- Arch-general - lists.archlinux.org

[arch-general] systemd 215 + filesystem 2014.07-1 => problems booting?
by Genes Lists 05 Jul '14

05 Jul '14

Anyone else having trouble booting with testing repo and systemd 215 + filesystem 2014.07-1 as per thie forum post? https://bbs.archlinux.org/viewtopic.php?id=183796

3 3

[arch-general] systemd 214, journal problem
by Stefan Tatschner 04 Jul '14

04 Jul '14

Hi, today I have run pacman -Syu on my arch server. Systemd was updated from 213 to 214 and now I don't get any new journal entries. I just get the messages from the boot process and that's all. Any ideas? Stefan

9 22

[arch-general] Trust This Computer?
by Hunter Jozwiak 01 Jul '14

01 Jul '14

Hi all. I've got an iPod touch fifth generation, iOS 7.1, and I am trying to mount it to my Arch Linux box so I can get all the music off it. However, when I connect the cable, I get an alert from the iPod asking if I trust the computer. I tell it trust, and the computer, running Gnome, says the iPod is locked by a passcode, which is not true. I did install libimobiledevice and gvfs and that didn't help. Any help or pointing in the right direction is very much appreciated.

9 12

[arch-general] syslog-ng not listen on udp or tcp
by Stefan Fuhrmann 01 Jul '14

01 Jul '14

Hello all, I want to do a syslogserver but dont get it running to listen on udp or tcp. Here you can see my tries: #source src { # system(); # internal(); #source s_src { unix-dgram("/dev/log"); internal(); # file("/proc/kmsg" program_override("kernel")); # udp(); #udp (ip(x.x.x.x) port(514)); #source src { unix-stream("/dev/log"); internal(); udp(ip(0.0.0.0) port(514)); }; #}; #source s_network { syslog(ip(x.x.x.x) transport("udp")); }; source s_network { syslog(ip(x.x.x.x) transport("tcp")); }; destination clientslogs { file("/var/log/pfsense/$YEAR$MONTH$DAY/$HOST.log"); }; after restarting syslog and have a look with netstat -an | grep :514 nothing is shown What Im doing wrong? Can someone help? tia Stefan

1 1

[arch-general] samba4 provision error
by shadrock uhuru 01 Jul '14

01 Jul '14

Hi everyone archlinux Release: 2014.06.01 using the information on https://wiki.archlinux.org/index.php/Samba_4_Active_Directory_Domain_Contro… to install my Active Directory Domain Controller :- samba-tool domain provision --use-rfc2307 --interactive --use-xattrs=yes Realm [LOCALDOMAIN]: sat.co.uk Domain [sat]: Server Role (dc, member, standalone) [dc]: DNS backend (SAMBA_INTERNAL, BIND9_FLATFILE, BIND9_DLZ, NONE) [SAMBA_INTERNAL]: DNS forwarder IP address (write 'none' to disable forwarding) [10.4.1.2]: Administrator password: Retype password: which gives me the following error output :- ERROR(<class 'samba.provision.ProvisioningError'>): Provision failed - ProvisioningError: Your filesystem or build does not support posix ACLs, which s3fs requires. Try the mounting the filesystem with the 'acl' option. File "/usr/lib/python2.7/site-packages/samba/netcmd/domain.py", line 398, in run use_rfc2307=use_rfc2307, skip_sysvolacl=False) File "/usr/lib/python2.7/site-packages/samba/provision/__init__.py", line 2052, in provision raise ProvisioningError("Your filesystem or build does not support posix ACLs, which s3fs requires. Try the mounting the filesystem with the 'acl' option."). this my fstab file. cat /etc/fstab # /dev/sda1 UUID=6d501e92-b7be-4885-b6ce-4facd647623e / ext4 rw,relatime,data=ordered,user_xattr,acl,barrier=1 0 1 # /dev/sda2 UUID=fa951f67-d09c-412e-8d8a-07020863e3f0 /home ext4 rw,relatime,data=ordered,user_xattr,acl,barrier=1 0 2 and this is the test i did to confirm my acl was working. tune2fs -l /dev/sda1 | grep "Default mount options:" Default mount options: user_xattr acl tune2fs -l /dev/sda2 | grep "Default mount options:" Default mount options: user_xattr acl ------- can anyone provide me with an solution to my problem. thanks shadrock

1 0

[arch-general] linux 3.15.1-1 and blank screen on boot
by Eduardo Machado 29 Jun '14

29 Jun '14

After the last kernel update, when the mahine is booting, i see some info on scrren, but when the frame buffer starts it became blank. But the system finish to boot, the monitor is on, and i can blindly log in. After i downgraded the kernel package everything worked fine again. Anyone with something like this? It is a bug or something? best regeards, --- Eduardo M. Machado

5 6

Re: [arch-general] [arch-dev-public] nfs-utils-1.3.0 enters [testing]
by Genes Lists 29 Jun '14

29 Jun '14

On 06/18/2014 09:17 AM, Tobias Powalowski wrote: After running this update - my nfs server won't run at all - I get this error: systemctl status nfs-server ● nfs-server.service - NFS server and services Loaded: loaded (/usr/lib/systemd/system/nfs-server.service; enabled) Active: failed (Result: exit-code) since Fri 2014-06-20 16:07:08 EDT; 5s ago Process: 872 ExecStart=/usr/sbin/rpc.nfsd $RPCNFSDARGS (code=exited, status=1/FAILURE) Process: 868 ExecStartPre=/usr/sbin/exportfs -r (code=exited, status=0/SUCCESS) Main PID: 872 (code=exited, status=1/FAILURE) ..rpc.nfsd[872]: rpc.nfsd: writing fd to kernel failed: errno 11(...ed) ..rpc.nfsd[872]: rpc.nfsd: unable to set any sockets for nfsd ..fs-server.service: main process exited, code=exited,...URE ..Failed to start NFS server and services. Help? I tried to downgrade nfs-utils but that did not put things back in a good state.

3 9

[arch-general] gnome videos 3.12
by Eduardo Machado 29 Jun '14

29 Jun '14

Hi, after the last upgrade of gnome (including it's video software), this video app has no menu. When i click on the configurations button it does not show the menu for the configurations. Anyone with the same problem or now how to work around? thanks, --- Eduardo M. Machado.

6 7

[arch-general] Docked Lenovo T540p Not Recognizing Dual Monitors
by Jude Lucien 28 Jun '14

28 Jun '14

I unfortunately have a Lenovo T540p laptop and an UltraDock docking station. Plugged into the docking station is a Lenovo monitor via DVI and an Ilyama monitor via VGA. The monitors are not recognised by xrandr as being separate monitors, and the output mirrors each other. The output of xrandr -q: $ xrandr -q Screen 0: minimum 8 x 8, current 4560 x 1620, maximum 32767 x 32767 eDP1 connected 2880x1620+1680+0 (normal left inverted right x axis y axis) 344mm x 193mm 2880x1620 59.96*+ 50.00 2048x1536 60.00 1920x1440 60.00 1856x1392 60.01 1792x1344 60.01 1600x1200 60.00 1400x1050 59.98 1280x1024 60.02 1280x960 60.00 1024x768 60.00 800x600 60.32 56.25 640x480 59.94 VGA1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP2 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 255mm x 255mm 1680x1050 60.00*+ 1024x768 60.00 800x600 60.32 56.25 848x480 60.00 640x480 59.94 HDMI2 disconnected (normal left inverted right x axis y axis) VIRTUAL1 disconnected (normal left inverted right x axis y axis) eDP1 is my laptop monitor and DP2 is the Lenovo monitor. Notice the maximum screen size at the top of the output. I notice that I have more screen than I can use - how to set that to actual size as well? But the burning question is how can I get my VGA monitor to be recognised?

3 2

[arch-general] Chrooting to tmpfs in init
by Mark Lee 26 Jun '14

26 Jun '14

Salutations, I've been wondering if it's possible to chroot to a tmpfs instead of a partition in init. I'd like to decompress a 7zip root archive into a tmpfs and use that as root. This is different from using aufs2. Any suggestions as how I would go about doing this? Regards, Mark

1 0