- Arch-general - lists.archlinux.org

[arch-general] pacman question - missing files (repost)
by Genes Lists 09 Jun '16

09 Jun '16

(Reposting in plain text - so sorry - been using thunderbird which automatically does that for mail lists - now with it's impending demise I am trying other mailers - like evolution ... ) I've seen this behavior a couple of times now. Here's what happened today. After installing systemd and libsystemd 230-4 (updating from 230-3). No errors reported. However computer refused to boot properly. Booting recovery and examining the logs showed that libsystemd.so was missing - complaint by udev. /usr/lib/libsystemd.so was present as a link pointing to libsystemd.so.0.15.0 which was absent. running pacman -Qk libsystemd confirmed the problem file. reinstalling libsystemd from cache - in recovery chroot - gave a warning about the link and the the libraryfile something like - warning: could not get file information for /usr/lib/libsystemd.so and .same for .so.0.15.0 And indeed the file was still absent. from same cachea rea I installed libsystemd and systemd 230-3 (i.e. downgrading) - this worked and the library is back now and I could boot with udev dying a squirrely death. I have had same problem (missing files with no warnings) with other updates - last time was glibc - that was fun to fix ... konsole wont start without glibc There were other less impactful ones in recent months - about time pacman 5 moved to testing - not saying its pacman itself - but something is amiss - could be hardware, kernel or ?? I have no errors in the log files. and do not see any issues from smartctl either. In all cases pacman -Qk finds the problem - and in all cases there were no errors reported on initial install -and there were similar warnings as zbove on re-install of same package from cache file. In every case there was a shared library with a sym link - and the actual library file was missing. Any suggestions for tracking this down? I assume if the package file was corrupted pacman would complain and redownload - so I'm a bit stumped ... thanks for any guidance. gene

1 0

[arch-general] DKMS question around removal of kernel modules
by Genes Lists 08 Jun '16

08 Jun '16

When I install a new kernel, I notice that DKMS removes previous kernel modules as well as adding them to the new kernel. In the real old days these were not removed at all - so removal is a good thing. The issue is that the old kernel is still running and until machine is rebooted the modules wont be available I would think. I wonder - Is there a way to mark the deletion to happen after the new kernel is booted ? I may well be missing something of course. Installed 4.6.2 kernel while 4.6.1 running - pacman says: (1/1) Remove DKMS modules ==> dkms -q remove -q -m vboxguest -v 5.0.20_OSE -k 4.6.1-2-ARCH ==> dkms -q remove -q -m vboxhost -v 5.0.20_OSE -k 4.6.1-2-ARCH ...==> dkms -q install -m vboxguest -v 5.0.20_OSE -k 4.6.2-1-ARCH ==> dkms -q install -m vboxhost -v 5.0.20_OSE -k 4.6.2-1-ARCH ... Thanks for any thoughts. gene

4 4

[arch-general] Update delayed for more of two months, Lyx v2.1.4
by Xavier Corredor Llano 08 Jun '16

08 Jun '16

Hi guys, After more than two months ago Lyx [1] released the version 2.1.4 [2], this is a minor and maintenance release (strongly recommended), in august, and after flagged as out-date and wait some days, I contacted with the maintainer (Ronald) and he didn't answer me (I understand, maybe he is busy) I tested for more of two months and this release work fine, I would like to be the maintainer of this package but I am not TU. Regards [1] https://www.archlinux.org/packages/extra/x86_64/lyx/ [2] http://www.lyx.org/News -- Xavier Corredor Llano ---------- Forwarded Message ---------- Subject: Lyx 2.1.4 Date: Saturday, August 15, 2015, 07:11:42 PM From: Xavier Corredor Llano <xavier.corredor.llano(a)gmail.com> To: ronald(a)archlinux.org Hi Ronald! I have tested the Lyx [1] version 2.1.4 with the PKGBUILD attachment and work fine. Regards [1] https://www.archlinux.org/packages/extra/x86_64/lyx/ -- Xavier Corredor Llano -----------------------------------------

3 3

[arch-general] Where to put info about Install Problem w/Partitioning due to Prior VMFS_volume & Hardware RAID?
by David C. Rankin 05 Jun '16

05 Jun '16

Archdevs, I wanted to drop a note in the wiki about how to deal with reuse of drives that have either prior VMFS_Volume filesystem (GPT table) or hardware RAID information on the disk. I was converting the drives to mdraid and ran into a number of failures converting to MBR. They were two separate but related issues that caused mdadm to be unable to use the drives. e.g. root@archiso ~ # blkid /dev/sr0: UUID="2016-03-01-15-50-36-00" LABEL="ARCH_201603" TYPE="iso9660" PTUUID="2237702c" PTTYPE="dos" /dev/sda: UUID="LSI ^P" TYPE="ddf_raid_member" /dev/loop0: TYPE="squashfs" /dev/sdb: UUID="LSI ^P" TYPE="ddf_raid_member" /dev/md126: PTUUID="b6fbd994" PTTYPE="dos" (the VMFS_Volume info was shown in cfdisk) The VMFS information and LSI Megaraid infor was removed by overwriting the first 8M of the first partition with dd, e.g.: root@archiso ~ # dd if=/dev/zero of=/dev/sda1 bs=8M count=1 1+0 records in 1+0 records out 8388608 bytes (8.4 MB, 8.0 MiB) copied, 0.01363 s, 615 MB/s Zapping the GPT partition (with gdisk) was required to remove all parts of the GPT partition before the disks could be used by mdadm (I didn't know GPT wrote partition information to both the beginning and end of the disk and couldn't simply be removed with tools like fdisk or cfdisk, but required a tool that could zap all GPT info. root@archiso ~ # gdisk /dev/sda GPT fdisk (gdisk) version 1.0.1 Partition table scan: MBR: MBR only BSD: not present APM: not present GPT: present Found valid MBR and GPT. Which do you want to use? 1 - MBR 2 - GPT 3 - Create blank GPT This info didn't seem right as a not on the beginner's page, it didn't fit nicely on the RAID wiki either (even though that seemed like the appropriate spot) and didn't fit on the Partitioning wiki either (that page had nothing related to disk reuse) It seems like this is worth noting for anyone else attempting to reuse disks from a prior VMWare or hardware raid config. What say the devs? Is there a proper place for it? Or should we just leave everyone to search the web for this info? -- David C. Rankin, J.D.,P.E.

1 0

[arch-general] Missing gpg key?
by Sławomir Szczyrba 03 Jun '16

03 Jun '16

Hello. I try to recompile lib32-libgcrypt - because of this annoying error: libGL: dlopen /usr/lib32/xorg/modules/dri/radeonsi_dri.so failed (/usr/lib32/libgcrypt.so.20: symbol gpgrt_lock_lock, version GPG_ERROR_1.0 not defined in file libgpg-error.so.0 with link time reference) and makepkg says : [steev]/tmp/lib32-libgcrypt > LC_ALL=C LANG=en makepkg ==> Making package: lib32-libgcrypt 1.7.0-1 (Fri Jun 3 20:47:43 CEST 2016) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Found libgcrypt-1.7.0.tar.bz2 -> Found libgcrypt-1.7.0.tar.bz2.sig ==> Validating source files with sha1sums... libgcrypt-1.7.0.tar.bz2 ... Passed libgcrypt-1.7.0.tar.bz2.sig ... Skipped ==> Verifying source file signatures with gpg... libgcrypt-1.7.0.tar.bz2 ... FAILED (unknown public key 2071B08A33BD3F06) ==> ERROR: One or more PGP signatures could not be verified! All keys refreshed: gpg: refreshing 85 keys from hkp://pool.sks-keyservers.net [...] gpg: Total number processed: 84 gpg: unchanged: 84 Missing key, or sth went really wrong? Regards Sławek

4 4

[arch-general] ocaml package out of date
by phimosis haver 02 Jun '16

02 Jun '16

"The most recent version of OCaml is 4.03.0. It was released on 2016-05-25." https://www.archlinux.org/packages/extra/x86_64/ocaml/ is a super old version.

4 3

[arch-general] Arch Linux website down
by Florian Pritz 01 Jun '16

01 Jun '16

Hi, We are currently experiencing some technical problems with the webserver for archlinux.org, bugs.archlinux.org, patchwork.archlinux.org. We are working on it, but resolving this problem could take a while. The mailinglists, AUR, wiki and forums are hosted on a different machine and are still available. If you want to download an Arch Linux ISO, you can still do that via our mirrors. If you don't know any mirror URL, you can use this one: https://mirrors.kernel.org/archlinux/iso/ We are sorry for the inconvenience. Florian

3 3

[arch-general] Enable translations in transmission-qt
by Alexey Rochev 31 May '16

31 May '16

Hi, I posted fixed PKGBUILD in https://bugs.archlinux.org/task/20982 a week ago, but it seems that no one noticed. Here is the patch: http://pastebin.com/b483Rqjp

2 2

[arch-general] Builds for influxdata
by Óscar García Amor 31 May '16

31 May '16

Hello all, I make some builds for influx suite that could be added to community. https://git.connectical.com/aur/influxdb https://git.connectical.com/aur/telegraf https://git.connectical.com/aur/grafana I have to make chronograf too, but not have free license. https://git.connectical.com/aur/chronograf I think that this could help. Greetings. -- Óscar García Amor | ogarcia at moire.org | http://ogarcia.me

1 0

[arch-general] systemctl problems with enable,disable,start,stop
by Maykel Franco 30 May '16

30 May '16

Hi, I have installed archlinux from zero. And when I enable anything service the command is slow and i get this error: [root@arch-kodi-nas maykel]# systemctl enable network(a)enp2s0.service Error getting authority: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: Timeout was reached (g-io-er ror-quark, 24) Created symlink from /etc/systemd/system/multi-user.target.wants/network(a)enp2s0.service to /etc/systemd/system/network@.service. [root@arch-kodi-nas maykel]# systemctl enable sshd Error getting authority: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: Timeout was reached (g-io-er ror-quark, 24) Is the bug in systemctl? I have installed archlinux un my notebook from 4 years ago and no problems. Thanks in advanced.

5 11