- Arch-general - lists.archlinux.org

[arch-general] Linux 5.18.8 - VirtualBox dkms - /usr/bin/dkms: line 1033: sha512: command not found
by David C. Rankin 05 Jul '22

05 Jul '22

This was rather strange on VirtualBox module rebuild, I received: ==> dkms install --no-depmod vboxhost/6.1.34_non_OSE -k 5.15.51-1-lts /usr/bin/dkms: line 1033: sha512: command not found /usr/bin/dkms: line 1033: sha512: command not found /usr/bin/dkms: line 1033: sha512: command not found ==> dkms install --no-depmod vboxhost/6.1.34_non_OSE -k 5.18.8-arch1-1 /usr/bin/dkms: line 1033: sha512: command not found /usr/bin/dkms: line 1033: sha512: command not found /usr/bin/dkms: line 1033: sha512: command not found Looks just like: https://bbs.archlinux.org/viewtopic.php?id=277700 Some type regression? What about the symlink discussed in the bbs topic? Necessary? -- David C. Rankin, J.D.,P.E.

4 4

[arch-general] Installing aur/perl-event fails: Unable to find a built tarball
by Jeanette C. 01 Jul '22

01 Jul '22

Hey hey, this is a strange error. I tried installing perl-event, an AUR package with trizen: trizen -Sy perl-event The package downloads, comiles and tests, as far as I can see and finally fails with: :: Unable to find a built tarball for perl-event (below is the full output of the command) Does anyone have an idea how to fix this? Is this an issue that might occasionally arise? Best wishes and tahnks, Jeanette *** Output of trizen -Sy perl-event :: Pacman command: /usr/bin/sudo /usr/bin/pacman -Sy :: Synchronising package databases... core downloading... extra downloading... community downloading... multilib downloading... realtime downloading... :: Pulling AUR changes: perl-event -------------------------------------------------------------------------------- :: Content of /tmp/trizen-jeanette/perl-event/PKGBUILD -------------------------------------------------------------------------------- # Maintainer: Brian Bidulock <bidulock(a)Openss7.org> # Contributor: John D Jones III <jnbek1972 -_AT_- g m a i l -_Dot_- com> # Generator : CPANPLUS::Dist::Arch 1.29 pkgname=perl-event pkgver=1.28 pkgrel=1.1 pkgdesc="Event loop processing" arch=('i686' 'x86_64') license=('PerlArtistic' 'GPL') options=('!emptydirs') makedepends=() url='http://search.mcpan.org/dist/Event' source=("http://search.mcpan.org/CPAN/authors/id/E/ET/ETJ/Event-${pkgver}.tar.gz") sha512sums=('8c7e676c3f659f85ae53ff3b60142943c72881f101f2c66dfd1a7e47babfade0171b78a2062476b6e061f12370b279b73abbe3ab01b07d7088145fa9508e7d0c') _distdir="Event-${pkgver}" build() { ( export PERL_MM_USE_DEFAULT=1 PERL5LIB="" \ PERL_AUTOINSTALL=--skipdeps \ PERL_MM_OPT="INSTALLDIRS=vendor DESTDIR='$pkgdir'" \ PERL_MB_OPT="--installdirs vendor --destdir '$pkgdir'" \ MODULEBUILDRC=/dev/null cd "$srcdir/$_distdir" /usr/bin/perl Makefile.PL make ) } check() { cd "$srcdir/$_distdir" ( export PERL_MM_USE_DEFAULT=1 PERL5LIB="" make test ) } _perl_depends() { # template start; name=perl-binary-module-dependency; version=1; if [[ $(find "$pkgdir/usr/lib/perl5/" -name "*.so") ]]; then _perlver_min=$(perl -e '$v = $^V->{version}; print $v->[0].".".($v->[1]);') _perlver_max=$(perl -e '$v = $^V->{version}; print $v->[0].".".($v->[1]+1);') depends+=("perl>=$_perlver_min" "perl<$_perlver_max") fi # template end; } package() { cd "$srcdir/$_distdir" make install find "$pkgdir" $ -name .packlist -o -name perllocal.pod $ -delete _perl_depends } # Local Variables: # mode: shell-script # sh-basic-offset: 2 # End: # vim:set ts=2 sw=2 et: Repository : AUR Name : perl-event Version : 1.28-1.1 Maintainer : bidulock URL : http://search.mcpan.org/dist/Event AUR URL : https://aur.archlinux.org/packages/perl-event License : PerlArtistic GPL Votes : 7 Popularity : 0% Installed : No Out Of Date : No Depends On : None Make Deps : None Check Deps : None Optional Deps : None Provides : None Conflicts With : None Replaces : None Package Base : perl-event Last Update : Thu Jun 2 03:58:45 2022 Description : Event loop processing ==> Making package: perl-event 1.28-1.1 (Fri 01 Jul 2022 22:50:05 CEST) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Found Event-1.28.tar.gz ==> Validating source files with sha512sums... Event-1.28.tar.gz ... Passed ==> Extracting sources... -> Extracting Event-1.28.tar.gz with bsdtar ==> Starting build()... Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Event Writing MYMETA.yml and MYMETA.json cp lib/Event/generic.pod blib/lib/Event/generic.pod cp lib/Event/Watcher.pm blib/lib/Event/Watcher.pm cp lib/Event/type.pm blib/lib/Event/type.pm cp lib/Event/io.pm blib/lib/Event/io.pm cp lib/Event/MakeMaker.pm blib/lib/Event/MakeMaker.pm cp lib/Event/idle.pm blib/lib/Event/idle.pm cp lib/Event/typemap blib/lib/Event/typemap cp lib/Event/signal.pm blib/lib/Event/signal.pm cp lib/Event/timer.pm blib/lib/Event/timer.pm cp lib/Event.pm blib/lib/Event.pm cp lib/Event/EventAPI.h blib/lib/Event/EventAPI.h cp lib/Event.pod blib/lib/Event.pod cp lib/Event/group.pm blib/lib/Event/group.pm cp lib/Event/generic.pm blib/lib/Event/generic.pm cp lib/Event/var.pm blib/lib/Event/var.pm Running Mkbootstrap for Event () chmod 644 "Event.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 "/usr/bin/perl" "/usr/share/perl5/core_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/core_perl/ExtUtils/typemap' -typemap '/tmp/trizen-jeanette/perl-event/src/Event-1.28/lib/Event/typemap' Event.xs > Event.xsc mv Event.xsc Event.c cc -c -Ic -Ilib/Event -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -flto -DVERSION=\"1.28\" -DXS_VERSION=\"1.28\" -fPIC "-I/usr/lib/perl5/5.36/core_perl/CORE" Event.c In file included from Event.xs:269: c/var.c: In function 'pe_var_start': c/var.c:82:20: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 82 | mg->mg_virtual = &PL_vtbl_uvar; | ^ rm -f blib/arch/auto/Event/Event.so cc -shared -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -flto -L/usr/local/lib -fstack-protector-strong Event.o -o blib/arch/auto/Event/Event.so \ \ chmod 755 blib/arch/auto/Event/Event.so Manifying 3 pod documents ==> Starting check()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/attach_to.t ..... ok t/bored.t ......... ok t/callback.t ...... ok t/data.t .......... ok t/delete.t ........ ok t/eval.t .......... ok t/fifo.t .......... ok t/generic.t ....... ok t/group.t ......... ok t/hook.t .......... ok t/hup.t ........... ok t/idle.t .......... ok t/Inline.t ........ ok t/io.t ............ ok t/leak.t .......... ok t/leak2.t ......... ok t/loop.t .......... ok t/now.t ........... ok t/reenter.t ....... ok t/signal.t ........ ok t/timeout_cb.t .... ok t/timer.t ......... ok t/unconfigured.t .. ok t/var.t ........... ok All tests successful. Files=24, Tests=124, 11 wallclock secs ( 0.05 usr 0.03 sys + 2.34 cusr 0.66 csys = 3.08 CPU) Result: PASS ==> Entering fakeroot environment... ==> Starting package()... "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Event.bs blib/arch/auto/Event/Event.bs 644 Manifying 3 pod documents Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/auto/Event/Event.so Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pod Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/var.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/group.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/EventAPI.h Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/timer.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/signal.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/typemap Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/idle.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/MakeMaker.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/io.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/type.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/Watcher.pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/vendor_perl/Event/generic.pod Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event::generic.3pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event::MakeMaker.3pm Installing /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/share/man/man3/Event.3pm Appending installation info to /tmp/trizen-jeanette/perl-event/pkg/perl-event/usr/lib/perl5/5.36/core_perl/perllocal.pod ==> Tidying install... -> Removing empty directories... -> Removing libtool files... -> Purging unwanted files... -> Removing static library files... -> Stripping unneeded symbols from binaries and libraries... -> Compressing man and info pages... ==> Checking for packaging issues... ==> Creating package "perl-event"... -> Generating .PKGINFO file... -> Generating .BUILDINFO file... -> Generating .MTREE file... -> Compressing package... ==> Leaving fakeroot environment. ==> Finished making: perl-event 1.28-1.1 (Fri 01 Jul 2022 22:50:21 CEST) ==> Cleaning up... :: Unable to find a built tarball for perl-event *** End of trizen -Sy perl-event -- * Website: http://juliencoder.de - for summer is a state of sound * Youtube: https://www.youtube.com/channel/UCMS4rfGrTwz8W7jhC1Jnv7g * Audiobombs: https://www.audiobombs.com/users/jeanette_c * GitHub: https://github.com/jeanette-c Here I go, on my own now <3 (Britney Spears)

3 3

[arch-general] openssl 3 -- status?
by Genes Lists 01 Jul '22

01 Jul '22

Be terrific if someone could provide an update on where things stand for arch migration to Openssl 3? We're coming up on the 1 year anniversary of openssl 3 with 3.0.4 released last week. As I recall there was some work happening to ensure things continue to work properly. My loose understanding is that openssl 3 has ABI changes but the API changes seem to be quite limited. The arch tracker site [1] shows 26 core packages as incomplete - though it's bit unclear from the site what the actual problems are. It also shows many many other packages similarly "incomplete" Fedora 36, which was released May 10 this year is, I believe, built against openssl 3. This at least strongly suggests that most "normal" packages work fine with rebuild of recent versions. We always have recent versions :) Taking a couple of examples from the tracker page [1]: 1) openssh shows the current version as incomplete. The openssh docs suggest openssl 3 support was made available in version 8.1p1 while it was still in dev. 2) cryptsetup - seems to be compatible as of 2.4.0. current version is 2.4.3). Only reference I found was redhat [2] 3) kmod - was unable to find any known issues. fedora 36 kmod is built against openssl 3 and it presumably is ok. 4) systemd - best I can tell there were some issues but they have been resolved (including license issues) 1 example is [3] Be great to get an update from those who, unlike me, really know :) thanks gene [1] https://archlinux.org/todo/openssl-30/ [2] https://bugzilla.redhat.com/show_bug.cgi?id=1975799 [3] https://github.com/systemd/systemd/issues/21666

3 4

[arch-general] packaging mingw-w64-gtksourceview5 and mingw-w64-libadwaita
by Sim Tov 26 Jun '22

26 Jun '22

Hello, I would like to help Gnome Text Editor developers to cross-compile it for Windows within their CI: https://gitlab.gnome.org/GNOME/gnome-text-editor/-/issues/149 This might help attract Windows users to Gnome/Linux... I was looking for a Linux distro that has a solid Mingw-w64 library collection to use as docker image in CI. Fedora doesn't have mingw-w64-gtk4 while Arch does, so I decided to use the latter. Dear Arch package maintainers, may I ask you to, please, package the most recent version of mingw-w64-gtksourceview5 and mingw-w64-libadwaita so I can go ahead? I saw this MSYS2 package (they use pacman) that might help you with compilation flags, etc.: https://packages.msys2.org/base/mingw-w64-gtksourceview5 https://packages.msys2.org/base/mingw-w64-libadwaita Thank you! ST

2 1

[arch-general] pacman Segfault on full system update
by David C. Rankin 25 Jun '22

25 Jun '22

I have an Arch guest in VirtualBox running on an Arch server. I installed virtualbox-bin 1-34-2 from AUR with 5.18 patch and the install on the host went fine. I access the guest headless using rdesktop over the LAN. (have done so for years). Doing a full system update from 5.17.7 to 5.18.6 (about 25 days of updates) on guest. Pacman segfaulted leaving post transaction hooks unrun. I reinstalled the kernel and systemd to force the initrd to be made so the guest is bootable. However, I'm not sure what additional hooks were missed. The guest window when X is started is 1440 x 864 but the only portion of the desktop shown is 1024 x 768 (rest is black and not shown, taskbar unable to be seen, etc.) After the pacman segfault, now the console is also missing the last 7-8 lines. I have to hit clear and start over at the top to see what I'm typing. How can I recover this system? I was able to rsync the last 1000 lines of pacman.log from the guest to the host, but the shared folders no longer work. The pacman.log summary of how the issue occurred is: [2022-06-24T02:06:26-0500] [PACMAN] Running 'pacman -Sy --needed archlinux-keyring' [2022-06-24T02:06:26-0500] [PACMAN] synchronizing package lists [2022-06-24T02:07:03-0500] [PACMAN] Running 'pacman -Su' [2022-06-24T02:07:03-0500] [PACMAN] starting full system upgrade [2022-06-24T02:07:30-0500] [ALPM] running '60-mkinitcpio-remove.hook'... [2022-06-24T02:07:30-0500] [ALPM] transaction started [2022-06-24T02:07:30-0500] [ALPM] upgraded iana-etc (20220427-1 -> 20220603-1) [2022-06-24T02:07:30-0500] [ALPM] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew [2022-06-24T02:07:31-0500] [ALPM] upgraded glibc (2.35-5 -> 2.35-6) [2022-06-24T02:07:31-0500] [ALPM-SCRIPTLET] Generating locales... [2022-06-24T02:07:32-0500] [ALPM-SCRIPTLET] en_US.UTF-8... done [2022-06-24T02:07:32-0500] [ALPM-SCRIPTLET] Generation complete. <snipped lots of packages installed> ... [2022-06-24T02:09:04-0500] [ALPM] upgraded linux-firmware-whence (20220509.b19cbdc-1 -> 20220610.7b71b75-1) Segfault Remove db.lock and continue: [2022-06-24T02:12:57-0500] [PACMAN] Running 'pacman -Syu' [2022-06-24T02:12:57-0500] [PACMAN] synchronizing package lists [2022-06-24T02:12:59-0500] [PACMAN] starting full system upgrade [2022-06-24T02:13:16-0500] [ALPM] transaction started [2022-06-24T02:13:17-0500] [ALPM] error: could not extract /usr/share/licenses/linux-firmware/LICENCE.nvidia (Zstd decompression failed: Restored data doesn't match checksum) [2022-06-24T02:13:17-0500] [ALPM] error: problem occurred while upgrading linux-firmware [2022-06-24T02:13:17-0500] [ALPM] upgraded linux-firmware (20220509.b19cbdc-1 -> 20220610.7b71b75-1) [2022-06-24T02:13:17-0500] [ALPM] transaction failed So I delete the firmware file from /var/cache/pacman/pkg and run the upgrade again. To my surprise, it doesn't download the firmware package again, it just considers it installed and proceeds to other packages, e.g. [2022-06-24T02:15:49-0500] [PACMAN] Running 'pacman -Syu' [2022-06-24T02:15:49-0500] [PACMAN] synchronizing package lists [2022-06-24T02:15:51-0500] [PACMAN] starting full system upgrade [2022-06-24T02:16:03-0500] [ALPM] transaction started [2022-06-24T02:16:03-0500] [ALPM] upgraded python (3.10.4-1 -> 3.10.5-1) [2022-06-24T02:16:09-0500] [ALPM] upgraded linux-headers (5.17.7.arch1-1 -> 5.18.6.arch1-1) [2022-06-24T02:16:11-0500] [ALPM] error: could not extract /usr/lib/mysql/plugin/client_ed25519.so (Zstd decompression failed: Restored data doesn't match checksum) [2022-06-24T02:16:11-0500] [ALPM] error: problem occurred while upgrading mariadb-libs [2022-06-24T02:16:11-0500] [ALPM] upgraded mariadb-libs (10.7.3-1 -> 10.8.3-1) [2022-06-24T02:16:11-0500] [ALPM] transaction failed Crash again and delete mariadb-libs from /var/cache... and try again: [2022-06-24T02:19:16-0500] [PACMAN] Running 'pacman -Syu' [2022-06-24T02:19:16-0500] [PACMAN] synchronizing package lists [2022-06-24T02:19:17-0500] [PACMAN] starting full system upgrade [2022-06-24T02:19:26-0500] [ALPM] transaction started [2022-06-24T02:19:26-0500] [ALPM] upgraded mariadb-clients (10.7.3-1 -> 10.8.3-1) [2022-06-24T02:19:27-0500] [ALPM] warning: directory permissions differ on /usr/lib/mysql/plugin/auth_pam_tool_dir/ filesystem: 700 package: 755 [2022-06-24T02:19:27-0500] [ALPM] upgraded mariadb (10.7.3-1 -> 10.8.3-1) [2022-06-24T02:19:27-0500] [ALPM-SCRIPTLET] :: MariaDB was updated to a new feature release. To update the data run: [2022-06-24T02:19:27-0500] [ALPM-SCRIPTLET] systemctl restart mariadb.service && mariadb-upgrade -u root -p [2022-06-24T02:19:27-0500] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew [2022-06-24T02:19:27-0500] [ALPM] upgraded pacman-mirrorlist (20220501-1 -> 20220605-1) <snip lots more packages installed> ... [2022-06-24T02:19:34-0500] [ALPM] upgraded tmux (3.2_a-1 -> 3.3_a-2) [2022-06-24T02:19:35-0500] [ALPM] error: could not extract /usr/share/doc/valgrind/valgrind_manual.ps (Zstd decompression failed: Restored data doesn't match checksum) [2022-06-24T02:19:35-0500] [ALPM] error: problem occurred while upgrading valgrind [2022-06-24T02:19:35-0500] [ALPM] upgraded valgrind (3.19.0-3 -> 3.19.0-4) [2022-06-24T02:19:35-0500] [ALPM] transaction failed Crash again. Rinse, repeat and try again: [2022-06-24T02:20:14-0500] [PACMAN] Running 'pacman -Syu' [2022-06-24T02:20:14-0500] [PACMAN] synchronizing package lists [2022-06-24T02:20:15-0500] [PACMAN] starting full system upgrade [2022-06-24T02:20:20-0500] [ALPM] transaction started [2022-06-24T02:20:21-0500] [ALPM] upgraded vim-runtime (8.2.4827-1 -> 8.2.5046-2) [2022-06-24T02:20:21-0500] [ALPM] upgraded vim (8.2.4827-1 -> 8.2.5046-2) [2022-06-24T02:20:21-0500] [ALPM] upgraded xbitmaps (1.1.2-2 -> 1.1.2-3) [2022-06-24T02:20:21-0500] [ALPM] upgraded xcb-util-cursor (0.1.3-3 -> 0.1.3-4) [2022-06-24T02:20:21-0500] [ALPM] upgraded xcursor-themes (1.0.6-2 -> 1.0.6-3) [2022-06-24T02:20:21-0500] [ALPM] upgraded xorg-bdftopcf (1.1-2 -> 1.1-3) [2022-06-24T02:20:21-0500] [ALPM] upgraded xorg-font-util (1.3.2-2 -> 1.3.2-3) [2022-06-24T02:20:21-0500] [ALPM] upgraded xorg-server-common (21.1.3-6 -> 21.1.3-7) [2022-06-24T02:20:21-0500] [ALPM] upgraded xorg-server (21.1.3-6 -> 21.1.3-7) [2022-06-24T02:20:21-0500] [ALPM] upgraded xorg-xcursorgen (1.0.7-2 -> 1.0.7-3) [2022-06-24T02:20:21-0500] [ALPM] upgraded xorg-xmessage (1.0.5-2 -> 1.0.5-3) [2022-06-24T02:20:21-0500] [ALPM] upgraded xorg-xmodmap (1.0.10-2 -> 1.0.10-3) [2022-06-24T02:20:21-0500] [ALPM] upgraded xorg-xsetroot (1.1.2-2 -> 1.1.2-3) [2022-06-24T02:20:21-0500] [ALPM] upgraded xterm (372-1 -> 372-2) [2022-06-24T02:20:21-0500] [ALPM] upgraded zsh (5.8.1-2 -> 5.9-1) [2022-06-24T02:20:24-0500] [ALPM] transaction completed [2022-06-24T02:20:24-0500] [ALPM] running '30-systemd-update.hook'... [2022-06-24T02:20:24-0500] [ALPM] running 'fontconfig.hook'... [2022-06-24T02:20:25-0500] [ALPM] running 'gtk-update-icon-cache.hook'... [2022-06-24T02:20:25-0500] [ALPM] running 'update-desktop-database.hook'... [2022-06-24T02:20:26-0500] [ALPM] running 'xorg-mkfontscale.hook'... Now system has many hooks not run, at this point if upgrade the kernel to force an image to be created and it succeeds: [2022-06-24T02:24:31-0500] [PACMAN] Running 'pacman -U /var/cache/pacman/pkg/linux-5.18.6.arch1-1-x86_64.pkg.tar.zst' [2022-06-24T02:24:37-0500] [ALPM] transaction started [2022-06-24T02:24:38-0500] [ALPM] reinstalled linux (5.18.6.arch1-1) [2022-06-24T02:24:40-0500] [ALPM] transaction completed [2022-06-24T02:24:41-0500] [ALPM] running '30-systemd-update.hook'... [2022-06-24T02:24:41-0500] [ALPM] running '60-depmod.hook'... [2022-06-24T02:24:46-0500] [ALPM] running '90-mkinitcpio-install.hook'... <snip -- succeeds without issue> [2022-06-24T02:25:05-0500] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-fall back.img [2022-06-24T02:25:06-0500] [ALPM-SCRIPTLET] ==> Image generation successful Reinstall systemd to force it to run its hooks and vim to see if I can't fix "can't allocate for color Orange", etc... [2022-06-24T02:46:41-0500] [PACMAN] Running 'pacman -S systemd systemd-libs vim vim-runtime' [2022-06-24T02:46:53-0500] [ALPM] transaction started [2022-06-24T02:46:53-0500] [ALPM] reinstalled systemd-libs (251.2-1) [2022-06-24T02:46:54-0500] [ALPM] reinstalled systemd (251.2-1) [2022-06-24T02:46:55-0500] [ALPM] reinstalled vim-runtime (8.2.5046-2) [2022-06-24T02:46:55-0500] [ALPM] reinstalled vim (8.2.5046-2) [2022-06-24T02:46:56-0500] [ALPM] transaction completed [2022-06-24T02:46:56-0500] [ALPM] running '20-systemd-sysusers.hook'... [2022-06-24T02:46:56-0500] [ALPM] running '30-systemd-catalog.hook'... [2022-06-24T02:46:56-0500] [ALPM] running '30-systemd-daemon-reload.hook'... [2022-06-24T02:46:56-0500] [ALPM] running '30-systemd-hwdb.hook'... [2022-06-24T02:46:57-0500] [ALPM] running '30-systemd-sysctl.hook'... [2022-06-24T02:46:57-0500] [ALPM] running '30-systemd-tmpfiles.hook'... [2022-06-24T02:46:57-0500] [ALPM] running '30-systemd-udev-reload.hook'... [2022-06-24T02:46:57-0500] [ALPM] running '30-systemd-update.hook'... [2022-06-24T02:46:57-0500] [ALPM] running '90-mkinitcpio-install.hook'... So after all of this manual running, I can start the VM and log in as user or root, but I'm not sure what got missed? Is there any way to know what hooks remain unrun or what packages the system thinks were installed but that were not actually installed? Why does X and the console only show 1024 x 768 of the guest even though the window (which is normally filled with the VM) is 1440 x 864? What do I need to look at/test to determine what shape my install is in? Sorry for the long post, but without the logs, it would have been impossible to explain what happened or where it happened in the upgrade process. Let me know if there is anything else I can post that will help. -- David C. Rankin, J.D.,P.E.

5 6

[arch-general] Popa3d and systemd
by paulf＠quillandmouse.com 14 Jun '22

14 Jun '22

Folks: I'm attempting to use popa3d to handle POP3 on my box for my home network. The authors assume you will be running an init.d system, but obviously, I'm running systemd. Does anyone know how to set this up with systemd so it will run without simply terminating. I've set up a system user called "popa3d" to satisfy a getpwnam() error generated by systemd, and I have a service file as follows: [Unit] Description=POP3 Daemon [Service] ExecStart=/usr/sbin/popa3d -D User=root [Install] WantedBy=multi-user.target Any help would be appreciated. Paul -- Paul M. Foster Personal Blog: http://noferblatz.com Company Site: http://quillandmouse.com Software Projects: https://gitlab.com/paulmfoster

3 2

[arch-general] Samba - Can fix for https://bugzilla.samba.org/show_bug.cgi?id=15062 be cherry picked too?
by David C. Rankin 11 Jun '22

11 Jun '22

Got the latest samba 4.16.1-4 and had part way expected the fix for: https://bugzilla.samba.org/show_bug.cgi?id=15062 To be included. I guess samba will wait for the next minor version number release to include it. However, I noticed the packager had cherry picked a gnome print fix and wondered if you could cherry pick the [homes] fix also. This bug prevents the normal [homes] share from appearing as a share making $HOME unavailable. -- David C. Rankin, J.D.,P.E.

1 0

[arch-general] konsole updated to handle the ANSI d & f escapes used by pacman current/total lines
by David C. Rankin 07 Jun '22

07 Jun '22

Just a follow up note, The konsole code was updated to handle the new line escapes that gave me issues when the new escapes were added to pacman. All displays fine, but it would still be nice to have a switch to turn the additional display off. I don't use the total info, just doesn't provide anything that meaningful to use while an update is being applied. Something like --nototal would do. -- David C. Rankin, J.D.,P.E.

2 1

[arch-general] konsole updated to handle the ANSI d & f escapes used by pacman current/total lines
by David C. Rankin 07 Jun '22

07 Jun '22

Just a follow up note, The konsole code was updated to handle the new line escapes that gave me issues when the new escapes were added to pacman. All displays fine, but it would still be nice to have a switch to turn the additional display off. I don't use the total info, just doesn't provide anything that meaningful to use while an update is being applied. Something like --nototal would do. -- David C. Rankin, J.D.,P.E.

1 0

[arch-general] About merge for revolt into revolt-desktop
by Óscar García Amor 28 May '22

28 May '22

Hi folks, A few days ago a request was made to merge revolt into revolt-desktop in AUR. At that time I already explained[1] that these were different packages and that the merger did not make sense. Three days ago Morten Linderud finally approved the merger of the packages despite the two being different. I have tried to contact him explaining why these packages should not be merged but I have not received a response. This is a copy of the email I sent him. --- BEGIN --- MAIL --- COPY --- Hi Morten, Recently you accept merge the package revolt into revolt-desktop: > Request #34104 has been Accepted by Foxboron [1]: > > [Autogenerated] Accepted merge for revolt into revolt-desktop. But these are completely different packages: Revolt[1] is an application written in Python (using PyGObject with GTK and WebKit) which wraps Element[2] in a fancy desktop environment integration. Revolt not is new, has been under development for several years and the first commit dates back to 2016[3]. revolt-desktop[4] (it's the first time I've heard of it, to be honest) is what appears to be a client of your own service revolt-chat[5]. It is something quite recent, its first commit dates back to 2021[6]. As you can see, we are really talking about two different applications that, although they are both instant messaging clients, have nothing to do with each other. On the other hand, in case of a name conflict, this would be caused by revolt-chat, being a much more recent application than revolt. Therefore I ask you to please consider this merger and revert the changes so that we can continue working with the revolt package in AUR. Thank you very much in advance. [1]: https://github.com/aperezdc/revolt [2]: https://element.io/ [3]: https://github.com/aperezdc/revolt/commit/455c7f25ae476be26cb1839368da68f58… [4]: https://github.com/revoltchat/desktop [5]: https://revolt.chat/ [6]: https://github.com/revoltchat/desktop/commit/309a8cea3307ed4707b26068d810c4… --- END --- MAIL --- COPY --- I understand that, as people working on Arch Linux there is a lot of work to be done, but that is no excuse, IMHO, for doing things wrong. Could the merger of these packages be reversed? Thanks for your time. [1]: https://lists.archlinux.org/pipermail/aur-requests/2022-April/070272.html -- Óscar García Amor | ogarcia at moire.org | http://ogarcia.me

2 2