsZgq1yyjktkmymBYkU7Xa5s4NwzKLo/cdGGndqx5RgyQ/DtZDy dKTGByEE+J3UXG6JLxKm =QoPf -----END PGP SIGNATURE-----

7 11

[arch-general] Sound broken, using pulse audio
by Carlos Alegria Galicia 17 May '13

17 May '13

Hi all, After the last kernel upgrade, my sound is not working after weaking up from hibernate. The device "PulseAudio" is shown in alsamixer, PulseAudio is up and running, the channels are shown in pavucontrol and even the level sound bar is showing the audio levels, but there is no sound. Everything works after shutting down - starting up again my system (not even using restart). I am using systemd to hibernate / restart my laptop. Thanks in advance, -- Carlos Alegría Galicia,

2 1

[arch-general] Broken sound with Linux 3.9.2 on Acer laptop
by BlissSam 17 May '13

17 May '13

After upgrading to 3.9.2 kernel, the sound did not work. However, the system CAN recognize my sound card, and my sound card appeared in `alsamixer` Downgrading the kernel can solve the problem. Providing more info: Acer Aspire laptop, with Intel i5 CPU, 2nd generation SandyBridge. `uname -a`: > Linux brilliant-laptop 3.9.2-1-ARCH #1 SMP PREEMPT Sat May 11 20:31:08 CEST 2013 x86_64 GNU/Linux `lspci | grep Audio`: > 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) `dmesg`: > Pasted here: http://p.vim-cn.com/cbbcw `cat .pulse/daemon.pa`: > default-sample-rate = 48000 > alternate-sample-rate = 44100 > default-sample-format = float32le `cat /etc/modprobe.d/alsa-base.conf`: > options snd-hda-intel model=acer (This file aims to fix another bug. Trying to remove this file could not fix this problem. I paste this file only because it is related to sound.) `lsmod`: > Pasted here: http://p.vim-cn.com/cbbcx

3 3

[arch-general] 'Check out-of-date packages' tool
by Anatol Pomozov 17 May '13

17 May '13

Hi everyone Per discussion in 'pacman-dev' maillist [1] I implemented a tool that tries to find Arch out-of-date packages. The tool scans PKGBUILD files is /var/abs directory, extracts download url and then tries to probe download urls for the next version. Next versions look like X.Y.Z+1 X.Y+1.0 X+1.0.0 If any of the new versions presents on the download server it reports to user as 'new version available'. Here is the tool sources https://github.com/anatol/pkgoutofdate To make its usage even more pleasant I added it to AUR https://aur.archlinux.org/packages/pkgoutofdate-git/ To use it please install pkgoutofdate-git package: $ yaourt -S pkgoutofdate-git Then update abs database and run tool itself: $ sudo abs && pkgoutofdate That's it. The result looks like ....... closure-linter: new version found - 2.3.8 => 2.3.9 perl-data-dump: new version found - 1.21 => 1.22 wgetpaste: new version found - 2.20 => 2.21 fillets-ng-data: new version found - 1.0.0 => 1.0.1 tablelist: new version found - 5.5 => 5.6 ...... There are some fals positive and negative results though, mostly because download servers return different sort of weird responses. I still work on work-arounds for all these cases. Hope you find this tool useful and it will help to make Arch software even more bleeding edge. [1] https://mailman.archlinux.org/pipermail/pacman-dev/2013-March/thread.html#1…

4 8

[arch-general] libsasl issue today with pacman updates
by Mike Cloaked 15 May '13

15 May '13

There seems to have been a problem with pacman update today: :: Starting full system upgrade... resolving dependencies... looking for inter-conflicts... error: failed to prepare transaction (could not satisfy dependencies) :: cyrus-sasl: requires libsasl=2.1.23 :: cyrus-sasl-gssapi: requires libsasl=2.1.23 Yet the current version is the above referred version but libsasl won't update on its own! [root@home1 ~]# pacman -Ss libsasl core/libsasl 2.1.26-2 [installed: 2.1.23-10] Cyrus Simple Authentication Service Layer (SASL) Library [root@home1 ~]# pacman -S libsasl resolving dependencies... looking for inter-conflicts... error: failed to prepare transaction (could not satisfy dependencies) :: cyrus-sasl: requires libsasl=2.1.23 :: cyrus-sasl-gssapi: requires libsasl=2.1.23 I am confused! -- mike c

2 2

[arch-general] gcc: loop do not terminate
by LANGLOIS Olivier PIS -EXT 14 May '13

14 May '13

I have just been hit by something: lano1106@hpmini ~/dev/gcc-test $ g++ --version g++ (GCC) 4.8.0 20130502 (prerelease) Copyright (C) 2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. lano1106@hpmini ~/dev/gcc-test $ g++ -O2 -o test1 test1.cpp test1_init.cpp lano1106@hpmini ~/dev/gcc-test $ ./test1 item 0 a: 1 lano1106@hpmini ~/dev/gcc-test $ g++ -O1 -o test1 test1.cpp test1_init.cpp lano1106@hpmini ~/dev/gcc-test $ ./test1 item 0 a: 1 lano1106@hpmini ~/dev/gcc-test $ g++ -O0 -o test1 test1.cpp test1_init.cpp lano1106@hpmini ~/dev/gcc-test $ ./test1 item 0 a: 1 item 1 a: 2 lano1106@hpmini ~/dev/gcc-test $ cat test1.h struct A { int a; int b; int c; }; struct B { int numelem; /* * Old C trick to define a dynamically sizable array just by allocating * sizeof(B) + (numelem-1)*sizeof(A) memory. */ A item[1]; }; void initArr(B *p); lano1106@hpmini ~/dev/gcc-test $ cat test1_init.cpp #include "test1.h" void initArr(B *p) { p->numelem = 2; p->item[0].a = 1; p->item[1].a = 2; } lano1106@hpmini ~/dev/gcc-test $ cat test1.cpp /* * Author: Olivier Langlois <olivier(a)trillion01.com> * * Purpose: Small test to highlight gcc optimization bug */ #include <stdio.h> #include <string.h> #include "test1.h" /* * Create a B array with the intent of only using the first item. * The 19 other items sole purpose is to create a buffer large enough * to accomodate A array needs. */ #define MAXBLEN 20 int main(int argc, char *argv[]) { B arr[MAXBLEN]; memset(arr,0,sizeof(arr)); initArr(arr); for( int i = 0; i < arr[0].numelem; ++i ) { printf( "item %d\n" " a: %d\n", i, arr[0].item[i].a); } return 0; } >From gcc website, this is not a bug: Loops do not terminate This is often caused by out-of-bound array accesses or by signed integer overflow which both result in undefined behavior according to the ISO C standard. For example int SATD (int* diff, int use_hadamard) { int k, satd = 0, m[16], dd, d[16]; ... for (dd=d[k=0]; k<16; dd=d[++k]) satd += (dd < 0 ? -dd : dd); accesses d[16] before the loop is exited with the k<16 check. This causes the compiler to optimize away the exit test because the new value of k must be in the range [0, 15] according to ISO C. GCC starting with version 4.8 has a new option -fno-aggressive-loop-optimizations that may help here. If it does, then this is a clear sign that your code is not conforming to ISO C and it is not a GCC bug. I am surprised that I didn't hit the problem before but I am seriously considering using '-fno-aggressive-loop-optimizations' in my own makepkg.conf. I just want to test others feeling on this discovery to see if it wouldn't be a good idea to make the switch standard in Arch... ________________________________ CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium.

6 16

[arch-general] libvirtd - save shutdown and systemd
by Guus Snijders 14 May '13

14 May '13

Hey all, I'm pretty sure this is a fairly basic question, but i am a bit confused on systemd targets. It has been a while since i converted my systems to systemd and most of it seems to be working ok. Now i am looking for a way to automatically save my VM's to disk in case i forget to shutdown/save one before shutting down the host. After some searching, i stumbled upon this in man systemd-halt.service: " Immediately before executing the actual system halt/poweroff/reboot/kexec systemd-shutdown will run all executables in /usr/lib/systemd/system-shutdown/ and pass one arguments to them: either "halt", "poweroff", "reboot" or "kexec", depending on the chosen action. All executables in this directory are executed in parallel, and execution of the action is not continued before all executables finished. " So at least one way would be place a script that calls "/etc/rc.d/libvirtd-guests stop" (or equivalent, it's not hard to replace) in /etc/systemd/system-shutdown/ . My main question is if this would be a "correct" way or that i could better write some custom unit file to do this? The tricky part is that i am /not/ interested in an automatic resume of previously running guests, only saving them in case i forgot. I'd be very interested in hearing opinions. mvg, Guus

2 3

[arch-general] gtkmm and VMware Workstation
by Guillermo Leira 13 May '13

13 May '13

Hello! An advice for VMware Workstation users: upgrading to gtkmm 2.24.3-1 on x86_64 makes VMware Workstation 8.0.6 crash on start or after a few seconds. I don't know about other versions. It happens with kernel 3.8.11 and 3.9.2. Downgrading to gtkmm 2.24.2-2 solves it (after an hour of trial and error). I'll create a bug report tomorrow. Too late for me now. Best Regards, Guillermo Leira

1 0

[arch-general] Linux 3.9.2-1-ARCH cures blank screen
by Whiskers 13 May '13

13 May '13

The blank screen I first reported in January with Linux-3.7.3-1-i686 seems to have been cured by the latest update to Linux-3.9.2-1-i686 (and/or other updates that have happened at the same time). (Using the nouveau graphics driver). But the desktop and mouse settings in XFCe4 aren't all working. -- -- ^^^^^^^^^^ -- Whiskers -- ~~~~~~~~~~

5 7

[arch-general] RME cards: How to show board revision and the loaded firmware version?
by Ralf Mardorf 13 May '13

13 May '13

Preliminary question and regarding to this question multiposted: Does anybody still use a RME HDSPe AIO ;)? Hi, since the issues I get for my RME HDSPe AIO didn't became less, but more within the last two years, I cleaned a primary partition to install XP, just to test, if there are issues caused by the mobo, that will appear, even when not using a *nix driver, but the proprietary driver and latest RME firmware. I'm a Linux only user, so sometime ago I installed FreeBSD, just to test, if the RME card isn't borked, since on Linux only 2 ADAT channels do work, fortunately all 8 ADAT channels work, using the FreeBSD driver (no TotalMix). I bought the card, because it was recommended by members of the Linux audio community. Don't get me wrong, the blame is on me, I decided to buy the card and had no time to use it within the first weeks, I only want to point out, that I did research before I bought the card. I wonder, if there are different revisions of the RME board? I know I've written this several times, but somebody might not have read it and it's a while ago since I ask for the situation of this card on other machines. Is there a command that shows the board revision and used firmware version? I run my Arch install without the alsa-firmware package and installed it now. $ uname -r 3.8.11-rt8-1-rt $ pacman -Q alsa-firmware error: package 'alsa-firmware' was not found $ sudo pacman -Syu alsa-firmware warning: ardour: ignoring package upgrade (2.8.16-1 => 3.1-1) alsa-firmware-1.0.27-2 $ pacman -Q alsa-firmware alsa-firmware 1.0.27-2 Can anybody use a HDSPe AIO on Linux with all available sample rates? Store alsamixer settings? Does hdspeconf run? Use latency <= 10.7 ms? Use any latency even => 10.7 ms with getting absolutely no xruns? Use all ADAT channels? [root@archlinux rocketmouse]# tuning ######################################################################## # service rtirq status PID CLS RTPRIO NI PRI %CPU STAT COMMAND 36 FF 90 - 130 0.0 S irq/8-rtc0 178 FF 85 - 125 0.0 S irq/18-snd_hdsp 179 FF 80 - 120 0.0 S irq/20-snd_ice1 180 FF 79 - 119 0.0 S irq/21-snd_ice1 75 FF 75 - 115 0.0 S irq/16-ohci_hcd 78 FF 75 - 115 0.0 S irq/19-ehci_hcd 86 FF 74 - 114 0.2 S irq/17-ohci_hcd 91 FF 73 - 113 0.0 S irq/17-ohci_hcd 34 FF 70 - 110 0.0 S irq/1-i8042 24 FF 50 - 90 0.0 S irq/9-acpi 51 FF 50 - 90 0.0 S irq/42-radeon 70 FF 50 - 90 0.0 S irq/14-pata_ati 71 FF 50 - 90 0.0 S irq/15-pata_ati 79 FF 50 - 90 0.0 S irq/22-ahci 165 FF 50 - 90 0.0 S irq/7-parport0 460 FF 50 - 90 0.1 S irq/43-enp3s0 3 FF 1 - 41 0.1 S ksoftirqd/0 13 FF 1 - 41 0.1 S ksoftirqd/1 # grep 18: /proc/interrupts 18: 0 4 IO-APIC-fasteoi snd_hdspm Mon May 13 10:31:03 CEST 2013 - 3.8.11-rt8-1-rt - Arch Linux \r (\l) [root@archlinux rocketmouse]# tuning-rice ######################################################################## # service rtirq status PID CLS RTPRIO NI PRI %CPU STAT COMMAND 36 FF 90 - 130 0.0 S irq/8-rtc0 178 FF 85 - 125 0.0 S irq/18-snd_hdsp 75 FF 75 - 115 0.0 S irq/16-ohci_hcd 78 FF 75 - 115 0.0 S irq/19-ehci_hcd 86 FF 74 - 114 0.2 S irq/17-ohci_hcd 91 FF 73 - 113 0.0 S irq/17-ohci_hcd 34 FF 70 - 110 0.0 S irq/1-i8042 24 FF 50 - 90 0.0 S irq/9-acpi 51 FF 50 - 90 0.0 S irq/42-radeon 70 FF 50 - 90 0.0 S irq/14-pata_ati 71 FF 50 - 90 0.0 S irq/15-pata_ati 79 FF 50 - 90 0.0 S irq/22-ahci 165 FF 50 - 90 0.0 S irq/7-parport0 460 FF 50 - 90 0.1 S irq/43-enp3s0 3 FF 1 - 41 0.1 S ksoftirqd/0 13 FF 1 - 41 0.1 S ksoftirqd/1 # grep 18: /proc/interrupts 18: 0 4 IO-APIC-fasteoi snd_hdspm Mon May 13 10:31:47 CEST 2013 - 3.8.11-rt8-1-rt - Arch Linux \r (\l) OT: I noticed a thread at LAU about a PCIe card from another vendor, that was recommended to work with Linux, but it doesn't (or didn't?). Are there any PCIe cards available in the price range and audio quality of the HDSPe AIO, that are DEFINITIVELY known as working with Linux? Regards, Ralf

1 0

[arch-general] problems while upgrading kdelibs
by Shridhar Daithankar 13 May '13

13 May '13

Hello, While upgrading kdelibs-4.10.2-4 x86_64, I am getting errors such as these.. kdelibs: /etc/dbus-1/system.d/org.kde.auth.conf exists in filesystem kdelibs: /etc/xdg/menus/kde-applications.menu exists in filesystem kdelibs: /usr/bin/checkXML exists in filesystem kdelibs: /usr/bin/kbuildsycoca4 exists in filesystem kdelibs: /usr/bin/kconfig_compiler exists in filesystem kdelibs: /usr/bin/kcookiejar4 exists in filesystem kdelibs: /usr/bin/kde4-config exists in filesystem kdelibs: /usr/bin/kded4 exists in filesystem There are total 3503 such errors, all for kdelibs only. As of now pacman reports that none of them are owned by any packages but thats a suspicious claim since it includes files like /usr/bin/kbuildsycoca4 and /usr/bin/kcookiejar4. Initially I thought it was a package sync error and any updated packages will be pushed soon. But after 4 days the situation persists. Has anybody else seen this? Should I just use --force? TIA.. Reference - generate file # pacman -Syu --noconfirm > pacman.upgrade.log 2>&1 - check error # grep -c exists pacman.upgrade.log 3503 - check conflicting packages # grep exists pacman.upgrade.log |grep -v kdelibs - check package ownership for file in $(grep exists pacman.upgrade.log|cut -f2 -d' ');do pacman -Qo $file;done 2>&1|grep -vi "No package owns" -- Regards Shridhar

1 1

[arch-general] Something going awry with gdm's handoff
by David Benfell 09 May '13

09 May '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, This is on an Asus notebook, a 64-bit system. I have attached an external keyboard, mouse, and a monitor. Disconnecting the monitor seems to make no difference. I think I'm not looking at a problem with Xorg. Here's the log, from journalctl -f during a failure: May 08 22:41:04 n4rky sudo[1617]: benfell : TTY=pts/0 ; PWD=/home/benfell ; USER=root ; COMMAND=/usr/bin/systemctl start gdm May 08 22:41:04 n4rky sudo[1617]: pam_unix(sudo:session): session opened for user root by benfell(uid=0) May 08 22:41:04 n4rky systemd[1]: Starting GNOME Display Manager... May 08 22:41:04 n4rky systemd[1]: Started GNOME Display Manager. May 08 22:41:04 n4rky sudo[1617]: pam_unix(sudo:session): session closed for user root n4rky% May 08 22:41:04 n4rky dbus-daemon[409]: dbus[409]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.67" (uid=0 pid=1620 comm="/usr/sbin/gdm ") interface="org.freedesktop.DBus.P...lay-id /org/gn") May 08 22:41:04 n4rky dbus[409]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.67" (uid=0 pid=1620 comm="/usr/sbin/gdm ") interface="org.freedesktop.DBus.Properties" member...play-id /org/gn") May 08 22:41:04 n4rky gdm[1620]: Child process 1627 was already dead. May 08 22:41:04 n4rky gdm[1620]: GLib-GObject: g_object_ref: assertion `object->ref_count > 0' failed May 08 22:41:04 n4rky gdm[1620]: GLib-GObject: g_object_unref: assertion `object->ref_count > 0' failed May 08 22:41:04 n4rky gdm[1620]: GdmDisplay: display lasted 0.047383 seconds May 08 22:41:04 n4rky gdm[1620]: GdmDisplay: display lasted 0.051042 seconds May 08 22:41:04 n4rky dbus-daemon[409]: dbus[409]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.67" (uid=0 pid=1620 comm="/usr/sbin/gdm ") interface="org.freedesktop.DBus.P...lay-id /org/gn") May 08 22:41:04 n4rky dbus[409]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.67" (uid=0 pid=1620 comm="/usr/sbin/gdm ") interface="org.freedesktop.DBus.Properties" member...play-id /org/gn") May 08 22:41:07 n4rky gdm[1620]: Failed to give slave programs access to the display. Trying to proceed. May 08 22:41:07 n4rky systemd-logind[408]: New session c3 of user gdm. May 08 22:41:07 n4rky systemd-logind[408]: Linked /tmp/.X11-unix/X1 to /run/user/120/X11-display. May 08 22:41:07 n4rky /usr/bin/dbus-launch[1644]: gnome-session[1644]: WARNING: Could not parse desktop file /usr/share/gdm/greeter/autostart/orca-autostart.desktop or it references a not found TryExec binary May 08 22:41:07 n4rky /usr/bin/dbus-launch[1644]: gnome-session[1644]: WARNING: could not read /usr/share/gdm/greeter/autostart/orca-autostart.desktop May 08 22:41:07 n4rky gnome-session[1644]: WARNING: Could not parse desktop file /usr/share/gdm/greeter/autostart/orca-autostart.desktop or it references a not found TryExec binary May 08 22:41:07 n4rky gnome-session[1644]: WARNING: could not read /usr/share/gdm/greeter/autostart/orca-autostart.desktop May 08 22:41:07 n4rky /usr/bin/dbus-launch[1644]: (gnome-settings-daemon:1664): GnomeDesktop-CRITICAL **: gnome_rr_output_info_get_geometry: assertion `GNOME_IS_RR_OUTPUT_INFO (self)' failed May 08 22:41:07 n4rky /usr/bin/dbus-launch[1644]: (gnome-settings-daemon:1664): GnomeDesktop-CRITICAL **: gnome_rr_output_info_get_geometry: assertion `GNOME_IS_RR_OUTPUT_INFO (self)' failed May 08 22:41:08 n4rky gnome-session[1644]: Entering running state May 08 22:41:08 n4rky colord[428]: Device added: xrandr-AU Optronics May 08 22:41:08 n4rky colord[428]: Device added: xrandr-Acer Technologies-Acer S201HL-LNY080034201 May 08 22:41:09 n4rky /usr/bin/dbus-launch[1644]: (gnome-settings-daemon:1664): Gvc-WARNING **: Failed to connect context: OK May 08 22:41:09 n4rky dbus-daemon[409]: dbus[409]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service' May 08 22:41:09 n4rky dbus[409]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service' May 08 22:41:09 n4rky systemd[1]: Starting Locale Service... May 08 22:41:09 n4rky dbus-daemon[409]: dbus[409]: [system] Successfully activated service 'org.freedesktop.locale1' May 08 22:41:09 n4rky dbus[409]: [system] Successfully activated service 'org.freedesktop.locale1' May 08 22:41:09 n4rky systemd[1]: Started Locale Service. May 08 22:41:09 n4rky colord[428]: Automatic metadata add icc-07603ee846b6cd69edcf95ebb436c168 to xrandr-Acer Technologies-Acer S201HL-LNY080034201 May 08 22:41:09 n4rky colord[428]: Profile added: icc-07603ee846b6cd69edcf95ebb436c168 May 08 22:41:09 n4rky colord[428]: Automatic metadata add icc-a23c742b0721880c9ee582a755391057 to xrandr-AU Optronics May 08 22:41:09 n4rky colord[428]: Profile added: icc-a23c742b0721880c9ee582a755391057 May 08 22:41:09 n4rky /usr/bin/dbus-launch[1644]: (gnome-shell:1671): Gvc-WARNING **: Failed to connect context: OK May 08 22:41:10 n4rky polkitd[432]: Registered Authentication Agent for unix-session:c3 (system bus name :1.77 [gnome-shell --mode=gdm], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) May 08 22:41:10 n4rky /usr/bin/dbus-launch[1644]: JS LOG: GNOME Shell started at Wed May 08 2013 22:41:10 GMT-0700 (PDT) May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: JS ERROR: !!! Exception in callback for signal: release May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: JS ERROR: !!! message = '"can't convert this._frame to an integer"' May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/panel.js"' May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: JS ERROR: !!! lineNumber = '121' May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: JS ERROR: !!! stack = '"Animation<._showFrame@/usr/share/gnome-shell/js/ui/panel.js:121 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: wrapper@/usr/share/gjs-1.0/lang.js:213 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: Animation<.play@/usr/share/gnome-shell/js/ui/panel.js:97 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: wrapper@/usr/share/gjs-1.0/lang.js:213 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: LoginDialog<._setWorking@/usr/share/gnome-shell/js/gdm/loginDialog.js:874 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: wrapper@/usr/share/gjs-1.0/lang.js:213 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: LoginDialog<._askQuestion/tasks<@/usr/share/gnome-shell/js/gdm/loginDialog.js:909 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: Task<.run@/usr/share/gnome-shell/js/gdm/batch.js:38 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: wrapper@/usr/share/gjs-1.0/lang.js:213 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: Batch<.runTask@/usr/share/gnome-shell/js/gdm/batch.js:120 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: wrapper@/usr/share/gjs-1.0/lang.js:213 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: ConsecutiveBatch<.process@/usr/share/gnome-shell/js/gdm/batch.js:186 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: wrapper@/usr/share/gjs-1.0/lang.js:213 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: Batch<.nextTask@/usr/share/gnome-shell/js/gdm/batch.js:137 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: wrapper@/usr/share/gjs-1.0/lang.js:213 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: ConsecutiveBatch<.process/signalId<@/usr/share/gnome-shell/js/gdm/batch.js:194 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: _emit@/usr/share/gjs-1.0/signals.js:124 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: Hold<.release@/usr/share/gnome-shell/js/gdm/batch.js:78 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: wrapper@/usr/share/gjs-1.0/lang.js:213 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: Hold<.acquireUntilAfter/signalId<@/usr/share/gnome-shell/js/gdm/batch.js:70 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: _emit@/usr/share/gjs-1.0/signals.js:124 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: Hold<.release@/usr/share/gnome-shell/js/gdm/batch.js:78 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: wrapper@/usr/share/gjs-1.0/lang.js:213 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: @/usr/share/gnome-shell/js/gdm/loginDialog.js:801 May 08 22:41:21 n4rky /usr/bin/dbus-launch[1644]: "' R May 08 22:42:02 n4rky dbus-daemon[409]: dbus[409]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service' May 08 22:42:02 n4rky dbus[409]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service' May 08 22:42:02 n4rky dbus[409]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or...ice' for details. May 08 22:42:02 n4rky NetworkManager[405]: <warn> error poking ModemManager: GDBus.Error:org.freedesktop.systemd1.LoadFailed: Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or d...ce' for details. May 08 22:42:02 n4rky dbus-daemon[409]: dbus[409]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load...ce' for details. gdm starts, I am able to select my user and enter a password. Then it seems to hang. This is a new behavior since rebooting this afternoon and I honestly don't know which of many upgrades I did prior to rebooting might be the cause. I *can* log in by doing CTRL-ALT-F2 and logging in there. I *can* run startxfce4 and get a graphical environment. (I don't know, these days, how to do the analog with cinnamon or gnome.) Does the log snippet above help at all? Thanks! - -- David Benfell / benfell(a)parts-unknown.org Please see https://parts-unknown.org/node/2 for GnuPG information (or the attachment you don't understand) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRizkYAAoJELJhbl/uPb4SY18P/0rq0cxzObQvuaeFMXWThsJr QNcLY4J4luqMbWcHvEJvnEc24z/7BVnysU8OQ7KgceXhXslfVidQNlmRgXRkBJbS zWNL7p8cPBfuvascCluz2z1Cm5ykhfLz5MMP3unrKxbwR08gZxBim42jgCxOe3jg YGeYr37KWqmzciu54PKh9wWuE0ji5JmsXnq3rXQ8AQpKOKAo5vyZsUjctOKqNDOS 3tVv7rB/RlOoOMZz6lnDIwS8yldk8Evarwi0dGnS8dq1EUrbkGfTHaMxXub1ZESn 4+SrFngDfU/kGih6yxysOqXy4+9rjZxBXV+qFZkQQ/xrEkt7BPsPgLgWyLztJtG3 4Z0P4WFZkRGrx6BK8fbPylawwWQqvN1YvejC799Gz+kAEHn+UUIa4/0jQ2sJnmJO MUbUj94KEVw+ncvjwkX4JTkeq35Z2v0KFFk1Frcri/S0gDN+X8K4Tgqi4V3Mk1eK zuroDZ/EOy75DMd16Gho31eKoCdb8SXRvY+E8I3/30lLEGnKNaNUy2+A+XFIiw1p DuApPA4+5UX3fl/CEH5J9NATImceIdDtjP6tN1ZQoOUqzU2bMPladAKz/Oq7wITe bil71MKU4grv2nJwOxRrcYpdvv895ZtTyhxLRaQLeWyq9X7/hIqm5ViYb2mInw9d kHjfoqov9G9PQxaAtcdK =WuY6 -----END PGP SIGNATURE-----

1 0

[arch-general] [linux] 3.8.12 is a binary module breaker, time to get 3.9.1 into [core]
by Tobias Powalowski 08 May '13

08 May '13

Hi guys, The 3.8.12 is a binary module breaker and cannot move to [core] as it is. I'll build and upload it, but not merge into [core]: https://dev.archlinux.org/~tpowa/linux Time to get 3.9.1 into [core]. Please test and signoff 3.9.1 real soon. greetings tpowa -- Tobias Powalowski Archlinux Developer & Package Maintainer (tpowa) http://www.archlinux.org tpowa(a)archlinux.org

1 0

[arch-general] Current "CPPFLAGS=-D_FORTIFY_SOURCE=2" break some builds
by Leonid Isaev 07 May '13

07 May '13

Hi, With gcc 4.8.0-4 I can no longer build core/links package from ABS, with SSL support. The issue is _not_related to makepkg (as I originally thought), even plain ./configure fails if I export CPPFLAGS=-D_FORTIFY_SOURCE=2, regardless of the content of {C,CXX,LD}FLAGS. Here is the error: -------------------- $ ./configure --with-ssl [ ... ] checking for openssl... yes checking OPENSSL_CFLAGS... checking OPENSSL_LIBS... -lssl -lcrypto checking for OpenSSL... no checking for OpenSSL... no configure: error: OpenSSL not found $ cat config.log [ ... ] configure:8095: checking for openssl configure:8102: checking OPENSSL_CFLAGS configure:8107: checking OPENSSL_LIBS configure:8139: checking for OpenSSL configure:8150: gcc -o conftest -g -O2 -D_FORTIFY_SOURCE=2 conftest.c -lssl -lcrypto -lm 1>&5 In file included from configure:8143:0: confdefs.h:8:16: error: duplicate 'unsigned' #define size_t unsigned ^ configure: failed program was: #line 8143 "configure" #include "confdefs.h" #include <openssl/ssl.h> int main() { SSLeay_add_ssl_algorithms() ; return 0; } -------------------- With gcc 4.7.2 all builds fine with Arch's default makepkg.conf, i.e. no "duplicate unsigned error". Also, unsetting CPPFLAGS allows a successfull build. Since core/links has been successfully rebuilt, what was the gcc version? ANd can anyone else confirm the above issue? TIA, L. -- Leonid Isaev GnuPG key: 0x164B5A6D Fingerprint: C0DF 20D0 C075 C3F1 E1BE 775A A7AE F6CB 164B 5A6D

4 6

[arch-general] Kernel panic at boot after hard reset: not syncing. No init found.
by Paul Hervot 07 May '13

07 May '13

Hello, I know some people had this problem before but no solution seems to help me. I was playing Kerbal Space Program, the game filled up my RAM, my computer was no longer responding (it happens to me a few times a month if I forgot to close firefox before playing for example). I had to hard shutdown, then on the boot I get this kernel panic. (Here is a screenshot: http://dettorer.net/kernel_panic.jpg) The init= parameter given by grub is correct: /usr/lib/systemd/systemd and I double checked the root= parameter, it is by uuid but I also tried by device name (/dev/sda7) and by label. I use three partitions: sda5: /boot (sda6: swap) sda7: / sda8: /home `fdisk -l /dev/sda` http://paste.awesom.eu/ux8 `ls -l /dev/disk/by-uuid` http://paste.awesom.eu/85U Using the output of a new `grub-mkconfig` didn't fix it either. Here is my grub.cfg: http://paste.awesom.eu/aDR I tried running `mkinitcpio -v -p linux` (I use the 3.8 kernel from core but also tried the 3.9 from testing, same result) Here is my mkinitcpio.conf: http://paste.awesom.eu/yVH and the output of `mkinitcpio -v -p linux` http://paste.awesom.eu/6f3 I checked the filesystems of my / and /boot partitions with badblocks and fsck, no problem from here. (I also tried reformating my swap with mkswap as the second line of kernel panic mention swapper even though I didn't understand that line, I just gave it a try). I don't know what to do now, my guess is that the initramfs can't mount the root partition but the root= parameter is correct and everything mount well under a liveCD (this is from where I try to fix it). PS: It's my first post on arch-general, sorry if my question is off-topic or poorly presented. -- Dettorer

2 4

[arch-general] libxml2 out of date
by Ross Lagerwall 07 May '13

07 May '13

Hi, Is there a reason (other than lack of time) that libxml2 has not been updated from 2.8 to 2.9 (now 2.9.1)? Regards -- Ross Lagerwall

5 8

[arch-general] Failed to mount real root device
by Bytecounter 07 May '13

07 May '13

Hi @all I tried to boot archlinux 2013.04.01 from CD. On my laptop all seems ok, but on a thin client an error occurs: "Failed to mount real root device" This is the output: :: Device ,/dev/disk/by-label/ARCH_201304' mounted successfully :: Mounting /run/archiso/cowspace (tmpfs) filesystem, size=75%... :: running late hook [archiso_pxe_common] :: running cleanup hook [archiso_shutdown] :: running cleanup hook [udev] ERROR: Failed to mount real root device Bailing out, . What happens? Remember, please, it is the original ISO, not an installed system! Other systems boot without errors from this CD. Some hardware information: CPU AMD GeodeT LX 800 GPU Integrated in the CPU RAM 512MB Thank you for any tips Mathias

1 0

[arch-general] Linode with stock linux-lts
by Patrick Donnelly 07 May '13

07 May '13

Does anyone have this working with the latest grub+linux-lts? I've been trying to follow the steps on [1] but have had no success. I've been using grub-common instead of grub. [1] https://forum.linode.com/viewtopic.php?t=8376 -- - Patrick Donnelly

2 1

Re: [arch-general] Kernel panic at boot after hard reset: not syncing. No init found.
by 施不二 06 May '13

06 May '13

I met the similar case once, chroot from a livecd and rm /tmp/* reinstall linux, reinstall syslinux(my bootloader) and syslinux-install_update -iam solved that .

1 0

Re: [arch-general] turn off notifications?
by David Benfell 06 May '13

06 May '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 05/05/2013 02:59 AM, Josh Liberty wrote: > OK, I don't remember the settings panel in cinnamon, but I know > that in GNOME there is a way to disable/customize notifications - > and in KDE obviously you have endless options to decide which (if > any) notifications you want. Now I'm feeling really stupid. Sure enough, it's there. I thought I'd turned that off. One curious note, however: Underneath what I'm taking to be global settings are settings for individual applications. Thunderbird is not listed here. So maybe thunderbird uses a separate mechanism for popping up notifications? Thanks! - -- David Benfell / benfell(a)parts-unknown.org Please see https://parts-unknown.org/node/2 for GnuPG information (or the attachment you don't understand) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRhjAvAAoJELJhbl/uPb4Sd9oP/3kpGP1Y8bGuppK5JtofdD7t Dyf9GX4zqhTiLXcFLiQoG7w+TZPKPcaNtj9MrXRBPlWN52ctyn4QZkbuaa778h5u u2BiF2pbyPCMq8zXRfwlqdYzo3SFxa+2EGivIsiLrwQaxE868NuVKMrim2cMo9Gd qwb+pZCrXBEOA30+H1fanOH5uFzEJLdT1RxFHaSkePe7A6sOnBfvT/TjA5nEFgjL 2WDgPxBfjf/ZG0xomU7CW7E+C5Dqa2gaFOvsDNi8PTbAwf0SPuAmf740OJqqWhDU 3TIas7TVRuhyBBJamwuB6iW8D++5qFoeIG3QB5YGgZprD4Z0kTKyFukhtDgHgSOg WbPH6bH+2HYGnWvjEfPFQ2vFx473yuNNhnvz8qnkJp0GmzDFBmDoflo600czRjFM lpIbhCWbFW8BENmFGpVlDVf3fF8pfXL1hlT36lL4EkWsxPifBVRcSMhig9Di/GIl zXkbmCU402Xvgr3tb9PDMYiRrz1Vk/mMcfjmjxnkngbEt1/sYmuUcTxGFjHSMVsi 7vkgMxhtj4qflQmITVGwd50fGtcuQvSlhjZNFFMlgexW3Z8juQyk/bKhvHEDIIPW lHF2x32EIVj5C+g+/1MGjM6wILuQkDpx7brpqsfTrIFAMbAs+lJmSGQxABWJ2gzo ZjodV9cUlYYGTW0onyMK =yWXx -----END PGP SIGNATURE-----

2 2

[arch-general] turn off notifications?
by David Benfell 06 May '13

06 May '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I'm failing to find where to do this. The Settings>Notifications switch does not seem to control notifications--at least under the Cinnamon desktop environment. For me, they take up a huge amount of screen real estate, all too often right where I'm trying to read something. And to be honest, I don't need them. Mostly they seem to originate from Thunderbird, but I'm assuming there are other sources as well. How can one make these go away? Thanks! -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRhH7rAAoJELJhbl/uPb4SdlwQAIfCKhINmPVRYGZpV4r/KKAi nJMFxPclmqYdGCjUC6Bjl9U3fSyPmFXToye80C4r+6i6El6qVa2wSX0V30gI+PWm IxtLyCl5B5u92j+pUjVtPLjHCwzgzAOUW5Be57W4pchMnuAzo/OPvSTm0x1kj9je DcKELgd1gUlfJHLSNFYD7L46QkTcKteDIa/NiamJYF+sK3ep9DwUsbxEguOg+8yG CAD4IsHFeI8xE6Cx9DO1lmF6twgoq7Hbr/YJhu4lrtzGdlPz80nrI/UhJN5jcUPN JosnTK3g/p5OQKJBoWixPL1GuoUVUHFCh+/08K8Y8Y5fcCdiMRTSFxsIAP+r7Paz gX/4+IlIrmYHwNs90+LOZ/m2J+qyDZElyzQ0/UIn3uin07REZBSL5ENwQQFcj9uR r4dZf7lTbnfPZYlmc6rasOjjEMtak/Ga4ZBqjuX0rcLWUITniJYP6qIVm7jOIWtY pgiWWHIRgOTc5BnSbY1zlu9jO2Maq0Y6lKz664lD50F3ksmJ+YF80VX5bZQKzjJX MB9ZeWIeL2aNHQLcH0MtHAkMkbEfJHbbUhOdaYt7rkliJASm2TD5nr0Ke/0ZQI8G bQRgGLm505WRfllSLvT03BiUF25sngSG9vOqcLzzomVkDGVQ3Gt9H9acND+PHXno TVP0JPthH9/IDQp3Cocq =D4/7 -----END PGP SIGNATURE-----

4 8

[arch-general] [netctl] service has failed
by Arch Zealot 05 May '13

05 May '13

I have successfully installed the package wireless-bcm43142-dkms package from AUR. My network controller is Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) and my wireless interface name is wlp3s0. I use wifi-menu to choose my WEP wireless network (named mywifi), i enter my password and then i get: Job for netctl(a)wlp3s0\x2dmywifi.service failed. See 'systemctl status netctl(a)wlp3s0\x2dmywifi.service' and 'journalctl -xn' for details. So, i use the above mentioned commands to find out what's happening: # systemctl status netctl(a)wlp3s0\x2dmywifi.service netctl(a)wlp3s0x2dmywifi.service - Networking for netctl profile wlp3s0x2dmywifi Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static) Active: inactive (dead) Docs: man:netctl.profile(5) # journal -nx -- Logs begin at Fri 2012-12-14 10:47:20 EET, end at Sun 2013-05-05 16:44:21 EEST. -- May 05 16:42:17 archon systemd[1]: Failed to start Networking for netctl profile wlp3s0-mywifi. -- Subject: Unit netctl(a)wlp3s0\x2dmywifi.service has failed -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba4… -- -- Unit netctl(a)wlp3s0\x2dmywifi.service has failed. -- -- The result is failed. May 05 16:42:17 archon systemd[1]: MESSAGE=Unit netctl(a)wlp3s0\x2dmywifi.service entered failed state. May 05 16:42:17 archon systemd[1]: Starting Network. -- Subject: Unit network.target has begun with start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit network.target has begun starting up. May 05 16:42:17 archon systemd[1]: Reached target Network. -- Subject: Unit network.target has finished start-up -- Defined-By: systemd -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- Unit network.target has finished starting up. -- -- The start-up result is done. I still have no clue why netctl fails to connect. The same driver works perfectly on Ubuntu 12.04 (on the same machine). dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.11-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130425 (prerelease) (GCC) ) #1 SMP PREEMPT Wed May 1 20:18:57 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b727bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b727c000-0x00000000b7281fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b7282000-0x00000000b73e5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b73e6000-0x00000000b740efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b740f000-0x00000000b746efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b746f000-0x00000000b746ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b7470000-0x00000000b74f0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b74f1000-0x00000000b770efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b770f000-0x00000000b7716fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7717000-0x00000000b771efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b771f000-0x00000000b777dfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b777e000-0x00000000b779efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b779f000-0x00000000b77e1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b77e2000-0x00000000b77fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b77ff000-0x00000000b77fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7800000-0x00000000bbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0704000-0x00000000f0704fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Dell Inc. Inspiron 1564/08CNC9, BIOS A13 03/29/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xb7800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect [ 0.000000] 1 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f7180-0x000f718f] mapped at [ffff8800000f7180] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0xb77fffff] [ 0.000000] [mem 0x00000000-0xb77fffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xb77fffff @ [mem 0x1fffc000-0x1fffffff] [ 0.000000] RAMDISK: [mem 0x37a62000-0x37d28fff] [ 0.000000] ACPI: RSDP 00000000000f70a0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000b77f4407 00074 (v01 DELL QA09 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000b77e4000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000b77e5000 0A5EF (v02 Intel CALPELLA 06040000 INTL 20060912) [ 0.000000] ACPI: FACS 00000000b779bfc0 00040 [ 0.000000] ACPI: HPET 00000000b77fec0a 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000b77fec42 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 00000000b77fec7e 00084 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000b77fed02 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SPCR 00000000b77fed2a 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) [ 0.000000] ACPI: SLIC 00000000b77fed7a 00176 (v01 DELL QA09 06040000 LTP 00000000) [ 0.000000] ACPI: OSFR 00000000b77feef0 00070 (v01 DELL DELL 06040000 ASL 00000061) [ 0.000000] ACPI: ASF! 00000000b77fef60 000A0 (v16 CETP CETP 06040000 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000b77e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b77fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb77fffff] [ 0.000000] NODE_DATA [mem 0xb77dd000-0xb77e1fff] [ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b3c00000-ffff8800b69fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009bfff] [ 0.000000] node 0: [mem 0x00100000-0xb727bfff] [ 0.000000] node 0: [mem 0xb7282000-0xb73e5fff] [ 0.000000] node 0: [mem 0xb740f000-0xb746efff] [ 0.000000] node 0: [mem 0xb770f000-0xb7716fff] [ 0.000000] node 0: [mem 0xb771f000-0xb777dfff] [ 0.000000] node 0: [mem 0xb779f000-0xb77e1fff] [ 0.000000] node 0: [mem 0xb77ff000-0xb77fffff] [ 0.000000] On node 0 totalpages: 750711 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3910 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11680 pages used for memmap [ 0.000000] DMA32 zone: 735051 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000b727c000 - 00000000b7282000 [ 0.000000] PM: Registered nosave memory: 00000000b73e6000 - 00000000b740f000 [ 0.000000] PM: Registered nosave memory: 00000000b746f000 - 00000000b7470000 [ 0.000000] PM: Registered nosave memory: 00000000b7470000 - 00000000b74f1000 [ 0.000000] PM: Registered nosave memory: 00000000b74f1000 - 00000000b770f000 [ 0.000000] PM: Registered nosave memory: 00000000b7717000 - 00000000b771f000 [ 0.000000] PM: Registered nosave memory: 00000000b777e000 - 00000000b779f000 [ 0.000000] PM: Registered nosave memory: 00000000b77e2000 - 00000000b77ff000 [ 0.000000] e820: [mem 0xbc000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7000000 s85184 r8192 d21312 u524288 [ 0.000000] pcpu-alloc: s85184 r8192 d21312 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 738961 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2940988k/3006464k available (4909k kernel code, 3620k absent, 61856k reserved, 4023k data, 820k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:4352 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 12058624 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.003333] tsc: Detected 2128.068 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.47 BogoMIPS (lpj=7093560) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000040] Security Framework initialized [ 0.000050] AppArmor: AppArmor disabled by boot time parameter [ 0.000362] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002015] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002752] Mount-cache hash table entries: 256 [ 0.002973] Initializing cgroup subsys cpuacct [ 0.002977] Initializing cgroup subsys memory [ 0.002986] Initializing cgroup subsys devices [ 0.002987] Initializing cgroup subsys freezer [ 0.002989] Initializing cgroup subsys net_cls [ 0.002991] Initializing cgroup subsys blkio [ 0.003017] CPU: Physical Processor ID: 0 [ 0.003019] CPU: Processor Core ID: 0 [ 0.003024] mce: CPU supports 9 MCE banks [ 0.003035] CPU0: Thermal monitoring handled by SMI [ 0.003043] process: using mwait in idle threads [ 0.003048] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 6 [ 0.003216] Freeing SMP alternatives: 20k freed [ 0.004401] ACPI: Core revision 20121018 [ 0.023006] ftrace: allocating 19313 entries in 76 pages [ 0.034930] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067924] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz (fam: 06, model: 25, stepping: 02) [ 0.174151] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver. [ 0.174159] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.174161] ... version: 3 [ 0.174162] ... bit width: 48 [ 0.174163] ... generic registers: 4 [ 0.174164] ... value mask: 0000ffffffffffff [ 0.174166] ... max period: 000000007fffffff [ 0.174167] ... fixed-purpose events: 3 [ 0.174168] ... event mask: 000000070000000f [ 0.221925] CPU1: Thermal monitoring handled by SMI [ 0.224099] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.242018] CPU2: Thermal monitoring handled by SMI [ 0.210886] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.262000] CPU3: Thermal monitoring handled by SMI [ 0.264125] Brought up 4 CPUs [ 0.264130] smpboot: Total of 4 processors activated (17031.90 BogoMIPS) [ 0.266752] devtmpfs: initialized [ 0.267958] PM: Registering ACPI NVS region [mem 0xb7470000-0xb74f0fff] (528384 bytes) [ 0.267971] PM: Registering ACPI NVS region [mem 0xb777e000-0xb779efff] (135168 bytes) [ 0.268878] RTC time: 16:41:13, date: 05/05/13 [ 0.268925] NET: Registered protocol family 16 [ 0.269064] ACPI: bus type pci registered [ 0.269147] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.269150] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.299110] PCI: Using configuration type 1 for base access [ 0.299702] bio: create slab <bio-0> at 0 [ 0.299769] ACPI: Added _OSI(Module Device) [ 0.299772] ACPI: Added _OSI(Processor Device) [ 0.299773] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.299775] ACPI: Added _OSI(Processor Aggregator Device) [ 0.301170] ACPI: EC: Look up EC in DSDT [ 0.306433] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.307222] ACPI: SSDT 00000000b771ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.307566] ACPI: Dynamic OEM Table Load: [ 0.307569] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.307721] ACPI: SSDT 00000000b7718018 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.308036] ACPI: Dynamic OEM Table Load: [ 0.308038] ACPI: SSDT (null) 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.317640] ACPI: SSDT 00000000b7719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.318019] ACPI: Dynamic OEM Table Load: [ 0.318021] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.318150] ACPI: SSDT 00000000b7717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.318493] ACPI: Dynamic OEM Table Load: [ 0.318495] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.319137] ACPI: Interpreter enabled [ 0.319142] ACPI: (supports S0 S3 S4 S5) [ 0.319162] ACPI: Using IOAPIC for interrupt routing [ 0.319579] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.324774] ACPI: Power Resource [FN00] (off) [ 0.324857] ACPI: Power Resource [FN01] (off) [ 0.325184] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.325402] ACPI: No dock devices found. [ 0.325406] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.325780] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.325783] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.325955] \_SB_.PCI0:_OSC invalid UUID [ 0.325957] _OSC request data:1 8 1f [ 0.326628] PCI host bridge to bus 0000:00 [ 0.326632] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.326634] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.326636] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.326638] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.326640] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.326642] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.326644] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.326646] pci_bus 0000:00: root bus resource [mem 0xbc000000-0xdfffffff] [ 0.326648] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.326658] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000 [ 0.326678] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics [ 0.326701] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000 [ 0.326713] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.326720] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.326725] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.326794] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 [ 0.326824] pci 0000:00:16.0: reg 10: [mem 0xf0705800-0xf070580f 64bit] [ 0.326924] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.326970] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 [ 0.326995] pci 0000:00:1a.0: reg 10: [mem 0xf0706000-0xf07063ff] [ 0.327108] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.327143] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.327165] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.327264] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.327296] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.327404] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.327436] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.327539] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.327576] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400 [ 0.327678] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.327721] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 [ 0.327747] pci 0000:00:1d.0: reg 10: [mem 0xf0706400-0xf07067ff] [ 0.327860] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.327888] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.327978] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100 [ 0.328111] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601 [ 0.328138] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f] [ 0.328150] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f] [ 0.328161] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817] [ 0.328173] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b] [ 0.328185] pci 0000:00:1f.2: reg 20: [io 0x1820-0x183f] [ 0.328196] pci 0000:00:1f.2: reg 24: [mem 0xf0705000-0xf07057ff] [ 0.328266] pci 0000:00:1f.2: PME# supported from D3hot [ 0.328293] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.328314] pci 0000:00:1f.3: reg 10: [mem 0xf0706800-0xf07068ff 64bit] [ 0.328345] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f] [ 0.328397] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000 [ 0.328426] pci 0000:00:1f.6: reg 10: [mem 0xf0704000-0xf0704fff 64bit] [ 0.328585] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.329286] pci 0000:03:00.0: [14e4:4315] type 00 class 0x028000 [ 0.329922] pci 0000:03:00.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit] [ 0.333549] pci 0000:03:00.0: supports D1 D2 [ 0.333551] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.335038] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.335047] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff] [ 0.335129] pci 0000:04:00.0: [10ec:8136] type 00 class 0x020000 [ 0.335146] pci 0000:04:00.0: reg 10: [io 0x2000-0x20ff] [ 0.335174] pci 0000:04:00.0: reg 18: [mem 0xf0810000-0xf0810fff 64bit pref] [ 0.335193] pci 0000:04:00.0: reg 20: [mem 0xf0800000-0xf080ffff 64bit pref] [ 0.335207] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.335274] pci 0000:04:00.0: supports D1 D2 [ 0.335276] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.344085] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 0.344095] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.344112] pci 0000:00:1c.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref] [ 0.344201] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.344214] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.344216] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.344218] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.344220] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.344222] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.344224] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.344226] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xdfffffff] (subtractive decode) [ 0.344228] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.344265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.344371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.344421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.344471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.344546] \_SB_.PCI0:_OSC invalid UUID [ 0.344547] _OSC request data:1 1f 1f [ 0.344551] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.344553] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.345251] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) [ 0.345316] PCI host bridge to bus 0000:ff [ 0.345319] pci_bus 0000:ff: root bus resource [bus ff] [ 0.345324] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000 [ 0.345345] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000 [ 0.345367] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000 [ 0.345387] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000 [ 0.345406] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000 [ 0.345425] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000 [ 0.345459] pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.345461] pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.345647] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.345694] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.345738] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.345782] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.345827] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.345871] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.345916] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.345961] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.346054] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.346058] vgaarb: loaded [ 0.346059] vgaarb: bridge control possible 0000:00:02.0 [ 0.346100] PCI: Using ACPI for IRQ routing [ 0.356062] PCI: pci_cache_line_size set to 64 bytes [ 0.356180] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff] [ 0.356182] e820: reserve RAM buffer [mem 0xb727c000-0xb7ffffff] [ 0.356185] e820: reserve RAM buffer [mem 0xb73e6000-0xb7ffffff] [ 0.356187] e820: reserve RAM buffer [mem 0xb746f000-0xb7ffffff] [ 0.356189] e820: reserve RAM buffer [mem 0xb7717000-0xb7ffffff] [ 0.356191] e820: reserve RAM buffer [mem 0xb777e000-0xb7ffffff] [ 0.356193] e820: reserve RAM buffer [mem 0xb77e2000-0xb7ffffff] [ 0.356194] e820: reserve RAM buffer [mem 0xb7800000-0xb7ffffff] [ 0.356298] NetLabel: Initializing [ 0.356300] NetLabel: domain hash size = 128 [ 0.356301] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.356317] NetLabel: unlabeled traffic allowed by default [ 0.356337] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.356343] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.358358] Switching to clocksource hpet [ 0.363541] pnp: PnP ACPI init [ 0.363562] ACPI: bus type pnp registered [ 0.363672] pnp 00:00: [dma 4] [ 0.363704] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.363729] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.363843] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.363878] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.363942] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.363945] system 00:04: [io 0x0500-0x050f] has been reserved [ 0.363947] system 00:04: [io 0x0600-0x0603] has been reserved [ 0.363949] system 00:04: [io 0xffff] has been reserved [ 0.363952] system 00:04: [io 0x0400-0x047f] has been reserved [ 0.363954] system 00:04: [io 0x1180-0x11ff] has been reserved [ 0.363956] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.363958] system 00:04: [io 0xfe00] has been reserved [ 0.363961] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.364009] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.364043] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.364071] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.364361] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.364364] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.364366] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.364368] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.364370] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.364373] system 00:08: [mem 0xfeaff000-0xfeafffff] has been reserved [ 0.364375] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.364377] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.364379] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.364382] system 00:08: [mem 0xff000000-0xffffffff] has been reserved [ 0.364384] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.364387] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365122] pnp: PnP ACPI: found 9 devices [ 0.365125] ACPI: ACPI bus type pnp unregistered [ 0.371932] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.371936] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.371939] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.371951] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.371954] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.371966] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 04] add_size 400000 [ 0.371982] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.371985] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.371987] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.371989] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000 [ 0.371991] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.371993] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.371999] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc000000-0xbc1fffff] [ 0.372002] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbc200000-0xbc3fffff 64bit pref] [ 0.372005] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbc400000-0xbc5fffff 64bit pref] [ 0.372008] pci 0000:00:1c.5: BAR 14: assigned [mem 0xbc600000-0xbcafffff] [ 0.372011] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.372014] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff] [ 0.372017] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.372022] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.372028] pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbc1fffff] [ 0.372034] pci 0000:00:1c.0: bridge window [mem 0xbc200000-0xbc3fffff 64bit pref] [ 0.372042] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.372045] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.372052] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff] [ 0.372057] pci 0000:00:1c.1: bridge window [mem 0xbc400000-0xbc5fffff 64bit pref] [ 0.372066] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0820000-0xf083ffff pref] [ 0.372068] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 0.372072] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.372078] pci 0000:00:1c.5: bridge window [mem 0xbc600000-0xbcafffff] [ 0.372084] pci 0000:00:1c.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref] [ 0.372091] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.372143] pci 0000:00:1e.0: setting latency timer to 64 [ 0.372148] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.372150] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.372152] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.372154] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.372155] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.372157] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.372159] pci_bus 0000:00: resource 10 [mem 0xbc000000-0xdfffffff] [ 0.372161] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.372164] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.372165] pci_bus 0000:02: resource 1 [mem 0xbc000000-0xbc1fffff] [ 0.372168] pci_bus 0000:02: resource 2 [mem 0xbc200000-0xbc3fffff 64bit pref] [ 0.372170] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.372172] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.372174] pci_bus 0000:03: resource 2 [mem 0xbc400000-0xbc5fffff 64bit pref] [ 0.372176] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.372178] pci_bus 0000:04: resource 1 [mem 0xbc600000-0xbcafffff] [ 0.372180] pci_bus 0000:04: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref] [ 0.372182] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.372184] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.372186] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.372188] pci_bus 0000:05: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.372190] pci_bus 0000:05: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.372191] pci_bus 0000:05: resource 9 [mem 0x000dc000-0x000dffff] [ 0.372193] pci_bus 0000:05: resource 10 [mem 0xbc000000-0xdfffffff] [ 0.372195] pci_bus 0000:05: resource 11 [mem 0xf0000000-0xfebfffff] [ 0.372238] NET: Registered protocol family 2 [ 0.372422] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.372660] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.372862] TCP: Hash tables configured (established 32768 bind 32768) [ 0.372901] TCP: reno registered [ 0.372909] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.372948] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.373037] NET: Registered protocol family 1 [ 0.373051] pci 0000:00:02.0: Boot video device [ 0.373238] PCI: CLS 64 bytes, default 64 [ 0.373286] Unpacking initramfs... [ 0.433757] Freeing initrd memory: 2844k freed [ 0.434392] Simple Boot Flag at 0x36 set to 0x1 [ 0.434814] audit: initializing netlink socket (disabled) [ 0.434829] type=2000 audit(1367772072.316:1): initialized [ 0.448759] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.450419] VFS: Disk quotas dquot_6.5.2 [ 0.450465] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.450659] msgmni has been set to 5749 [ 0.450966] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.451009] io scheduler noop registered [ 0.451011] io scheduler deadline registered [ 0.451017] io scheduler cfq registered (default) [ 0.451335] intel_idle: MWAIT substates: 0x1120 [ 0.451338] intel_idle: v0.4 model 0x25 [ 0.451339] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.451400] GHES: HEST is not enabled! [ 0.451465] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.452012] Linux agpgart interface v0.103 [ 0.452083] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.458120] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.458135] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.458309] mousedev: PS/2 mouse device common for all mice [ 0.458362] rtc_cmos 00:05: RTC can wake from S4 [ 0.458516] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.458549] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.458627] cpuidle: using governor ladder [ 0.458744] cpuidle: using governor menu [ 0.458746] EFI Variables Facility v0.08 2004-May-17 [ 0.458796] drop_monitor: Initializing network drop monitor service [ 0.458878] TCP: cubic registered [ 0.458975] NET: Registered protocol family 10 [ 0.459146] NET: Registered protocol family 17 [ 0.459157] Key type dns_resolver registered [ 0.459521] PM: Hibernation image not present or could not be loaded. [ 0.459530] registered taskstats version 1 [ 0.460856] Magic number: 13:198:691 [ 0.461001] rtc_cmos 00:05: setting system clock to 2013-05-05 16:41:13 UTC (1367772073) [ 0.462871] Freeing unused kernel memory: 820k freed [ 0.463020] Write protecting the kernel read-only data: 8192k [ 0.463350] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.466825] Freeing unused kernel memory: 1224k freed [ 0.468732] Freeing unused kernel memory: 440k freed [ 0.482950] systemd-udevd[56]: starting version 202 [ 0.509594] SCSI subsystem initialized [ 0.510852] ACPI: bus type scsi registered [ 0.510950] libata version 3.00 loaded. [ 0.511191] ACPI: bus type usb registered [ 0.511232] usbcore: registered new interface driver usbfs [ 0.511248] usbcore: registered new interface driver hub [ 0.511301] usbcore: registered new device driver usb [ 0.511931] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.512214] ahci 0000:00:1f.2: version 3.0 [ 0.512308] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 0.512368] ahci: SSS flag set, parallel bus scan disabled [ 0.512372] ehci-pci: EHCI PCI platform driver [ 0.512409] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 0.512415] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 0.512422] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.519062] scsi0 : ahci [ 0.519523] scsi1 : ahci [ 0.519638] scsi2 : ahci [ 0.519844] scsi3 : ahci [ 0.519933] ata1: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705100 irq 40 [ 0.519938] ata2: SATA max UDMA/133 abar m2048@0xf0705000 port 0xf0705180 irq 40 [ 0.519940] ata3: DUMMY [ 0.519941] ata4: DUMMY [ 0.520008] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.520015] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.520025] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.520048] ehci-pci 0000:00:1a.0: debug port 2 [ 0.524060] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.524082] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0706000 [ 0.531701] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.531990] hub 1-0:1.0: USB hub found [ 0.531995] hub 1-0:1.0: 3 ports detected [ 0.532151] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.532156] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.532162] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.532177] ehci-pci 0000:00:1d.0: debug port 2 [ 0.536214] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.536241] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0706400 [ 0.544994] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.545418] hub 2-0:1.0: USB hub found [ 0.545422] hub 2-0:1.0: 3 ports detected [ 0.838270] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.841619] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.843572] ata1.00: ATA-8: WDC WD5000BEVT-75A0RT0, 01.01A01, max UDMA/133 [ 0.843577] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.845688] ata1.00: configured for UDMA/133 [ 0.845913] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-7 01.0 PQ: 0 ANSI: 5 [ 0.962165] hub 1-1:1.0: USB hub found [ 0.962379] hub 1-1:1.0: 6 ports detected [ 1.068215] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.164802] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.183662] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, DW50, max UDMA/100 [ 1.183667] ata2.00: applying bridge limits [ 1.192206] hub 2-1:1.0: USB hub found [ 1.192402] hub 2-1:1.0: 8 ports detected [ 1.204388] ata2.00: configured for UDMA/100 [ 1.209525] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C DW50 PQ: 0 ANSI: 5 [ 1.213557] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.213627] sd 0:0:0:0: [sda] Write Protect is off [ 1.213631] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.213667] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.219266] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.219272] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.219739] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.271578] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 1.306771] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 1.307923] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.434665] tsc: Refined TSC clocksource calibration: 2128.003 MHz [ 1.434676] Switching to clocksource tsc [ 3.546338] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 4.596571] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time. [ 4.660171] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 4.681141] systemd[1]: Set hostname to <archon>. [ 5.472592] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details. [ 5.473027] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 5.473132] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.473159] systemd[1]: Starting Remote File Systems. [ 5.473580] systemd[1]: Reached target Remote File Systems. [ 5.473603] systemd[1]: Starting Delayed Shutdown Socket. [ 5.474029] systemd[1]: Listening on Delayed Shutdown Socket. [ 5.474051] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 5.474461] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.474483] systemd[1]: Starting Device-mapper event daemon FIFOs. [ 5.474900] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 5.474921] systemd[1]: Starting LVM2 metadata daemon socket. [ 5.475343] systemd[1]: Listening on LVM2 metadata daemon socket. [ 5.475376] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 5.475460] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.475480] systemd[1]: Starting Paths. [ 5.475858] systemd[1]: Reached target Paths. [ 5.475923] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 5.476576] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.476717] systemd[1]: Starting udev Kernel Socket. [ 5.477129] systemd[1]: Listening on udev Kernel Socket. [ 5.477251] systemd[1]: Starting udev Control Socket. [ 5.477668] systemd[1]: Listening on udev Control Socket. [ 5.477691] systemd[1]: Starting Encrypted Volumes. [ 5.478068] systemd[1]: Reached target Encrypted Volumes. [ 5.478091] systemd[1]: Starting Journal Socket. [ 5.478581] systemd[1]: Listening on Journal Socket. [ 5.498444] systemd[1]: Started Set Up Additional Binary Formats. [ 5.507479] systemd[1]: Starting Apply Kernel Variables... [ 5.519967] systemd[1]: Mounting Huge Pages File System... [ 5.557876] systemd[1]: Started Load Kernel Modules. [ 5.557905] systemd[1]: Mounting POSIX Message Queue File System... [ 5.566562] systemd[1]: Mounting Debug File System... [ 5.579830] systemd[1]: Starting Setup Virtual Console... [ 5.593090] systemd[1]: Mounting Configuration File System... [ 5.606537] systemd[1]: Starting udev Coldplug all Devices... [ 5.612652] systemd[1]: Starting Journal Service... [ 5.620177] systemd[1]: Started Journal Service. [ 5.620339] systemd[1]: Starting Create static device nodes in /dev... [ 5.629737] systemd[1]: Mounted FUSE Control File System. [ 5.629759] systemd[1]: Starting Swap. [ 5.630096] systemd[1]: Reached target Swap. [ 5.630123] systemd[1]: Started File System Check on Root Device. [ 5.630141] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.633333] systemd[1]: Mounting Temporary Directory... [ 5.656360] systemd[1]: Expecting device dev-disk-by\x2duuid-e0b3d89f\x2d9bc7\x2d4cfa\x2da484\x2d17c2b9f7f00c.device... [ 5.658311] systemd[1]: Started Apply Kernel Variables. [ 6.220236] EXT4-fs (sda8): re-mounted. Opts: data=ordered [ 6.395992] systemd-udevd[130]: starting version 202 [ 7.108171] ACPI: Requesting acpi_cpufreq [ 7.177265] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 7.177273] ACPI: Power Button [PWRB] [ 7.177322] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 7.177325] ACPI: Sleep Button [SLPB] [ 7.177371] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 7.177961] ACPI: Lid Switch [LID0] [ 7.178014] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 7.178017] ACPI: Power Button [PWRF] [ 7.297487] ACPI: Fan [FAN0] (off) [ 7.297536] ACPI: Fan [FAN1] (off) [ 7.329853] thermal LNXTHERM:00: registered as thermal_zone0 [ 7.329856] ACPI: Thermal Zone [TZ00] (27 C) [ 7.330183] thermal LNXTHERM:01: registered as thermal_zone1 [ 7.330185] ACPI: Thermal Zone [TZ01] (0 C) [ 7.378942] ACPI: AC Adapter [ADP1] (on-line) [ 7.379250] wmi: Mapper loaded [ 7.379855] ACPI: Battery Slot [BAT0] (battery absent) [ 7.412836] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 7.454401] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9 [ 7.669645] cfg80211: Calling CRDA to update world regulatory domain [ 7.725453] lib80211: common routines for IEEE802.11 drivers [ 7.725457] lib80211_crypt: registered algorithm 'NULL' [ 7.748475] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251) [ 7.748483] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.748488] ACPI Warning: 0x00000000000011c0-0x00000000000011cf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 7.748491] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.748493] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 7.748497] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.748498] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251) [ 7.748502] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.748503] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 7.798019] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 7.798078] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads [ 7.798198] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 [ 7.812929] mei 0000:00:16.0: setting latency timer to 64 [ 7.812997] mei 0000:00:16.0: irq 41 for MSI/MSI-X [ 7.817351] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset [ 7.817454] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 7.818279] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 7.818478] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 7.877555] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 7.878439] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 7.934211] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.934438] r8169 0000:04:00.0: irq 42 for MSI/MSI-X [ 7.934686] r8169 0000:04:00.0 eth0: RTL8102e at 0xffffc9000067e000, b8:ac:6f:50:88:8b, XID 04e00000 IRQ 42 [ 7.942635] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9 [ 8.084741] input: Dell WMI hotkeys as /devices/virtual/input/input6 [ 8.085689] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9 [ 8.087337] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9 [ 8.087885] microcode: Microcode Update Driver: v2.00 <tigran(a)aivazian.fsnet.co.uk>, Peter Oruba [ 8.090784] [drm] Initialized drm 1.1.0 20060810 [ 8.112241] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251) [ 8.112249] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.114423] iTCO_vendor_support: vendor-support=0 [ 8.148893] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 8.148934] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460) [ 8.149220] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.329187] media: Linux media interface: v0.10 [ 8.415334] systemd-udevd[143]: renamed network interface eth0 to enp4s0 [ 8.474931] i915 0000:00:02.0: setting latency timer to 64 [ 8.511033] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 8.511044] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.511046] [drm] Driver supports precise vblank timestamp query. [ 8.511098] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.650340] INFO @wl_cfg80211_attach : Registered CFG80211 phy [ 8.706375] fbcon: inteldrmfb (fb0) is primary device [ 8.743158] Linux video capture interface: v2.00 [ 8.775277] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:641d) [ 8.816479] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7 [ 8.816645] usbcore: registered new interface driver uvcvideo [ 8.816646] USB Video Class driver (1.1.1) [ 8.832693] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8 [ 8.851023] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 8.913505] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 8.982999] lib80211_crypt: registered algorithm 'TKIP' [ 8.983523] eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.20.155.1 (r326264) [ 9.071589] systemd-udevd[147]: renamed network interface eth0 to wlp3s0 [ 9.449862] Console: switching to colour frame buffer device 170x48 [ 9.453596] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 9.453598] i915 0000:00:02.0: registered panic notifier [ 9.453613] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 9.458659] acpi device:01: registered as cooling_device6 [ 9.458874] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 9.458997] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 9.459171] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 9.459364] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 9.508817] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 10.448112] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 10.448227] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 10.448301] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 12.750173] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 12.993310] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo [ 14.620901] systemd-logind[213]: Watching system buttons on /dev/input/event1 (Power Button) [ 14.620981] systemd-logind[213]: Watching system buttons on /dev/input/event3 (Lid Switch) [ 14.621061] systemd-logind[213]: Watching system buttons on /dev/input/event2 (Sleep Button) [ 33.874221] EXT4-fs (sda8): re-mounted. Opts: data=ordered,commit=0 [ 33.880227] EXT4-fs (sda7): re-mounted. Opts: commit=0

1 0

Re: [arch-general] turn off notifications?
by David Benfell 05 May '13

05 May '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 05/05/2013 01:09 AM, Josh Liberty wrote: > I think you're going about this entirely the wrong way. Which > desktop environment are you using? > Cinnamon. Sometimes Gnome, but mostly Cinnamon. Thanks! - -- David Benfell / benfell(a)parts-unknown.org Please see https://parts-unknown.org/node/2 for GnuPG information (or the attachment you don't understand) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRhiACAAoJELJhbl/uPb4S+D8P/i+nAjpzSzc0TE4yU1sQadOg tc+5CkdjRSJ70vbRpT7CPIRJZPAyvnrHDM48mKtfXbraNuiQEMR2BB9Ad4GVslun lDZx4HRu27JvcOVpKAs07tGBRup5kSELXIjVhZCjFs2zrnDlddMijpdsCtlDS02m 3e/qlrPM9X9Cx/f3MHmhfyuICSbCAArbhk5HmeRBQKnm9Uj9ZchMeXAO9wwehbwU rKTcaw4uiz6uoczhHtpkUKpEYSY3tb9DX5+DNOKVmZcLEVhlK+BG6eOLE5OQjQDo UtS/1948ZK9cxyTfQuo2W0k1VBBhoR31NDYWCv5t0GeNTPZInm0/dTk30lGcAOKf mkwAKvSNZW9Of/MYT+RlLE2jiMDtTtFaZJnSn96EIJQp+Qtb/67Pu5Z/iHk1sIKI GgU4iguVDTyWuI9qLEyW84qArFd4CUpFtEU/i1wj3zsLta0UMooIZtfAO6vjbh9x PC9vaDNa/kclLfW+MUgsAUngLX4zrVmlSwBZBCo9LzQqyVBTjpRCHFPEXT55Rw8G hr2gqDGksrsqqKrfzHVddzIFLFf+Ddt2n4A0sUGXBGRtMteB9vXJ+Z8CHk4Ozzph DqvfMh7t4AexiNjGocpLDIWbefmfp6fKW1VSQh/YtblgnptlX0dV36pj1k24h2HQ eo2otuE5psWH93+mGcGE =6a6s -----END PGP SIGNATURE-----

1 0

[arch-general] Wrong bug report mentioned in pacman 4.1 news
by Karol Blazewicz 04 May '13

04 May '13

https://projects.archlinux.org/pacman.git/tree/NEWS#n21 display repo in VerbosePkgLists output (FS#26334) https://bugs.archlinux.org/task/26334 talks about something else. Bug report number is IMHO wrong, but I don't know which one should it be. VerbosePkgLists shows repo for some time, but it used to show it in a different way https://bugs.archlinux.org/task/13364

1 0

[arch-general] [signoff] linux-3.8.11-1
by Tobias Powalowski 03 May '13

03 May '13

Hi guys, please signoff 3.8.11 series for both arches. package is not in testing, please grab it from here: http://dev.archlinux.org/~tpowa/linux/ This will move to [core] directly, because 3.9.0 is in [testing]. greetings tpowa -- Tobias Powalowski Archlinux Developer & Package Maintainer (tpowa) http://www.archlinux.org tpowa(a)archlinux.org

4 3

[arch-general] NetworkManager from Commandline
by Alex Sla 03 May '13

03 May '13

Hi guys, I'm moving from KDE to Fluxbox, I want to keep using the NetworkManger. I have configured a lots of connection in it(WiFi / Cisco VPN for example). But I can't access my secrets to it. nmcli con up uuid 7f29abd0-c0d5-4e55-8796 Error: Connection activation failed: no valid VPN secrets. I guess, I saved them in the keyring file, how can I get access from the cli? Is there maybe another tool to mange the connection or getting access to the KDE Keyring file?

4 3

[arch-general] What is the policy regarding the urgency of fixes ?
by Pavan Yalamanchili 02 May '13

02 May '13

For example, the following commit fixes a bug https://projects.archlinux.org/svntogit/community.git/commit/trunk?h=packag… But that change would require a 400+ MB to be downloaded when doing a pacman -Syu. The next version of CUDA is probably around the corner. I feel a fix then would have been easier. I am not complaining, I can just do --ignore for now. I am just curios to know if this kind of stuff is thought about. -- Pavan

3 3

[arch-general] 3.8.6 kernel compile fails with gcc 4.8
by Damjan 01 May '13

01 May '13

For various reasons I'm compiling my own kernels, but just now I have got this error while trying to update and compile 3.8.6. gcc is 4.8.0-1 arch is i686 How do I get "preprocessed source"? CC [M] drivers/net/ethernet/intel/e1000e/netdev.o drivers/net/ethernet/intel/e1000e/netdev.c: In function ‘e1000_xmit_frame’: drivers/net/ethernet/intel/e1000e/netdev.c:5159:1: internal compiler error: Maximum number of LRA constraint passes is achieved (30) } ^ Please submit a full bug report, with preprocessed source if appropriate. See <https://bugs.archlinux.org/> for instructions. make[5]: *** [drivers/net/ethernet/intel/e1000e/netdev.o] Error 1 make[4]: *** [drivers/net/ethernet/intel/e1000e] Error 2 -- дамјан

6 10

[arch-general] Errors while upgrading ghc and haskell packages
by Alexandre Ferrando 01 May '13

01 May '13

Total newbie on haskell packages here. While upgrading to the last version of ghc and related haskell packages from testing, I've seen the following errors in the pacman log [2013-04-26 09:54] [PACMAN] upgraded ghc (7.6.2-1 -> 7.6.3-1) [2013-04-26 09:54] [ALPM-SCRIPTLET] ghc-pkg: cannot find package text-0.11.2.3 [2013-04-26 09:54] [ALPM-SCRIPTLET] Reading package info from stdin ... done. [2013-04-26 09:54] [PACMAN] upgraded haskell-text (0.11.2.3-2 -> 0.11.2.3-3) [2013-04-26 09:54] [ALPM-SCRIPTLET] ghc-pkg: cannot find package transformers-0.3.0.0 [2013-04-26 09:54] [ALPM-SCRIPTLET] Reading package info from stdin ... done. [2013-04-26 09:54] [PACMAN] upgraded haskell-transformers (0.3.0.0-3 -> 0.3.0.0-4) [2013-04-26 09:54] [ALPM-SCRIPTLET] ghc-pkg: cannot find package mtl-2.1.2 [2013-04-26 09:54] [ALPM-SCRIPTLET] Reading package info from stdin ... done. [2013-04-26 09:54] [PACMAN] upgraded haskell-mtl (2.1.2-2 -> 2.1.2-3) [2013-04-26 09:54] [ALPM-SCRIPTLET] ghc-pkg: cannot find package syb-0.4.0 [2013-04-26 09:54] [ALPM-SCRIPTLET] Reading package info from stdin ... done. [2013-04-26 09:54] [PACMAN] upgraded haskell-syb (0.4.0-1 -> 0.4.0-2) [2013-04-26 09:54] [ALPM-SCRIPTLET] ghc-pkg: cannot find package json-0.7 [2013-04-26 09:54] [ALPM-SCRIPTLET] Reading package info from stdin ... done. [2013-04-26 09:54] [PACMAN] upgraded haskell-json (0.7-4 -> 0.7-5) [2013-04-26 09:54] [ALPM-SCRIPTLET] ghc-pkg: cannot find package parsec-3.1.3 [2013-04-26 09:54] [ALPM-SCRIPTLET] Reading package info from stdin ... done. [2013-04-26 09:54] [PACMAN] upgraded haskell-parsec (3.1.3-2 -> 3.1.3-3) [2013-04-26 09:54] [ALPM-SCRIPTLET] ghc-pkg: cannot find package regex-base-0.93.2 [2013-04-26 09:54] [ALPM-SCRIPTLET] Reading package info from stdin ... done. [2013-04-26 09:54] [PACMAN] upgraded haskell-regex-base (0.93.2-12 -> 0.93.2-13) Is it safe to ignore those "cannot find package X" or is there something that must be done?

2 1

[arch-general] NetworkManager: Issues with symbol when connected via WiFi
by Karol Babioch 30 Apr '13

30 Apr '13

Hi, since a couple of weeks I've got an issue with NetworkManager. Although I'm definitely connected via WiFi and can access my network and/or the Internet, the symbol from the nm-applet indicates that it is still trying to connect. I guess most of you are familiar with the symbol itself. Nevertheless I'm attaching it in case you don't know what I'm talking about. This issue doesn't occur every time I'm connecting to a wireless network, and unfortunately it can't be fixed by restarting NetworkManager. Usually I have to restart the whole system to get rid of this problem. The log of NetworkManager doesn't reveal anything strange, so I'm not sure whats the issue here. I know at least of one friend of mine who has the same problem, so there seems to be going on something odd. Is anyone of you experiencing the same kind of issue and/or knows about a way to fix it? Looking at the NetworkManager bug tracker I couldn't find any open issues regarding this :(. Best regards, Karol Babioch

2 2

[arch-general] zsh-history-substring-search with grml-zsh-config
by Oon-Ee Ng 29 Apr '13

29 Apr '13

I use grml-zsh-config and after a recent update zsh-history-substring-search seems to have stopped working (up and down no longer search for the substring). Anyone with the same experience, or an a alternative? I really don't grok zsh =(

3 4

[arch-general] ntp-signd support for Samba4
by John Lane 25 Apr '13

25 Apr '13

Now that Samba 4 is the deault, I think the ntp package needs to be configured with '--enable-ntp-signd' because this is needed for Active Directory clients to be able to synchronize time via the Active Directory component of Samba 4. As far as I know this is necessary but the wiki makes no mention of it so I may of course be wrong.... Does anybody else know more about this?

2 1

[arch-general] Integrating Virus Scanning for Packages Handled by Pacman
by Mark E. Lee 25 Apr '13

25 Apr '13

While building packages on the AUR, I was wondering that except for manual user intervention (by reading the code), I didn't have any other methods of knowing if a package had malware or viruses. Hence, I was wondering if virus scanning via clamav should be called before pacman installs packages. -- Mark E. Lee <mark(a)markelee.com>

5 4

Re: [arch-general] Integrating Virus Scanning for Packages Handled by Pacman (Mark Lee)
by Mark E. Lee 24 Apr '13

24 Apr '13

On Wed, 2013-04-24 at 12:57 -0400, arch-general-request(a)archlinux.org wrote: > On Tuesday, April 23, 2013 06:56:56 PM Daniel Micay wrote: > > On Tue, Apr 23, 2013 at 1:10 PM, Mark E. Lee <mark(a)markelee.com> > wrote: > > > While building packages on the AUR, I was wondering that except > for > > > manual user intervention (by reading the code), I didn't have any > other > > > methods of knowing if a package had malware or viruses. Hence, I > was > > > wondering if virus scanning via clamav should be called before > pacman > > > installs packages. > > > > > > -- > > > Mark E. Lee <mark(a)markelee.com> > > > > The PKGBUILD itself is a bash script. If you're running them without > > reading the code and checking that the sources are from an upstream > > you trust, you're gonna have a bad time. > > > > There are plenty of packages in the AUR that touch outside of > $pkgdir > > - but most seem to be beginner mistakes in good faith. ClamAV pretty > > much just detects very common win32 viruses, because it's used on > mail > > servers to *reduce* the number of spread viruses. > > > > If you really feel like scanning the package contents after you've > > already trusted the PKGBUILD and build scripts, just don't use > makepkg > > -i. > > I'd have to agree here, I don't feel much as if it is the duty of the > package > manager to check for viruses. Furthermore, reinforcing what Daniel > said, > ClamAV's primary function is to mitigate the spreading of Windows > malware. > While it would be nice to have some system to screen PKGBUILDs for > malicious > activity, it is just out of scope. [core], [extra], [multilib], and > [community] are for the most part screened upon submission (You can't > just > throw a package right upstream and into [community] without having > someone > view it first, thus having an opportunity to spot bad scripts) and the > AUR is > fairly trustworthy in and of itself. It really is just a matter of > trust. > As seen by some malignant Android apps, trust in the developer/maintainer does not always work towards the goals of the end users. Packages downloaded from the main repos or built from the AUR should be scanned for both windows and linux malware to ensure Arch Linux pc's don't become carriers for malware. Pacman would benefit from an additional line of package scanning (not just verifying); it's sort of like a second opinion from another doctor. From, Mark -- Mark E. Lee <mark(a)markelee.com>

5 4

[arch-general] Gnome 3.8 and desktop background
by Magnus Therning 24 Apr '13

24 Apr '13

Gnome 3.8 has now hit the official repos and it looks great. They only thing I can't seem to get to work is the desktop background. I try to set it to a nice image I have, but my desktop background remains a dull grey. The only place I see a change is in window overview mode. The only way to get the background on my ordinary desktop is to turn off "Have file manager handle the desktop" in Tweak Tool, but then I lose the icons from my desktop. Please tell me I'm not forced to chose the lesser of these evils and that there is something I've missed ;) /M -- Magnus Therning OpenPGP: 0xAB4DFBA4 email: magnus(a)therning.org jabber: magnus(a)therning.org twitter: magthe http://therning.org/magnus

7 9

Re: [arch-general] [aur-general] Failure to boot after update yesterday evening (CET)
by Magnus Therning 23 Apr '13

23 Apr '13

On Tue, Apr 23, 2013 at 11:59 AM, Magnus Therning <magnus(a)therning.org> wrote: > On Tue, Apr 23, 2013 at 11:13 AM, Tianyi Wang <wty52133(a)gmail.com> wrote: >> There are many bug reports about this issue on https://bugs.archlinux.org >> >> Tbh, before GNOME 3.8 got moved to stable repo, someone posted this bug on >> the mailing list, but it still got moved to stable without any warnings on >> the website. > > Hmm, the one JoKoT3 mentions, > https://bbs.archlinux.org/viewtopic.php?id=161964, doesn't sound like > my issue at all. As I've mentioned a few times now, my system hangs > before I get to GDM. The last thing that appears on the terminal are > a few messages from systemd (nothing about any errors) and then > everything just freezes, no reaction to any key presses at all. It turns out it was the GDM issue. I've now installed and turned on slim, edited my ~/.xinitrc, turned off GDM temporarily, and now everything works fine again. Thanks for all the help! /M -- Magnus Therning OpenPGP: 0xAB4DFBA4 email: magnus(a)therning.org jabber: magnus(a)therning.org twitter: magthe http://therning.org/magnus

1 0

[arch-general] journalctl equivalent for /var/log/kernel.log
by Paul Gideon Dann 23 Apr '13

23 Apr '13

Hello all, This should have been easy to find, but I haven't had any luck. What's the systemd equivalent to "tail -f /var/log/kernel.log"? I'm trying to slowly start using journalctl instead of syslog... Paul

2 2

Re: [arch-general] XFCE broken with Gnome 3.8?
by Pedro Alejandro López-Valencia 23 Apr '13

23 Apr '13

On Tue, Apr 23, 2013 at 12:01 AM, David Rosenstrauch <darose(a)darose.net>wrote: > > Apparently when I whack my XFCE session cache file > (~/.cache/sessions/xfce4-**session-daroselin:0) the problem goes away and > I can start up XFCE no problem. But as soon as I save the session, > creating a new session cache file, XFCE starts to crap out at startup. > > Instead of saving a session, use the XDG autostart directory ($HOME/.config/ autostart). Copy the .desktop files from /usr/share/applications, log out and log in again. That should work better. -- Only my skepticism keeps me from being an atheist. —Voltaire http://about.me/palopezv

1 0

[arch-general] XFCE broken with Gnome 3.8?
by David Rosenstrauch 23 Apr '13

23 Apr '13

I picked up some Gnome package upgrades last night during a pacman update, and I haven't been able to log into XFCE ever since. It gets most of the way through the login process, then craps out and falls back to the session manager (LXDM). I'm not even able to see any debug information about what's going on. Anyone have a clue / pointer to a fix / workaround? Thanks, DR

7 9

[arch-general] Empathy and Google Talk
by Jayson Rowe 23 Apr '13

23 Apr '13

Greetings all, I've been using Xfce for quite a while as I've been dissatisfied with GNOME-Shell, but since 3.8 made it to the stable repos, I decided to try it out in Classic mode. I really like it. However, I can't seem to add my Google Talk account to Empathy. When the Accounts Window pops up, there is a dialog asking me what type of chat account I have, but there seems to be no options available. Is there a dependency I'm missing? Thanks, Jayson

2 1

[arch-general] Last TeXLive 2012 packages before TeXLive 2013
by Rémy Oudompheng 19 Apr '13

19 Apr '13

Hello, TeXLive 2012 continuous updates have been frozen for TeXLive 2013 preparation. I have uploaded updated versions of the TeXLive 2012 packages to [testing], feel free to report any problems. Regards, Rémy.

1 0

[arch-general] The "new" opensmtpd package
by Hugo Osvaldo Barrera 18 Apr '13

18 Apr '13

Hi, All of a sudden, this morning, after running pacman -Syu, I found myself incapable of sending emails from several of my machines. I had noticed not warnings, or errors, and, after tracking the issue for a while, it turns out the problem was the new opensmtpd package in [community], which had replaced my own one (present in AUR). I've been maintaining an opensmtpd package in AUR for a long time now (it was recently renamed to "opensmtpd", but I had maintaing it under the previous name since it's early development, which I follow very closely). One of the problems with the new package in [community], is that it's build configuration differs SO MUCH from the defaults (and my own package), that their settings are incompatible. I belive this goes against the Arch way, which is to stay as close as possible to upstream. Also, the one in [community] has explicit flags that actually reduce security (for what reason, I wonder?). At first, I though I'd contact the author, but I couldn't find out how. The PKGBUILD does not include the maintainer's email, and he's not listed as a TU or Dev. Finally, I'm a bit surprised as to how this happened. I planned to propose to move my own package from AUR to [community] at some point, but not yet, since it only has 7 votes (way less than what the wiki describes neccesary). Secondly, I'm confused as to how this is done. If there's a package in AUR, isn't that moved into [community] instead of writing a brand new one? Please don't take this as a rant of "You broke my email setup!", but rather as a "Hey, this isn't very transpart to the community; how do these thing happen? How do I contact the maintainer? What was the procedure to get this package into [community]? Is there any way I can participate in it's maintenence?" Thanks, -- Hugo Osvaldo Barrera

5 10

[arch-general] gummiboot kernel panic: unable to mount root fs
by David Benfell 17 Apr '13

17 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I haven't seen this one for a while--a long while. I assume it still means what it used to mean, that is, that I haven't correctly specified the root partition. gummiboot is proving to be a bit of an adventure on this Asus X202E. The gummiboot install command failed to create the boot loader entry, so I was grateful that the Arch Wiki page on UEFI had not yet been updated to eliminate the explanation on how to create the entry using efibootmgr. What gummiboot install *did* do seems a bit strange--particularly as it still works according to the old way as documented in the Arch Wiki page on gummiboot--on my desktop system. It created a loader.conf with a timeout of 3 and a default with a moderately long hex string appended with a '-*'. There are no corresponding entries in the entries subdirectory. The hex string does not appear to correspond to any PARTUUIDs on the system. I commented that out and set it up the old way as documented on the Arch Wiki page, and when that didn't work, discovered that I needed to use efibootmgr. Now the BIOS--or whatever it's supposed to be called these days--sees the Gummiboot option at least as a possible override, but when selected, I get the kernel panic mentioned in the subject. I'm not quite sure what the best way to proceed is at this point. I think I'm awfully close to having it working, but it *is* EFI, and so far, that's always an adventure. Thanks! -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRaa3nAAoJELJhbl/uPb4S2w8P/2r2fuUa85pXIjNuQ4+XHbJR NoeqjdcwT+/xlaAsLDh4c9hrcdX+5l4hPvMSib8pJAZWTY+AkUZ52w/t02FC5+hH Djw5e/jidbSCgR72xR2sKZzzqkQvv1WjxMwaayPlK8BTCuQprC3cGyhjTSIOKhXN Xs1w5ZWyOt01J6Chb4KLPFyBEKafxb/0BUgJLrG3i8q+X97BoX2nmjhPB5hGCmZx LCamvBG7pVGwMfikEzkcFl7ASc8YZGlHzGiIfey1SjabXA6xLLTdI8rsNJTuEYvq 34rAMkVozNo5rCyTQU7tJTsg8pA42AL+nrAAmNLDDRKUeEkXryP/gCN7WyzA++Dd y5x7MozO6CUiNcLcpc7ktkye7R/3TO0fGT1LDXrHIT8khRgz4vShvUuEJd5lGuUj bC0R2VXxke/wY3oI3KC3/ZEEqty0ceSCMWisoCNgYqRKjSYyJJV77nBWlVRsvmmI KkPIdIUrtjWCkrksQp8arQhuHc56kl+jr6lc3fIrDTXEZ94vf7dadKGWGS0YamyI BUCnNKFWinqblsl5b5uP4h9nIDOXwndy6PM58heJwwOc1U+M4iGEjBREBsQ3wsAK XZrGvc7LN6t+GlbzKL0qmAes2hvd/emlPo+cahgNEdx3q2A9Sds4VMrzbFfAN97l kv/HOERo0mZW1KH3mnwo =W177 -----END PGP SIGNATURE-----

3 9

[arch-general] Please update enlightenment17 and related packages in [extra] repo
by Eno Neemous 17 Apr '13

17 Apr '13

Hi, about a week ago (precise time<http://download.enlightenment.fr/releases/?C=M;O=D> ), enlightenment foundation released newer stable version of enlightenment17 and related libraries (download page<http://enlightenment.org/p.php?p=download> ), but those in [extra] repo are still older ones, and ronald seems inactive these days, can any developer update those packges to keep up with official releases? thanks in advance! Regards, Eino Neemous

1 0

[arch-general] BAT1: Unable to dock after suspend to RAM
by Bill Sun 15 Apr '13

15 Apr '13

Hi, I noticed there's alway an 'Unable to dock' error message after suspend to RAM: PM: Saving platform NVS memory Disabling non-boot CPUs ... smpboot: CPU 1 is now offline smpboot: CPU 2 is now offline smpboot: CPU 3 is now offline Extended CMOS year: 2000 ACPI: Low-level resume complete PM: Restoring platform NVS memory Extended CMOS year: 2000 Enabling non-boot CPUs ... smpboot: Booting Node 0 Processor 1 APIC 0x1 Disabled fast string operations CPU1 is up smpboot: Booting Node 0 Processor 2 APIC 0x2 Disabled fast string operations CPU2 is up smpboot: Booting Node 0 Processor 3 APIC 0x3 Disabled fast string operations CPU3 is up ACPI: Waking up from system sleep state S3 ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock! System info: ThinkPad X220, Linux 3.8.6 (ARCH), systemd 201-1, 1.4.1-5 I have tried to set Handle{SuspendKey,HibernateKey,LidSwitch} all to ignore, but I still get the same error message. Any other solution to make that message disappear? Regards.

1 0

[arch-general] gpg-agent, ssh keys, and systemd --user
by Robbie Smith 15 Apr '13

15 Apr '13

How can I get gpg-agent to work with ssh keys? The following script that I’ve put in /etc/profile.d sets it up, but I’d like to move my user daemons (such as gpg-agent) over to systemd --user. $ cat gpg-agent.sh #!/bin/sh envfile="${HOME}/.gnupg/gpg-agent.env" if test -f "$envfile" && kill -0 $(grep GPG_AGENT_INFO "$envfile" | cut -d: -f 2) 2>/dev/null; then eval "$(cat "$envfile")" else eval "$(gpg-agent --daemon --enable-ssh-support --write-env-file "$envfile")" fi export GPG_AGENT_INFO I’ve written the following user service, and it should do the same thing, but it doesn’t seem to work: $ cat ~/.config/systemd/user/gpg-agent.service [Unit] Description=GnuPG private key agent Wants=environment.target Before=environment.target IgnoreOnIsolate=true [Service] Type=forking Environment=GPG_ENVFILE=%t/gpg-agent.info ExecStart=/usr/bin/gpg-agent --daemon --enable-ssh-support --use-standard-socket --write-env-file ${GPG_ENVFILE} ExecStartPost=/bin/sh -c "xargs systemctl --user set-environment < ${GPG_ENVFILE}" ExecStopPost=/bim/rm %t/gpg-agent.info Restart=on-abort [Install] WantedBy=default.target Both the script and the service file start gpg, create an environment file, and export the variables. But for some reason, gpg-agent doesn’t store keys or anything if run as a service. I don’t know why. Can anyone help?

4 5

Re: [arch-general] [pacman-dev] debug package repositories
by Thomas Bächler 15 Apr '13

15 Apr '13

Am 13.04.2013 17:55, schrieb William Giokas: > All, > > With the inclusion of the debug option in pacman 4.1.0, I think it makes > sense to do something with this in the official repositories. I've > sifted through some bug reports asking for inclusion of the debug > symbols in a separate package or repository officially for testing > purposes. With [extra] and [community] approaching 1.5 and 2 megabytes > respectively, I think that adding debug symbols directly into these > repositories would be a bad idea as it would probably add ~50% to those > databases, and I've already seen some people complain about the sizes. This doesn't belong to the pacman mailing list (I'm forwarding to arch-dev-public and arch-general), but I'll summarize what will probably happen: Separate debug repositories won't happen - we can't even put split packages into different repositories, so it is unlikely that we'll support separate debug repositories - and I don't see the need. Even if the db sizes double, we are still way under 5MB per db, which is a reasonable size considering our users' bandwidth nowadays. Allan stated that he'll add a glibc-debug package to core, and it is also likely that KDE will get debug packages in extra (they have been requested a few times). Some links: https://mailman.archlinux.org/pipermail/arch-dev-public/2013-March/024736.h… https://mailman.archlinux.org/pipermail/arch-dev-public/2013-March/024740.h…

6 8

[arch-general] debug package repositories
by William Giokas 14 Apr '13

14 Apr '13

All, With the inclusion of the debug option in pacman 4.1.0, I think it makes sense to do something with this in the official repositories. I've sifted through some bug reports asking for inclusion of the debug symbols in a separate package or repository officially for testing purposes. With [extra] and [community] approaching 1.5 and 2 megabytes respectively, I think that adding debug symbols directly into these repositories would be a bad idea as it would probably add ~50% to those databases, and I've already seen some people complain about the sizes. What I would propose (and I've implemented this locally fine) is to have a separate series of repositories named [$repo-debug] that only contain the -debug packages, allowing those that don't bother with testing or debugging to simply not include them in their pacman.conf, but if there is something that they want to run valgrind or whatever on, they can simply enable the right [*-debug] repo for that package, and once they are done debugging simply remove that repo from their list along with the package. For really large packages, this will save people a while lot of time recompiling dependencies for these symbols. I talked to ioni on the channel, and he said that your repo scripts do not have support for this. If it's too much of a hassle, putting them in the same repo wouldn't be that terrible, honestly. Thank you, -- William Giokas | KaiSforza GnuPG Key: 0x73CD09CF Fingerprint: F73F 50EF BBE2 9846 8306 E6B8 6902 06D8 73CD 09CF ps: Sorry about sending it to the wrong list, first. (I actually had this queued up for a while...)

3 2

[arch-general] Another 'gotta be something idiotic': trying to create bootable USB thumb drive
by David Benfell 14 Apr '13

14 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I can't believe I'm having trouble with this. I'm trying to follow the directions at https://wiki.archlinux.org/index.php/USB_Installation_Media Specifically: dd bs=4M if=/path/to/archlinux.iso of=/dev/sdx Which I translate to: sudo dd bs=4M if=Downloads/archlinux-2013.04.01-dual.iso of=/dev/sdb dd: failed to open ‘/dev/sdb’: No medium found And you see the result. /dev/sdb does indeed exist and is writable. It's a brand new 4GB flash drive and I moved the crap that came preloaded on it somewhere else before dismounting it. Here's the dmesg snippet: [151086.251674] usb 2-3.1.4: new high-speed USB device number 5 using ehci-pci [151087.600267] Initializing USB Mass Storage driver... [151087.600770] scsi6 : usb-storage 2-3.1.4:1.0 [151087.601106] usbcore: registered new interface driver usb-storage [151087.601112] USB Mass Storage support registered. [151088.603391] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Glide 1.26 PQ: 0 ANSI: 5 [151088.606083] sd 6:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB) [151088.608130] sd 6:0:0:0: [sdb] Write Protect is off [151088.608149] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [151088.611180] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [151088.632405] sdb: sdb1 [151088.637930] sd 6:0:0:0: [sdb] Attached SCSI removable disk [151129.666614] usb 2-3.2: new high-speed USB device number 6 using ehci-pci [152047.595383] ------------[ cut here ]------------ [152047.595438] WARNING: at drivers/usb/host/ehci-hcd.c:1054 ehci_endpoint_reset+0x113/0x120 [ehci_hcd]() [152047.595444] Hardware name: p2-1120 [152047.595449] clear_halt for a busy endpoint [152047.595453] Modules linked in: usb_storage tun nls_cp437 vfat fat fuse joydev acpi_cpufreq mperf evdev kvm radeon ttm microcode drm_kms_helper pcspkr psmouse drm snd_hda_codec_realtek snd_hda_intel serio_raw sp5100_tco i2c_piix4 snd_hda_codec k10temp i2c_algo_bit snd_hwdep snd_pcm i2c_core atl1c snd_page_alloc snd_timer snd soundcore button video processor vboxnetadp(O) vboxdrv(O) ext4 crc16 jbd2 mbcache hid_generic usbhid hid sr_mod cdrom sd_mod ahci libahci ohci_hcd ehci_pci ehci_hcd libata usbcore scsi_mod usb_common [152047.595550] Pid: 30474, comm: pool Tainted: G O 3.8.6-1-ARCH #1 [152047.595556] Call Trace: [152047.595574] [<ffffffff81057190>] warn_slowpath_common+0x70/0xa0 [152047.595584] [<ffffffff8105720c>] warn_slowpath_fmt+0x4c/0x50 [152047.595612] [<ffffffffa0043645>] ? usb_control_msg+0xe5/0x130 [usbcore] [152047.595628] [<ffffffffa0178cf3>] ehci_endpoint_reset+0x113/0x120 [ehci_hcd] [152047.595650] [<ffffffffa00422b5>] usb_hcd_reset_endpoint+0x25/0x70 [usbcore] [152047.595670] [<ffffffffa0044558>] usb_reset_endpoint+0x28/0x40 [usbcore] [152047.595690] [<ffffffffa00445de>] usb_clear_halt+0x6e/0x80 [usbcore] [152047.595710] [<ffffffffa004f305>] usbdev_do_ioctl+0xba5/0x1050 [usbcore] [152047.595730] [<ffffffffa004f7de>] usbdev_ioctl+0xe/0x20 [usbcore] [152047.595741] [<ffffffff81199775>] do_vfs_ioctl+0x2e5/0x4d0 [152047.595750] [<ffffffff811999e1>] sys_ioctl+0x81/0xa0 [152047.595762] [<ffffffff814c735d>] system_call_fastpath+0x1a/0x1f [152047.595769] ---[ end trace a5c78ffe5f331d3c ]--- [152047.599593] usb 2-3.2: usbfs: process 30321 (events) did not claim interface 0 before use [152051.469939] sdb: detected capacity change from 4004511744 to 0 [152062.408991] usb 2-3.2: USB disconnect, device number 6 Here's lsusb -v: Bus 002 Device 003: ID 2109:2812 Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x2109 idProduct 0x2812 bcdDevice 85.70 iManufacturer 0 iProduct 1 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Bus 004 Device 002: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc31c Keyboard K120 for Business bcdDevice 64.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 90mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 2 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 65 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 2 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 159 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 255 Bus 004 Device 003: ID 047d:1020 Kensington Expert Mouse Trackball Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x047d Kensington idProduct 0x1020 Expert Mouse Trackball bcdDevice 1.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 52 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 10 Bus 005 Device 002: ID 09ae:2009 Tripp Lite Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x09ae Tripp Lite idProduct 0x2009 bcdDevice 0.10 iManufacturer 3 iProduct 1 iSerial 2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 590 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 40 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.08 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.08 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.08 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.08 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.08 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.08 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.08 iManufacturer 3 iProduct 2 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Bus 002 Device 004: ID 2109:2812 Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x2109 idProduct 0x2812 bcdDevice 85.70 iManufacturer 0 iProduct 1 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 12 Bus 002 Device 005: ID 0781:5575 SanDisk Corp. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0781 SanDisk Corp. idProduct 0x5575 bcdDevice 1.26 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 200mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 I believe, based on idVendor, that the device I'm looking for is the last of these. What am I missing? Thanks! -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRZ1guAAoJELJhbl/uPb4SJJgP/i+4ROaYXip28jouYeOscXJl TjCzkaIQt/Pe+Q87iuCpUy57Rw0t4olh0mvBGcQMC5Bz2w+mnb5v0UyI+SFERmF/ RipSjecrrK5FXNsTzVMSyPqcXmLQcscV7uqJWIEcFDug0C3O1g14QJESzIcn4z8y C0kT1KavDYZcd07c3o+XlM5UwurWlDiacn4wXVlxZBy75m+jzBLyJiGR4sxHGuZe S0lZ99Aci5EuJQr5fEWxedn5VYdcdsrf3YCYL5cOdru1EaIgCvjDVLFanUS4FZ9S YSsQkbERvOu6RDrUgYLm/hbptEXZgC/4erVpzpUYqIwx30u7W4bFy8A9VqN4UrSj 3AWRGkYNv57mq424PsEDuCHIIpMC6pQMaNhWTkzIeCP5AnKoZS4xVE43McFSbGoy ZK4d05oB1ySdWxOnhn5oiNGrkCT6FmM/x7bgktJCOW4fkRD7yqRaDoquJNLWo+qT 4QPszMxATh2wQV0BUPmMkb/t9AurSFR7FhCIw0BMKxknUg3wOU52ixs4QbdrNFqs iu3ABoc67CjD39JfWYipJKoab6RfjPRtj4qHFtiTZVobQKZN1wqZz73Sg+W/ZSe7 Jc4wePyoJEhZl21RFGiPWWNlEv9dcY3aY0PB6UUsLVYAX4SmPRyQT7JZcOA+GilU GMP775NbA+F1K4UBngLU =Ceq5 -----END PGP SIGNATURE-----

6 11

[arch-general] PKGBUILD weirdness
by Robbie Smith 11 Apr '13

11 Apr '13

I’ve been working on my own fork of luakit, building and installing it to test changes, and I’ve come across some weirdness in the PKGBUILD. The original luakit-git PKGBUILD[1] has a set of options to pass to make to (for example) enable luajit. I rewrote it to conform with pacman/makepkg 4.1 vcs standards[2], and for some reason, if I use an auxiliary variable to store these options, the packaging fails. Can anyone shed some light on why this might be so? [1] https://aur.archlinux.org/packages/lu/luakit-git/PKGBUILD [2] https://github.com/luakit-crowd/luakit/blob/develop/extras/PKGBUILD

2 4

[arch-general] mdadm: RAID-5 performance sucks
by Karol Babioch 10 Apr '13

10 Apr '13

Hi, I've got four HDDs and added them into a RAID-5 array, which basically works just fine. However the performance sucks quite hard. I get only about 70 MB/s when it comes down to reading and writing speeds of about 35 MB/s. The hardware itself is quite decent: Intel Xeon E31260L, 8 GB RAM and four Samsung HD204UI's. With the same setup and a Ubuntu live environment I get about 270 MB/s reading speed and 130 MB/s writing speed. Therefore there must be a fundamental difference. I've compared various values from sysctl between both environments and set them accordingly, but to no availability. Anyone else experiencing the same issues and/or can you point me in the right direction? At least I would like to saturate my Gigabit Ethernet connection. Best regards, Karol Babioch

3 4

Re: [arch-general] [arch-dev-public] Build issues due to -D_FORTIFY_SOURCE=2 in CPPFLAGS
by Joakim Hernberg 10 Apr '13

10 Apr '13

On Mon, 08 Apr 2013 16:54:54 +1000 Allan McRae <allan(a)archlinux.org> wrote: > Hi, > > With pacman-4.1 we introduced CPPFLAGS in makepkg.conf and moved the > -D_FORTIFY_SOURCE=2 flag out of C{,XX}FLAGS to there (where it should > be). This of course will break wine's builtin workaround for FORTIFY_SOURCE, which assumed that it was in CFLAGS. Maybe no matter as for some reason it wasn't working on archlinux in any case. It produces the following (snipped from the gcc output) -D_FORTIFY_SOURCE=2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0, which for some reason seems to produce broken code. -- Joakim

2 1

[arch-general] [makepkg] Permission denied on pkg/ directory
by Robbie Smith 10 Apr '13

10 Apr '13

I’ve been porting my old PKGBUILDs to the 4.1 format for VCS packages, and for some reason I keep getting errors building the package, with the pkg/ directory being created with 000 (d---------) permissions. My umask isn’t malformed as I can create directories and files just fine, and if I chmod the directory and re-run makepkg, it seems to lock the directory. Is this a bug, or a new feature of 4.1? Or have I misconfigured something somewhere? I did a diff of the configuration files when 4.1 was released so they should be up-to-date.

2 2

[arch-general] mkinitcpio: fsck - Does it actually make sense?
by Karol Babioch 10 Apr '13

10 Apr '13

Hi, I'm wondering whether it makes actually sense to include the fsck hook into the initial ramdisk. With the "current" switch to systemd filesystems get fsck'ed by default anyway, so it seems to be sort of redundant. Is there something I'm missing here, or how do you handle this? Best regards, Karol Babioch

4 3

[arch-general] Beginner's Guide: Disable dhcpd service before setting static ip
by Siddhartha Sahu 09 Apr '13

09 Apr '13

Hi, In the setting up network section of beginner's guide [1], there should be an instruction to disable dhcpd service before setting up the static ip, otherwise dhcpd automatically rewrites the resolv.conf file, removing user set details. Wanted to confirm if I am right. Can I edit the wiki to include the instruction: 'systemctl stop dhcpd.service' in the beginning of the "Wired" section? [1] https://wiki.archlinux.org/index.php/Beginners%27_Guide#Wired Thanks! Siddhartha Sahu

5 6

Re: [arch-general] [arch-dev-public] samba 3.6.x -> samba 4.0.x migration
by Karol Babioch 09 Apr '13

09 Apr '13

Hi, Am 27.03.2013 16:55, schrieb Tobias Powalowski: > I'll release samba 4.0.x to testing. anything holding this one back to hit the official repository? > Do we need an announcement or an install news during upgrade? I guess it wouldn't hurt as this is quite a big change ;). Best regards, Karol Babioch

2 1

[arch-general] virtualbox-host-modules
by Ralf Mardorf 08 Apr '13

08 Apr '13

Hi, where should be the modules? Last time there was the claim _not_ in extramodules. # pacman -Qi virtualbox Depends On : virtualbox-host-modules # pacman -Ql virtualbox-host-modules /usr/lib/modules/extramodules-3.8-ARCH/vboxdrv.ko.gz /usr/lib/modules/extramodules-3.8-ARCH/vboxnetadp.ko.gz /usr/lib/modules/extramodules-3.8-ARCH/vboxnetflt.ko.gz /usr/lib/modules/extramodules-3.8-ARCH/vboxpci.ko.gz # ls 3.8.4-rt2-1-rt 3.8.6-1-ARCH extramodules-3.8-ARCH extramodules-3.8-rt # ls extramodules-3.8-ARCH vboxdrv.ko.gz vboxnetadp.ko.gz vboxnetflt.ko.gz vboxpci.ko.gz version # ls 3.8.6-1-ARCH/kernel/misc/ vboxdrv.ko vboxnetadp.ko vboxnetflt.ko vboxpci.ko I deleted the modules in extramodules and kept the ones build by the hook. It would be nice if virtualbox-host-modules could become an optional dependency. Regards, Ralf

2 1

[arch-general] "Broken pipe" messages while last archlinux keyring update
by Manuel Reimer 08 Apr '13

08 Apr '13

Hello, with the last update of the Archlinux keyring package, I got a few errors like the following one: usr/bin/pacman-key: line 615: printf: write error: Broken pipe Is this a known bug or can this be ignored? Yours Manuel Reimer

1 0

[arch-general] Namcap 3.2.5
by Rémy Oudompheng 07 Apr '13

07 Apr '13

Hello, Namcap 3.2.5 is available in [testing]. It features the following changes: - support "SKIP" in checksums (FS#34647) - export CARCH correctly to parsepkgbuild (FS#32568) - recognize .MTREE as package metadata (FS#34591) Rémy.

1 0

[arch-general] spamd "config: cannot create user preferences file"
by David Benfell 06 Apr '13

06 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, Casting about on the web, I gather this is an ownership/permissions issue. That'd be fine and I might know what to do about it if I knew where spamd was trying to create it and, for that matter, under what user. But I don't even know where the configuration is (assuming there is one). It looks to me like it is running as root: munich# ps aux | grep spam root 4221 0.2 2.6 168548 80532 ? S 15:16 0:20 spamd child root 15711 0.0 2.2 156172 68244 ? S 05:20 0:03 spamd child root 17327 0.0 0.0 14340 1100 pts/1 S+ 18:07 0:00 grep spam root 18855 0.0 1.8 145704 58072 ? Ss Apr03 0:22 /usr/bin/vendor_perl/spamd -d --pidfile /var/run/spamd.pid -c But otherwise, the systemd service file and the /etc/conf.d/spamd file aren't telling me much. The normally excellent Arch Wiki that I'm still learning to remember to look at doesn't seem to have an entry for spamassassin. Any ideas? Thanks! -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRX3cwAAoJELJhbl/uPb4SZ8cQAIBzfRvvFhwr3Q8xOdHTv+D8 C8ozH5joGu7UAFBRmvkjSk8IGaML1+cYjaJT8e0EFT9qUMuF/JKxPbnN62xMWad5 JNc0QS7tx5pz6GmibreZytSCOEOZhvh5BN2QYSf3ouF6VRWMxxygmsAlKW94zP/V Z/MkTrb84aM0ZO2RDz20Am0Ox5KCH5ErRfq95TOdPGaAxqb672jTZse4IAP7QA+E kOCy1TP/BWh+oKmgQTy78vDtzixT7I+rcvPxu1yqPSaLbqmvoUQJ+S4Gcwzqcg8q VgbP/G1AXXwI83vj6xAk952uB6UjiwhuKLRAjhLx7oX8jzvTaXd7dttNpi9QJFQp oFi0rkyNerroS2Z/TXhyMJLrGQR2Cwu12o5xmOp4flGmOgLcPzVa242ke6s1Uh7n LPjf8aGOFYribcyIKj01Gb7XttbTxAlR6AEe/f3Eoh16ldyik5kLazOKB7mUyx7L 8EaUdpUr4o+IzXWL9RGuwEHtEk3cMcuDqGSdrEhnoitJ2eshhNeNB6KI6Yikc8ar hMzbm3qlOKndBUDhyC16/vczg7jgfir+97LJaWVGR0Q85X3RY+Vfy95C8ANMWHEG 1bsl8g1kLb5lo/PmB6FjDyLJYnwXLk+xYqqVuWm7anNPLjIJX9JP5UCkMXN/r5Xl YheohhiMs+ohP5xNc63b =GYz+ -----END PGP SIGNATURE-----

1 1

[arch-general] directive 'SyncFirst'
by Ralf Mardorf 05 Apr '13

05 Apr '13

Hi :) how can be ensured that e.g. linux-headers are updated first in the future? I couldn't find a word on the English Arch website and just the information that it is ignored now, without a hint what to do, on the German website. [root@archlinux yaourt-git]# pacman -Syu warning: config file /etc/pacman.conf, line 19: directive 'SyncFirst' in section 'options' not recognized. :: Synchronizing package databases... core is up to date extra is up to date community is up to date multilib is up to date :: Starting full system upgrade... warning: ardour: ignoring package upgrade (2.8.16-1 => 3.0-1) there is nothing to do [rocketmouse@archlinux yaourt-git]$ yaourt -Syu [sudo] password for rocketmouse: warning: config file /etc/pacman.conf, line 19: directive 'SyncFirst' in section 'options' not recognized. :: Synchronizing package databases... core is up to date extra is up to date community is up to date multilib is up to date warning: config file /etc/pacman.conf, line 19: directive 'SyncFirst' in section 'options' not recognized. Regards, Ralf

3 3

[arch-general] (no subject)
by Victor Silva 05 Apr '13

05 Apr '13

Guys today in a scrum meeting we were discussing the need of guidelines to improve our corporative wiki. I remmember archwiki had a section as ways to contribute to the wiki. I found some materials as https://wiki.archlinux.org/index.php/General_Recommendations https://wiki.archlinux.org/index.php/Forum_Etiquette https://wiki.archlinux.org/index.php/ArchWiki:Contributing#Organizing But I remmember there was some more specific material which seems to be merged with the archway https://wiki.archlinux.org/index.php/The_Arch_Way I know in this guidelines they pointed the need of a section as: https://wiki.archlinux.org/index.php/ArchWiki:Requests and https://wiki.archlinux.org/index.php/ArchWiki:Contributing Would any of you know if this material is still around (maybe in some other language?) Thanks!

1 0

Re: [arch-general] [arch-dev-public] pacman-4.1
by Leonidas Spyropoulos 05 Apr '13

05 Apr '13

On Thu, Apr 4, 2013 at 11:25 PM, Allan McRae <allan(a)archlinux.org> wrote: > On 05/04/13 07:42, Sébastien Luttringer wrote: >> On Mon, Apr 1, 2013 at 8:39 AM, Allan McRae <allan(a)archlinux.org> wrote: >> >>> Hi, >>> >>> Pacman-4.1.0 is released and in the [testing] repos. See my blog [1] >>> for details of what is new in this release. >>> >> With this commit[1], can we assume that install script should now be >> written in bash? >> >> >> [1] >> https://projects.archlinux.org/svntogit/packages.git/commit/trunk?h=package… >> > > What did you think it was written in previously? We have always used > bashisms. > > Allan > I saw in the makepkg.conf that there are new COMPRESS vars. Any of these support parallel compression (thread level) like 7zip? And if yes, how can I enable them? Thanks -- Caution: breathing may be hazardous to your health. #include <stdio.h> int main(){printf("%s","\x4c\x65\x6f\x6e\x69\x64\x61\x73");}

2 1

[arch-general] failed to mount root on raid1 after upgrade
by Łukasz Michalski 04 Apr '13

04 Apr '13

Hi, I am a new arch user and this is my first post on this list, so welcome everyone :-) 29th I upgraded my system using pacman -Syu and after that my system does not boot. The problem is that I have root partition on software raid1 and for some reason scripts from initramfs are not able to create /dev/md device and mount it on /new_root. I am using mdadm hook. Now during booting I need to wait for "emergency shell" and mount root partition manually this way: # mdassemble # mount /dev/md2 /new_root # exit I am using lilo as bootloader, not grub. My revelant part of mdadm.conf looks like this: ARRAY /dev/md2 metadata=0.90 UUID=bdfacff7:ab87d057:56b4b521:970a1f14 ARRAY /dev/md3 metadata=1.2 name=serenity:3 UUID=1c4f1323:dc8291ca:79423de8:04e93f2e ARRAY /dev/md1 metadata=0.90 UUID=57c89626:270d4c7b:dedbdb45:3a92e6da (md1 is swap, md2 is root, md3 is home). Hooks that I use in /etc/mkinitcpio.conf HOOKS="base udev autodetect modconf block mdadm filesystems keyboard fsck" This is my lilo.conf: boot=/dev/md2 raid-extra-boot="/dev/sda,/dev/sdb" read-only lba32 prompt timeout=100 default=arch image=/boot/vmlinuz-linux label=arch root=/dev/md2 initrd=/boot/initramfs-linux.img image=/boot/vmlinuz-linux label=arch-fallback root=/dev/md2 initrd=/boot/initramfs-linux-fallback.img I am not sure what hooks/mdadm is supposed to do, for me it looks like it I have to add md=/dev/md2 to command line when booting? I would appreciate any help to resolve this issue. Thanks, Łukasz

3 4

[arch-general] Installing by remote control -- network trouble
by David Benfell 04 Apr '13

04 Apr '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I've almost got this. My dedicated server appears to be willing to boot from the disk, but the network doesn't come up. Here is the service file: [root@munich ~]# cat /etc/systemd/system/network.service [Unit] Description=Wireless Static IP Connectivity Wants=network.target Before=network.target BindsTo=sys-subsystem-net-devices-net0.device After=sys-subsystem-net-devices-net0.device [Service] Type=oneshot RemainAfterExit=yes ExecStart=/sbin/ip link set dev net0 up ExecStart=/sbin/ip addr add 193.34.144.104/25 dev net0 ExecStart=/sbin/ip addr add 91.205.174.230/27 dev net0 ExecStart=/sbin/ip addr add 91.205.174.231/27 dev net0 ExecStart=/sbin/ip addr add 91.205.174.232/27 dev net0 ExecStart=/sbin/ip addr add 91.205.174.233/27 dev net0 ExecStart=/sbin/ip addr add 91.205.174.234/27 dev net0 ExecStart=/sbin/ip addr add 91.205.174.235/27 dev net0 ExecStart=/sbin/ip addr add 91.205.174.236/27 dev net0 ExecStart=/sbin/ip addr add 91.205.174.237/27 dev net0 ExecStart=/sbin/ip addr add 91.205.174.238/27 dev net0 ExecStart=/sbin/ip addr add 91.205.174.239/27 dev net0 ExecStart=/sbin/ip route add default via 193.34.144.1 ExecStop=/sbin/ip addr flush dev net0 ExecStop=/sbin/ip link set dev net0 down [Install] WantedBy=multi-user.target [root@munich ~]# It is based on the example at https://wiki.archlinux.org/index.php/Network which I also used for my home desktop, where it works fine. (Though the latter has only one IP address not eleven of them.) The system log says that it is timing out: Job sys-subsystem-net-devices-net0.device/start timed out. Timed out waiting for device sys-subsystem-net-devices-net0.device. Dependency failed for Wireless Static IP Connectivity. I tried a few things, changing the service file to: [root@munich ~]# cat /etc/systemd/system/network.service [Unit] Description=Wireless Static IP Connectivity Wants=network.target Before=network.target BindsTo=sys-subsystem-net-devices-net0.device After=sys-subsystem-net-devices-net0.device [Service] Type=oneshot TimeoutSec=0 Restart=always RestartSec=30 RemainAfterExit=yes ExecStart=/sbin/ip link set dev net0 up ExecStart=-/sbin/ip addr add 193.34.144.104/25 dev net0 ExecStart=-/sbin/ip addr add 91.205.174.230/27 dev net0 ExecStart=-/sbin/ip addr add 91.205.174.231/27 dev net0 ExecStart=-/sbin/ip addr add 91.205.174.232/27 dev net0 ExecStart=-/sbin/ip addr add 91.205.174.233/27 dev net0 ExecStart=-/sbin/ip addr add 91.205.174.234/27 dev net0 ExecStart=-/sbin/ip addr add 91.205.174.235/27 dev net0 ExecStart=-/sbin/ip addr add 91.205.174.236/27 dev net0 ExecStart=-/sbin/ip addr add 91.205.174.237/27 dev net0 ExecStart=-/sbin/ip addr add 91.205.174.238/27 dev net0 ExecStart=-/sbin/ip addr add 91.205.174.239/27 dev net0 ExecStart=/sbin/ip route add default via 193.34.144.1 ExecStop=/sbin/ip addr flush dev net0 ExecStop=/sbin/ip link set dev net0 down [Install] WantedBy=multi-user.target [root@munich ~]# No joy. What am I missing? Thanks! - -- David Benfell <benfell(a)parts-unknown.org> <dbenfell(a)saybrook.edu> See https://parts-unknown.org/node/2 for GnuPG (the attachment you don't understand) information. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.17 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRW6KdAAoJELJhbl/uPb4SdTkP/jug6btO3lWlJ+KXz3UqzXIc OYRb80337OZIWY44zo3KdBqtLEO3aG2W4qdJB5Z4LLYku4VgxFsevj9PKYtrQofh G9mXuAFTqTUyjUnAkRvn0LwejAyv8+4ifn/ZdrGSuW0+TmLK05iZgY+ythfWKAyZ S7lgxeRRhQu2ntHLjK+zWte3oVhhhXh0krvpxN0z7IAD6uXZU7ucajdLgujeU+6n +ynlXf0R1/G94gaghGNtOATOgVXr5fs53KbFSLZJLQKjvZinff/b4VVBDG9wxLP7 qkG5G/MFwjEe3x06iuJ3dJJedXVAV7Oc4mO0rELQw8gENXkbdxcPlyDWAjCySK95 T/7RmspcizXJAqz/cDOlYx1aylg9StXmj9QTuHpWHFBBuHpo1ZxASacnMkD96QPZ ozJawihpddHiDON0PBbLH11xPtamrW7x19gly1v96PXPHxJ4NSn0NX04BiuPwfFQ 2F6P3Z1TkijxNUU1ZIvIga5vDlilGYRDErKcTcL/n8XxgfOjH5KVhEXe9SkxKFJv WZGprQzRFpCRMV0WBm+YTAC3PbhnPXnvVMWyrBDA7GchjxfMpzqNcvDJuAO1ol/W AL1LygH82da355r417RkSXDZLydvc1UMST2Bd+4vi5he4p+W2n+kJSg+44fKW8u/ elmtkUZofRkYeqcfZyCQ =Qrpj -----END PGP SIGNATURE-----

2 3

[arch-general] Installing Arch Linux on pure ZFS root
by Stanislav Seletskiy 04 Apr '13

04 Apr '13

Hello, Archers! In the light of "production ready" ZoL I've tried to install Arch on pure ZFS root (without additional boot partition) and stuck in problem with GRUB2. Current version of GRUB2 is not detecting ZoL in any way ("grub-probe /" does not return zfs, but errors). In the official repo on the github I've numerous see references to patched GRUB of version 1.99 (https://launchpad.net/~zfs-native/+archive/grub) but it is ubuntu only. Does anybody install Arch on ZFS root/boot without additional partitioning? Is it even possible? Thanks! -- Stanislav Seletskiy

4 4

[arch-general] MariaDB and DBMail: do not switch from mysql
by Sergej Pupykin 03 Apr '13

03 Apr '13

Hello, it looks like mariadb has problems in "order by". Following query returns data in wrong order: SELECT l.part_key, l.part_depth, l.part_order, l.is_header, DATE_FORMAT(ph.internal_date,GET_FORMAT(DATETIME,'ISO')), data FROM dbmail_mimeparts p JOIN dbmail_partlists l ON p.id = l.part_id JOIN dbmail_physmessage ph ON ph.id = l.physmessage_id WHERE l.physmessage_id = <ID> ORDER BY l.part_key,l.part_order ASC; I've had headache with my mail server. Switching back to mysql helps.

1 0

[arch-general] file-5.14 - change in how information is read from vmlinuz?
by Oon-Ee Ng 03 Apr '13

03 Apr '13

Hi, I previously used the output from `file /boot/*` on the various vmlinuz files in /boot/* to detect what kernels were installed on a machine. As of file 5.14 this no longer works[1]. I'm not sure what's changed, perhaps the magic.mgc file? When I copy the magic.mgc file from previous (5.13) version of the file package I get the 'expected' output[2]. Not sure if this is a bug or simply a change in behaviour. [1] - /boot/vmlinuz-linux: x86 boot sector [2] - /boot/vmlinuz-linux: Linux kernel x86 boot executable bzImage, version 3.8.5-1-ARCH (tobias@T-POWA-LX) #1 SMP PREEMPT Fri Mar 29 19:18, RO-rootFS, swap_dev 0x3, Normal VGA

3 3

[arch-general] Permission Denied cifs mount
by Squall Lionheart 01 Apr '13

01 Apr '13

Hello, I perform pacman -Suy updates each Monday on my system and ever since the 25th, I have not been able to mount shares from a local Samba server. My mount.cifs binary has the setuid bit and the mountpoint I am trying to mount to has permissions of 770 with owner and group set to my users. I have tried mounting manually as both my user and root and get the same error. The response from attempting to mount is: # mount -t cifs //sambaserver/Music Music mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) The entries I have in /etc/fstab look like: //sambaserver/Music /mnt/sambaserver/Music cifs rw,users,guest,noauto,uid=1000,gid=100 0 0 I am able to see information regarding the shares using the smbclient -L option. The server is a Slackware server running samba-3.5.8. Local device mounting, such as usb drives and local HD devices mount fine. The samba and smbclient packages were updated from 3.6.12-2 to 3.6.13-1. Currently running Linux 3.8.4-1 and systemd 198-1. Any suggestions to get this working again would be greatly appreciated. Let me know if any additional information is needed. Thank you in advance Squall -- Yesterday is history. Tomorrow is a mystery. Today is a gift. That's why its called the present. Headmaster Squall :: The Wired/Section-9 Close the world txen eht nepo $3R14L 3XP3R1M3NT$ #L41N https://github.com/headmastersquall

3 3

[arch-general] Is makepkg completely broken in pacman 4.1 ?
by fredbezies 01 Apr '13

01 Apr '13

Hello. I just upgraded to pacman 4.1.0 this morning, and I wanted to build some packages from AUR, like qemu-git for example. But when I launch makepkg -s, I got this message : ==> ERROR: qemu-git is not available for the '@CARCH@' architecture. Note that many packages may need a line added to their PKGBUILD such as arch=('@CARCH@'). Of course, it worked yesterday with previous makepkg. I try with pacman 4.1.0 from testing and I get : ==> ERROR: pacman is not available for the '@CARCH@' architecture. Note that many packages may need a line added to their PKGBUILD such as arch=('@CARCH@'). ==> ERROR: install file (pacman.install) does not exist. So I reported a bug : https://bugs.archlinux.org/task/34542 Did anybody get this too ? Thanks for your answer. -- Frederic Bezies fredbezies(a)gmail.com

2 1

[arch-general] svntogit 500/missing branches
by Chris Down 31 Mar '13

31 Mar '13

Is it just me, or is svntogit returning 500 frequently? When it does return a real page from cgit (which seems to be about 50% of the time), it is missing lots of branches and generally just displays nothing if you're looking at, say, the log for linux-lts (what I first was looking for when I encountered this). Sorry if this was already posted elsewhere, I didn't see it on -dev-public or -general.

3 4

[arch-general] gnome 3.7
by José Vilmar Estácio de Souza 30 Mar '13

30 Mar '13

Hi all. Are there repositories from where I can install gnome 3.7? Thanks. -- {}S José Vilmar Estácio de Souza

5 6

[arch-general] upgrading mysql to mariadb
by David Benfell 30 Mar '13

30 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I had managed not to see this: https://www.archlinux.org/news/mariadb-replaces-mysql-in-repositories/ But it turned up on one of my feeds today, so I went to work. All went well until the final step, the upgrade: Phase 3/3: Running 'mysql_fix_privilege_tables'... ERROR 1064 (42000) at line 87: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '(6) NOT NULL, user_host MEDIUMTEXT NOT NULL, thread_id INTEGER NOT NULL, server_' at line 1 ERROR 1243 (HY000) at line 88: Unknown prepared statement handler (stmt) given to EXECUTE ERROR 1243 (HY000) at line 89: Unknown prepared statement handler (stmt) given to DEALLOCATE PREPARE ERROR 1064 (42000) at line 95: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '(6) NOT NULL, user_host MEDIUMTEXT NOT NULL, query_time TIME(6) NOT NULL, lock_t' at line 1 ERROR 1243 (HY000) at line 96: Unknown prepared statement handler (stmt) given to EXECUTE ERROR 1243 (HY000) at line 97: Unknown prepared statement handler (stmt) given to DEALLOCATE PREPARE ERROR 1064 (42000) at line 343: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '(6) NOT NULL, ERROR 1064 (42000) at line 354: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '(6) NOT NULL, ERROR 1548 (HY000) at line 1136: Cannot load from mysql.proc. The table is probably corrupted ERROR 1548 (HY000) at line 1137: Cannot load from mysql.proc. The table is probably corrupted ERROR 1548 (HY000) at line 1150: Cannot load from mysql.proc. The table is probably corrupted FATAL ERROR: Upgrade failed I haven't checked thoroughly, but it appears my sites are all up. So I really don't know what to make of this. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRVhBJAAoJELJhbl/uPb4S7bwQAJHMeHYNO1I1PLD6/C9zvj+4 tNT7Z2qYAHyodnTY7ZzPs0726PX4OPPztPT4k28Bstl3CW4GSMyi9m2zliDJiJk+ q2mhfxNKkP3lAMH5Yq1Nzku86DEuibJtuzfSNm0HkNLGh9MnL/rL32nQRwaYT+XZ 1A8tBQtqNPUOvNLG6m1GoHqptwfuaWud72QWQ+iI3o8sqi2+rBeS9t0Lje3C3RVY 8R7XPk0ilOOwzItgC27zYWTJ8BuK//UsJ/cF4ZS1pcFk2+WvB9X7kwjKvFj0PP97 qqEjfnWwf6zspoCzKBg7rJQulh2VB4dGHaWljxWrDXyUn8DSoQ1Oyfz3GYHch0+l vetXks11NhVDEzxiJ1rtBQsAtPrXjOunTXAU2b9kuIt5aMbQVgUrfyavqSBFUa6j 6LZVAT7dkmCYVZIHwDkuwBRmc02x1TrigzpUlv8sqNEnd/MDsgX0IvhXBhJAF5j0 DueF8m7TGl8wl1UgVvpNNmJ/cfiJWC3+k3cmKLG+ldvoHzPVgBSbR1zeFKsqD5N3 lcU8VOGosxf2GpBNAIyXT8LYMdwg1FXvX8zkf3wyyUc+LhgbxWhRpGsUM2Kc5m+K X9UenI/SXJjrFBfRU31S+/voWQPCVPHb9RzHDM6oJyAsb7lDc6I/nRITDjXCu9U2 bzg/liGHVI39/2CYQpeO =4+EX -----END PGP SIGNATURE-----

2 1

[arch-general] downgrades when moving out of [testing]
by Matthew Monaco 28 Mar '13

28 Mar '13

I typically upgrade with -uu, and use [*testing]. I've noticed lately that there is a window when a package moves out of [testing] that it will be downgraded. For example, this happened when openssh-6.2 recently moved. Are the packages being removed from [testing] before being added to e.g. [core]? Does mirroring happen separately, but faster for [testing]? (I use kernel.org) Best, Matt

9 10

[arch-general] Automatically stop systemd service
by Robbie Smith 28 Mar '13

28 Mar '13

TL;DR: More toying with mobile broadband and systemd; would like help automatically stopping service depending on device availability. I’ve been adjusting the .service file for netcfg(a)ppp-mobile.service so it plays nicely with my modem. It will only start if the USB modem is plugged in and exposing a serial port to the computer, and when I manaually stop the unit, the ppp daemon is also killed, so it doesn’t lock the device and reconnect automatically upon the device being detected again, thus *bringing up the network interface when systemd and netcfg say it is down*. /etc/systemd/system/netcfg(a)ppp-mobile.service: ---------------------------------------------- .include /usr/lib/systemd/system/netcfg@.service [Unit] Description=Netcfg networking service for mobile broadband point to-point protocol. ConditionPathExists=/dev/ttyUSB0 [Service] KillMode=control-group What I cannot figure out how to do is automatically stop the service if the device is unplugged, similar to how ifplugd works for wired ethernet interfaces. I’ve read the manual pages and asked Google, and I cannot seem to find more detailed information. I think it may be possible to write a service that will use udev’s polling capabilities, but then I have to somehow link that unit to the netcfg one such that it gets stopped and started when netcfg is, which implies it would listen to udev, wait for the device to be unplugged, then stop netcfg and kill itself. systemd's PartOf= may offer an answer, but I don’t really know how to tie it all together. How should I best go about this? Another systemd service, a udev rule, or is it possible to further modify the ppp-mobile service? regards, Robbie

2 4

[arch-general] netctl development
by Robbie Smith 28 Mar '13

28 Mar '13

Is there a publicly-accessible list to follow the development of netcfg’s successor-to-be, netctl? From my experiments with systemd and netcfg, there’s a few features that could definitely come in useful, and I’m certainly willing to help contribute where I can, be it testing, coding, or writing documentation. Does it depend on anything in [testing] or could I build and install it via ABS/AUR?

2 2

[arch-general] [classroom] PKGBUILD Lessons postponed
by William Giokas 27 Mar '13

27 Mar '13

All, The first Arch Linux class has been postponed. The other presenter, Daniel Wallace, has recently been hired and will be inactive[0]. He will be unavailable for much of the next month as well. March 31st is Easter, and we understand that many people will be unable to attend. That being said, we sill still be having this class at a later date, so keep your weekends open if you are planning to attend. The time (16:00 UTC) will remain the same. Daniel: I know I've said it many times on IRC, but congratulations on the job! [0]: https://mailman.archlinux.org/pipermail/aur-general/2013-March/022850.html Thank you, -- William Giokas | KaiSforza GnuPG Key: 0x73CD09CF Fingerprint: F73F 50EF BBE2 9846 8306 E6B8 6902 06D8 73CD 09CF

1 0

[arch-general] MaraDNS and Zonetransfer
by Δημήτρης Ζέρβας 27 Mar '13

27 Mar '13

I want am using MaraDNS and I want to enable zonetransfer. When I try to enable zonetransfer service via systemd, I get failed status and this in my messages.log: Mar 27 18:01:53 localhost systemd[1]: Starting Zone AXFR service for MaraDNS server... Mar 27 18:01:53 localhost systemd[1]: Started Zone AXFR service for MaraDNS server. Mar 27 18:01:53 localhost systemd[1]: zoneserver.service: main process exited, code=exited, status=3/NOTIMPLEMENTED Mar 27 18:01:53 localhost systemd[1]: Unit zoneserver.service entered failed state I am able to start zonetransfer with "duende zonetransfer -f /etc/mararc". Also, I am able to start zonetranfer via systemd when I bring maradns down, then if I start maradns I'll get the same errors in my messages.log BTW: journalctl is disabled because it was resource hungry. So, all messages go @/var/log/messages.log Thank you.

1 0

[arch-general] Question about mariadb replacing mysql
by Mike Cloaked 27 Mar '13

27 Mar '13

With the move to mariadb I have the following situation: I am not explicitely running mysqld so checking the status with systemctl shows it is inactive. However I am running KDE as my desktop. After doing the suggested install after ensuring that mysqld is stopped: pacman -S mariadb libmariadbclient mariadb-clients and accepting the install of these packages with removal of mysql equivalents, I then find that there is a private instance of mysql running by the KDE desktop: ps -eaf | egrep mysql mike 660 657 0 Mar23 ? 00:00:42 /usr/bin/mysqld --defaults-file=/home/mike/.local/share/akonadi/mysql.conf --datadir=/home/mike/.local/share/akonadi/db_data/ --socket=/home/mike/.local/share/akonadi/socket-home1/mysql.socket mike 9747 761 0 13:39 pts/3 00:00:00 egrep mysql So does any expert know whether a mysql_upgrade is necessary for KDE and if so how does one go about doing that upgrade? Thanks. -- mike c

4 9

[arch-general] Upgrade finish in a "Kernel Panic - not syncing : no init found"
by Dany De Bontridder 27 Mar '13

27 Mar '13

Hi, I reinstalled 2 weeks ago arch linux, because a pacman -Syu broke everything. Today, everything works fine and I decide to keep my PC up-to-date, so I run pacman -Syu and I get a message when trying to boot *** Kernel Panic - not syncing : No init found. *** Of course, because I saved the list of the packages before and after this upgrade, (with pacman -Qe) I tried to downgrade, but it doesn't work at all. I still have the same message error, I checked and changed the grub.cfg without no success : the rootfs is correct, the init is on /dev/sda2 (a link to /usr/lib/systemd/systemd) So I tried to append to vmlinuz line "init=3" "init=/sbin/init" "init=/usr/lib/systemd/systemd" ... Without any success even when downgrading the kernel version (from 3.8 to 3.7) I can of course reinstall everything but I prefer to avoid that, someone can help me please ??? I really don't understand what happened. Thanks in advance Dany

6 9

[arch-general] Broadcom B43 problems
by Magnus Therning 26 Mar '13

26 Mar '13

I have seen some indications that my Broadcom B43 *ought* to work with the kernel's b43 driver, but I've never managed to get it working on my own. I'd love to be able to switch away from the broadcom-wl package is possible. Using a kernel from a few days ago, 3.7.9 and the b43-firmware package from AUR I only get as far as connecting to my router (at least that's what NetworkManager says), but then I can't actually connect to any site. If I then bring down the network and then bring it back up again the connection to the router will fail (NetworkManager keeps asking for the password). Any suggestions on what might be causing this, and what I should try next? /M % lspci -nn|grep Broadcom 03:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Wireless network uses WPA2 -- Magnus Therning OpenPGP: 0xAB4DFBA4 email: magnus(a)therning.org jabber: magnus(a)therning.org twitter: magthe http://therning.org/magnus I invented the term Object-Oriented, and I can tell you I did not have C++ in mind. -- Alan Kay

8 13

[arch-general] strange behaviour of pacman, what did I do?
by Shridhar Daithankar 26 Mar '13

26 Mar '13

Hi I was updating an archroot, created with mkarchroot to play with lxc. I thought following would work but it was doing something else altogether ------------------------ [root@bheem lxc]# pacman -Su -c /var/cache/pacman/pkg/ --root=$PWD/server1 Cache directory: /var/cache/pacman/pkg/ Packages to keep: All locally installed packages Do you want to remove all other packages from cache? [Y/n] ^C Interrupt signal received ------------------------ I think I lost a few packages during this because following command lead to a 30MB worth of download. ------------------------ [root@bheem lxc]# pacman -Su --cachedir=/var/cache/pacman/pkg/ --root=$PWD/server1 ------------------------ What did pacman do the first time? The man page does not have bare -c option and it wasn't -Sc where it started cleaning the packages(or was it?) And just to be sure.. I wanted to run pacman on the host again.. and eh? I lost my synced dbs? Thats strange.. ------------------------ [root@bheem lxc]# pacman -Syu :: Synchronizing package databases... error: core.db appears to be truncated: 3990/0 bytes error: failed retrieving file 'core.db' from mirrors.kernel.org : Failed error: core.db appears to be truncated: 3990/0 bytes error: core.db appears to be truncated: 3990/0 bytes error: core.db appears to be truncated: 3990/0 bytes error: failed retrieving file 'core.db' from mirrors.easynews.com : Resolving timed out after 10000 milliseconds core is up to date 0.0 B 0.00B/s 00:00 [---------------------------------------------------------------------] 0% extra 1416.8 KiB 205K/s 00:07 [#####################################################################] 100% community 1917.7 KiB 206K/s 00:09 [#####################################################################] 100% :: Starting full system upgrade... there is nothing to do ------------------------ -- Regards Shridhar

2 2

[arch-general] Forward all PPTP VPN packets to another proxy?
by Bill Sun 26 Mar '13

26 Mar '13

Hi, Currently I have a arch linux server running PPTP VPN (for iOS devices only), and I forward all PPTP VPN packets to local eth0: iptables -A POSTROUTING -s <ip_addr_for_pptp> -o eth0 -j MASQUERADE Now I got a external proxy, and I want all the traffic currently through the PPTP VPN then through that extenal proxy (it's a http proxy, and requires authentication). If my description is confusing, please consult this chart: iOS --> Server 1 (PPTP VPN) --> Server 2 (http proxy, authentication required) --> Web Server {1,2} both have dedicated external IP address. I have root permission for Server 1, and nothing for Server 2 (except for the http proxy account). I'm thinking about running a http server that handles all the authentication for Server 2 (such as dante?), then forward all packets to that server (running in Server 1). But I don't know how to write corresponding iptables rules. So how to write such rules? Regards.

2 2

[arch-general] Bonding networks with netcfg
by Robbie Smith 25 Mar '13

25 Mar '13

So I’ve got access to two networks, a wireless one on wlan0 and a mobile broadband one (with a 3G modem) on ppp0, and both have a tendency to be rather unreliable. I decided to look up bonding the two, and while I can sometimes manage to enslave wlan0, ppp0 always fails. I’ve followed the information and guides from [1] and [2], as well as what Google could find (though most of the information there was seriously outdated). I did find a post on the BBS with exactly the same problem[3], and I tried what they had used, but it also failed. Is what I want to do even possible? [1] https://wiki.archlinux.org/index.php/Network#Bonding_or_LAG [2] https://wiki.archlinux.org/index.php/netcfg [3] https://bbs.archlinux.org/viewtopic.php?id=133890

3 3

[arch-general] Weird problem of ALPS v6 touchpad
by Hexchain Tong 23 Mar '13

23 Mar '13

Hi all, I'm using Archlinux on a Dell Inspiron 7420 laptop, which has an ALPS touchpad that doesn't have driver in kernel. Currently aur/psmouse-alps-driver provides support for it. But recently some weird problem happened. After I switch off touchpad using `synclient TouchpadOff=1`, it should be completely turned off. But when I wipe it with palm, the mouse pointer randomly moves and sometimes even clicks! In `xinput list` there is a strange "PS/2 mouse" device: ⎡ Virtual core pointer id=2 [master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] ⎜ ↳ RAPOO RAPOO 5G Wireless Device id=12 [slave pointer (2)] ⎜ ↳ AlpsPS/2 ALPS GlidePoint id=17 [slave pointer (2)] ⎜ ↳ PS/2 Mouse id=15 [slave pointer (2)] [..cut..] (The RAPOO is my USB mouse and it has nothing to do with the PS/2 device) I had to use xinput to disable the PS/2 device to stop the problem. Is there any other input device I don't know inside my laptop? Or, is it a bug? More info: $ dmesg | grep -i "ps/2" [ 2.497642] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.502081] mousedev: PS/2 mouse device common for all mice [ 15.025069] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input11 [ 226.680273] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input17 [ 226.698384] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input18

1 0

[arch-general] make/ execvp error : argument list is too long
by arnaud gaboury 22 Mar '13

22 Mar '13

Dear List, I have an issue since 5-10 days when building android from source, as when I have been building it for months with no problem. At one point in the building process, make will stop with this error: make: execvp: /bin/bash: Argument list too long After some search, I found this error is thrown by execvp(), following the errors specified in man execve(2). The execvpe() function appears in glibc. My glibc is the one from core, 2.17-3, and has been reinstalled. Building AUR packages don't give any error. The android ROM I am building is very closed to the android open source, and build fine on another machine (Linux Mint). So I suspect the problem comes from my box. The following line from android envsetup output puzzles me: HOST_OS_EXTRA=Linux-3.8.4-1-ARCH-x86_64-with-glibc2.2.5 What is this glibc2.2.5 ?? Thank you for any help. Regards.

2 5

[arch-general] community svntogit broken for a few days
by Armin K. 21 Mar '13

21 Mar '13

It just displays the same thing for some time ...

1 0

[arch-general] PPPoE server
by Pietro Paolini 21 Mar '13

21 Mar '13

Hello all, I installed successfully the roar-penguin pppoe-server and I try to use it without success, what I don't understand is that I put in my /etc/ppp/pppoe-server-options debug logfile /var/log/pppoe-server-log But that file is not created then I don't understand what happen and is really hard for me find a solution, do you know how can I enable the debugging ???!!! My problem is that I catch every time (Wireshark sniffing) the RP-PPPoE: Child pppd process terminated In the PADT message, any help ? Thanks in advance

1 0

[arch-general] More infos on failing archboot ISOs with Kernel Panic on start
by fredbezies 20 Mar '13

20 Mar '13

Some more infos. Only 32 bits versions seems to be working. I grabbed archlinux-2013.03-2-archboot-x86_64.iso, verified its checksum (which matches), and always I get : "Failed to execute /init" followed "Kernel Panic - not syncing : init not found". And I can see it with both qemu and VirtualBox. Need to make another round of dual and x86_64 archboot ISOs ? -- Frederic Bezies fredbezies(a)gmail.com

2 6

Re: [arch-general] [arch-dev-public] BIND10? No, thanks.
by Armin K. 20 Mar '13

20 Mar '13

On 03/20/2013 03:39 PM, Gaetan Bisson wrote: > [2013-03-20 15:14:19 +1100] Gaetan Bisson: >> Deprecation of bind and dnsutils > > I've just moved dnsutils to [extra] and orphaned it as well as bind. > This announcement is postponed as long as somebody can manage to keep > BIND alive... > Why not keep bind9? ... It has not been abandoned upstream and I see no conflicts between bind9 and bind10 - think gtk+2 and gtk+3 ... Both can exist on the same system, but I doubt that two bind daemons can run at the same time.

3 2

[arch-general] Future of dmraid on nvidia chipsets in Arch?
by David C. Rankin 20 Mar '13

20 Mar '13

Dave, All, After reading https://bugs.archlinux.org/task/31236, I am left with the question of "Can I move forward with Arch with my servers that have dmraid for / and /home with nvidia chipsets?" Thanks for the dmraid update dr, but will that package continue to be available? I have 3 dmraid production servers, all nvidia chipset based (reference https://wiki.archlinux.org/index.php/Installing_with_Fake_RAID) Bug 31236 addressed handling /home on dmraid, but excluded any discussion of / or /boot on dmraid. It also noted that the move from dmraid->mdraid was only supported for Intel chipset based controllers. Is there planned support for existing nvidia based dmraid arrays in Arch, whether by conversion to mdraid (when chipset support is available) or will the dmraid package (as patched by dreisner) continue to be available to support booting nvidia based systems under systemd? From a server standpoint (no dual-boot dmraid availability required), is the best long-term option to simply completely rebuild using mdraid (pure software raid) eliminating dmraid altogether? -- David C. Rankin, J.D.,P.E.

2 1

[arch-general] Hardlock after postfix/smtp entry in log - leaves 4 lost inodes each time - ideas?
by David C. Rankin 20 Mar '13

20 Mar '13

Guys, I have a server that will hardlock every week or two. The log entries always look the same. There is a postfix/smtp transaction in progress when the lock occurs. After the lockup you are dropped to maintenance mode on next reboot and there are always 4 inodes that are part of an orphaned link list that are fixed with fsck and then the machine reboot normally. The log entries just prior to the lockup look like this: Mar 17 16:07:16 phoenix postfix/anvil[26843]: statistics: max connection rate 1/60s for (smtp:213.199.243.30) at Mar 17 16:01:52 Mar 17 16:07:16 phoenix postfix/anvil[26843]: statistics: max connection count 1 for (smtp:213.199.243.30) at Mar 17 16:01:52 Mar 17 16:07:16 phoenix postfix/anvil[26843]: statistics: max cache size 1 at Mar 17 16:01:52 Mar 17 16:14:52 phoenix postfix/qmgr[1019]: 81963E9720: from=<inconsiderableka04(a)gil.com.au>, size=7485, nrcpt=1 (queue active) Mar 17 16:14:52 phoenix postfix/smtp[26899]: 81963E9720: to=<**snipped**(a)3111skyline.com>, relay=3111skyline.com[66.76.63.120]:25, delay=1118, delays=1118/0.02/0.16/0.17, dsn=4.7.1, status=deferred (host 3111skyline.com[66.76.63.120] said: 450 4.7.1 Client host rejected: cannot find your hostname, [66.76.63.60] (in reply to RCPT TO command)) Mar 18 07:34:19 phoenix kernel: [ 0.000000] Initializing cgroup subsys cpuset Mar 18 07:34:19 phoenix kernel: [ 0.000000] Initializing cgroup subsys cpu Mar 18 07:34:19 phoenix kernel: [ 0.000000] Linux version 3.4.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 I cannot find any connection between the postfix/smtp and the lockup searching the web. So I'm asking here, has anyone else seen a lockup where the last log entry is a postfix/smtp entry and then experienced a 4 orphaned inode error on reboot? This has occurred multiple times over the past year or so. memtest completes without error and the drives show no other errors or issues. Drive temps are stable at: /dev/sda: ST3250410AS: 35°C /dev/sdb: ST3250410AS: 39°C Any feedback welcomed. Otherwise, it looks like this has to be hardware. -- David C. Rankin, J.D.,P.E.

2 3

[arch-general] Installing by remote control
by David Benfell 20 Mar '13

20 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I'm currently running Arch Linux on a Linode. I'm happy--actually, real happy--with Arch, not so happy with the constraints I'm facing with the Linode. Casting about, I find Contabo in Germany. From them, I can get a dedicated server with lots more capacity for about the same cost (it'd actually go up a little because I'd solve a few other problems that doing this would bring within range). Unfortunately, they do not offer Arch Linux as an option. I sent their support team a message asking about this, and I've included their response below. It sounds like heartburn to me. I don't have a lot of experience installing Arch Linux (Linode *does* offer it as an option and I installed via Bridge Linux on my desktops). I'm hoping this isn't as weird as it sounds. (I've actually never heard of a KVMoIP.) Is what they're offering a reasonable proposition? How weird is it really? Thanks! - -------- Original Message -------- Subject: Re: [Ticket#2013031910000443] Arch Linux? Date: Tue, 19 Mar 2013 12:33:56 +0100 From: Contabo Support Team <support(a)contabo.com> Organization: Contabo GmbH To: benfell(a)parts-unknown.org Dear Mr Benfell, Thank you for your e-mail. Unfortunately, we can not offer you an automated installation of Arch Linux on our dedicated servers. But we could offer you to attach a KVMoIP and an USB drive with the installation media of Arch Linux to your server. This option is free of charge for a new dedicated server order and it would be possible for you to install your preferred Linux distribution by yourself. If you want to agree with this offer, please order the dedicated server on our website and add a note at the end of the ordering process about Arch Linux and the manual installation with the KVMoIP. http://contabo.com/?show=servers If you have any questions or need help, please do not hesitate to contact us. - -- Best regards, Stephan Forster Technischer Support / Technical support Contabo GmbH Aschauer StraÃe 32a 81549 MÃ¼nchen http://www.contabo.com E-mail: support(a)contabo.com Tel.: +49 (0) 89 3564717 70 Fax: +49 (0) 89 216 658 62 Visit us on Facebook: http://www.facebook.com/contaboCom Amtsgericht MÃ¼nchen HRB 180722 Authorized executives: Michael Herpich & Michael BÃ¶lke ___________________________________________________________ Please do not change the subject line of this e-mail. Only by this you make sure that your answer will not be out of context. Please direct all support issues directly to support(a)contabo.com . This will guarantee fastest processing possible. ___________________________________________________________ 19.03.2013 04:30 - David Benfell schrieb: > Hi, > > I am leaning in favor of renting a dedicated server from your > organization, but my preferred Linux distribution is > Arch--principally because it is a rolling distribution. > > I'm aware that a bleeding edge distribution is generally not > recommended for production servers, but I've had good luck with > Arch, and would prefer to stick with them. > > I do not see Arch among your offerings. Would it be possible to do > this? > > Thanks! > -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRSOEHAAoJELJhbl/uPb4SLSQP+wZk2Nk/b8UTUbjBON1jwOOs o47hcnxkXKj0E6tOlDwBd77/obpwOTTDgNCWRBICPQFLkiP3/MrDvNedsXmRg0Vj +TZuoyUs17bNzcMnQ+vRauAtsvsX7Np/iTU3+Brv60sDdBv/wh25b31SCDtIuEDJ LEKvC25LERywWiZIW1uEqwnblV/PpmK5MDyDKcghI1XWwd6jkYWOHNobhq2wBFbC dkqJS6uBTY3LOSmCb9fIAWpfN1qVw/r3KjOARIS2Shqm86ccYjcZlQBBp0RfFGvH EVh8iZJ3ONqWqgF1UHwiCn4hY9GCasRI91bqWHbx7FH/soIEW8SIAUDHirP/UUFk Yc8Ib7zAwq4WY2pBfcIOiAhdikyFw8R6fDWOWb7/kXTi27vg8uoiqcPekdq/1pfC JsCN/sLa4yNdYBDdOTCYxpx8DRPB9qyOWff5gD6bj5v6WDPsCG6xH4qO7SHBufiG OC/EClRJ85mvajdhwj76xqmOgX1b+UcOKvlxKcNsCjdUsxM6640XOzFrNd2Gd+0a n+KEh6Cj2nak9GVJWMWVzgRwu1W0W/d1x7BGEbPcVtnpBCK+X4A8ZrzEbTyz6QUq J9Qu6vdcOIqMpsjpNHqjRkAWFyLdDtXC1T0boR+QyjEWL2E/dJTiX6qqdof9SP77 1M80Ds7RhISExWZ/jk3Z =eCnQ -----END PGP SIGNATURE-----

3 4

[arch-general] Cannot boot archboot iso with 64 bits kernel : no init found.
by fredbezies 19 Mar '13

19 Mar '13

Hello. Either my ISO is busted or archboot ISO is in a bad shape. Every single time I try to boot archboot ISO in virtualbox, I got a kernel panic starting with a "Failed to execute /init" And then : "Kernel Panic - not syncing : No init found". Getting this with x86_64, x86_64 LTS. It works with both i686 options ! -- Frederic Bezies fredbezies(a)gmail.com

1 0

[arch-general] Is last archboot iso completely busted ?
by fredbezies 19 Mar '13

19 Mar '13

I was looking for an up-to-date archboot iso, and the last one is really broken. I'm speaking of archlinux-2013.03-1-archboot-dual.iso When I try to do a network based installation, package grabbing failed, with this error : errot : target not found : netctl. If I try doing a cdrom based installation, in configuration part, I cannot modify any single configuration file. I'm told they do not exist. Known bugs ? Busted ISO ? -- Frederic Bezies fredbezies(a)gmail.com

6 12

[arch-general] What changed dual-boot grub definition (hd0, 0) -> (hd0, 1)
by David C. Rankin 18 Mar '13

18 Mar '13

All, Just a note. After working through the update that brought in systemd, a final issue is that somehow the drive designation for grub (legacy) for the windows partition was changed from (hd0,0) to (hd0,1). This box is a simple old dell box with a single 500G drive. Windows has 80G and the rest in Arch. The dual boot for windows definition in grub menu.lst has always been: title Windows rootnoverify (hd0,0) makeactive chainloader +1 'cat /proc/partitions' showed sda and then sda2 as the first primary partition. sda1 was no longer created by the system. Is there some reason that sda1 would be completely missing on the system where it had always been there before? This required the corresponding change of the menu.lst definition to: title Windows rootnoverify (hd0,1) makeactive chainloader +1 While the fix is simple, what caused the loss of sda1 in the first place? This box has booted Arch and then XP as (hd0,0) since 2009. Now it requires (hd0,1). Is this related to the same udev issue that caused eth0 -> enp2s0? If so, can I rely on it staying sda2 going forward or do I need another softlink in /etc/udev/rules.d to make it so? -- David C. Rankin, J.D.,P.E.

3 2

[arch-general] Device "eth0" does not exist - how to bring up?
by David C. Rankin 18 Mar '13

18 Mar '13

All, After update that installed systemd, chrooting the system successfully starts the network and eth0 is present. However, when booting natively to the system no eth0 is present. Attempting /etc/rc.d/network restart results in "Device eth0 does not exist." According to https://wiki.archlinux.org/index.php/Systemd, until I append init=/usr/lib/systemd/systemd to the kernel line and reboot, the system should still process the initscripts normally. However this does not occur. 'cat /proc/1/comm' still shows 'init' so I cannot figure out why I do not have an eth0. Appending init=/usr/lib/systemd/systemd does bring up systemd and the system boots until X starts and the system hangs. It still responds to ctrl+alt+del, but will not switch to the graphical interface. It is just stuck. Is there a way to bring eth0 up under the old initscripts until I get the X hang sorted out? -- David C. Rankin, J.D.,P.E.

4 4

[arch-general] rpmdb: PANIC
by Ralf Mardorf 18 Mar '13

18 Mar '13

For this update [1] I got the PANIC the first time. If I install and remove leafpad, as a test, everything is ok. If I re-install linux, I get the PANIC messages too. Is DKMS broken? I need it to build Vbox modules for linux-rt. Regards, Ralf [1] [root@archlinux rocketmouse]# pacman -Syu :: Synchronizing package databases... core 105.1 KiB 501K/s 00:00 [######################################] 100% extra is up to date community 1938.1 KiB 583K/s 00:03 [######################################] 100% multilib is up to date :: Starting full system upgrade... resolving dependencies... looking for inter-conflicts... Targets (7): acpid-2.0.18-2 gettext-0.18.2.1-1 gpgme-1.3.2-1 libassuan-2.1.0-1 virtualbox-4.2.10-1 virtualbox-host-dkms-4.2.10-1 virtualbox-host-modules-4.2.10-1 Total Download Size: 16.67 MiB Total Installed Size: 90.00 MiB Net Upgrade Size: -5.97 MiB Proceed with installation? [Y/n] :: Retrieving packages from core... gettext-0.18.2.1-1-x86_64 2.1 MiB 582K/s 00:04 [######################################] 100% gpgme-1.3.2-1-x86_64 197.8 KiB 593K/s 00:00 [######################################] 100% libassuan-2.1.0-1-x86_64 77.8 KiB 599K/s 00:00 [######################################] 100% :: Retrieving packages from community... acpid-2.0.18-2-x86_64 44.0 KiB 613K/s 00:00 [######################################] 100% virtualbox-host-dkms-4.2.10-1-x86_64 483.0 KiB 589K/s 00:01 [######################################] 100% virtualbox-host-modules-4.2.10-1-x86_64 157.1 KiB 591K/s 00:00 [######################################] 100% virtualbox-4.2.10-1-x86_64 13.7 MiB 586K/s 00:24 [######################################] 100% (7/7) checking package integrity [######################################] 100% (7/7) loading package files [######################################] 100% (7/7) checking for file conflicts [######################################] 100% (7/7) checking available disk space [######################################] 100% (1/7) upgrading acpid [######################################] 100% (2/7) upgrading gettext [######################################] 100% (3/7) upgrading gpgme [######################################] 100% (4/7) upgrading libassuan [######################################] 100% rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x1cbb870, PANIC(0), 0x7fffb2b09f5c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x1cbb870, PANIC(0), 0x7fffb2b09f5c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x2581870, PANIC(0), 0x7fff646adabc) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x2581870, PANIC(0), 0x7fff646adabc) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x8f8870, PANIC(0), 0x7fff7f35695c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x8f8870, PANIC(0), 0x7fff7f35695c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0xd0a870, PANIC(0), 0x7fff24fbcd8c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0xd0a870, PANIC(0), 0x7fff24fbcd8c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery /usr/sbin/dkms: line 1873: echo: write error: Broken pipe /usr/sbin/dkms: line 1875: echo: write error: Broken pipe /usr/sbin/dkms: line 1873: echo: write error: Broken pipe /usr/sbin/dkms: line 1875: echo: write error: Broken pipe /usr/sbin/dkms: line 1873: echo: write error: Broken pipe /usr/sbin/dkms: line 1875: echo: write error: Broken pipe /usr/sbin/dkms: line 1873: echo: write error: Broken pipe /usr/sbin/dkms: line 1875: echo: write error: Broken pipe (5/7) upgrading virtualbox-host-dkms [######################################] 100% warning: directory permissions differ on usr/src/ filesystem: 775 package: 755 rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x11b0870, PANIC(0), 0x7fffc320044c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x11b0870, PANIC(0), 0x7fffc320044c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x1aac870, PANIC(0), 0x7fffb5e04d0c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x1aac870, PANIC(0), 0x7fffb5e04d0c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0xb87870, PANIC(0), 0x7fff5224972c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0xb87870, PANIC(0), 0x7fff5224972c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x1613870, PANIC(0), 0x7fff092c465c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery rpmdb: /var/lib/rpm/./log: No such file or directory rpmdb: PANIC: No such file or directory ==> rpmdbe_event_notify(0x1613870, PANIC(0), 0x7fff092c465c) app_private (nil) rpmdb: unable to join the environment error: db_init:db3.c:1009: dbenv->open(-30973): DB_RUNRECOVERY: Fatal error, run database recovery Creating symlink /var/lib/dkms/vboxhost/4.2.10/source -> /usr/src/vboxhost-4.2.10 DKMS: add completed. ==> To build and install your modules run: dkms install vboxhost/4.2.10 ==> To do this automatically at startup run: systemctl enable dkms.service (6/7) upgrading virtualbox-host-modules [######################################] 100% In order to use the new version, reload all virtualbox modules manually. (7/7) upgrading virtualbox [######################################] 100%

1 1

[arch-general] Package Maintenance Classroom (31/3/2013)
by William Giokas 18 Mar '13

18 Mar '13

All, At the end of this month Daniel Wallace (gtmanfred) and I will be giving a classroom on basic package maintenance. From the forum post[1]: > And now we have planned our first actual class: A Beginners Guide to > Package Maintaining. > > This will be taught by gtmanfred and myself Sunday, March 31st at 16:00UTC > in the #archlinux-classroom channel. There is already an Arch Wiki[2] page > about this class listing the requirements and lesson plans. This class will > be broken into separate lessons, the first being a simple introduction with > guided practice and explanations. We will be covering more advanced topics > later on. Even if you are not new to package maintenance, we would like to > see you there for support and just in case/when we get things wrong you can > correct us. We will also be covering the new functions and uses of pacman > 4.1, currently in the rc stage, particularly its use with version control > sources and development packages in the later lessons. > > There will be a pdf file released when the class begins so that you can > follow along. We will be releasing an info document too, for those of you > that do not use X but still want to follow along. > > Thank you, and we hope to see you there! > > If you have any questions about the requirements or prerequisites, then > please ask on the IRC channel. We will be glad to clear things up. If you are interested, please reply or post on the forums so we know about how many people we're going to have to help. Thank you, -- William Giokas | KaiSforza GnuPG Key: 0x73CD09CF Fingerprint: F73F 50EF BBE2 9846 8306 E6B8 6902 06D8 73CD 09CF [1]: https://bbs.archlinux.org/viewtopic.php?pid=1243733#p1243733 [2]: https://wiki.archlinux.org/index.php/Beginners_Guide_to_Package_Maintaining

5 4

[arch-general] SOLVED Re: Cannot chroot '/bin/bash': No such file or directory
by David C. Rankin 17 Mar '13

17 Mar '13

On 03/06/2013 08:24 PM, Ross Hamblin wrote: > On 07/03/13 14:32, David C. Rankin wrote: >> Guys, >> >> Attempting to fix the test box that updating left unable to boot, I cannot >> chroot to fix the system. I've booted from the install medium and done the >> normal mount of the existing system under /mnt: >> >> mount /dev/sda6 /mnt >> mount /dev/sda5 /mnt/home >> mount /dev/sda8 /mnt/boot >> mount -o bind /dev /mnt/dev >> mount -t proc none /mnt/proc >> mount -t sysfs none /mnt/sys >> >> All files appear in their proper place under /mnt. However, attempting to >> create the chroot fails: >> >> cd /mnt >> chroot /mnt /bin/bash >> >> chroot: failed to run command '/bin/bash': No such file or directory >> >> /bin/bash is in the new location /usr/bin/bash (moved from /bin/bash by the >> update) with with a proper symlink in /mnt/bin/bash pointing to ../usr/bin/bash >> >> This if the first time I've ever had difficulty chrooting a system. I suspect >> that this is caused by the last update that pulled in systemd which left the >> system unbootable. Anyone know what could be causing the chroot failure? I've >> tried explicitly pointing the chroot to ./usr/bin/bash, etc... and tried it >> without any executable specified. Regardless, I get the same "No such file or >> directory". >> >> Thanks in advance for any help or link you can provide. >> > It's been a while now but ISTR this message when chroot from 32 bit host > and 64 bit target, or maybe it was vice versa. > > HTH > Ross. > All, The problem with the update (11/20/12 -> 2/5/13) appears to be that the update of filesystem (or something) removed the /lib -> /usr/lib link from the / directory causing much of the update to fail. This apparently is a problem for boxes that haven't been updated in a few months. The last system update before the one on 2/5/13 was on 11/20/12. The pacman.log contains hints of where the problem began. Specifically, from the pacman.log file I have: [2013-02-05 23:45] synchronizing package lists [2013-02-05 23:45] starting full system upgrade [2013-02-05 23:53] removed eject (2.1.5-7) [2013-02-05 23:53] userdel: user dbus is currently used by process 452 [2013-02-05 23:53] groupdel: cannot remove the primary group of user 'dbus' [2013-02-05 23:53] removed dbus-core (1.6.4-1) <snip> (don't know if this is important -- repeated twice in log) [2013-02-05 23:53] /usr/bin/gconftool-2: error while loading shared libraries: libdbus-1.so.3: cannot open shared object file: No such file or directory [2013-02-05 23:53] /usr/bin/gconftool-2: error while loading shared libraries: libdbus-1.so.3: cannot open shared object file: No such file or directory <snip> [2013-02-05 23:53] upgraded linux-api-headers (3.5.1-1 -> 3.7.4-1) [2013-02-05 23:53] upgraded tzdata (2012e-1 -> 2012j-1) [2013-02-05 23:53] warning: /etc/gshadow installed as /etc/gshadow.pacnew [2013-02-05 23:53] warning: /etc/passwd installed as /etc/passwd.pacnew [2013-02-05 23:53] warning: /etc/group installed as /etc/group.pacnew [2013-02-05 23:53] warning: /etc/fstab installed as /etc/fstab.pacnew [2013-02-05 23:53] warning: /etc/shadow installed as /etc/shadow.pacnew [2013-02-05 23:53] upgraded filesystem (2012.8-1 -> 2013.01-3) [2013-02-05 23:53] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew [2013-02-05 23:53] call to execv failed (No such file or directory) [2013-02-05 23:53] upgraded glibc (2.16.0-4 -> 2.17-3) [2013-02-05 23:54] call to execv failed (No such file or directory) [2013-02-05 23:54] upgraded bash (4.2.037-1 -> 4.2.042-3) [2013-02-05 23:54] call to execv failed (No such file or directory) I don't know if it was the filesystem package or not, but after the filesystem install, there are many of the "call to execv failed (No such file or directory)" errors noted. After working with the chroot error a bit I stumbled across the fact that link for /lib was missing. After manually creating the link again, chroot worked like a champ. I don't know how much of the system got borked as a result, but a fresh pacman -Syu complete normally. I have not finished examining the system yet, so I have not attempted to boot to the new kernel. I will have to go through and verify the grub legacy config before I reboot. I'll report back after I have had an opportunity to test the box. Thank you to those that responded. -- David C. Rankin, J.D.,P.E.

6 6

Re: [arch-general] [arch-dev-public] Xorg-server 1.14 hitting testing
by Martti Kühne 17 Mar '13

17 Mar '13

On 3/16/13, Pierre Schmitz <pierre(a)archlinux.de> wrote: > Am 16.03.2013 10:05, schrieb Andreas Radke: >> I'd like to move Xorg 1.14 pretty soon, best would be together with >> the kernels. It's up to you whether you want to announce to hold the >> update for catalyst users or remove it from the repos. > > I just noticed that Virtualbox does not work with the latest > xorg-server due to ABI mismatch. Is this known? It's possible that > rebuildig the driver might fix this. > > -- > Pierre Schmitz, https://pierre-schmitz.com > When I checked, this was basically waiting to come from upstream.

1 0

[arch-general] Svntogit doesn't show new entries
by Armin K. 16 Mar '13

16 Mar '13

Last commits are 26 hours ago

1 1

Re: [arch-general] [arch-dev-public] linux-3.8.3-1 ready for core?
by Genes Lists 16 Mar '13

16 Mar '13

On 03/16/2013 02:43 AM, Tobias Powalowski wrote: > Ah this is a kernel issue I experience this too on my laptop with intel > graphics. > > greetings > tpowa Could this be related? https://lkml.org/lkml/2013/3/14/540 Gene

1 0

Re: [arch-general] [arch-dev-public] linux-3.8.3-1 ready for core?
by Leonid Isaev 15 Mar '13

15 Mar '13

On Fri, 15 Mar 2013 18:14:26 +0000 Lukas Jirkovsky <l.jirkovsky(a)gmail.com> wrote: > On 15 March 2013 17:58, Lukas Jirkovsky <l.jirkovsky(a)gmail.com> wrote: > > I've just updated the kernel and some mesa packages and the screen > > detection in KDE is now broken. On startup it detects that there's a > > VGA connected and sets my laptop screen to 1024x768 to match detected > > VGA output even though there's nothing connected. I'll try to find > > which package causes later. > > > > Otherwise no issues so fat. > > Yup, it's the kernel. Downgrade to 3.8.2 fixed the problem. I'll try > to get some info and report it to the bugtracker. > > Lukas Please note that you don't even need X to see this. On my i915 system, _in tty_ the entire screen is shifted up, so I can't use last several lines of the display. -- Leonid Isaev GnuPG key: 0x164B5A6D Fingerprint: C0DF 20D0 C075 C3F1 E1BE 775A A7AE F6CB 164B 5A6D

1 0

[arch-general] error during update of qt4 and qt5
by phani 15 Mar '13

15 Mar '13

pacman wanted to update some qt4 and qt5 packages, but this didn't work because of the following error: error: failed to commit transaction (conflicting files) /usr/share/applications/assistant.desktop exists in both 'qt4' and 'qt5-tools' /usr/share/applications/designer.desktop exists in both 'qt4' and 'qt5-tools' /usr/share/applications/linguist.desktop exists in both 'qt4' and 'qt5-tools' seems both qt versions are trying to provide .desktop files with the same name. what to do about this? -- phani.

3 4

[arch-general] Western Digital external drives
by Ralf Mardorf 15 Mar '13

15 Mar '13

Hallo, I'm aware that there's an Arch Wiki about WD drives. However, I need to know if something is bad with Linux or a brand new WD drive. In the German WD forms I got a reply, with the claim, that once a WD Elements is spin down, it will park, _not_ spin up again, if there's no access. For my updated Arch Linux, 64-bit with current kernel and current kernel-rt, running current Xfce 4 the drive does spin down and up again and again even when _no_ partition is mounted, I'm running a Xfce 4 session without an application launched, while I don't use the computer. So with completely no access by me, - Arch Linux _does_ access the drive, even if no partition is mounted - or I got a brand new drive that's broken and should make use of the warranty How can I find out, if there's something fishy with my Arch Linux or if the drive is broken? Any ideas? Regards, Ralf

3 4

Re: [arch-general] Realtek wifi won't come up
by M0r S 14 Mar '13

14 Mar '13

On Tuesday, March 12, 2013, M0r S <m0rtiferrimus(a)gmail.com> wrote: > > > On Tuesday, March 12, 2013, Jameson <imntreal(a)gmail.com> wrote: >> On Fri, Mar 8, 2013 at 8:51 PM, M0r S <m0rtiferrimus(a)gmail.com> wrote: >>> >>> Hey everyone, >>> I'm trying to install Arch. The first time I tried installing everything >>> worked fine, even the wifi, which usually doesn't work with linux. However, >>> my laptop battery died in the middle of downloading packages because I was >>> careless and hadn't plugged it in. >>> Now, when I enter "ip link set wlp2s0f0 up", it doesn't set the interface >>> up. Strangely, when I reboot, the interface is renamed to wlan0 (that's >>> what it was when the wifi worked), even though the wiki says it shouldn't. >>> Running "modprobe -r rtl8192ce && modprobe rtl8192ce" changes the interface >>> name to wlp2s0f0. "ip link" gives me (besides the lo interface) >>> 3: wlp2s0f0: <BROADCAST, MULTICAST> mtu 1500 qdisc nook state DOWN mode >>> DEFAULT qlen 1000 link/ether 00:e0:4c:81:92:53 brd ff:ff:ff:ff:ff:ff >>> Before, it gave me: >>> 2: wlan0: <NO-CARRIER, BROADCAST, MULTICAST, UP> mtu 1500 qdisc mq state >>> DOWN mode DEFAULT qlen 1000 link/ether 24:ec:99:4c:60:1f brd >>> ff:ff:ff:ff:ff:ff >>> What else can I try? Lspci and dmesg show that the firmware has been loaded >>> and that the card has been recognized. >> >> The first thing I would try would be to move >> /etc/udev/rules.d/network_persistent.rules to root's home directory, >> and reboot. That way you should wind up with the wlp2s0f0 name >> whether it's working or not, otherwise. >> >> =-Jameson > > Fixed at: https://bbs.archlinux.org/viewtopic.php?id=159295 > > -Josh Fixed. I explain how the problem was fixed in post number 20. Here is the link to the thread: https://bbs.archlinux.org/viewtopic.php?id=159295

1 0

[arch-general] Zsh, tmux, and paths
by Manolo Martínez 14 Mar '13

14 Mar '13

Hello, I've noticed that, if one modifies the PATH environment variable in .zshenv, tmux fails to notice this. That is, `echo $PATH` yields different results within and without tmux, with the former being the default path, and the latter the path as modified by .zshenv. When I update PATH in .zshrc, though, it is picked up fine by tmux. I don't know what to make of this, but I've noticed the following, which might be related. If I undertand it correctly, zhs: * First sources .zshenv * Then sources /etc/zsh/zprofile * Then .zshrc In the second step, /etc/zsh/zprofile sources /etc/profile, which changes the path back to the default. Might this be the reason why tmux picks .zshrc path changes up correctly, but not .zshenv path changes? Cheers, Manolo --

3 3

Re: [arch-general] [arch-dev-public] BIND10? No, thanks.
by Leonid Isaev 13 Mar '13

13 Mar '13

On Sat, 9 Mar 2013 13:27:42 +1100 Gaetan Bisson <bisson(a)archlinux.org> wrote: > Hi guys, > > Currently we use the BIND code base in two packages: > - dnsutils from [core] provides basic DNS query tools; > - bind from [extra] is the actual name server. > > With the new BIND10 release, the ISC really outdid themselves: all > formerly standalone tools have been merged and rewritten as a python > script which uses bindings to the new libb10-* series of libraries that > are shared with the name server. Python being such a boring dependency, > they introduced another three: botan, log4cplus, and boost! > > That mostly means two things: > - We cannot keep splitting dnsutils and bind anymore. > - I do not want to maintain these packages any further. > > We already have ldns in [core], a much better written (and sane) DNS > library which includes query tools that are near drop-in replacements > for BIND's: use `drill` instead of `dig`, etc. > > So I suggest: > - Any package relying on dnsutils and its tools (dig, host, nslookup) be > ported to use ldns instead - should be straightforward in most cases. > - We ditch dnsutils and bind out of our repos, unless somebody finds > them fun and wants to maintain them in [extra] or [community]. > > Comments or suggestions are welcome. > > Cheers. > Great. I was actually going to open a feature request for this on flyspray. The only thing: whouldn't one need community/unbound (unbound-host AFAIR) to replace nslookup? -- Leonid Isaev GnuPG key: 0x164B5A6D Fingerprint: C0DF 20D0 C075 C3F1 E1BE 775A A7AE F6CB 164B 5A6D

3 4

[arch-general] AUR app Frescobaldi not working due to bug in current PyQt version
by Sébastien Leblanc 13 Mar '13

13 Mar '13

Hi there, I recently updated my machine and found out that a Python AUR app named Frescobaldi would no longer run on my system. I contacted the developer (wbsoft) and we tracked down the issue to a PyQt bug in which a tokenizer for syntax highlighting and parsing does not cache its response, leading to a method getting executed around 50,000 times for every line of text, instead of once. Wbsoft also confirmed that this bug affected other Python IDE-like apps built on PyQt. Another issue related to that bug is the score wizard (in Tools > Setup new score) not generating a score (try the preview button). Wbsoft contacted developers at Riverbank Software (PyQt upstream) and we got a reply that it would be fixed in yesterday's nightly snapshot. (which they did in changeset 1723f580e589 in the "ChangeLog-snapshot-*" page at http://www.riverbankcomputing.com/static/Downloads/PyQt4/) I tried to modify the PyQt PKGBUILD to use that snapshot but I was unable to finally make it work (it seems that on my build, the QtCore library is not linking against libpython2.7 as it is missing some symbols pertaining to PyUnicode functions or types on runtime). Is anyone able to patch PyQt with these fixes? I have the "1723f580e589" tarball on my system, if anyone needs it. Thanks for help! https://github.com/wbsoft/frescobaldi/issues/100 -- Sébastien Leblanc

1 0

[arch-general] can't publish keys to network? What?
by David Benfell 13 Mar '13

13 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I wish I could ask this question intelligently. But I am clueless. I'm using the Cinnamon desktop manager. Whenever I log in, I get a message in the upper left hand corner that claims it "can't publish keys to the network." I haven't seen this with other desktop managers: I've played with Openbox and GNOME. I have no idea what *it* is. I have no idea what *keys* it is talking about--I hope it isn't trying to publish private keys that should be kept secret. And I have no idea what functionality I'm losing as a result. Can someone shed some light? Thanks! -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRPrcaAAoJELJhbl/uPb4SoLUP+gL1Kt3Cvus1svntKgG0mxvY UuZBAXrqIYf5aW6sBrlftIVCreHM5S3Iay1YqSisv2tTVj4QS3L/tMi5QnEZdkGp FtbtCnDDDLijnL5NmKEBFlsFT7ttm7QcuCsXmo3atbdDQCMgHY7iLh2UgVWA9u31 Y1ZX5jRKz7+/S+TqUdk1/pJXn0ScAgB0uwUMdwb3HFqE7Fo8uoTt2v6/vwaUFN/+ IxSuOgqxFPJjJ7qFEyZtGwnxS3WtTxCUOdOU7ovl5aUsFQYiAb5rubyQv5AEnbEF 7ljyHIj0fJnoJdWQvfZQJ5Tr/m/B5yKpsjM9byAOvfXefVxtcFSdtsrKnvTSXpKB 0bON/3EeNx5B/sgGVCfh4DB+3JZcSqzxAFF8XNBCgsI5yr3nNeI3iu/nOJ5SIknd /mFoAoopy2bbA6AanqyC2rvUFbqYvxsrEbvuh/BPjQF11lwv5MYY+5PUFKYbf8va YzMKac6tCklIW749SIoX4+s54EzgUrgkPFo2w5zLFGWuFZsWWbmEFEnS9mcHKYXW ivZ3HJAT0rH3pAISwhhHhktejKhMQ6lnKFsFQllsluJCKoANmMzT6PrGVFFh8Ps9 G/2RtOGycQ/t1pvsPTiVQGZDNQFxYReJpfa9KVvCRtTJtBLaAoUfsN/FAxMaL2Fj X1PFmSMldfN9VxCJOmka =3wyG -----END PGP SIGNATURE-----

2 2

[arch-general] Realtek wifi won't come up
by M0r S 12 Mar '13

12 Mar '13

Hey everyone, I'm trying to install Arch. The first time I tried installing everything worked fine, even the wifi, which usually doesn't work with linux. However, my laptop battery died in the middle of downloading packages because I was careless and hadn't plugged it in. Now, when I enter "ip link set wlp2s0f0 up", it doesn't set the interface up. Strangely, when I reboot, the interface is renamed to wlan0 (that's what it was when the wifi worked), even though the wiki says it shouldn't. Running "modprobe -r rtl8192ce && modprobe rtl8192ce" changes the interface name to wlp2s0f0. "ip link" gives me (besides the lo interface) 3: wlp2s0f0: <BROADCAST, MULTICAST> mtu 1500 qdisc nook state DOWN mode DEFAULT qlen 1000 link/ether 00:e0:4c:81:92:53 brd ff:ff:ff:ff:ff:ff Before, it gave me: 2: wlan0: <NO-CARRIER, BROADCAST, MULTICAST, UP> mtu 1500 qdisc mq state DOWN mode DEFAULT qlen 1000 link/ether 24:ec:99:4c:60:1f brd ff:ff:ff:ff:ff:ff What else can I try? Lspci and dmesg show that the firmware has been loaded and that the card has been recognized. Thanks! Josh

2 1

[arch-general] Optirun sees no mouse, refuses to load
by Szymon Szydełko 12 Mar '13

12 Mar '13

Hi archers, I've been runing AL for some time, and, after more games has been added to steam lib, play them. So I've moved to bumlebee setup, in order to exploit my beefy GFX 660. Well, that's what I've got: szymon@arch /etc/X11/xorg.conf.d % optirun -vv glxgears [ 2103.749413] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf [ 2103.750131] [DEBUG]optirun version 3.1 starting... [ 2103.750178] [DEBUG]Active configuration: [ 2103.750206] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf [ 2103.750234] [DEBUG] X display: :8 [ 2103.750262] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee [ 2103.750300] [DEBUG] Socket path: /var/run/bumblebee.socket [ 2103.750341] [DEBUG] Accel/display bridge: auto [ 2103.750372] [DEBUG] VGL Compression: proxy [ 2103.750433] [DEBUG]Using auto-detected bridge virtualgl [ 2103.787266] [INFO]Response: No - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0) [ 2103.787296] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0) [ 2103.787311] [DEBUG]Socket closed. [ 2103.787331] [ERROR]Aborting because fallback start is disabled. [ 2103.787343] [DEBUG]Killing all remaining processes. O RLY, no mouse module? Now, a bit stripped inxi output: szymon@arch ~ % inxi -v 4 System: Host: arch.local Kernel: 3.8.2-1-ck x86_64 (64 bit, gcc: 4.7.2) Desktop: KDE 4.10.1 (Qt 4.8.4) Distro: Arch Linux Machine: System: LENOVO product: Lenovo IdeaPad Y580 version: Lenovo IdeaPad Y580 Mobo: LENOVO model: Product Name version: Mainboard version Bios: LENOVO version: 5DCN38WW(V2.05) date: 06/26/2012 CPU: Dual core Intel Core i5-3210M CPU (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9980.7 Clock Speeds: 1: 1200.00 MHz 2: 1200.00 MHz 3: 1200.00 MHz 4: 1200.00 MHz Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0 Card-2: NVIDIA Device 0fd4 bus-ID: 01:00.0 X.Org: 1.13.3 drivers: intel (unloaded: vesa) Resolution: 1366x768(a)60.0hz GLX Renderer: Mesa DRI Intel Ivybridge Mobile GLX Version: 3.0 Mesa 9.1 Direct Rendering: Yes Network: Card-1: Intel Centrino Wireless-N 2200 driver: iwlwifi ver: in-tree: bus-ID: 03:00.0 IF: wlan0 state: up mac: xx:xx:xx:xx:xx:xx What I do wrong? Cheese, Pizza & Tacos Szymon Szydełko PS. I haven't any video "Driver" clauses in xorg.conf.d - there are only evdev and synaptics references. PPS. I use nvidia-bumblebee-ck driver and corresponding kernel, but on arch' mainline, everything is the same.

4 12

Re: [arch-general] [arch-dev-public] Xorg-server 1.14 hitting testing
by Genes Lists 10 Mar '13

10 Mar '13

FYI - installed on 2 machines (intel graphics) - one laptop one desktop. No issues to report. Thank you. gene

1 0

[arch-general] RFID - 1. reader driver, 2. alien package for an app
by Ralf Mardorf 10 Mar '13

10 Mar '13

Hi, the first issue is the driver: # lsusb Bus 005 Device 002: ID 04e6:5292 SCM Microsystems, Inc. SCL011 RFID reader # sudo pcscd -f 00000000 dyn_unix.c:37:DYN_LoadLibrary() /usr/lib/pcsc/drivers/SCL011.bundle/Contents/Linux/libSCL011.so.2.06: libusb-0.1.so.4: cannot open shared object file: No such file or directory 00000098 readerfactory.c:985:RFInitializeReader() RFLoadReader failed: 0xFFFFFFFF80100014 00000070 readerfactory.c:312:RFAddReader() SCL011 Contactless Reader [SCL01x Contactless Reader] (21161049211487) init failed. 00000035 hotplug_libudev.c:384:HPAddDevice() Failed adding USB device: SCL011 Contactless Reader The readers LED isn't on. I wonder what to run as a replacement for # /etc/rc.d/pcscd start. The second issue is the application: Is there a way to convert packages for other distros to Arch packages or to directly install files from a package? man alien says -d, --to-deb Make debian packages. This is the default. -r, --to-rpm Make rpm packages. -t, --to-tgz Make tgz packages. --to-slp Make slp packages. -p, --to-pkg Make Solaris pkg packages. -i, --install Automatically install each generated package, and remove the package file after it has been installed. Available are packages for Ubuntu ≥ 10.04, Debian ≥ 6 and for openSUSE ≥ 11.4 https://www.ausweisapp.bund.de/pweb/filedownload/download_pre.do I tried the Ubuntu packages with # alien --scripts -vkt AusweisApp_010900_i686.deb # alien --scripts -vkt AusweisApp_IntegrityTool_010900_i686.deb But I don't know what to do with the tgz files ;). FWIW # alien --scripts -vkti AusweisApp_IntegrityTool_010900_i686.deb Sorry, I cannot install the generated .tgz file because /sbin/installpkg is not present. You can use tar to install it yourself. Extracting the TGZ isn't a help :S. I want to use the RFID chip from the German ID card, that's why I want to install this app. Regards, Ralf

1 1

Re: [arch-general] [arch-dev-public] BIND10? No, thanks.
by Genes Lists 10 Mar '13

10 Mar '13

On 03/08/2013 09:27 PM, Gaetan Bisson wrote: > Hi guys, > > Currently we use the BIND code base in two packages: > - dnsutils from [core] provides basic DNS query tools; > - bind from [extra] is the actual name server. ... > > We already have ldns in [core], a much better written (and sane) DNS > library which includes query tools that are near drop-in replacements > for BIND's: use `drill` instead of `dig`, etc. > Hi One observation - bind is the de facto standard and as far as I can tell used by the majority of the root servers [1] (and the majority of all major DNS servers according to wikipedia [2] and bind website [3] anyway :-)). We may want to be cautious stepping away from the dominant DNS software unless there is a sea change for the DNS community to do same. A casual look around [4] - so clearly I am not in the know here - but the rewrite seems not dissimilar to the postfix "re-write" of sendmail - modularity and security seemingly key goals. [5] Anyway, I'd encourage that we try and stick with bind. gene [1] http://en.wikipedia.org/wiki/Root_name_server [2] http://en.wikipedia.org/wiki/BIND [3] https://www.isc.org/wordpress/software/bind10/ [4] http://bind10.isc.org/wiki/DesignOverview [5] I am not familliar with ldns or it's benefits - security or other so I don't feel entitled to an opinion.

3 3

[arch-general] nouveau or kernel which one ?
by P .NIKOLIC 09 Mar '13

09 Mar '13

Hi for the last 3 kernels i have been getting errors and hangs that ultimately end in a completely frozen system this is the error that appears in the in the log Mar 07 11:00:43 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 4 Get 0xfffffffffc Put 0x0000fffff8 IbGet 0x000001fe IbPut 0x000001ff State 0xc0040022 (err: MEM_FAULT) Push 0x00400040 Mar 07 11:45:27 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x002002893c Put 0x0020029774 IbGet 0x0000035a IbPut 0x0000035b State 0x80004861 (err: INVALID_CMD) Push 0x00400040 Mar 07 11:54:36 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 4 Get 0xfffffffffc Put 0x0000fffff8 IbGet 0x00000237 IbPut 0x00000238 State 0xc0040022 (err: MEM_FAULT) Push 0x00400040 Mar 07 12:00:14 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x002002bd20 Put 0x002002bd80 IbGet 0x000002ff IbPut 0x00000300 State 0xc0000020 (err: MEM_FAULT) Push 0x00400040 Mar 07 12:16:33 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x002002d538 Put 0x002002d554 IbGet 0x00000243 IbPut 0x00000244 State 0x80000314 (err: INVALID_CMD) Push 0x00400040 Mar 07 12:21:09 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020035140 Put 0x002003af14 IbGet 0x00000362 IbPut 0x00000365 State 0x80004861 (err: INVALID_CMD) Push 0x00400040 Mar 07 12:25:06 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020030ad4 Put 0x0020030b8c IbGet 0x000001bc IbPut 0x000001bf State 0xc0000020 (err: MEM_FAULT) Push 0x00400040 Mar 07 12:25:42 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020037348 Put 0x0020037e78 IbGet 0x0000035a IbPut 0x0000035b State 0xc0004861 (err: MEM_FAULT) Push 0x00400040 Mar 07 13:02:36 7-of-9 kernel: delay: estimated 192, actual 0 Mar 07 13:04:22 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 4 Get 0x00200d4984 Put 0x00200d4d1c IbGet 0x00000250 IbPut 0x00000251 State 0x8000745c (err: INVALID_CMD) Push 0x00400040 Mar 07 13:04:22 7-of-9 kernel: nouveau E[ PGRAPH][0000:01:00.0] DATA_ERROR INVALID_BITFIELD Mar 07 13:04:22 7-of-9 kernel: nouveau [ PGRAPH][0000:01:00.0] DATA_ERROR Mar 07 13:04:22 7-of-9 kernel: nouveau E[ PGRAPH][0000:01:00.0] ch 4 [0x003f96e000] subc 3 class 0x8597 mthd 0x1458 data 0xffffffff Mar 07 13:04:22 7-of-9 kernel: nouveau E[ PFB][0000:01:00.0] trapped read at 0x0000000000 on channel 0x0003f96e PFIFO/PFIFO_READ/PUSHBUF reason: PT_NOT_PRESENT Mar 07 13:11:59 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] DMA_PUSHER - Ch 2 Get 0x0020008fe4 Put 0x0020008ff8 IbGet 0x00000327 IbPut 0x00000329 State 0x80000064 (err: INVALID_CMD) Push 0x00400040 Mar 07 13:11:59 7-of-9 kernel: nouveau [ PFIFO][0000:01:00.0] CACHE_ERROR - Ch 2/0 Mthd 0x0060 Data 0xffffffff at present running KDE 4.10.1 kernel 3.7.10-1 4Gb ram currently running with 2.56Gib free memory video card is a GeForce GT220 @1Gb memory. Twin monitors USB external sound card (onboard card is pants) New install middle of January Thanks Pete . -- Linux 7-of-9 3.7.10-1-ARCH #1 SMP PREEMPT Thu Feb 28 09:50:17 CET 2013 x86_64 GNU/Linux

2 2

Re: [arch-general] [arch-dev-public] FYI: systemd 198
by Leonid Isaev 09 Mar '13

09 Mar '13

On Fri, 8 Mar 2013 09:35:39 +0900 Tom Gundersen <teg(a)jklm.no> wrote: > Hi guys, > > A new systemd release is out (not yet packaged though), and there are > several features which might be of interest to us. > > Cheers, > > Tom > > ---------- Forwarded message ---------- > From: Lennart Poettering <lennart(a)poettering.net> > Date: Fri, Mar 8, 2013 at 8:12 AM > Subject: [systemd-devel] [ANNOUNCE] systemd 198 > To: systemd Mailing List <systemd-devel(a)lists.freedesktop.org> > > > Hey! > > Finally, here's 198, with many big changes: > > http://www.freedesktop.org/software/systemd/systemd-198.tar.xz > > In detail: > > * Configuration of unit files may now be extended via drop-in > files without having to edit/override the unit files > themselves. More specifically, if the administrator wants to > change one value for a service file foobar.service he can > now do so by dropping in a configuration snippet into > /etc/systemd/systemd/foobar.service.d/*.conf. The unit logic > will load all these snippets and apply them on top of the > main unit configuration file, possibly extending or > overriding its settings. Using these drop-in snippets is > generally nicer than the two earlier options for changing > unit files locally: copying the files from > /usr/lib/systemd/system/ to /etc/systemd/system/ and editing > them there; or creating a new file in /etc/systemd/system/ > that incorporates the original one via ".include". Drop-in > snippets into these .d/ directories can be placed in any > directory systemd looks for units in, and the usual > overriding semantics between /usr/lib, /etc and /run apply > for them too. > > * Most unit file settings which take lists of items can now be > reset by assigning the empty string to them. For example, > normally, settings such as Environment=FOO=BAR append a new > environment variable assignment to the environment block, > each time they are used. By assigning Environment= the empty > string the environment block can be reset to empty. This is > particularly useful with the .d/*.conf drop-in snippets > mentioned above, since this adds the ability to reset list > settings from vendor unit files via these drop-ins. > > * systemctl gained a new "list-dependencies" command for > listing the dependencies of a unit recursively. > > * Inhibitors are now honored and listed by "systemctl > suspend", "systemctl poweroff" (and similar) too, not only > GNOME. These commands will also list active sessions by > other users. > > * Resource limits (as exposed by the various control group > controllers) can now be controlled dynamically at runtime > for all units. More specifically, you can now use a command > like "systemctl set-cgroup-attr foobar.service cpu.shares > 2000" to alter the CPU shares a specific service gets. These > settings are stored persistently on disk, and thus allow the > administrator to easily adjust the resource usage of > services with a few simple commands. This dynamic resource > management logic is also available to other programs via the > bus. Almost any kernel cgroup attribute and controller is > supported. > > * systemd-vconsole-setup will now copy all font settings to > all allocated VTs, where it previously applied them only to > the foreground VT. > > * libsystemd-login gained the new sd_session_get_tty() API > call. > > * This release drops support for a few legacy or > distribution-specific LSB facility names when parsing init > scripts: $x-display-manager, $mail-transfer-agent, > $mail-transport-agent, $mail-transfer-agent, $smtp, > $null. Also, the mail-transfer-agent.target unit backing > this has been removed. Distributions which want to retain > compatibility with this should carry the burden for > supporting this themselves and patch support for these back > in, if they really need to. Also, the facilities $syslog and > $local_fs are now ignored, since systemd does not support > early-boot LSB init scripts anymore, and these facilities > are implied anyway for normal services. syslog.target has > also been removed. > > * There are new bus calls on PID1's Manager object for > cancelling jobs, and removing snapshot units. Previously, > both calls were only available on the Job and Snapshot > objects themselves. > > * systemd-journal-gatewayd gained SSL support. > > * The various "environment" files, such as /etc/locale.conf > now support continuation lines with a backslash ("\") as > last character in the line, similar in style (but different) > to how this is supported in shells. > > * For normal user processes the _SYSTEMD_USER_UNIT= field is > now implicitly appended to every log entry logged. systemctl > has been updated to filter by this field when operating on a > user systemd instance. > > * nspawn will now implicitly add the CAP_AUDIT_WRITE and > CAP_AUDIT_CONTROL capabilities to the capabilities set for > the container. This makes it easier to boot unmodified > Fedora systems in a container, which however still requires > audit=0 to be passed on the kernel command line. Auditing in > kernel and userspace is unfortunately still too broken in > context of containers, hence we recommend compiling it out > of the kernel or using audit=0. Hopefully this will be fixed > one day for good in the kernel. > > * nspawn gained the new --bind= and --bind-ro= parameters to > bind mount specific directories from the host into the > container. > > * nspawn will now mount its own devpts file system instance > into the container, in order not to leak pty devices from > the host into the container. > > * systemd will now read the firmware boot time performance > information from the EFI variables, if the used boot loader > supports this, and takes it into account for boot performance > analysis via "systemd-analyze". This is currently supported > only in conjunction with Gummiboot, but could be supported > by other boot loaders too. For details see: > > http://www.freedesktop.org/wiki/Software/systemd/BootLoaderInterface > > * A new generator has been added that automatically mounts the > EFI System Partition (ESP) to /boot, if that directory > exists, is empty, and no other file system has been > configured to be mounted there. > > * logind will now send out PrepareForSleep(false) out > unconditionally, after coming back from suspend. This may be > used by applications as asynchronous notification for > system resume events. > > * "systemctl unlock-sessions" has been added, that allows > unlocking the screens of all user sessions at once, similar > how "systemctl lock-sessions" already locked all users > sessions. This is backed by a new D-Bus call UnlockSessions(). > > * "loginctl seat-status" will now show the master device of a > seat. (i.e. the device of a seat that needs to be around for > the seat to be considered available, usually the graphics > card). > > * tmpfiles gained a new "X" line type, that allows > configuration of files and directories (with wildcards) that > shall be excluded from automatic cleanup ("aging"). > > * udev default rules set the device node permissions now only > at "add" events, and do not change them any longer with a > later "change" event. > > * The log messages for lid events and power/sleep keypresses > now carry a message ID. > > * We now have a substantially larger unit test suite, but this > continues to be work in progress. > > * udevadm hwdb gained a new --root= parameter to change the > root directory to operate relative to. > > * logind will now issue a background sync() request to the kernel > early at shutdown, so that dirty buffers are flushed to disk early > instead of at the last moment, in order to optimize shutdown > times a little. > > * A new bootctl tool has been added that is an interface for > certain boot loader operations. This is currently a preview > and is likely to be extended into a small mechanism daemon > like timedated, localed, hostnamed, and can be used by > graphical UIs to enumerate available boot options, and > request boot into firmware operations. > > * systemd-bootchart has been relicensed to LGPLv2.1+ to match > the rest of the package. It also has been updated to work > correctly in initrds. > > * Policykit previously has been runtime optional, and is now > also compile time optional via a configure switch. > > * systemd-analyze has been reimplemented in C. Also "systemctl > dot" has moved into systemd-analyze. > > * "systemctl status" with no further parameters will now print > the status of all active or failed units. > > * Operations such as "systemctl start" can now be executed > with a new mode "--irreversible" which may be used to queue > operations that cannot accidentally be reversed by a later > job queuing. This is by default used to make shutdown > requests more robust. > > * The Python API of systemd now gained a new module for > reading journal files. > > * A new tool kernel-install has been added that can install > kernel images according to the Boot Loader Specification: > > http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec > > * Boot time console output has been improved to provide > animated boot time output for hanging jobs. > > * A new tool systemd-activate has been added which can be used > to test socket activation with, directly from the command > line. This should make it much easier to test and debug > socket activation in daemons. > > * journalctl gained a new "--reverse" (or -r) option to show > journal output in reverse order (i.e. newest line first). > > * journalctl gained a new "--pager-end" (or -e) option to jump > to immediately jump to the end of the journal in the > pager. This is only supported in conjunction with "less". > > * journalctl gained a new "--user-unit=" option, that works > similar to "--unit=" but filters for user units rather than > system units. > > * A number of unit files to ease adoption of systemd in > initrds has been added. This moves some minimal logic from > the various initrd implementations into systemd proper. > > * The journal files are now owned by a new group > "systemd-journal", which exists specifically to allow access > to the journal, and nothing else. Previously, we used the > "adm" group for that, which however possibly covers more > than just journal/log file access. This new group is now > already used by systemd-journal-gatewayd to ensure this > daemon gets access to the journal files and as little else > as possible. Note that "make install" will also set FS ACLs > up for /var/log/journal to give "adm" and "wheel" read > access to it, in addition to "systemd-journal" which owns > the journal files. We recommend that packaging scripts also > add read access to "adm" + "wheel" to /var/log/journal, and > all existing/future journal files. To normal users and > administrators little changes, however packagers need to > ensure to create the "systemd-journal" system group at > package installation time. > > * The systemd-journal-gatewayd now runs as unprivileged user > systemd-journal-gateway:systemd-journal-gateway. Packaging > scripts need to create these system user/group at > installation time. > > * timedated now exposes a new boolean property CanNTP that > indicates whether a local NTP service is available or not. > > * systemd-detect-virt will now also detect xen PVs > > * The pstore file system is now mounted by default, if it is > available. > > * In addition to the SELinux and IMA policies we will now also > load SMACK policies at early boot. > > Contributions from: Adel Gadllah, Aleksander Morgado, Auke > Kok, Ayan George, Bastien Nocera, Colin Walters, Daniel Buch, > Daniel Wallace, Dave Reisner, David Herrmann, David Strauss, > Eelco Dolstra, Enrico Scholz, Frederic Crozat, Harald Hoyer, > Jan Janssen, Jonathan Callen, Kay Sievers, Lennart Poettering, > Lukas Nykryn, Mantas Mikulėnas, Marc-Antoine Perennou, Martin > Pitt, Mauro Dreissig, Max F. Albrecht, Michael Biebl, Michael > Olbrich, Michal Schmidt, Michal Sekletar, Michal Vyskocil, > Michał Bartoszkiewicz, Mirco Tischler, Nathaniel Chen, Nestor > Ovroy, Oleksii Shevchuk, Paul W. Frields, Piotr Drąg, Rob > Clark, Ryan Lortie, Simon McVittie, Simon Peeters, Steven > Hiscocks, Thomas Hindoe Paaboel Andersen, Tollef Fog Heen, Tom > Gundersen, Umut Tezduyar, William Giokas, Zbigniew > Jędrzejewski-Szmek, Zeeshan Ali (Khattak) > > Lennart > > -- > Lennart Poettering - Red Hat, Inc. > _______________________________________________ > systemd-devel mailing list > systemd-devel(a)lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/systemd-devel With this release, I have a minor issue with shutdown/reboot as a normal user from tty, if the _same_ tty saw a root login and subsequent logout earlier. I _guess_, this is also true for any other user, not only root. So: 1. Power on -> login as a user to tty -> systemctl poweroff works OK. 2. Power on -> login as root to tty; do something; logout -> login as user to same tty -> systemctl poweroff yields :User root is logged in on tty1. :Please retry operation after closing inhibitors and logging out other :users. Alternatively, ignore inhibitors and users with 'systemctl poweroff :-i'. Meanwhile, systemd-inhibit --list says there are 0 inhibitors, ps shows no root shells, and loginctl shows no leftover root sessions. I have all default configs... So what am I missing here? Thanks in advance, -- Leonid Isaev GnuPG key: 0x164B5A6D Fingerprint: C0DF 20D0 C075 C3F1 E1BE 775A A7AE F6CB 164B 5A6D

1 0

[arch-general] makechrootpkg vs. namcap
by Lieven Moors 09 Mar '13

09 Mar '13

Hi, I was building a package using makechrootpkg, and the build was failing because a mandatory dependency was missing. But when I add the dependency, namcap complains that it is not needed. I was wondering how namcap checks dependencies, and what the particular shortcommings are of namcap when detecting dependencies. I was also wondering if there could be a possibility that namcap is right, and that something else goes wrong while doing the chroot-build. I would be grateful if somebody could enlighten me a little in this... Greetings, lieven

2 3

Re: [arch-general] Virtualbox guest additions on custom kernel
by Ralf Mardorf 09 Mar '13

09 Mar '13

I suspect you're missing an optional dependency. $ pacman -Si virtualbox-guest-utils | grep non-stock Optional Deps : virtualbox-guest-dkms: Guest kernel source modules for non-stock kernels It's likely that it will work as it does work for the host, https://wiki.archlinux.org/index.php/VirtualBox#Hosts_running_a_custom_kern… , IOW I guess you need to install "virtualbox-guest-dkms", then run # dkms install vboxhost/$(pacman -Q virtualbox|awk {'print $2'}|sed 's/\-.\+//') -k $(uname -rm|sed 's/\ /\//') and after that to load the modules.

1 0

[arch-general] Virtualbox guest additions on custom kernel
by Pietro Paolini 09 Mar '13

09 Mar '13

Hello all, I compiled my own custom kernel on a virtual machine and then I need to provide at my system the additions in order to have a compelete system. I tried to follow the https://wiki.archlinux.org/index.php/VirtualBox#Install_the_Guest_Additions but I catch an error on # modprobe -a vboxguest vboxsf vboxvideo FATAL: module vboxdrv not found And under /lib/modules/mykernel/ or /lib/modules/extra-mykernel I can't find the modules, do I compile by hands the module, any suggestions ? Hope this is the right place where ask, thanks in advance, Pietro

1 0

[arch-general] UEFI madness
by David Benfell 08 Mar '13

08 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, So far, my attempt to install Arch Linux on a UEFI system is a total facepalm moment. The problem is in booting post-install. So, first, does anyone have actual--and successful--experience installing Arch on a UEFI system? Yes, I went to the Arch Wiki, which initially pointed me at GummiBoot. There are actually two sets of instructions, one given where I looked first, for the UEFI entry, and another under the entry for GummiBoot. Neither succeeds, but I wound up following the latter set of instructions (and cleaning up extra entries with efibootmgr, which fortunately makes this relatively easy). GummiBoot says it can't find /vmlinuz-linux. I tried modifying the configuration to say /boot/vmlinuz-linux, but no joy. Apparently, I'm really supposed to copy this file and the initrd image to the EFI partition, but nobody says where in the EFI partition, so I have no idea. I also tried following the instructions for grub-efi. I'm just mystified. I managed to install the right package, but from there I just wasn't understanding a thing. I've been using linux since 1999 so this shouldn't be so completely mystifying. I tried installing rEFInd (from sourceforge). As near as I can tell, it does indeed detect all the possible boot options on the system. But when I try booting the Arch installation, it says it can't find the root partition. It also detects the GummiBoot option, but that leads the same place as before. Finally, it detects the Windows option, which I hope still works (unfortunately I do need this). I guess getting something that just works--like it did with BIOS systems--is not in the cards. What do I do now? Thanks! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQIcBAEBAgAGBQJRMZ+5AAoJELJhbl/uPb4SAA4P/3xG4C5viqdgdZhtZ72hFC9v VLBWw9CguzTvqYMydO4TTqwpyObW0iPFMWRzlkMt7YjmC83qgQJDAI1P7KR4fpHE fHjyqS7IKFnLe4ckKnKJIQMGeEbwcsAaF0Loy/22dW+5U10IRy39NIlvUdWQJKtc O7vpch/lZ2DKFd7zmKgKLu2FLuZK0FvwN2cGH91cYP66rloqaXytXWLZ3IIvCtf5 mGJqwx4CjKWf3FefFANXYsPtb4rmfbE1xl/xeIT4OH0F+0H77EFhFTkBsDknYnHM pUg9B5pHmJ+xMiVSDIYYIXpgT/Spk9DWp4+PZN5N8GBE63J8kzWuUqTVV/XVyR1x 0aZCJAo0Ke+swBa6cGZ/WSWRqA4kP9nJBtJ00qX+PE3FFFd8vjYyP7Qz0cmIhfqV VHx3UXzI9Q8EkMzlENWD79M+WHLeUPQopsdfmWOOI1E7N+5seeFRmekmB+jY1NRJ uXNPCq5w0iIaWB4KuAmchbP3qtoGxU5oXJ5IPh3NQOIdbScN0+4l6HtOmnxMQ2H1 HyR/2nV0e5rvuhsuKBn2ZGyLOvYN6I9AjFBPI5VmY2Ansy750AOOBqXIPLlBouqb Oy0h26dfyn8RdlcoYm4QlXzra1p6ZBk5dJ9GxYhVsXxAaUnlrprXtk3HPQcIjpiS I4n74T8MiK5TxjSDJO60 =6UgK -----END PGP SIGNATURE-----

9 19

Re: [arch-general] [wpa_actiond 1.4] slow disconnects
by Thomas Bächler 08 Mar '13

08 Mar '13

Am 05.03.2013 16:44, schrieb Pali Rohár: > Hello, > > On Tuesday 05 March 2013 10:23:24 Thomas Bächler wrote: >> Am 04.03.2013 21:26, schrieb Leonid Isaev: >>> Hi, >>> >>> With testing/wpa_actiond-1.4 I am having a minor problem >>> when shutting down net-auto-wireless.service: 'systemctl >>> stop net-auto-wireless.service' pauses for ~10sec before >>> finally disconnecting. Of course, this also occurs on >>> normal system poweroff (which is usually ~5sec). The wifi >>> network is WPA "enterprise" (important entries in >>> wpa_supplicant.conf: key_mgmt=WPA-EAP; eap=PEAP; >>> phase1="peaplabel=0"; phase2="auth=MSCHAPV2"), and piece of >> >>> daemon.log after the above delay has elapsed: >> I've seen this too, but I didn't determine yet that is was >> wpa_actiond's fault. There are several issues here: >> >> 1) I am unsure what exactly terminates wpa_actiond. > > Before my patches wpa_actiond could be terminated only by > KILL/TERM signals or correct "terminate" event from > wpa_supplicant. wpa_supplicant sending terminate event only if > wpa_supplcant is stopped regulary (when wpa_supplicant is killed > by KILL no terminate event is sent!). With my patches wpa_actiond > is also terminated when wpa_supplicant is KILLed. > >> 2) net-auto-wireless.service is Type=forking, but has no >> proper MainPID detected, so systemd doesn't know what exactly >> to kill. >> >> This change however seems to be related to Pali's changed, so >> I'm CC'ing him to see if he knows what this might be about. > > You can always stop wpa_actiond with KILL or TERM signals. I did > not removed any code which handling stopping wpa_actiond. I only > added another check if wpa_actiond should exit. > > So my patches should not change behaviour of stopping > wpa_actiond. Problem is maybe in blackbox which starting and > stoppping wpa_actiond. I'm not using that systemd and this is > another reason against it. Not easy to understand and debug this > problem. > > I tested my patches on my system without systemd and wpa_actiond > working without problem. Really I cannot help you with blackbox > which I not using... This may even be related to the way netcfg stops wpa_actiond (it doesn't - it only stops wpa_supplicant). One can probably debug this easily by making wpa_actiond more verbose.

2 1

[arch-general] virtualbox-host-dkms
by Ralf Mardorf 08 Mar '13

08 Mar '13

Hi :) dkms can't rebuild deleted vbox modules for the "linux" kernel # dkms install vboxhost/$(pacman -Q virtualbox|awk {'print $2'}|sed 's/\-.\+//') -k $(uname -rm|sed 's/\ /\//') Module vboxhost/4.2.8 already installed on kernel 3.7.10-1-ARCH/x86_64 # ls /usr/lib/modules/extramodules-3.7-ARCH/ version and for linux-rt I get the same error # dkms install vboxhost/$(pacman -Q virtualbox|awk {'print $2'}|sed 's/\-.\+//') -k 3.6.11-rt30-1-rt/x86_64 Module vboxhost/4.2.8 already installed on kernel 3.6.11-rt30-1-rt/x86_64 but there never were modules installed for the kernel-rt. Regards, Ralf

3 4

[arch-general] Weird issue with Google Talk/Hangout plugin
by David Rosenstrauch 08 Mar '13

08 Mar '13

I'm having a weird issue with the Google Talk plugin (https://aur.archlinux.org/packages/google-talkplugin/) distorting all my video images - both the ones of me coming in from my camera, and the ones coming in from others across the Net. See http://www.darose.net/GoogleHangWeirdness.png for an example. Anyone have any idea what's going on here and/or how to fix? This seems to be a recent issue - i.e., probably caused by some package upgrade within the past week or so. I'm running google-talkplugin 3.14.17.0-1 with firefox 19.0-1. But I don't think the issue is caused by the plugin itself. (Or by firefox, since I see the same problem when I use Google chromium browser.) I was running an older version of the plugin - which had been working fine for weeks - when I started experiencing the issue. I upgraded to the latest version in an attempt to work around the problem, but it didn't clear it up. So as I said, I don't think the plugin itself is the cause of the problem - since 2 different versions of the plugin are experiencing the issue, and the issue popped up out of the blue after things had been working fine for quite a while. Any assistance anyone might be able to lend here would be much appreciated! Thanks, DR

1 1

Re: [arch-general] Cannot chroot '/bin/bash': No such file or directory
by David C. Rankin 07 Mar '13

07 Mar '13

On 03/06/2013 08:24 PM, Ross Hamblin wrote: > It's been a while now but ISTR this message when chroot from 32 bit host > and 64 bit target, or maybe it was vice versa. > > HTH > Ross. It does. It has to be something that simple. However, checking, I have booted with the i686 install medium. The box is an older dell P4, so the i686 is correct and matches the system installed. The install disk /bin/bash date is May 7, 2011. The /bin/bash on /dev/sda6 at /mnt/usr/bin/bash (after mount of the system / at /mnt) is January 26, 2013. Attempting the chroot again on fresh reboot gives the same failure: # cd /mnt # chroot /mnt chroot: failed to run command `/bin/bash`: No such file or directory For some reason it is like the system has no ability to find anything. The install cd is a pre /lib change cd, so that may be the issue. I have downloaded the latest install cd and will try again. Thank you again Ross. Any other suggestions welcomed. -- David C. Rankin, J.D.,P.E.

2 1

[arch-general] Cannot chroot '/bin/bash': No such file or directory
by David C. Rankin 07 Mar '13

07 Mar '13

Guys, Attempting to fix the test box that updating left unable to boot, I cannot chroot to fix the system. I've booted from the install medium and done the normal mount of the existing system under /mnt: mount /dev/sda6 /mnt mount /dev/sda5 /mnt/home mount /dev/sda8 /mnt/boot mount -o bind /dev /mnt/dev mount -t proc none /mnt/proc mount -t sysfs none /mnt/sys All files appear in their proper place under /mnt. However, attempting to create the chroot fails: cd /mnt chroot /mnt /bin/bash chroot: failed to run command '/bin/bash': No such file or directory /bin/bash is in the new location /usr/bin/bash (moved from /bin/bash by the update) with with a proper symlink in /mnt/bin/bash pointing to ../usr/bin/bash This if the first time I've ever had difficulty chrooting a system. I suspect that this is caused by the last update that pulled in systemd which left the system unbootable. Anyone know what could be causing the chroot failure? I've tried explicitly pointing the chroot to ./usr/bin/bash, etc... and tried it without any executable specified. Regardless, I get the same "No such file or directory". Thanks in advance for any help or link you can provide. -- David C. Rankin, J.D.,P.E.

3 2

[arch-general] Forced to run fsck manually on unattended system
by edd_smith 07 Mar '13

07 Mar '13

Hi, I run a series of remote boxes running Arch. These boxes are unnattended and are very difficult to access. Due to the nature of their power supply they are often powered down without any warning. A UPS is not an option. I have noticed that over time the boxes are showing file system errors and getting stuck during the boot phase requiring manual intervention (Either press Control-D to continue - resulting in failure or log in to the start up shell using the root password and run fsck manually). I simply answer yes to every prompt from fsck and the errors are resolved, the box reboots and runs fine. I need to be able to force an 'fsck -y' type command at every boot as visiting these boxes manually isn't an option. I have already moved the partitions to ext2 as this seemed to show a mild improvement and also set 0 1 flags in /etc/fstab but still I'm seeing the freezing on boot. First of all should I be re-partitioning my drives to something which can handle these kinds of sudden power outages or removing the swap space or something? Secondly can I have arch run a completely unprompted startup whereby fsck will do its best to repair the system without requiring intervention - for me a blank disk is no worse than a frozen system. Thanks in advance, Edward Smith -- View this message in context: http://archlinux.2023198.n4.nabble.com/Forced-to-run-fsck-manually-on-unatt… Sent from the arch general mailing list archive at Nabble.com.

4 4

[arch-general] [wpa_actiond 1.4] slow disconnects
by Leonid Isaev 06 Mar '13

06 Mar '13

Hi, With testing/wpa_actiond-1.4 I am having a minor problem when shutting down net-auto-wireless.service: 'systemctl stop net-auto-wireless.service' pauses for ~10sec before finally disconnecting. Of course, this also occurs on normal system poweroff (which is usually ~5sec). The wifi network is WPA "enterprise" (important entries in wpa_supplicant.conf: key_mgmt=WPA-EAP; eap=PEAP; phase1="peaplabel=0"; phase2="auth=MSCHAPV2"), and piece of daemon.log after the above delay has elapsed: Mar 3 17:08:39 bluemoon systemd[1]: Stopping Automatic netcfg wireless connection service... Mar 3 17:08:39 bluemoon wpa_actiond[380]: Interface 'wlan0' lost connection to network 'lsusecure' Mar 3 17:08:39 bluemoon netcfg-wpa_actiond[9323]: :: university-wifi down [done] Mar 3 17:08:39 bluemoon wpa_actiond[380]: Interface 'wlan0' disconnected from network 'lsusecure' Mar 3 17:08:39 bluemoon wpa_actiond[380]: Terminating wpa_actiond session for interface 'wlan0' This is not related to wpa_supplicant 2.0. In wpa_actiond git tree, there was only 1 essential commit (baed7cae042ceb50507066f2df85b06414ab2176) which led to v1.4, but I'm not sure what exactly causes this. Since wpa_actiond doesn't have a --debug switch, how do I trace the issue? Thanks, -- Leonid Isaev GnuPG key: 0x164B5A6D Fingerprint: C0DF 20D0 C075 C3F1 E1BE 775A A7AE F6CB 164B 5A6D

2 2

[arch-general] Gotta be a stupid gnome-terminal problem
by David Benfell 05 Mar '13

05 Mar '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, All other terminal emulators work. I have checked--thanks to what little I found on the web that seemed apropos--to be sure that /dev/pts is mounted (it is). But when I run gnome-terminal, I get no prompt and typing in commands does not work. This is a brand new installation, so I can't say it worked before some change. All I know is it doesn't work. What did I miss? Thanks! -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJRMg7tAAoJELJhbl/uPb4SugEP/iQwglQu2HREKC32w31rHZXD dJCsZ5b0Up7cwqj8y4lCfg3cQVwlOVy7gmjjc6LYJylY6lNCuXbMJpi4uFqw1juq ebmjmMs33bVBnnvOyzt4H8T67N9f8vS2iHhsm/5doEhoN/HLhn4Q/9bGnqB1Zmg/ PleJOFAiIjtx3ZMsBmeYzRvssmlAcnBFZKrMAtBz7ajEX8c2v/u3//y/cd9gQdwG WiNpi45U+aId+P+adeqhRf0mHSzU5S1WmAPa8p06g+uVhGfEFva+E8ZNUwYG8z7f L83fbYu97liICNSoaWwb7h/kDDAIqWNr/kXxz8XFccCTlsGkrC9WUoqHrQzjKqsr 8Ok/cvIx7KiMOdnmBA9bRcdeEhxVnodfbIjd1NRXSSb/0JPXspV0QTF7NqYJXbY+ qpMBKFZPAwMFCzFa6brrUHwm5nhNn7SHcdbDveF2Tl1RQTuUdgf9cdSk/Xg7U89a b74xrrNYwr9GYoXiqxkB3KuwjfdI0ksO840iaYGf5ly+TUpABgFY7dBamSqjjZQK Szruq1fEFmun5hDFwwpmGKlhAmU4vln0Tm71xRNr95yPHEV+K8F3ZfoFVQcHd8cx CzPEGqX+g/bSC1iEVspYlCCL+/MfbiNp9JMtYsWW3l9AaATq9aCXaD+2veTCN+S9 vh636DllstMYh4dsSi9U =JOIU -----END PGP SIGNATURE-----

3 5

[arch-general] Sound problems
by Frank Zimmermann 04 Mar '13

04 Mar '13

Good evening, I'm having troubles getting sound to work aftereach reboot. I've followed the instructions from the wiki. But after each reboot I need to run alsamixer -> selct the soundcard by pressing F6 -> and then have to increase the volume of the speaker. When invoking systemctl enable alsa-restore.service and systemctl enable alsa-store.service I do get the following error messsage: The unit files have no [Install] section. They are not meant to be enabled using systemctl. Possible reasons for having this kind of units are: 1) A unit may be statically enabled by being symlinked from another unit's .wants/ or .requires/ directory. 2) A unit's purpose may be to act as a helper for some other unit which has a requirement dependency on it. 3) A unit may be started when needed via activation (socket, path, timer, D-Bus, udev, scripted systemctl call, ...). ... and it starts from the beginning after the next reboot. BTW it doesn't help when I change the settings in /etc/asound.conf from pulseaudio to the hw device. Thanks for any help Frank

4 10

[arch-general] How to configure Qt 5 theme?
by GSC 04 Mar '13

04 Mar '13

I want to configure qt5 apps (like qt creator) theme to use the same as qt4 apps (oxygen) in KDE. How can I do this? And is there an appmenu-qt5 port?

3 2

[arch-general] RFC: Mesa and shared LLVM libraries
by Armin K. 03 Mar '13

03 Mar '13

Hello everyone, First, I am aware that ArchLinux is against patching packages to implement some features, but this might be worth the effort. Tom Stellard of AMD has announced a R600 backend patch against LLVM 3.2 few days ago [1]. It's basically his repository (llvm-amdgpu-snapshot) diffed against upstream LLVM (llvm). By applying the patch to ArchLinux LLVM package, one could benefit from enabling Mesa to link against LLVM shared library. Doing so, space would be saved and so the memory at runtime, too (I guess since it will use shared mappings). I've done some work regarding that. I've managed to split libLLVM-3.2.so from llvm package and put it into libllvm package. The package is a bit big though - the shared library contains all (~100) static libraries linked into one single library. The result is like this: Targets (1): libllvm-3.2-5 Total Installed Size: 21.77 MiB Building MesaLib against shared libLLVM-3.2.so saves space drastically. For all MesaLib produced packages, the output is like this one: Targets (6): ati-dri-9.1-2 intel-dri-9.1-2 mesa-9.1-2 mesa-libgl-9.1-2 nouveau-dri-9.1-2 svga-dri-9.1-2 Total Installed Size: 82.13 MiB Net Upgrade Size: -282.07 MiB 260 MB saved ... Looks nice to me. R600 backend will be part of LLVM 3.3 anyways, and this can be used in the future without patching anything. I am attaching patches for llvm and mesa PKGBUILDs to incorporate these changes. Do as you may please. If someone is interested in forwarding this to -dev-public list it would be nice. Have a nice evening. (As a side note, somehow llvm tarball sha256sum was wrong when I downloaded it). [1] http://lists.freedesktop.org/archives/mesa-dev/2013-March/035561.html

2 2

[arch-general] Qt4 documentation?
by Huang KangJing 03 Mar '13

03 Mar '13

Hi, I'm here to ask whether the qt4 documentation package will still be provided officially after such an upgrade from qt4 to qt5. I noticed that after qt5 was supported officially, certain qt packages were replaced by qt5 packages and qt4 packages were introduced, but as qt-doc was replaced by qt5-doc and qt4-doc didn't come up, I wonder whether this one will be supported officially.. Thanks. -- Huang KangJing 2012 Undergraduate, School of Physics,Peking University

2 1

[arch-general] Order of udev and autodetect HOOKS
by Sergi Pons Freixes 02 Mar '13

02 Mar '13

Hi All, Is there any impact on the system depending on the order of udev and autedetect? I mean, is the same HOOKS="base autodetect udev ..." than HOOKS="base udev autodetect ..." ? Cheers, Sergi

1 0

Re: [arch-general] [arch-dev-public] ISO image announcements
by Cody Maloney 01 Mar '13

01 Mar '13

On Fri, Mar 1, 2013 at 2:20 AM, Pierre Schmitz <pierre(a)archlinux.de> wrote: > Hi all, > > I just uploaded a new installer image. I did not write any announcement > for the last two. Some people were asking for a news item. What is your > opinion on this? Should we post announcements even if there are no > exciting changes? I could also generate a list of updated packages that > are available on the new iso compared to the old one. > > Greetings, > > Pierre > I'd like to have just a feed of when ISO releases come out (Esp. since sometimes, even if there aren't major changes to the iso, some things like the interface naming change occur because of just package upgrade). Looking at the release page generated HTML there is an RSS feed (https://www.archlinux.org/feeds/releases/) but this doesn't seem to be visibly linked from the page. Be nice if the link was added to the current releases section of the page. Thanks, Cody Maloney

1 0

[arch-general] mkinitcpio-encrypt-multi
by Karsten Rode 01 Mar '13

01 Mar '13

Hi I'm using btrfs on two LUKS encrypted partitions as root. This is working perfectly with the mkinitcpio hook "encrypt-multi" from the aur package "mkinitcpio-encrypt-multi". Does anybody know if there is a plan to include this functionality in the "encrypt" hook from core/cryptsetup ? regards, Karsten

1 0

[arch-general] Can't build virtualbox
by Manuel Reimer 01 Mar '13

01 Mar '13

Hello, I have a reproducible problem with virtualbox on my system. To find out which version was the first one that causes those problems for me, I want to build virtualbox on my own and step back until the problem no longer exists. I've checked out the community PKGBUILD's using git. If I try to build virtualbox, it always ends with the following messages: kmk_builtin_rm -f /home/build/git/community/virtualbox/repos/community-x86_64/src/VirtualBox-4.2.6/out/linux.amd64/release/obj/webservice/gsoap_copy_all_ts kmk_builtin_mkdir -p /home/build/git/community/virtualbox/repos/community-x86_64/src/VirtualBox-4.2.6/out/linux.amd64/release/obj/webservice/demo_soapxml /home/build/git/community/virtualbox/repos/community-x86_64/src/VirtualBox-4.2.6/out/linux.amd64/release/obj/webservice/demo_headers /home/build/git/community/virtualbox/repos/community-x86_64/src/VirtualBox-4.2.6/out/linux.amd64/release/obj/webservice/demo_namespacemaps kmk_builtin_mv -f /home/build/git/community/virtualbox/repos/community-x86_64/src/VirtualBox-4.2.6/out/linux.amd64/release/obj/webservice/demo_headers usage: kmk_builtin_mv [-f | -i | -n] [-v] source target or: kmk_builtin_mv [-f | -i | -n] [-v] source ... directory or: kmk_builtin_mv --help or: kmk_builtin_mv --version kmk: *** [/home/build/git/community/virtualbox/repos/community-x86_64/src/VirtualBox-4.2.6/out/linux.amd64/release/obj/webservice/gsoap_copy_all_ts] Error 64 kmk: *** Waiting for unfinished jobs.... info: soapC-1.cpp info: soapC-2.cpp info: soapC-3.cpp info: soapC-4.cpp info: soapC-5.cpp info: soapC-6.cpp info: soapC-7.cpp info: soapC-8.cpp info: soapC-9.cpp info: soapC-10.cpp info: soapC-11.cpp info: soapC-12.cpp info: soapC-13.cpp info: soapC-14.cpp info: soapC-15.cpp info: soapC-16.cpp info: soapC-17.cpp info: soapC-18.cpp info: soapC-19.cpp info: soapC-20.cpp split-soapC: Created 20 files. kmk: *** Exiting with status 2 ==> ERROR: A failure occurred in build(). Aborting... I'm building with "-j2". Can someone please tell me what I have to do to make the build succeed? Thanks in advance Yours Manuel

3 2

[arch-general] tomoyo-init on linux 3.8.0-2
by Alexander Diana 01 Mar '13

01 Mar '13

Regardless of what I add in kernel flags, tomoyo-init is never loaded. I see no noticable error messages anywhere in the logs. I have confirmed tomoyo-init works when manually loaded, and confirmed that tomoyo itself is working and loaded. Anyone with ideas will be greatly appreciated, Thanks in advance, Alexander Diana <alexander.a.diana(a)gmail.com>

2 1

[arch-general] [signoff] linux-3.7.10-1
by Tobias Powalowski 01 Mar '13

01 Mar '13

Hi guys, please signoff 3.7.10 series for both arches. package is not in testing, please grab it from here: http://dev.archlinux.org/~tpowa/linux/ This will move to [core] directly, because 3.8.1 is in [testing]. greetings tpowa -- Tobias Powalowski Archlinux Developer & Package Maintainer (tpowa) http://www.archlinux.org tpowa(a)archlinux.org

2 1

[arch-general] Cannot get GNOME Keyring to work well with lightdm-razor-greeter and razor-qt
by Hexchain Tong 28 Feb '13

28 Feb '13

Hi everyone, I recently switched to razor-qt desktop and lightdm (for a faster startup), but I can't get gnome-keyring-daemon to run. I've tried https://wiki.archlinux.org/index.php/GNOME_Keyring#Use_Without_GNOME , but ~/.xinitrc doesn't seem to be executed at all. Plus, I don't want to add anything into ~/.bashrc, because I think $SSH_AUTH_SOCK and some relevant variables should just be set in the session. Is there any better idea? Thanks, Hexchain

3 3

[arch-general] Svntogit looks broken
by Armin K. 27 Feb '13

27 Feb '13

Hi, are there any problems with Archlinux' svntogit? Latest changes are shown from ~22 hours ago.

1 0

[arch-general] watchdog 5.13 changes
by Thomas Bächler 27 Feb '13

27 Feb '13

The new watchdog 5.13 package removes the rc.d scripts and conf.d files. There is a systemd service file for watchdog included. There is no service file for wd_keepalive, because the functionality of wd_keepalive is provided by systemd - just uncomment RuntimeWatchdogSec=20 in /etc/systemd/system.conf.

1 0

[arch-general] rEFInd 0.6.4 + linux 3.7.2-1 fail to boot
by André Vitor de Lima Matos 27 Feb '13

27 Feb '13

Hi, everyone. I've a HP Pavilion g4 machine with UEFI, using rEFInd. After a upgraded to refind-efi 0.6.4-1 and linux 3.7.2-1, my system stopped to boot. rEFInd loads properly, and others boot options, like EFI Shell and Windows 8 are working, but trying to boot kernel 3.7.2 froze on the message in begin saying "Starting vmlinuz-linux ...kernel options". initrd was built correctly. This issue only occurs with linux 3.7.2, downgrading to 3.7.1 makes system bootable again (from where I'm writing). rEFInd config file is basically default, only with timeout changed to 5. My boot options: root=/dev/AndreSYS/Arch resume=/dev/AndreSYS/Swap cryptdevice=/dev/disk/by-uuid/e38e188e-f775-41fe-9607-ce977c7716d8:syslvm ro add_efi_memmap rootfstype=ext4 -- https://profiles.google.com/andre.vmatos

7 15

Re: [arch-general] rEFInd 0.6.4 + linux 3.7.2-1 fail to boot
by John Briggs 27 Feb '13

27 Feb '13

On Tue, Feb 26, 2013 at 09:15:08AM +0100, Max Löwen wrote: > On 02/26/2013 12:17 AM, Kazuo Teramoto wrote: > >On 25 Feb 2013 at 18:13:14 -0300, André Vitor de Lima Matos wrote: > >>I can't boot with 3.8-2 again!! linux 3.8-1 is working fine > >For me it stopped to boot after > 3.7.7. Linux-3.7.7 is the last version > >that boot, each version after it don't. Gummiboot stopped to boot in > >v22, only v17 boots for me. > > > >When I choose the arch entry in the boot loader and it become freeze at > >the boot loader screen. > > > >The interaction of bootable and kernel/gummiboot versions is a mess on > >my system. The versions I cannot boot from form a dense set! I always > >bring an arch livecd with me (my UEFI mobo wont boot from USB). > > > >Currently I'm busy so I don't have time to debug it. As I don't see > >anyone talking about boot problems I'm blaming my Samsung laptop. I hope > >to have some time to debug and put the blame in someone else... > > > >Regards, > >Kazuo Teramoto > If you want to avoid to use the livecd, you could install a second > kernel, like from repo-ck and have it as an altrenative bootoption > (I also have problems with some kernels here, there is allready a > thread on that topic). The only problems I have experienced with rEFInd occurred when the new system files weren't being copied correctly to EFI/arch directory. Once I overcame that problem it has worked fine. John

1 0

[arch-general] Suggestions wanted: nvidia + nouveau in AUR PKGBUILD
by Oon-Ee Ng 27 Feb '13

27 Feb '13

I'm an nvidia user who finally decided to try out nouveau and currently have it working, but want to keep nvidia installed just-in-case. I also maintain nvidia-beta/lib32-nvidia-utils-beta/nvidia-utils-beta in the AUR. As far as I can see, keeping both nouveau and nvidia installed and usable is not difficult, especially with the new mesa split PKGBUILD. Basically I only need the following symlinks (may be a bit different from current:- 1. /usr/lib/libGL.so -> libGL.so.1 2. /usr/lib/libGL.so.1 -> libGL.so.1.2.0 OR libGL.so.313.18 3. /usr/lib/libGL.so.1.2.0 -> mesa-libGL.so.1.2.0 4. /usr/lib32/libGL.so -> libGL.so.1 5. /usr/lib32/libGL.so.1 -> libGL.so.1.2.0 OR libGL.so.313.18 6. /usr/lib32/libGL.so.1.2.0 -> mesa-libGL.so.1.2.0 7. /usr/lib/xorg/modules/extensions/libglx.so -> libglx.xorg OR libglx.so.313.18 I also need to blacklist nouveau (or remove the blacklist) for modprobe, currently done in /usr/lib/modprobe.d/nvidia.conf A few questions:- 1. The 'best' way I can figure is that all symlinks would be owned by a fake {lib32-}mesa-libgl-nvidia package. Only symlink 2, 5, and 7 above need changing when 'switching'. This would require manually running a script to change (followed by a reboot). The script can also fix the blacklist. 1a. Can the blacklist be fixed by renaming the file to not end with .conf or must it be moved out of /usr/lib/modprobe.d? 2. Alternatively, is there a way to get my bootloader to blacklist modules (modprobe.blacklist=nouveau or nouveau.blacklist=true as shown in [1]?) AND run a script which would 'fix' the symlinks before KMS? This would be preferable (and lower-maintenance for me) if possible. [1] - http://www.funtoo.org/wiki/Create_a_boot_option_for_easy_nvidia_or_nouveau_…

2 1

[arch-general] XDG variables no longer set
by Robbie Smith 26 Feb '13

26 Feb '13

For some reason, after my last reboot (a kernel update), none of the XDG variables[1] (such as $XDG_CONFIG_HOME) are being set, which broke a lot of my configuration, as I rely on those in scripts. I was able to fix it by writing a script[2] to drop in /etc/profile.d/ that would create those directories and export the variables as required, but what I want to know is why they broke in the first place. Has anyone else experienced this? Robbie [1] http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html#vari… [2] Like this (taken from /etc/xdg/xfce4/xinitrc) : #!/bin/sh # $XDG_CONFIG_HOME defines the base directory relative to which # user specific configuration files should be stored. If # $XDG_CONFIG_HOME is either not set or empty, a default equal to # $HOME/.config should be used. if test "x$XDG_CONFIG_HOME" = "x" ; then XDG_CONFIG_HOME=$HOME/.config export XDG_CONFIG_HOME fi [ -d "$XDG_CONFIG_HOME" ] || mkdir "$XDG_CONFIG_HOME"

4 5

[arch-general] Set terminus as a system font
by jugree＠lavabit.com 26 Feb '13

26 Feb '13

Hello. I installed Terminus from a source tarball and successfully set it as a console font (in /etc/vconsole.conf). How can I set it as a default system-wide monospace font? I've found this tutorial: http://orford.org/gtk/#fonts, but it doesn't explain how to use several fonts (is it possible?). The needed files (eg: ter-x16b.pcf.gz) are located in /usr/local/share/fonts. If the above is not possible, I'd like to enable it in Xterm and Emacs. I tried to set it in Xterm, but it didn't work out: $ xset +fp /usr/local/share/fonts/terminus (I also added this one to .xinitrc.) $ cd /usr/local/share/fonts/ $ mkfontscale $ mkfontdir .Xdefaults: XTerm*faceName: Terminus XTerm:faceSize: 16 or XTerm*faceName: ter-x16n or $ xterm -fn '-*-terminus-medium-*-*-*-16-*-*-*-*-*-*-*' also xorg.conf: Section "Files" FontPath "/usr/local/share/fonts/terminus" EndSection

3 2

Re: [arch-general] [arch-dev-public] linux-3.8.0-1 / wifi problem
by Genes Lists 26 Feb '13

26 Feb '13

On 02/25/2013 01:14 PM, Lukas Jirkovsky wrote: > On 25 February 2013 17:27, Pierre Schmitz <pierre(a)archlinux.de> wrote: >> >> Just a quick note as I cannot debug this atm. Updating from 3.7 to 3.8 >> breaks wireless connections on my netbook. The relevant message in the >> journal seems to be "kernel: wlan: capabilities/regulatory prevented >> using AP HT/VHT configuration, downgraded". > > I actually see this from time to time with Intel card too when using > 3.8. But I usually get connected after a few attempts. > I have troubles with some routers (enterprise cisco in my case, tho others like linksys work fine so far). In my case, I find the interface gets disconnected. Retrying may succeed - or may fail - if it fails - i reload the driver and it starts working again - i am using iwlwifi (intel N 6300 (rev 35)). Disabling and re-enabling wireless via KDE plasmoid is the simplest fix. I too see many messages like above: Feb 26 10:13:46 lap3 NetworkManager[504]: <info> (wlan0): supplicant interface state: disconnected -> scanning Feb 26 10:13:46 lap3 kernel: [42931.771953] wlan0: deauthenticating from 04:fe:7f:49:71:dd by local choice (reason=2) Feb 26 10:13:46 lap3 kernel: [42931.777211] wlan0: authenticate with 1c:aa:07:f4:cd:f3 Feb 26 10:13:46 lap3 kernel: [42931.781025] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded Feb 26 10:13:46 lap3 kernel: [42931.826366] wlan0: direct probe to 1c:aa:07:f4:cd:f3 (try 1/3) Gene/

1 0