- Arch-general - lists.archlinux.org

[arch-general] Phillips SAA7231
by Peter G Nikolic 24 Jan '12

24 Jan '12

Hi folks . Does anyone know the state of play with the SAA 7231 chipset i have a Compro S800F tv card dual terrestial and satelite but it has this darn philips chip is there any progress does anyone know Cheers Pete -- Powered by Kernel: 3.2.1-2-ARCH KDE Development Platform: 4.7.4 (4.7.4) 19:27:57 up 11 min, 4 users, load average: 0.86, 0.65, 0.41

2 2

[arch-general] Some help with systemd needed
by G. Schlisio 24 Jan '12

24 Jan '12

Hello folks, i'm playing around with systemd atm and everything works fine except of the sound output. systemctl shows no alsa or pulseaudio running and in the wiki entry i cant find any hint but 'systemctl enable alsa-*', but both options (by tabbing: alsa-restore, alsa-store) return Warning: unit files do not carry install information. No operation executed. anybody got a hint? help appreciated georg

3 6

[arch-general] netcfg inconsistency
by Norbert Zeh 23 Jan '12

23 Jan '12

Hi folks, I'm using netcfg heavily on my laptop, both for the wireless and wired adapters. Particularly, I use the net-auto-wirelss and net-auto-wired scripts to enable auto-configuration of these adapters. The net-auto-wireless script of the most recent netcfg package sources /etc/conf.d/netcfg. Thus, there is no need to clutter /etc/rc.conf with netcfg configuration. The net-auto-wired script on the other hand does not source /etc/conf.d/netcfg and thus fails unless WIRED_INTERFACE="..." is specified in rc.conf. It's certainly a matter of taste whether these configuration settings should live in /etc/rc.conf or /etc/conf.d/netcfg, but I think both scripts should be consistent. If the difference in how they treat /etc/conf.d/netcfg is intentional, I'd like to know the reason. Cheers, Norbert

1 0

[arch-general] Google earth plus one
by Peter G Nikolic 22 Jan '12

22 Jan '12

Hi all .. Does anyone know of the whereabouts of a copy of google earth to install on Arch or have i got to faf about with the rpm version there is a link on the Wiki but it is dead , Thats that one Now How does one go about convincing Kmail to store the passwords in it's configuration file (as it used to do) instead of forcing me to use something i hate with venom that darn Kwallet thing i have it disabled i would like it to stay that way for eternity Pete . -- Powered by Kernel: 3.2.1-1-ARCH KDE Development Platform: 4.7.4 (4.7.4) 18:07:14 up 3:59, 5 users, load average: 0.01, 0.08, 0.12

2 1

[arch-general] [Information] Outdated rtirq scripts don't work with current kernel-rt
by Ralf Madorf 22 Jan '12

22 Jan '12

Hi :) just an information, since rtirq doesn't fit to the current kernel. Even https://aur.archlinux.org/packages.php?ID=25441 is outdated. I got it from the archaudio repos. This cause that settings aren't working. Here a RME card seems to be loaded as the highest priority audio card, but the status shows that it isn't [1]. Using the current version everything is ok [2]. When Rui edit rtirq, than he does this for good reasons. Usually outdated rtirq scripts don't work. I'll try to build a package using abs tomorrow. Cheers! Ralf ########## [1] [root@archlinux spinymouse]# uname -r 3.0-rt [root@archlinux spinymouse]# /etc/rc.d/rtirq status PID CLS RTPRIO NI PRI %CPU STAT COMMAND 60 FF 90 - 130 0.0 S irq/8-rtc0 363 FF 80 - 120 0.0 S irq/21-ICE1712 360 FF 79 - 119 0.0 S irq/20-ICE1712 352 FF 76 - 116 0.0 S irq/18-hdspm [snip] [root@archlinux spinymouse]# /etc/rc.d/rtirq stop [root@archlinux spinymouse]# /etc/rc.d/rtirq force-reload Setting IRQ priorities: start [rtc] irq=8 pid=60 prio=90: OK. Setting IRQ priorities: start [hdspm] irq=18 pid=352 prio=85: OK. Setting IRQ priorities: start [TerraTec EWX24/96] irq=21 pid=363 prio=80: OK. Setting IRQ priorities: start [TerraTec EWX24/96] irq=20 pid=360 prio=79: OK. [snip] [root@archlinux spinymouse]# /etc/rc.d/rtirq start Setting IRQ priorities: start [rtc] irq=8 pid=60 prio=90: OK. Setting IRQ priorities: start [hdspm] irq=18 pid=352 prio=85: OK. Setting IRQ priorities: start [TerraTec EWX24/96] irq=21 pid=363 prio=80: OK. Setting IRQ priorities: start [TerraTec EWX24/96] irq=20 pid=360 prio=79: OK. [root@archlinux spinymouse]# /etc/rc.d/rtirq status PID CLS RTPRIO NI PRI %CPU STAT COMMAND 60 FF 90 - 130 0.0 S irq/8-rtc0 363 FF 80 - 120 0.0 S irq/21-ICE1712 360 FF 79 - 119 0.0 S irq/20-ICE1712 352 FF 76 - 116 0.0 S irq/18-hdspm [snip] [root@archlinux spinymouse]# pacman -Qi rtirq Name : rtirq Version : 20090920-1 URL : http://alsa.opensrc.org/Rtirq Licenses : GPL Groups : None Provides : None Depends On : util-linux-ng bash Optional Deps : None Required By : None Conflicts With : None Replaces : None Installed Size : 28.00 KiB Packager : hm_b <hb(a)uiae.de> Architecture : x86_64 Build Date : Sat 05 Jun 2010 02:08:23 PM CEST Install Date : Fri 20 Jan 2012 07:07:29 PM CET Install Reason : Explicitly installed Install Script : Yes Description : Realtime IRQ thread system tunning [root@archlinux spinymouse]# grep RTIRQ_NAME_LIST /etc/conf.d/rtirq RTIRQ_NAME_LIST="rtc hdspm snd usb i8042" [root@archlinux spinymouse]# grep DAEMONS= /etc/rc.conf DAEMONS=(69switch_xorg.conf hwclock syslog-ng !network !netfs crond acpid dbus rtirq) ########## [2] [root@archlinux spinymouse]# wget http://www.rncbc.org/jack/rtirq-20111007.tar.gz [snip] [root@archlinux spinymouse]# tar xzf rtirq-20111007.tar.gz [root@archlinux spinymouse]# cd rtirq-20111007 [root@archlinux rtirq-20111007]# ls LICENSE rtirq.conf rtirq.sh rtirq.spec [root@archlinux rtirq-20111007]# mv /etc/conf.d/rtirq /etc/conf.d/rtirq.package [root@archlinux rtirq-20111007]# mv /etc/rc.d/rtirq /etc/rc.d/rtirq.package [root@archlinux rtirq-20111007]# mv rtirq.sh /etc/rc.d/rtirq [root@archlinux rtirq-20111007]# mv rtirq.conf /etc/conf.d/rtirq [root@archlinux rtirq-20111007]# leafpad /etc/conf.d/rtirq [root@archlinux rtirq-20111007]# grep RTIRQ_NAME_LIST /etc/conf.d/rtirq RTIRQ_NAME_LIST="rtc hdspm snd usb i8042" [root@archlinux rtirq-20111007]# ln -s /etc/conf.d/rtirq /etc/rtirq.conf [root@archlinux rtirq-20111007]# /etc/rc.d/rtirq stop [root@archlinux rtirq-20111007]# /etc/rc.d/rtirq force-reload Setting IRQ priorities: start [rtc] irq=8 pid=60 prio=90: OK. Setting IRQ priorities: start [hdspm] irq=18 pid=352 prio=85: OK. Setting IRQ priorities: start [ICE1712] irq=21 pid=363 prio=80: OK. Setting IRQ priorities: start [ICE1712] irq=20 pid=360 prio=80: OK. [snip] [root@archlinux rtirq-20111007]# /etc/rc.d/rtirq start Setting IRQ priorities: start [rtc] irq=8 pid=60 prio=90: OK. Setting IRQ priorities: start [hdspm] irq=18 pid=352 prio=85: OK. Setting IRQ priorities: start [ICE1712] irq=21 pid=363 prio=80: OK. Setting IRQ priorities: start [ICE1712] irq=20 pid=360 prio=80: OK. [snip] [root@archlinux rtirq-20111007]# /etc/rc.d/rtirq status PID CLS RTPRIO NI PRI %CPU STAT COMMAND 60 FF 90 - 130 0.0 S irq/8-rtc0 352 FF 85 - 125 0.0 S irq/18-hdspm 360 FF 80 - 120 0.0 S irq/20-ICE1712 363 FF 80 - 120 0.0 S irq/21-ICE1712 [snip]

2 2

[arch-general] Kmod testing
by Myra Nelson 21 Jan '12

21 Jan '12

Fisrt Kmod experience, which spit out a lot of udevd messages, logged in, startx, openbox starts, then one locked up box. I was going to Ctrl Alt F2, log in, and do some work with udevadm but I had no keyboard of mouse control. I turned the box off then on to reboot, pacman -Rdd kmod pacman -S module-init-tools then reboot. I've examined the boot log from the previous run and here is a sample. Fri Jan 6 01:03:19 2012: udevd[310]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXCPU:': No such file or directory Fri Jan 6 01:03:19 2012: Fri Jan 6 01:03:19 2012: udevd[393]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C04:': No such file or directory Fri Jan 6 01:03:19 2012: Fri Jan 6 01:03:19 2012: udevd[334]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C02:': No such file or directory Fri Jan 6 01:03:19 2012: Fri Jan 6 01:03:19 2012: udevd[324]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0401:': No such file or directory I went back and read the messages from Dave and Dan to see if I'd missed anything and hadn't. After the install of Kmod, before I rebooted, I read the help message from kmod --help and there were commands listed for compatibilty mod with modprobe. I've already been triggering the udev rules after I boot to find my audio card but that wont work for this behavior because triggering the rules will simply look for /sbin/modprobe again. The kernel update came in at the same time, so the initrd images were rebuilt prior to rebooting. For know I've put kmod in my ignore packages line in pacman.conf. Do the udevd rules need to be written to point to kmod with it's compatibility mode or is there another solution? Thanks for any assistance. Myra -- Life's fun when your sick and psychotic!

3 4

[arch-general] Intel AES-NI instructions error
by Don Juan 21 Jan '12

21 Jan '12

I just noticed today after a fresh reboot that whenever my laptop connects now wirelessly, I get a new message in dmesg saying: Intel AES-NI instructions are not detected. Figuring was a bad boot or something along those lines I tried a couple more reboots, to no avail. It is still mentioning this once I connect to wifi, does not show up if I just leave the machine running not wirelessly connected. From what I read online nothing seems to be relating to wifi, most things I have read is to attach quiet to the boot commands and that would solve it, well I already have quiet and it does not show up during boot its only once the wifi card is used. I could not find anything that appeared to be similar or related. Does anyone know why this error is now showing up? Everything is updated right before I rebooted the last time, the only things that changed today for me were gnutils and another x-keyboard config update. Should I be worried about this or? Thanks for any help and info

3 5

[arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)
by Nils 20 Jan '12

20 Jan '12

Hello list! I hope this is not offtopic and I hope to find help here because Archlinux has python3 as default python. I have a software, a Music Notation Editor, here that can start in a one-liner and I need to find a bug that only occurs on some systems. git clone git://github.com/nilsgey/Laborejo.git && cd Laborejo && ./laborejo-qt.sh This will download and run my software Laborejo as normal user without installing anything. The only modifications to your system are new dir .laborejo in your home directory and the downloaded files via git. The only dependency is pyqt and git to download it You will see 5 lines and a symbol. The symbol must be perfectly alingned within the five lines (one pixel above can be tolerated). It should look like this: http://www.wargsang.de/pyqt-bug-report.jpg Do you see that symbol shifted up or down or is it correct? Could you please answer me with the following information attached: Your graphic driver (type ("ati, nvidia, intel" etc. and closed or open source?) and desktop enviroment/window manager (Gnome, KDE, xfce, i3 etc.). If you want to add more information like qt version or X-Server it would be nice as well. Everything display related helps: I believe closed nvidia drivers will shift the symbol. I tested it myself on ati and intel graphics, both 32 and 64 bit and it looked good, both on Linux and Windows. Other users with ati and intel GPU's had no problem. But two persons with an nvidia card had the wrong display. It would be very nice to hear from you! Nils http://www.laborejo.org *The only modifications to your system are new dir .laborejo in your home directory and the downloaded files via git.

11 15

Re: [arch-general] Help needed to find a system/graphics related bug in my Music Notation Editor. (Little time and effort for you)
by Nils 20 Jan '12

20 Jan '12

No. Everything is fine. I just removed the auto-insert of that item because the issue is fixed. You already pulled the fixed version were the user is free (again) to enter whatever he wants :) Nils On Fri, 20 Jan 2012 22:25:54 +0100 Michi <michi(a)nicce.at> wrote: > On 20.01.2012 01:08, Nils wrote: > > Thank you very very much for that information! > > This problem is the last piece before I can do my first (alpha) release. > > With xrandr --fbmm I could reproduce the error on the first try so I can do further tests myself now. > > > > And it really is a font issue. The lines in the display are correct but my fonts are not, not even the menu fonts. > > > > I will contact the PyQt or Qt community now to find out how to fix that. > > One already contacted me and notified me of a commandline parameter "-graphicssystem raster" which I have not tried yet. But the person also told me that this is a only workaround. > > > > I am excited to finally find a solution for this longstanding problem. > > > > Nils > > > > Hey! > > That looks absolutly wrong, > please look yourself: > > http://i.imgur.com/5bDXg.png > > > Is there maybe a dependency missing? > > > > #python -V > Python 3.2.2 > > #pacman -Qs pyqt > local/pyqt 4.9-2 > > #uname -a > Linux vodka 3.2.1-1-ARCH #1 SMP PREEMPT Fri Jan 13 06:50:31 CET 2012 > x86_64 Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz GenuineIntel GNU/Linux > > ATI Technologies Inc M96 [Mobility Radeon HD 4650] > ati-dri 7.11.2-1 > xorg-server 1.11.3-1 > xfce4 4.8 > > > #git clone git://github.com/nilsgey/Laborejo.git && cd Laborejo && > ./laborejo-qt.sh > Cloning into 'Laborejo'... > remote: Counting objects: 1867, done. > remote: Compressing objects: 100% (438/438), done. > remote: Total 1867 (delta 1453), reused 1835 (delta 1421) > Receiving objects: 100% (1867/1867), 1.66 MiB | 657 KiB/s, done. > Resolving deltas: 100% (1453/1453), done. > warning: libpysmf not found. Midi export and Playback broken. > warning: Jack Server not running. Starting without JACK. > *screenshot* > > > > > Michi >

1 0

[arch-general] FS#28008 - Bypass screensaver/locker program on xorg 1.11 and up
by Dmitry Korzhevin 20 Jan '12

20 Jan '12

a funny bug in the Xorg server that could allow attackers with physical access to a machine to bypass the screensaver/screen locker program. Most people use those programs to lock their computer when they are away. On Gnome, gnome-screensaver is responsible for this. On KDE, kscreenlocker is. There is a wide variety of smaller tools doing the same thing, e.g. slock, slimlock, i3lock... Read more: http://gu1.aeroxteam.fr/2012/01/19/bypass-screensaver-locker-program-xorg-1… ctrl+atl+*(on num lock keyboard) confirmed and work in arch linux. -- Best regards, Dmitry Korzhevin Tel: +38 (039) 295-0000 Office Phone: +38 (044) 383-14-12 E-mail: dkorzhevin(a)lsupport.net Jabber ID: dkorzhevin(a)lsupport.net Skype: dkorzhevin URL: http://lsupport.net Linux Support LLC

11 24