- Arch-general - lists.archlinux.org

Re: [arch-general] Bashification of initscripts for moderate speedup
by aerospace1028＠hotmail.com 30 Jun '10

30 Jun '10

>Message: 9 >Date: Wed, 30 Jun 2010 18:48:37 +0200 >From: Philipp ?berbacher <hollunder(a)lavabit.com> >Subject: Re: [arch-general] Bashification of initscripts for moderate >speedup >To: arch-general <arch-general(a)archlinux.org> >Message-ID: <1277916464-sup-8123@eris> >Content-Type: text/plain; charset=UTF-8 > >Excerpts from Aaron Griffin's message of 2010-06-30 17:55:40 +0200: >> On Wed, Jun 30, 2010 at 10:00 AM, Caleb Cushing <xenoterracide(a)gmail.com> wrote: >> > On Tue, Jun 29, 2010 at 1:57 PM, Aaron Griffin <aaronmgriffin(a)gmail.com> wrote: >> >> I have no idea where the number came from, but both 80 and 132 are >> >> standard column widths used for normal and wide terminals. >> > >> > should be 78 columns I do believe that's the standard for kernel/git >> > it allows for email comments more easily apparently. >> >> No, physical terminals went to 80 columns. The 78 number was likely >> related to editor chrome, such as line numbering... I'm not sure of >> the details. >> >> I believe email typically has 78 width due to the fact that "> " is >> expected for replies. > >I also read about 72, and it's my current setting for vim when editing >mails, but I have no idea where that comes from... I'm not sure if this helps or not. When i learned the fortran 77 standard, it utilized columns 7-72, anything in column 1 signified a comment, col 2-5 were reserved for labels, col 6 marked a continuation line, and columns 73-80 had significance I can't recall. The strict layout had historical significance related to punch-cards, which I believe ran 80 columns wide. The f90 standard I believe expanded the usable codespace to 132 columns, but I'm not sure exactly how that number became astandard. I think the punch-card thing might be where the 80 column value comes from though. I'm just not sure which is the chicken and which the egg. _________________________________________________________________ The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail. http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28…

1 0

[arch-general] perl-xml-parser vs. perlxml: dependency probs
by Lou Garou 30 Jun '10

30 Jun '10

Is anybody else getting dependency errors involving the attempted replacement of perlxml by perl-xml-parser? I've got libxml-perl and perl-sml-dom both requiring perlxml, thus stopping the replacement. Should I just sit tight and let the backroom boyz fix it?

3 7

[arch-general] [signoff] cryptsetup 1.1.2-2
by Thomas Bächler 30 Jun '10

30 Jun '10

This version fixes the location of the pkgconfig file (shame on me to overlook that before). Please sign off.

1 0

[arch-general] html5 and flash was x86_64 flash debacle
by Caleb Cushing 30 Jun '10

30 Jun '10

sorry in order to speed up gmail I cleared all my mailing list archives so I can't reply to that thread now. http://apiblog.youtube.com/2010/06/flash-and-html5-tag.html youtube talks about what's missing from the <video> tag. I just thought maybe some people on here would be interested. I don't actually wish to continue the argument. -- Caleb Cushing http://xenoterracide.blogspot.com

1 0

[arch-general] Xorg 1.8, Nvidia 6200 Videoseven monitor
by Peter Cannon 30 Jun '10

30 Jun '10

Hi All I have a Videoseven 19" monitor L19FM and an Nvidia 6200 graphics card the monitor's capabilities are never recognised properly by any Linux distribution so usually I use the Nvidia-settings tool. I have upgraded to Xorg release 1.8 to do so I had to remove the Nvidia-173xx driver and installed xf86-video-nv. X bombs out with the xorg.conf file in place (/etc/X11) so I moved the xorg.conf file to xorg.conf.old and X will start but only in 800x600 This is my /var/log/xor.0.log http://www.pastebin.org/367717 I tried putting my original xorg.conf http://www.pastebin.org/367716 in /etc/X11/xorg.conf.d/ as 20-nvidia.conf obviously changing the devices sections to "nv" rather than "nvidia" I get an "Out of range" message on the monitor, black screen but I wouldn't say X has bombed as such. Usually this means the refresh is wrong however as the information in the file used to work under nvidia-173xx I cant see that its that. I have HAL and udev in the daemons array of rc.conf I also use GDM which again is in the list of daemons. Any help would be appreciated.

3 5

[arch-general] Xorg 1.8, Nvidia 6200 Videoseven monitor
by Peter Cannon 30 Jun '10

30 Jun '10

Hi All I have a Videoseven 19" monitor L19FM and an Nvidia 6200 graphics card the monitor's capabilities are never recognised properly by any Linux distribution so usually I use the Nvidia-settings tool. I have upgraded to Xorg release 1.8 to do so I had to remove the Nvidia-173xx driver and installed xf86-video-nv. X bombs out with the xorg.conf file in place (/etc/X11) so I moved the xorg.conf file to xorg.conf.old and X will start but only in 800x600 This is my /var/log/xor.0.log http://www.pastebin.org/367717 I tried putting my original xorg.conf http://www.pastebin.org/367716 in /etc/X11/xorg.conf.d/ as 20-nvidia.conf obviously changing the devices sections to "nv" rather than "nvidia" I get an "Out of range" message on the monitor, black screen but I wouldn't say X has bombed as such. Usually this means the refresh is wrong however as the information in the file used to work under nvidia-173xx I cant see that its that. I have HAL and udev in the daemons array of rc.conf I also use GDM which again is in the list of daemons. Any help would be appreciated.

1 0

[arch-general] Why no phonon in Qt
by Shridhar Daithankar 30 Jun '10

30 Jun '10

Hello, I have removed flash after the latest problem with x86_64 release and I want to get youtube working ASAP. To that end, I downloaded nightly sources of webkit(not wanting to download the entire svn checkout) and built the qt port. However the video element is still missing, as tested on http://html5test.com. Digging into webkit build system, I discovered that it has disabled video/audio element support for qt port because the installed qt does not support phonon. from http://repos.archlinux.org/wsvn/packages/qt/repos/extra-i686/PKGBUILD, phonon support is explicitly disabled during qt build. I searched around but could not find a reason for the same. I really do not want to build(more importantly maintain) my own qt build. So why is phonon support disabled in Qt? -- Regards Shridhar

7 11

[arch-general] makepkg creates symlink to the package file
by Attila 29 Jun '10

29 Jun '10

Hello together, since the new pacman a makepkg run creates a symlink to the package file in the directory of the PKGBUILD. Example: # ls -l *.gz opera-snapshot-10.60-6378.2ah-i686.pkg.tar.gz -> /server/work/archlinux/repo/opera-snapshot-10.60-6378.2ah-i686.pkg.tar.gz My differences to makepkg.conf.pacnew be this: MAKEFLAGS="-j2" CFLAGS="-march=i686 -mtune=generic -O2 -pipe -fomit-frame-pointer" CXXFLAGS="-march=i686 -mtune=generic -O2 -pipe -fomit-frame-pointer" BUILDENV=(fakeroot !distcc !color !ccache) OPTIONS=(strip !docs libtool emptydirs zipman purge) PKGDEST=/server/work/archlinux/repo PACKAGER="Attila <SysAdmin@hunnen>" PKGEXT='.pkg.tar.gz' [/server/work is a cifs mount point] Have i overseen something in the makepkg.conf to control this or does no one have this problem ... or is this a new feature which have to be so? See you, Attila

12 29

[arch-general] ffmpeg-23619-1-x86_64 corrupted?
by F. Gr. 29 Jun '10

29 Jun '10

Hi, I've been updating my ArchLinux system and have getting the following: " fgr@babili ~ % sudo reflector -l 6 -r -o /etc/pacman.d/mirrorlist && sudo clyde -Syyu -a :: Synchronizing package databases... core 35,4K 80,9K/s 00:00:00 [######################] 100% extra 452,9K 79,4K/s 00:00:06 [######################] 100% community 377,3K 81,8K/s 00:00:05 [######################] 100% :: Starting full system upgrade... :: Synchronizing AUR database... aur 33/ 33 [#########################################] 100% resolving dependencies... looking for inter-conflicts... Targets (1): ffmpeg-23619-1 Total Download Size: 0,00 MB Total Installed Size: 16,35 MB ==> Proceed with installation? [Y/n] y checking package integrity... :: File ffmpeg-23619-1-x86_64.pkg.tar.xz is corrupted. Do you want to delete it? [Y/n] " Is there any problem with it?

3 2

[arch-general] Finally found a solution to slow USB on HAL
by Nilesh Govindarajan 29 Jun '10

29 Jun '10

I have made a patch for /usr/share/hal/fdi/20-storage-methods.fdi to force async file transfer for vfat filesystems by commenting out flush and sync as valid options from the list. I checked the thing, now I'm getting the old high speed USB transfer. Do take a look at it, and comment. -- Regards, Nilesh Govindarajan Facebook: http://www.facebook.com/nilesh.gr Twitter: http://twitter.com/nileshgr Website: http://www.itech7.com Cheap and Reliable VPS Hosting: http://j.mp/arHk5e

7 10