- Arch-general - lists.archlinux.org

[arch-general] Really about tty !
by Philippe Delavalade 09 Nov '21

09 Nov '21

Hi. By default, six ttys are defined but I would have more ; in distros with sysv there was an /etc/inttab file defining consoles and it was simple to define more. I didn't find info in the wiki ; I pretty sure my method to search is bad but... Regards. -- Philippe

3 3

[arch-general] Users in mariadb
by Philippe Delavalade 09 Nov '21

09 Nov '21

Hello dear list. I had a look to the mysql.user table and found four users at localhost ; two of them seem odd to me : 1 mariadb.sys with no password 2 mysql with the password 'invalid'. I guess I can delete user 'mysql'@'localhost' but what about 'mariadb.sys'@'localhost' ? In the slackware box, those users don't exist. Thanks for advise. Regards. -- Philippe

1 0

[arch-general] About tty
by Philippe Delavalade 08 Nov '21

08 Nov '21

Hi list. I'm new with archlinux and especially systemd. I'm using linux since around twenty years, so i'm not realy newbie but... I have many questions but I'll ask one by one. I read wiki about systemctl and I'm not sure to have understood everything :-( For instance, to have a daemon at boottime, I have tried : systemctl enable --now ... It seems to be OK with ntp, fcron and NetworkManager. But with mariadb I obtain a failure. Job for mariadb.service failed because the control process exited with error code. See "systemctl status mariadb.service" and "journalctl -xeu mariadb.service" for details. I tried systemctl status mariadb and obtained × mariadb.service - MariaDB 10.6.4 database server Loaded: loaded (/usr/lib/systemd/system/mariadb.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Mon 2021-11-08 18:03:16 CET; 1min 47s ago Docs: man:mariadbd(8) https://mariadb.com/kb/en/library/systemd/ Process: 515 ExecStartPre=/bin/sh -c systemctl unset-environment _WSREP_START_POSITION (code=exited, status=0/SUCCESS) Process: 516 ExecStartPre=/bin/sh -c [ ! -e /usr/bin/galera_recovery ] && VAR= || VAR=`cd /usr/bin/..; /usr/bin/galera_recovery`; [ $? -eq 0 ] && systemctl set-environment _WSREP_START_POSITION=$VAR || exit 1 (code=exited, status=0/SUCCESS) Process: 524 ExecStart=/usr/bin/mariadbd $MYSQLD_OPTS $_WSREP_NEW_CLUSTER $_WSREP_START_POSITION (code=exited, status=1/FAILURE) Main PID: 524 (code=exited, status=1/FAILURE) Status: "MariaDB server is down" CPU: 95ms nov. 08 18:03:15 messier31 mariadbd[524]: 2021-11-08 18:03:15 0 [Note] InnoDB: Buffer pool(s) load completed at 211108 18:03:15 nov. 08 18:03:15 messier31 mariadbd[524]: 2021-11-08 18:03:15 0 [ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist nov. 08 18:03:15 messier31 mariadbd[524]: 2021-11-08 18:03:15 0 [Note] Server socket created on IP: '0.0.0.0'. nov. 08 18:03:15 messier31 mariadbd[524]: 2021-11-08 18:03:15 0 [Note] Server socket created on IP: '::'. nov. 08 18:03:15 messier31 mariadbd[524]: 2021-11-08 18:03:15 0 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.db' doesn't exist nov. 08 18:03:15 messier31 mariadbd[524]: 2021-11-08 18:03:15 0 [ERROR] Aborting nov. 08 18:03:16 messier31 mariadbd[524]: Warning: Memory not freed: 280 nov. 08 18:03:16 messier31 systemd[1]: mariadb.service: Main process exited, code=exited, status=1/FAILURE nov. 08 18:03:16 messier31 systemd[1]: mariadb.service: Failed with result 'exit-code'. nov. 08 18:03:16 messier31 systemd[1]: Failed to start MariaDB 10.6.4 database server. Those messages don't help me. Can someone tell me more ? Regards. -- Philippe

3 3

[arch-general] Apologies
by Philippe Delavalade 08 Nov '21

08 Nov '21

I'm sorry for my preceeding subject ; it should have been « about mariadb » ; tty is for the next question :-) -- Philippe

1 0

[arch-general] DST-related log messages?
by David Rosenstrauch 08 Nov '21

08 Nov '21

We switched from Daylight Savings back to Standard time in my locale last night. (EDT -> EST) My system did seem to update, as it has the correct time. However, I was looking through the logs to see if it wrote any messages regarding the time changing, but didn't see any. I also don't see any record of where the time got rolled back. (i.e., 03.00 -> 02.00) Anyone know what (if anything) gets written to the logs that would show this change? Thanks, DR

2 2

[arch-general] [arch-gen] Qt wayland DEs?
by Javier 08 Nov '21

08 Nov '21

I'm currently using LXQt + KWin. LXQt is not landing in Wayland any time soon. There's no hurry, but I would like to know about other non plasma Qt DEs working on Wayland. I'm aware on Liri, however I don't know how light it is compared to LXQt + K Win, or Plasma itself, and also how usable/stable it is. One concern is performance, responsiveness, and resources usage, given it's not exactly based on Qt, but rather QML instead. I read about another Qt DE working on Wayland, paperDE, however it uses Wayfire instead of KWin, and I'd prefer using KWin and compositor, but there's currently no DE offering such combination, except by Plasma, or so it seems... Again, I'd like to know how usable/stable it is, how light it is, and how does it compare to LXQt (Xorg it'll be, given its lack of Wayland support), and how it compares in terms of performance, responsiveness and resources. Liri, by being the 1st Qt DE, has the most amount of time dealing with Wayland, it should be quiet usable/stable, compared to the newcomers, but that might only be a bad supposition. Is there any other DE I might be missing, hopefully using KWin and oriented toward being as light as it could be? BTW, just in case that counts, I only planning to be able to use pipewire for screen/desktop sharing, and not for audio at all, since I prefer plain alsa, so I don't want a strict requirement for pipewire audio support. Thanks a lot ! -- Javier

3 5

[arch-general] [arch-gen][flake8] flake8.main.git module no longer available on flake8 v. 1:4.0.1-1, breaking pre-commit flake8 hooks
by Javier 04 Nov '21

04 Nov '21

Today I upgraded the system, and got a new flake8 version: > [2021-11-03T02:29:18-0600] [ALPM] upgraded flake8 (1:3.9.2-2 -> 1:4.0.1-1) However that version no longer provides the flake8.main.git module, therefore now I get a failure when trying to commit something (using the flake8 pre-commit hook the work project uses): > % git ci --amend > INFO | Running hook pre-commit.d/02-check_flake8... > ERROR | Traceback (most recent call last): > File "/home/vasqueja/scm/hpe/git/provision-sdk/.git/hooks/pre-commit.d/02-check_flake8", line 25, in <module> > from flake8.main.git import (config_for, update_excludes, > ModuleNotFoundError: No module named 'flake8.main.git' > ERROR | Hook pre-commit.d/02-check_flake8 failed. Aborting... Is there a way to overcome this? Is there sort of a new packet covering for that functionality? I don't see any new optional dependency which might have covered for the missing module: > Depends On : python-pyflakes python-mccabe python-pycodestyle python-entrypoints > Optional Deps : None > Required By : python-flake8-polyfill Thanks ! -- Javier

2 2

[arch-general] NEW RECORD! 769 packages out of date
by Billy Morgan 04 Nov '21

04 Nov '21

https://archlinux.org/packages/?sort=flag_date&flagged=Flagged

18 32

Re: [arch-general] Fwd: A plea for communication from Arch devs & maintainers
by mar77i 04 Nov '21

04 Nov '21

https://steamuserimages-a.akamaihd.net/ugc/845963002482323312/1450A49B560D3… Sent with ProtonMail Secure Email.

2 1

Re: [arch-general] Fwd: A plea for communication from Arch devs & maintainers
by Jonas Witschel 04 Nov '21

04 Nov '21

On 2021-11-04 00:01, Sam Mulvey wrote: > Instead, I have a counter-offer. If what I'm saying has any merit whatever, > why doesn't someone from the Arch team contact me? I literally know no one > in the community, and my abortive attempts to interface have been a > failure. Why not show me the ropes and prove to me that I'm actually quite > wrong about this? I would argue that all these emails have been trying to contact you, including one I sent to you in private. Given the tone of your last emails as well as the fact that you have completely ignored both my last public and private email, I am afraid to say that you do not seem to be interested in a productive discussion to me. Best, Jonas -- Jonas Witschel Arch Linux Developer, Trusted User and security team member PGP key: FE2E6249201CA54A4FB90D066E80CA1446879D04

1 0