- Arch-general - lists.archlinux.org

[arch-general] hal has lost its mind again.
by David C. Rankin, J.D.,P.E. 21 May '09

21 May '09

Listmates, On my laptop, automounting of usb drives and mmc/sd cards were working fine, now I get the "...mount.removable no <-- (action, result)" Full error dialog: http://www.3111skyline.com/download/Archlinux/bugs/hal-mount.removable.jpg The system configures the drives or cards just fine, it just will not create the directory under /media to allow access. It is really ironic because the drives/cards are fully accessible under "media:/". So, nothing in "/media", but OK in "media:/". I am concerned that changes made in /etc/hal/fdi/policy/20-ntfs-config-write-policy.fdi to allow NTFS mounts messed something else up. The file contains: <deviceinfo version="0.2"> <device> <match key="volume.fstype" string="ntfs"> <match key="@block.storage_device:storage.hotpluggable" bool="true"> <merge key="volume.fstype" type="string">ntfs-3g</merge> <merge key="volume.policy.mount_filesystem" type="string">ntfs-3g</merge> </match> </match> </device> </deviceinfo> which is straight from the wiki. The everything log contains the following: May 17 02:50:23 alchemy kernel: tifm_core: MMC/SD card detected in socket 0:1 May 17 02:50:23 alchemy kernel: mmc1: new SD card at address e624 May 17 02:50:23 alchemy kernel: isa bounce pool size: 16 pages May 17 02:50:23 alchemy kernel: mmcblk0: mmc1:e624 SD02G 1.89 GiB May 17 02:50:23 alchemy kernel: mmcblk0: p1 May 17 02:55:20 alchemy hald: mounted /dev/mmcblk0p1 on behalf of uid 0 May 17 03:06:54 alchemy kernel: ACPI: EC: missing confirmations, switch off interrupt mode. I don't know if the ACPI kernel message is evidence of the problem, but I included it just in case. I am slowly trying to make friends with hal/dbus, but I could use any help you can give in sorting this out. Thanks. -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com

5 15

[arch-general] Arch Linux on Go-OO download page?
by Ondřej Kučera 21 May '09

21 May '09

Hello, a couple of Linux distributions are mentioned at http://go-oo.org/download/ with a short info about how to install it. However, Arch Linux is not among them. I expect that if someone wrote them that Arch Linux has Go-OO in its repository as well, they'd be willing to add that message there. I'd write them myself but I suppose it would be better if it was done by someone "more official" (e. g. a developer). Opinions? Ondřej -- Cheers, Ondřej Kučera

2 1

[arch-general] kde dark themes
by David C. Rankin, J.D.,P.E. 21 May '09

21 May '09

kdeusers, If you haven't tried a dark theme for your kde desktop yet, you are missing out on some really cool looks. I toyed with dark themes over the years, but never really found one that worked. After being inspired to try again by senior Rosenstrauch posted one to the list, I took another look and came up with something I really like. It consists of color-themes for kde, emerald, and kate/kwrite. Other than that you just need to change the foreground color for konqueror and any of your web browsers, etc. I'll just post the links to the themes since you can't post it all here. Give it a shot, I bet you will like it. Small screenshots of the desktop theme and kicker background: http://www.3111skyline.com/download/Archlinux/kde/screenshots/kde-dark-them… http://www.3111skyline.com/download/Archlinux/kde/screenshots/kickersteel.j… kde color-schemes (import under kde control center -> colors): http://www.3111skyline.com/download/Archlinux/kde/color-themes/dcr-Blue.kcs… emerald theme for compiz (import in emerald theme manager): http://www.3111skyline.com/download/Archlinux/emerald/dcr%20Dark%20Blue-Gra… kate/kwrite/quanta color scheme (put in ~/.kde/share/config): http://www.3111skyline.com/download/Archlinux/kde/kateschemarc A kicker background (kde control center -> Desktop -> Panel -> Appearance): http://www.3111skyline.com/download/Archlinux/kde/kicker/kickersteelarch2.p… There are a few alternate themes and backgrounds in the above directories, so you can pick and choose if you like. And DR, since you started this whole thing, and I appreciate it, if you notice the "R" icon on my kicker panel that is set atop flames, I've put two sizes on the server (40x40 and 140x140) just in case you have a use for them ;-) See: http://www.3111skyline.com/download/Archlinux/kde/icons/ -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com

2 1

[arch-general] pan crashes with bug report
by Baho Utot 20 May '09

20 May '09

pan is crashing when I try to send a reply to any news group This is the bug report from bug-buddy System: Linux 2.6.29-ARCH #1 SMP PREEMPT Sat May 9 12:47:43 UTC 2009 i686 X Vendor: The X.Org Foundation X Vendor Release: 10601000 Selinux: No Accessibility: Disabled GTK+ Theme: Clearlooks Icon Theme: gnome GTK+ Modules: canberra-gtk-module, gnomebreakpad Memory status: size: 0 vsize: 0 resident: 0 share: 0 rss: 0 rss_rlim: 0 CPU usage: start_time: 0 rtime: 0 utime: 0 stime: 0 cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 0 ----------- .xsession-errors (76 sec old) --------------------- camel-imap-provider-Message: Unable to load summary: no such table: Trash Unmatched element: citerefentry Unmatched element: refentrytitle Unmatched element: citerefentry Unmatched element: refentrytitle ** (evolution:4230): DEBUG: mailto URL command: evolution %s ** (evolution:4230): DEBUG: mailto URL program: evolution camel-imap-provider-Message: Unable to load summary: no such table: Drafts camel-imap-provider-Message: Unable to load summary: no such table: Kumusta camel-imap-provider-Message: Unable to load summary: no such table: Trash -------------------------------------------------- MDRawHeader Any help with this?

1 0

[arch-general] :: Starting acpid -- acpid: can't open /proc/acpi/event: Device or resource busy
by David C. Rankin, J.D.,P.E. 20 May '09

20 May '09

Listmates, I am chasing down an issue with the radeonhd driver to force downclocking of the gpu. In my Xog.0.log I am receiving the message: (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) I have installed acpid, but acpid will not start and gives the following error: [10:24 alchemy:/home/david] # /etc/rc.d/acpid start :: Starting acpid [BUSY] acpid: can't open /proc/acpi/event: Device or resource busy [FAIL] What's the trick with acpid? -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com

2 1

[arch-general] Can't compile digikam 0.10 on archlinux.
by Markus Golser 20 May '09

20 May '09

Hi I try to build digikam 0.10 on archlinux. I have kdegraphics 4.2.3-1 installed and still can't compile digikam sudo abs cp -r /var/abs/extra/digikam/ /tmp cd /tmp/digikam/ makepkg PKGBUILD -- The C compiler identification is GNU -- The CXX compiler identification is GNU -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Looking for Q_WS_X11 -- Looking for Q_WS_X11 - found -- Looking for Q_WS_WIN -- Looking for Q_WS_WIN - not found. -- Looking for Q_WS_QWS -- Looking for Q_WS_QWS - not found. -- Looking for Q_WS_MAC -- Looking for Q_WS_MAC - not found. -- Found Qt-Version 4.5.1 (using /usr/bin/qmake) -- Looking for XOpenDisplay in /usr/lib/libX11.so;/usr/lib/libXext.so;/usr/lib/libXft.so;/usr/lib/libXau.so;/usr/lib/libXdmcp.so;/usr/lib/libXpm.so -- Looking for XOpenDisplay in /usr/lib/libX11.so;/usr/lib/libXext.so;/usr/lib/libXft.so;/usr/lib/libXau.so;/usr/lib/libXdmcp.so;/usr/lib/libXpm.so - found -- Looking for gethostbyname -- Looking for gethostbyname - found -- Looking for connect -- Looking for connect - found -- Looking for remove -- Looking for remove - found -- Looking for shmat -- Looking for shmat - found -- Looking for IceConnectionNumber in ICE -- Looking for IceConnectionNumber in ICE - found -- Found X11: /usr/lib/libX11.so -- Looking for include files CMAKE_HAVE_PTHREAD_H -- Looking for include files CMAKE_HAVE_PTHREAD_H - found -- Looking for pthread_create in pthreads -- Looking for pthread_create in pthreads - not found -- Looking for pthread_create in pthread -- Looking for pthread_create in pthread - found -- Found Threads: TRUE -- Found Automoc4: /usr/bin/automoc4 -- Found Perl: /usr/bin/perl -- Performing Test _OFFT_IS_64BIT -- Performing Test _OFFT_IS_64BIT - Failed -- Performing Test HAVE_FPIE_SUPPORT -- Performing Test HAVE_FPIE_SUPPORT - Success -- Performing Test __KDE_HAVE_W_OVERLOADED_VIRTUAL -- Performing Test __KDE_HAVE_W_OVERLOADED_VIRTUAL - Success -- Performing Test __KDE_HAVE_GCC_VISIBILITY -- Performing Test __KDE_HAVE_GCC_VISIBILITY - Success -- Phonon Version: 4.3.0 -- Found Phonon: /usr/lib/libphonon.so -- Found Phonon Includes: /usr/include/KDE;/usr/include -- Found KDE 4.2 include dir: /usr/include -- Found KDE 4.2 library dir: /usr/lib -- Found the KDE4 kconfig_compiler preprocessor: /usr/bin/kconfig_compiler -- Found automoc4: /usr/bin/automoc4 -- checking for module 'lcms' -- found lcms, version 1.18 -- Found lcms version 1.18, /usr/lib/liblcms.so -- Found JPEG: /usr/lib/libjpeg.so -- Found ZLIB: /usr/lib/libz.so -- Found PNG: /usr/lib/libpng.so -- Found TIFF: /usr/lib/libtiff.so -- Found Jasper: /usr/lib/libjasper.so -- Check Kdcraw library in local sub-folder... -- Check Kdcraw library using pkg-config... -- WARNING: you are using the obsolete 'PKGCONFIG' macro use FindPkgConfig -- PKGCONFIG() indicates that libkdcraw is not installed (install the package which contains libkdcraw.pc if you want to support this feature) -- Check Kexiv2 library in local sub-folder... -- Check Kexiv2 library using pkg-config... -- WARNING: you are using the obsolete 'PKGCONFIG' macro use FindPkgConfig -- PKGCONFIG() indicates that libkexiv2 is not installed (install the package which contains libkexiv2.pc if you want to support this feature) -- Check Kipi library in local sub-folder... -- Check Kipi library using pkg-config... -- WARNING: you are using the obsolete 'PKGCONFIG' macro use FindPkgConfig -- Found libkipi release < 0.2.0, too old -- Found gphoto2: -L/usr/lib -lgphoto2_port;-L/usr/lib -lgphoto2 -lgphoto2_port -lm -- checking for module 'libkdcraw>=0.4.0' -- package 'libkdcraw>=0.4.0' not found -- checking for module 'libkexiv2>=0.5.0' -- package 'libkexiv2>=0.5.0' not found -- Found KdepimLibs: /usr/lib/cmake/KdepimLibs-4.2.3/KdepimLibsConfig.cmake -- WARNING: you are using the obsolete 'PKGCONFIG' macro use FindPkgConfig -- Found LensFun: /usr/include -- -- ---------------------------------------------------------------------------------- -- digiKam 0.10.0 dependencies results <http://www.digikam.org> -- -- Qt4 SQL module found................ YES -- libjpeg library found............... YES -- libtiff library found............... YES -- libpng library found................ YES -- libjasper library found............. YES -- liblcms library found............... YES -- libkipi library found............... NO -- CMake Error at CMakeLists.txt:175 (MESSAGE): digiKam needs libkipi library >= 0.2.0. You need to install libkipi first -- libkipi website is at http://www.digikam.org/sharedlibs -- -- libkexiv2 library found............. NO -- CMake Error at CMakeLists.txt:185 (MESSAGE): digiKam needs libkexiv2 library >= 0.5.0. You need to install libkexiv2 first -- libkexiv2 website is at http://www.digikam.org/sharedlibs -- -- libkdcraw library found............. NO -- CMake Error at CMakeLists.txt:195 (MESSAGE): digiKam needs libkdcraw library >= 0.4.0. You need to install libkdcraw first -- libkdcraw website is at http://www.digikam.org/sharedlibs -- -- libgphoto2 library found............ YES -- libkdepimlibs library found......... YES (optional) -- libmarblewidget library found....... NO (optional) -- -- digiKam will be compiled without geolocation using Marble widget support. -- -- liblensfun library found............ YES (optional) CMake Error at CMakeLists.txt:269 (MESSAGE): digiKam will be compiled............ NO (Look README file for more details about dependencies) -- Configuring incomplete, errors occurred!

1 0

[arch-general] Firefox bug that may be Arch specific
by Emmanuel Benisty 20 May '09

20 May '09

Hi List, Just for information, there has been already two bug reports in Bugzilla that mention a bug in the display size of textboxes. Until now, only Archers seems to suffer from this bug and one of the mozilla developers has marked this issue as specific to Arch. Therefore, I thought it could be interesting to let Arch developers and users to be informed about this. https://bugzilla.mozilla.org/show_bug.cgi?id=491114 Thanks+regards.

5 5

[arch-general] Marking a package as a dependency
by Magnus Therning 20 May '09

20 May '09

I just recently bothered reading part of pacman's man page and found that I probably should have performed a `pacman -U --asdeps mypkg.tar.gz` as I installed dependencies for packages I build manually. However I didn't, so can I retro-actively change the reason-for-installation of an already installed package without re-installing it? (No, I couldn't decipher whether the man page already tells me how to do this :-) /M -- Magnus Therning (OpenPGP: 0xAB4DFBA4) magnus＠therning．org Jabber: magnus＠therning．org http://therning.org/magnus identi.ca|twitter: magthe

3 2

[arch-general] Building local repo - eliminating dups - why some new x86_64?
by David C. Rankin, J.D.,P.E. 20 May '09

20 May '09

Listmates, I'm building a local repo for boxes to update via the lan instead of redownloading. I have my repo on my local server as: arch/ x86/ x86_64/ I have moved all files for my two x86_64 boxes to the arch/x86_64 dir and I am filtering with a script to eliminate dups by moving the lesser numbered packages to arch/x86_64/oldpkgs. Testing the script before the actual move of packages, I ran across this anomaly in some filenames: (script output) [1] <snip> ttf-isabella-1.003-3.pkg.tar.gz -> oldpkgs ttf-isabella-1.003-4-x86_64.pkg.tar.gz tunepimp-0.5.3-5.pkg.tar.gz -> oldpkgs tunepimp-0.5.3-6-x86_64.pkg.tar.gz tzdata-2009f-1-x86_64.pkg.tar.gz -> oldpkgs tzdata-2009g-1-x86_64.pkg.tar.gz unrar-3.8.5-2-x86_64.pkg.tar.gz -> oldpkgs unrar-3.9.1-1-x86_64.pkg.tar.gz <snip> As shown above, there are multiple packages where the earlier version did *not* contain the x86_64 designation where the current package now does. Are these the same packages? If so why did earlier packages not have the x86_64 and when was the architecture added? Are all packages now going to have the architecture specified? Footnotes: [1] Filtering done by a simple look ahead and the output created as follows: PKGFILES=( $(ls -1 /home/backup/archlinux/x86_64) ) for ((i=0;i<${#PKGFILES[@]}-1;i++)); do if [[ ${PKGFILES[$i]%%-[[:digit:]]*} == ${PKGFILES[$i+1]%%-[[:digit:]]*} ]]; then echo -e "${PKGFILES[$i]} -> oldpkgs\n${PKGFILES[$i+1]}\n" fi -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com

7 12

[arch-general] broken john package
by Sébastien Duquette 18 May '09

18 May '09

The package for john is broken, it is missing files that make it unusable. I filled a bug report (http://bugs.archlinux.org/task/14422) a month ago and other users complained about this issue. The current maintainer is andrea and the package was last updated on april 8th. Can someone please fix this ? Thanks, Sébastien

2 2