- Arch-general - lists.archlinux.org

[arch-general] bluetooth interface
by vsec 31 Oct '17

31 Oct '17

Hi. I have two bluetooth interfaces. Both use btusb driver. How to disable one of them or rename (for example, from hci1 to hci0)? Bus 001 Device 004: Broadcom Corp. Bus 002 Device 004: Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

1 0

[arch-general] Thunderbird doesn't show e-mails
by Giovanni Santini 30 Oct '17

30 Oct '17

Hello everyone, I have a weird issue. My uni e-mail uses Office 365 as e-mail provider; I've added it in Thunderbird, but I can see only unread e-mails. All the read one are not appearing in my inbox. However, if I `cat` the INBOX file, I can see the e-mails and if I mark them as unread from somewhere else I can see them. Also, adding the e-mail address on Thunderbird on Windows doesn't have the same problem. Any idea to further investgation? -- Giovanni Santini My blog: http://giovannisantini.tk My code: https://git{hub,lab}.com/ItachiSan My GPG: 2FADEBF5

4 4

[arch-general] Weird artifacts after every pacman transaction
by Chorom Potro 28 Oct '17

28 Oct '17

Hello, Couple of days ago my power was cut in the middle of an update (pacman was updating purpose and atk), after the failed update my system would not run any app because libpurpose and libatk was corrupted. So I did a force reinstallation of both. Now everything is working but after each transaction I am seeing a bunch of texts like these: ldconfig: File /usr/lib/libavdevice.so.57 is empty, not checked. ldconfig: File /usr/lib/libavformat.so.57 is empty, not checked. ldconfig: File /usr/lib/libswscale.so.4 is empty, not checked. ldconfig: File /usr/lib/libavcodec.so.57.107.100 is empty, not checked. ldconfig: File /usr/lib/libswresample.so.2 is empty, not checked. ldconfig: File /usr/lib/libswresample.so is empty, not checked. ldconfig: File /usr/lib/libswscale.so.4.8.100 is empty, not checked. ldconfig: File /usr/lib/libpostproc.so is empty, not checked. ldconfig: File /usr/lib/libavutil.so.55.78.100 is empty, not checked. ldconfig: File /usr/lib/libpostproc.so.54 is empty, not checked. ldconfig: File /usr/lib/libavformat.so.57.83.100 is empty, not checked. ldconfig: File /usr/lib/libavutil.so is empty, not checked. ldconfig: File /usr/lib/libavcodec.so.57 is empty, not checked. ldconfig: File /usr/lib/libavresample.so.3 is empty, not checked. ldconfig: File /usr/lib/libavfilter.so.6.107.100 is empty, not checked. ldconfig: File /usr/lib/libavcodec.so is empty, not checked. ldconfig: File /usr/lib/libavutil.so.55 is empty, not checked. ldconfig: File /usr/lib/libswscale.so is empty, not checked. ldconfig: File /usr/lib/libswresample.so.2.9.100 is empty, not checked. ldconfig: File /usr/lib/libavformat.so is empty, not checked. ldconfig: File /usr/lib/libavfilter.so.6 is empty, not checked. ldconfig: File /usr/lib/libavresample.so.3.7.0 is empty, not checked. ldconfig: File /usr/lib/libavdevice.so.57.10.100 is empty, not checked. ldconfig: File /usr/lib/libpostproc.so.54.7.100 is empty, not checked. ldconfig: File /usr/lib/libavdevice.so is empty, not checked. ldconfig: File /usr/lib/libavfilter.so is empty, not checked. ldconfig: File /usr/lib/libavresample.so is empty, not checked. Is there a way to get these removed? Cheers Nirjhor (https://link.getmailspring.com/link/local-89a477ef-0ef5@nirjhor-arch/0?redi…) Sent from Mailspring (https://link.getmailspring.com/link/local-89a477ef-0ef5@nirjhor-arch/1?redi…), the best free email app for work

2 2

Re: [arch-general] gscan2pdf - could it be included in the official arch repositories?
by Stephan Fuchs 27 Oct '17

27 Oct '17

Am Dienstag, den 26.09.2017, 12:00 +0000 schrieb arch-general-request@a rchlinux.org: > On 25-09-17 17:15, Stephan Fuchs via arch-general wrote: > > Hello! > > > > I would like to ask if the program gscan2pdf could be included in > > the > > official arch repositories. > > There are currently no > > alternatives. > > > > best regards > > Stephan Fuchs > > > > Hi, > > [community] repo has 3 programs that could be an alternative : > > simple-scan (gtk3) > scanlite (requires some kde libraries) > gambas3-gb-scanner (a frontend for scanimage command, written in the > programming language gambas3 ) > > What functionality does gscan2pdf bring that none of 3 alternatives > have ? > > LVV Hi. With all programs above I can scan - right. I can also make an PDF of the scan. With gscan2pdf I can scan many pages at once (fledbed scanner or ADF) and convert all pages directly to PDF. In addition, OCR is performed. And a pdf is generated with the text from OCR as hocr layer. The special feature is that a searchable PDF can be created at once. As far as I know it is not possible with simple-scan nor with scanlite nor with gambas3-gb-scanner. The special thing is that I can correct then OCR Text directly before I save the file. And a few other things that simplify the work. It is not just another scan program. It is the only program I know what allows archiving in this way. best regards Stephan

3 2

[arch-general] RAID10 + dmcrypt/LUKS + ext4: expanding?
by L. Rose 25 Oct '17

25 Oct '17

Hi everyone, I want to setup a couple of drives using RAID10 with mdadm. On top of /dev/md0, I want to setup one large dmcrypt/LUKS encrypted ext4 volume. As Arch wiki reads, this seems to be possible. But what about expanding that volume later on? RAID#Format_the_RAID_Filesystem recommends calculating the stripe_width value for ext4 based on the number of data disks[0]. When adding a new disk, the number of data disks would increase by one, and expanding both the dmcrypt/LUKS and the ext4 layer should be possible - but what about the stripe width_value? Does it need to be updated? Should it be updated? Is it possible to update the stripe_width value afterwards? Encryption is a must for me, and having the space accessible in one big chunk instead of individual disks would allow more efficient usage and is therefore important for me. So it would be really nice to get some information on this. Thanks in advance! Regards, L. Rose [0]: https://wiki.archlinux.org/index.php/RAID#Example_3._RAID10.2Cfar2

3 2

[arch-general] Problem updating Fenrir from AUR.
by matthew dyer 24 Oct '17

24 Oct '17

Hi all. Yesterday, I notesed that Fenrir got a miner update in the AUER and when trying to update, I receive a message force settings could not be reconnized or something to the efeect. Any ideas on this one? I only made a change so that keyboard keys speak. I use yaourt to keep all my AUR packages updated. If anyone has any way to get around this please let me know. I am using gnome 3.26.1 with all updates as well as orca master as of this morning. Thanks. Sent from Mail for Windows 10

3 3

[arch-general] Ansible integration for nosh service management
by Thomas Caravia 22 Oct '17

22 Oct '17

Hello, Integration for nosh service management has been added to the "system" modules of Ansible's development branch[1]. The nosh module can set running and enabled state for user or system-wide services[2], in a similar fashion to other service management modules. Testing feedback and suggestions are welcome. Archlinux users may find the nosh toolset packaged in the Archnosh repository[3]. Debian, FreeBSD and OpenBSD users should look to the packages provided by the author of nosh[4]. Regards, [1] https://github.com/ansible/ansible/blob/devel/lib/ansible/modules/system/no… [2] https://docs.ansible.com/ansible/devel/nosh_module.html [3] https://framagit.org/taca/archnosh [4] https://jdebp.eu/Softwares/nosh/debian-binary-packages.html https://jdebp.eu/Softwares/nosh/freebsd-binary-packages.html https://jdebp.eu/Softwares/nosh/openbsd-binary-packages.html

1 0

[arch-general] mouse freezes when switching between X sessions
by Robert Arkiletian 19 Oct '17

19 Oct '17

If I have two X sessions running on different accounts and I switch between them (ctrl-alt-f1 ctrl-alt-f2) a few times. I usually get a frozen mouse in one of the two X sessions. I then must shutdown that X session and run it again (startx) to get my mouse working again in that account. Any ideas how to diagnose the issue, much appreciated. Thanks

3 3

[arch-general] Can we please have a co-maintainer ...
by Rob Til Freedmen 16 Oct '17

16 Oct '17

... for these long outdated packages? https://www.archlinux.org/packages/?sort=-last_update&q=&maintainer=schiv&f… https://www.archlinux.org/packages/?sort=-last_update&q=&maintainer=speps&f…

15 25

[arch-general] Server Management Tools
by siefke_listen＠web.de 13 Oct '17

13 Oct '17

Hello, Is there a way to automatically administer multiple arch Linux servers? It's annoying to provide 20 servers daily with the same commands. Are there possibilities to manage the daily tasks centrally and to set them off automatically? I know there are tools like puppets but they're too cluttered. Thank you for help. Silvio

8 11