- Arch-general - lists.archlinux.org

[arch-general] Forgot username and password
by Bhushan Shah 06 Jun '14

06 Jun '14

Hello I registered to Arch Linux bug tracking using this email address long ago but I forgot my username and password. Can anyone send me my credentials? Thanks! -- Bhushan Shah http://bhush9.github.io IRC Nick : bshah on Freenode

2 2

[arch-general] spamassassin and perl-net-dns fail to find nameserver
by Florian Pritz 06 Jun '14

06 Jun '14

Hi, I've worked around the error caused by net-dns being a developer release, but SA still fails to find nameservers so DNSBL checks will not be used. If you have the same problem add 'dns_server 127.0.0.1' or similar to your /etc/mail/spamassassin/local.cf or better yet figure out why it fails and contact the right people. I currently don't have enough time to take a good look at the issue, but I figured I should probably write this so you can at least properly block spam. Happy mailing and sorry for all the perl breakage. Ideas on how to prevent them (library soname? sadly that seems unsupported by upstream afaict) are very welcome.

2 1

[arch-general] 'grub_term_highlight_color' not found
by Dimitris Zervas 05 Jun '14

05 Jun '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 So, yesterday night, I decided to update my system. I had 4-5 hours to deal with all the nuclear blast that an update of 3 months would cause (the good old arch we all love... I don't know which is worse, rm -rm / or pacman -Syu?). After 10-20 everything was updated and decided to restart. Also, I wanted to change the boot order of my UEFI and boot arch by default instead of win (finals are over). I made the change and saved. The scree was blank for ~10s and I decided to hard reboot. BOOM. The uefi entry was lost. Also, if I launched grub2 as a uefi shell (which I have for times like that) I got "error: symbol 'grub_term_highlight_color' not found" and grub gives me a rescue terminal. The first problem (uefi entry) is very painful. I have an Asus P9X79 Deluxe. It does NOT support v2 uefi shell (so, no bcfg) and no matter how hard I try to add an entry with efibootmgr, nothing happens (via SysResCD, uefi mode boot with modprobe efivars) The second problem (grub pukes) I have no clue what's going on. I just updated, even tried grub-mkconfig via chroot and nothing changed. I found 2 threads on arch forums which where not helpful at all. Any help appreciated :) -----BEGIN PGP SIGNATURE----- Version: APG v1.1.1 iQJCBAEBCgAsBQJTkC/tJRxEaW1pdHJpcyBaZXJ2YXMgPGR6ZXJ2YXNAZHplcnZh cy5ncj4ACgkQ+77hPkfJypZSeA/8DcxVPg+WWDva/E2hfjX5e1OFTMJbxcweWmBG hDoNDShtm1sDfJ057fmidYqozud6ytNpug9qu+ixIBCRqmOfETjcSogNkr09Dfs5 zr0Opm15AQDlCmXcnfFWY8cPeEl8I+LqdoJM5RMM3Z6an6QmvVETdxVQ6wxouVgL AvHd7Lk/aNAYLN6uI8JFBOX0H9CzjCB/sviYmOwmVkFZLlVOKkJiYpWHL8p4pUCp Wf+2CUu42wvvvaSdrdiddc1WVHcCknr1HEYK4juiJCCgCUldUwRZGXJiS2j/0ZH/ L+VoufUMqlc+NWjV67PtwhmtVl9jvrcymAA2UOAnrWAvZZjynMyFIspdDiBffWP+ Cw+01oubUDPW2NI/9HiLm2u0QohemlYHPoFoM1a5nhsXG0pC/6qqzT0DEy3K2pl2 a+FkNum8KVl6vmtS3JXvXeH1HRKJ6aIK7qSinATKjK/Ust7saC0TsHZieWSNqZ+v 7OFOd5IYkMJyKxBuwvrpcplJmfbYuSnjRwP+OYf7nsZXNKKhPjvYi5mO1hw1fHOK Bd9GMxOjOaPrQHXSl8iJ3BTUXAXcBGZ/gbXyqyx6mieWwOGuhix/IwkoVsJU2j3i 6/TsGhykK5STdMG6augYugcPkkgdjqCteJx+LHP0By45bY6e7S9WOnmpJdzubWPJ nKoE3JY= =uxTT -----END PGP SIGNATURE-----

3 4

[arch-general] Perl 5.20 in [testing]
by Florian Pritz 05 Jun '14

05 Jun '14

Hi, Perl 5.20, as any other new perl version, requires all modules that are not purely perl code to be rebuilt. We did that for all packages in our repos. For a list of upstream changes please refer to `man perldelta`. Since users probably installed some from AUR or with CPANPLUS::Dist::Arch, I wrote a script[1] that generates a local rebuild list. [1]: https://git.server-speed.net/users/flo/bin/plain/find-broken-perl-packages.… - raw.txt contains a list of files that generated an error - perl-modules.txt contains a list of modules the files belong to - perl-dists.txt contains a list of distributions - pacman.txt contains a list of pacman packages the files belong to Binaries linking with libperl.so will also need to be rebuilt. You can use lddd from devtools to find those. If you get an error that perl-scalar-list-utils can't be found when running -Syu install it with -S perl-scalar-list-utils. Seems to be a bug in pacman. Please report any issue you encounter.

5 12

[arch-general] for raid10 users
by Łukasz Michalski 05 Jun '14

05 Jun '14

Hi, Last year I had a lot of crashes on my linux box. I experienced hard reset or processes hanged in "D" state forever. It was much more likely to happen when raid0 array was resyncing. Yesterday I finally managed to track this problem and it turned out that it was related to raid10 kernel module. After applying this patch: https://lkml.org/lkml/2014/6/4/768 My problems are gone. Today I forced array resync, run kernel kompile and two VirtualBox machines with heavy I/O load. On arch linux kernel my machine hanged in 2-3 minutes. Now everything works ok. Regards, Łukasz

1 0

[arch-general] Coredumps in zsh
by Savyasachee Jha 04 Jun '14

04 Jun '14

I was trying to debug a program, and whenever I did so, I would get the output: zsh: segmentation fault (core dumped) <name-of-program> This is what I was expecting, no problem with that, but I couldn't find the location of the core dump. I searched high and low, and even tried running systemd-coredumpctl but to no avail. However, when I repeated this on bash, I got: segmentation fault (core dumped) and I got the coredump on systemd-coredumpctl. Is there any particular reason why this might be happening? I don't want to change shells only when I'm debugging. -- Savyasachee Jha *"Aerodynamics is for people whodon't know how to build engines."*

2 2

[arch-general] e2fsprogs installation failed
by Heiko Becker 04 Jun '14

04 Jun '14

Hey, today, while updating my system, the update for e2fsprogs failed with the following error message: Fehler: Konnte usr/share/locale/pl/LC_MESSAGES/e2fsprogs.mo nicht entpacken (Lzma library error: Corrupted input data) Fehler: Fehler traten auf, während e2fsprogs aktualisiert wurde Fehler: Befehl konnte nicht korrekt ausgeführt werden Fehler: Konnte den Vorgang nicht durchführen Fehler: Konnte den Vorgang nicht durchführen (Vorgang abgebrochen) Fehler sind aufgetreten, keine Pakete wurden aktualisiert. UNfortunately I can only provide the original error message in german, as LANG setting does not work because libcom_err.so is not found which belongs to e2fsprogs. What it generally says is that it could not unpack usr/share/locale/pl/LC_MESSAGES/e2fsprogs.mo because of an Lzma library error, related to corrupted data. Can someone help me out? Best regards, Heiko

3 5

[arch-general] Kernel updated to 3.14.5-1. Now my Lenovo IdeaPad hangs on boot...
by Manuel Reimer 04 Jun '14

04 Jun '14

Hello, I use "gummiboot" to boot my Notebook. So far all kernel updates worked well and I never got any problems, but for some reason the update to 3.14.5 now causes my system to no longer boot up. Can someone help me to find the reason for the problem and to get my Notebook to boot up again? Thanks in advance. Greetings, Manuel

7 10

[arch-general] evolution-ews, does it work?
by Magnus Therning 04 Jun '14

04 Jun '14

I'm seeing strange behaviour in evolution when adding an EWS account, so I'm wondering if others are having problems with it, or if the blame falls squarely on the exchange server I'm trying to connect to. My system is up-to-date: % pacman -Q|grep evolution evolution 3.12.2-1 evolution-data-server 3.12.2-1 evolution-ews 3.12.2-1 I can, seemingly successfully, configure an EWS account. During config I can fetch the OAB URL, which ought to indicate that at least something's working as it's supposed to. However, once I finish the account is nowhere to be found. Indeed, when I restart evolution I get thrown back into configuring an account again. It would be great to hear if anyone is using the standard Arch package of evolutin-ews successfully. Then I can be pretty sure that my problems are caused by our (rather clueless) sysadmins. /M -- Magnus Therning OpenPGP: 0xAB4DFBA4 email: magnus(a)therning.org jabber: magnus(a)therning.org twitter: magthe http://therning.org/magnus Most software today is very much like an Egyptian pyramid with millions of bricks piled on top of each other, with no structural integrity, but just done by brute force and thousands of slaves. -- Alan Kay

2 2

[arch-general] split packages: basic assumptions about $pkgname in prepare() and build()
by Martti Kühne 04 Jun '14

04 Jun '14

guys so, this morning I made the mistake to try building a random split package PKGBUILD from ABS with the --pkg flag. ==> Starting prepare()... /home/martti/abs/systemd/PKGBUILD: line 33: cd: libsystemd-212: No such file or directory ==> ERROR: A failure occurred in prepare(). Aborting... Wait a minute, really? After building a little tool to find packages that use $pkgname in prepare()/build() despite the fact that $pkgname isn't *necessarily* the right thing to use to build their source paths, I'm revealed 53 of a total of 400 split packages appear to be using that variable in building. Which equates to a good one in every eighth PKGBUILD of the split packages ecosystem. Now, sure, makepkg could mitigate this problem by setting $pkgname to $pkgbase for the execution of prepare() and build(), but this would first have to be instroduced upstream. My findings are listed below. cheers! mar77i /var/abs/core/systemd/PKGBUILD /var/abs/core/util-linux/PKGBUILD /var/abs/testing/pidgin/PKGBUILD /var/abs/testing/systemd/PKGBUILD /var/abs/testing/vim/PKGBUILD /var/abs/community/python-prettytable/PKGBUILD /var/abs/community/man-pages-zh/PKGBUILD /var/abs/community/luarocks/PKGBUILD /var/abs/community/grails/PKGBUILD /var/abs/community/python-werkzeug/PKGBUILD /var/abs/community/marisa/PKGBUILD /var/abs/community/python-flask/PKGBUILD /var/abs/community/tesseract/PKGBUILD /var/abs/community/protobuf/PKGBUILD /var/abs/community/lua-alt-getopt/PKGBUILD /var/abs/community/python-urllib3/PKGBUILD /var/abs/community/python-mysql-connector/PKGBUILD /var/abs/community/jack2/PKGBUILD /var/abs/community/python-biopython/PKGBUILD /var/abs/community/python-jsonschema/PKGBUILD /var/abs/community/python-jsonpointer/PKGBUILD /var/abs/community/python-pbr/PKGBUILD /var/abs/community/bird/PKGBUILD /var/abs/community/xe-guest-utilities/PKGBUILD /var/abs/community/python-httplib2/PKGBUILD /var/abs/community/rxvt-unicode/PKGBUILD /var/abs/community/qstardict/PKGBUILD /var/abs/community/notmuch/PKGBUILD /var/abs/community/python-sh/PKGBUILD /var/abs/community/python-jsonpatch/PKGBUILD /var/abs/community/scala/PKGBUILD /var/abs/community-testing/rxvt-unicode/PKGBUILD /var/abs/extra/hyphen/PKGBUILD /var/abs/extra/pangomm/PKGBUILD /var/abs/extra/hspell/PKGBUILD /var/abs/extra/postfix/PKGBUILD /var/abs/extra/python-virtualenv/PKGBUILD /var/abs/extra/glibmm/PKGBUILD /var/abs/extra/bluez/PKGBUILD /var/abs/extra/oxygen-icons/PKGBUILD /var/abs/extra/lapack/PKGBUILD /var/abs/extra/qemu/PKGBUILD /var/abs/extra/elementary/PKGBUILD /var/abs/extra/efl/PKGBUILD /var/abs/extra/pidgin/PKGBUILD /var/abs/extra/redland/PKGBUILD /var/abs/extra/xsane/PKGBUILD /var/abs/extra/python-pip/PKGBUILD /var/abs/extra/gnome-desktop-sharp/PKGBUILD /var/abs/extra/opencv/PKGBUILD /var/abs/extra/vim/PKGBUILD /var/abs/extra/digikam/PKGBUILD /var/abs/extra/ocaml/PKGBUILD

1 0