- Arch-general - lists.archlinux.org

Re: [arch-general] Keyboad in KDE locks up
by Jan de Groot 04 Mar '09

04 Mar '09

On Wed, 2009-03-04 at 07:21 +0100, Dan Vratil wrote: > Hi, > this happens to me sometimes too. I found out, that I just have to > switch > to console, restart HAL daemon and it works again, so I'd say it could > be > problem in Xserver, but I'm really not sure about it. > > Dan Could be a problem with the evdev driver that freaks out on your keyboard. Restarting hal generates a load of new hotplug events for Xorg, so your keyboard gets removed from Xorg and hotplugged again, after which it is reinitialized. Is the keyboard you use PS2 or USB?

3 3

[arch-general] xf86-video-nouveau/nouveau-drm in testing
by Andreas Radke 03 Mar '09

03 Mar '09

I've added xf86-video-nouveau + nouveau-drm to testing. Together with Xorg 7.5 this is a nice replacement for the binary crap when you don't need 3D stuff. 2D works well accelerated. 3D will follow later with gallium 3d. For more read: http://nouveau.freedesktop.org/wiki/ I run a DualHead setup on my desktop. This is my full xorg.conf for example: # the right one Section "Monitor" Identifier "NEC" Option "PreferredMode" "1280x1024_60.00" EndSection # the left one Section "Monitor" Identifier "FUS" Option "PreferredMode" "1280x1024_60.00" Option "LeftOf" "NEC" EndSection Section "Device" Identifier "nvidia card" BoardName "nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)] rev 161" Driver "nouveau" Option "Monitor-DVI-I-0" "NEC" Option "Monitor-DVI-I-1" "FUS" EndSection Section "Screen" Identifier "screen1" DefaultDepth 24 SubSection "Display" Depth 24 Virtual 2560 1024 EndSubSection Device "nvidia card" EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" # will be replaced by gallium 3D Option "AIGLX" "false" EndSection Have fun getting rid off nvidia binary blobs. -Andy

1 0

Re: [arch-general] [arch-dev-public] mailman hiccup
by RedShift 03 Mar '09

03 Mar '09

Geoffroy Carrier wrote: > On Tue, Jan 20, 2009 at 09:10, RedShift <redshift(a)pandora.be> wrote: >> I've been working on my own mailing list manager, it's completely written in >> PHP and uses SQL as a backend, but at this point a bit specific to our >> setup. Because our company is all about open source I intend on releasing it >> as such. It's in need of an overhaul anyway, I'll get hacking at it again >> ASAP. > > I'd love to be an early adopter :) > > Plus I'd be happy to contribute... > > Ok so here's what I've got so far: When I was designing my anti-SPAM filter, I noticed you're just running a series of code after each other. To keep everything nice and tidy I split up the various routines into small pieces of code designed to do one thing and then pass on to the next filter. My project has the codename "redsky". Yes, it's cliché but I couldn't think of anything else. By itself, redsky is pretty useless. It's only capable of running a series of filters after each other. The real power is in the filters itself. The 3 filters that come shipped with redsky are designed to interface with another piece of software called proxsmtpd (but can be used in other ways as well, they just use STDIN and STDOUT), but there's no reasons you could write your own input/output filters and make redsky a mini-SMTP server. Here are the packages that are of interest: * phpemailtoolbox (http://aur.archlinux.org/packages.php?ID=22237) This is a small set of email related functions and classes. It is required by redsky. * redsky (http://aur.archlinux.org/packages.php?ID=22261) This is the main redsky code. It contains three filters: * redsky_read: this reads the email in question from STDIN. It is designed for interfacing with proxsmtpd, but can be used in a generic manner as well. * redsky_discard: when the discard flag is set on an email, this filter will log this event. * redsky_out: this outputs the email to STDOUT, again designed to interface with proxsmtpd but is suitable for general purpose as well. In the mailinglist * redsky-filters (http://aur.archlinux.org/packages.php?ID=24393) This is a set of complementary filters for redsky, it has for example SMTP blacklist checking, whitelisting, autoreplies, etc... They are mainly designed to use in a postfix content scanner context. Only the redsky_sqlconn filter is required for mailinglist manager. * mlm-filters (http://aur.archlinux.org/packages.php?ID=24399) This is the most interesting set of filters. Mlm stands for Mailing List Manager. There's a queueing part and a sending part. For the queueing part: * mlm_getinfo: Fetch information for a certain list using SQL * mlm_loopdetect: Check if a message is looping or not * mlm_bouncehandler: If the message received was sent to a bounce address, store it in an SQL table * mlm_getsubscribers: Get the subscribers from SQL for the current list * mlm_access: Determine if a sender has access to the list. It currently supports 4 methods: use an ACL, only allow subscribers, require a passphrase or no limitations * mlm_subjecttag: Tag the subject if the mailinglist is configured for that * mlm_addfooter: Add a footer to the emails if the mailinglist is configured for that * mlm_queuer: Write a spoolfile and put all the recipients into an SQL table For the sending part: * mlm_singleinstance: Only allow a single instance of redsky to be run * mlm_queuebuilder: Build a queue of messages to be sent and their respective recipients * mlm_queuerunner: Process the earlier built queue using sendmail to send messages redsky is written to support multiple configurations. In the MLM case, you would have two configuration files (examples are shipped with mlm-filters), one for the queuer and one for the sender. The queuer would be called by the MTA while to sender could be executing with a cronjob. Use -c to supply an alternate config, for example: redsky -c /etc/redsky.queuerunner.config.php You will notice that the redsky-filters and mlm-filters come shipped with example configuration files. You will find them in /usr/share/php/redsky/. Some filters depend on each other, so it is important in which order they are executed. For example, the mlm_access cannot determine if the sender is a subscriber when mlm_getsubscribers hasn't run first, because it uses the information from mlm_getsubscribers for this. Now maybe the hardest part, integration with an email server. I'll only handle postfix. Our entire infrastructure is based on MySQL, however all redsky code is written to use PDO, so it should be compatible with any databaseserver that PDO supports. You can get our database schema from http://projects.webmind.be/redsky/mail.sql In postfix terms, you would add entries to your alias table to send certain addresses to the "mlm". The examples below are made to work with the database schema above, but all queries can be modified in the configuration files. virtual_alias_maps = mysql:/etc/postfix/mysql/lists.cf lists.cf: user = USER password = PASSWORD hosts = HOST dbname = MAILDB query = SELECT 'mlm' AS goto FROM lists LEFT JOIN domains ON domains.domain_id = lists.domain_id WHERE (lists.list_post_address = '%u' OR lists.list_bounce_address = '%u') AND domains.domain_name = '%d' AND domains.domain_type = 'virtual' AND domains.domain_enable_email = 'yes' The above will send all mail sent to a mailing list address to 'mlm'. Now postfix knows it needs to send any list emails to mlm. Now we need to tell postfix that all email sent to the local 'mlm' address to be piped to our mlm program. For this we create a transport table, that has 'mlm(a)localhost.localdomain' transported to the 'mlm' destination. Now we have to define what the mlm destination is. Open up master.cf and add: mlm unix - n n - - pipe user=nobody flags=O argv=/usr/bin/redsky -c /etc/redsky.queuer.config.php Note the O flag, this will add an X-Original-To header, which is required to identify wich original address the message was sent to. To allow the messages to be distributed, just call /usr/bin/redsky -c /etc/redsky.runner.config.php Ok, all this information was probably hard to swallow. I will try to answer any questions you have regarding the implementation. If you want to ask me a direct question you can find me on IRC, freenode with the nick RedShift. I am in #archlinux. It's also easier if you start by testing it out directly from the shell instead of immediatly integrating it into your MTA. Best regards, Glenn

1 0

[arch-general] netcfg testing and git packages
by James Rayner 02 Mar '09

02 Mar '09

Hi The release beta cycle wasn't working well for netcfg. Small changes, bugs and many FR's got held up far too long while other work happened. To try and help get netcfg development going smoothly again I've uploaded some netcfg git PKGBUILDs to the AUR to use instead of -beta releases. This way I can make those small changes, push it to git, and it can be tested immediately, while larger things can be safely done in another branch locally. When it's ready, rc's will be released. http://aur.archlinux.org/packages.php?ID=23953 http://aur.archlinux.org/packages.php?ID=23954 There's some fairly substantial changes in this release. - Moving from net-tools to iproute - iproute is the way forward. net-tools is long unmaintained, nor as capable. - Moving from wireless_tools to pure wpa_supplicant - More reliable, less quirks required. Hopefully more stable. - As part of this, wireless moves into netcfg-wireless (dependency issues) Both of these require config changes. Once they're both stabilised I can release 2.2.x to give people time to migrate, and eventually 2.5 which will use them by default. There are example configs included. More details on the wiki: http://wiki.archlinux.org/index.php/Network_Profiles_development The wpa_supplicant move needs a significant amount of testing. I havn't tested WEP (testing hardware is gone), and net-auto may not work presently. WPA and custom WPA configs work in my testing. If there's any criticisms or comments about the way this is going, the code, netcfg, etc, please let me know. I'd like to make 2.2 a good release and I think these changes are important. I'm hoping they'll make netcfg simpler and more reliable. Cheers, James

4 3

[arch-general] icedtea6
by Juan Diego 02 Mar '09

02 Mar '09

Hello everyone Am I the only one who cannot execute any java applet from firefox since last openjdk update (openjdk6 1.4.1-1)? Thanks for your help Bye

4 7

Re: [arch-general] Scim and arphic fonts update in [testing]
by Smith Dhumbumroong 01 Mar '09

01 Mar '09

Thank you for taking your time and updating the scim packages, Eric. :) Any news on when it will hit 64bit? I'm currently using scim on my x86_64 Arch and would like to test the new packages out.

2 1

[arch-general] Problems with netcfg
by Cristopher Thomas 01 Mar '09

01 Mar '09

I decided to start using netcfg to manage my wireless connection instead of NetworkManager, but I can't seem to get it to connect reliably. There seems to be no pattern to when it will or won't connect, and I'm not having any connectivity problems in windows. Range isn't an issue either. I'm practically sitting right next to the router most of the time! If anyone can tell me what I'm doing wrong, I would greatly appreciate it. I'm using version 2.1.2 from the Core repository. Here's the error I get from netcfg: [~]$ sudo netcfg home :: home up [BUSY] wlan0: timed out - DHCP IP lease attempt failed [FAIL] Here's the profile I'm using: CONNECTION="wireless" DESCRIPTION="A simple WEP encrypted wireless connection" INTERFACE=wlan0 SCAN="yes" SECURITY="wap" ESSID="The Thomas' Net" KEY="xxxxxxxxxx" IP="dhcp" Output from lsmod: [~]$ lsmod Module Size Used by i915 67208 2 drm 108768 3 i915 fuse 59584 2 joydev 14208 0 pcmcia 39192 0 sdhci_pci 10624 0 sdhci 19588 1 sdhci_pci uvcvideo 62344 0 compat_ioctl32 11520 1 uvcvideo mmc_core 54624 1 sdhci psmouse 57116 0 videodev 37888 2 uvcvideo,compat_ioctl32 v4l1_compat 17284 2 uvcvideo,videodev snd_pcsp 13052 1 yenta_socket 28812 1 rsrc_nonstatic 13312 1 yenta_socket pcmcia_core 39204 3 pcmcia,yenta_socket,rsrc_nonstatic sg 31840 0 i2c_i801 12444 0 i2c_core 26144 1 i2c_i801 serio_raw 8196 0 iTCO_wdt 15184 0 iTCO_vendor_support 5636 1 iTCO_wdt video 22420 0 output 5248 1 video intel_agp 33136 1 acer_wmi 18664 0 wmi 8896 1 acer_wmi evdev 13984 6 thermal 20896 0 fan 7304 0 button 9504 0 battery 14600 0 ac 7176 0 usblp 16000 0 snd_seq_oss 35584 0 snd_seq_midi_event 9344 1 snd_seq_oss snd_seq 58336 4 snd_seq_oss,snd_seq_midi_event snd_seq_device 9364 2 snd_seq_oss,snd_seq snd_hda_intel 531252 2 snd_hwdep 10632 1 snd_hda_intel snd_pcm_oss 45440 0 snd_pcm 82952 3 snd_pcsp,snd_hda_intel,snd_pcm_oss snd_timer 24720 2 snd_seq,snd_pcm snd_page_alloc 11792 2 snd_hda_intel,snd_pcm snd_mixer_oss 18944 1 snd_pcm_oss snd 65096 16 snd_pcsp,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss soundcore 9632 1 snd tg3 133124 0 libphy 22656 1 tg3 arc4 4096 2 ecb 5248 2 ath9k 257968 0 mac80211 193840 1 ath9k cfg80211 45488 1 mac80211 rfkill 13776 4 acer_wmi,ath9k led_class 6280 2 acer_wmi,ath9k cpufreq_powersave 3840 0 cpufreq_ondemand 10512 0 acpi_cpufreq 10896 0 freq_table 6272 2 cpufreq_ondemand,acpi_cpufreq processor 46648 4 thermal,acpi_cpufreq rtc_cmos 14040 0 rtc_core 21060 1 rtc_cmos rtc_lib 4992 1 rtc_core ext3 141328 2 jbd 57000 1 ext3 mbcache 10244 1 ext3 sr_mod 18884 0 cdrom 39080 1 sr_mod sd_mod 29096 5 uhci_hcd 27552 0 ehci_hcd 41356 0 usbcore 160432 5 uvcvideo,usblp,uhci_hcd,ehci_hcd ahci 36876 4 libata 176224 1 ahci scsi_mod 119256 4 sg,sr_mod,sd_mod,libata iwconfig (when connected, obviously): [~]$ iwconfig lo no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"The Thomas' Net" Mode:Managed Frequency:2.437 GHz Access Point: 00:13:46:10:9B:74 Bit Rate=54 Mb/s Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Power Management:off Link Quality=100/100 Signal level:-71 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. And, I'm seeing this from dmesg: [~]$ dmesg | grep wlan0 wlan0: direct probe to AP ffff8800ba3a7aa0 try 1 wlan0 direct probe responded wlan0: authenticate with AP ffff8800ba3a7aa0 wlan0: authenticated wlan0: associate with AP ffff8800ba3a7aa0 wlan0: RX AssocResp from ffff8800ba5ba04a (capab=0x401 status=0 aid=5) wlan0: invalid aid value 5; bits 15:14 not set wlan0: associated wlan0: deauthenticating by local choice (reason=3) wlan0: direct probe to AP ffff8800ba3a7aa0 try 1 wlan0 direct probe responded wlan0: authenticate with AP ffff8800ba3a7aa0 wlan0: authenticated wlan0: associate with AP ffff8800ba3a7aa0 wlan0: RX AssocResp from ffff8800ba65c04a (capab=0x401 status=0 aid=5) wlan0: invalid aid value 5; bits 15:14 not set wlan0: associated wlan0: direct probe to AP ffff8800ba3a7aa0 try 1 wlan0 direct probe responded wlan0: authenticate with AP ffff8800ba3a7aa0 wlan0: authenticated wlan0: associate with AP ffff8800ba3a7aa0 wlan0: RX AssocResp from ffff8800ba76c04a (capab=0x401 status=0 aid=5) wlan0: invalid aid value 5; bits 15:14 not set wlan0: associated wlan0: direct probe to AP ffff8800ba3a7aa0 try 1 wlan0 direct probe responded wlan0: authenticate with AP ffff8800ba3a7aa0 wlan0: authenticated wlan0: associate with AP ffff8800ba3a7aa0 wlan0: RX AssocResp from ffff8800b9d6404a (capab=0x401 status=0 aid=5) wlan0: invalid aid value 5; bits 15:14 not set wlan0: associated wlan0: authenticate with AP ffff8800ba3a7aa0 wlan0: authenticated wlan0: associate with AP ffff8800ba3a7aa0 wlan0: RX AssocResp from ffff8800b9c3604a (capab=0x401 status=0 aid=5) wlan0: invalid aid value 5; bits 15:14 not set wlan0: associated -- ****BGCB***** GCC/O$ d--(+) s+:- a- C++ L++>+++ W++ K- w O? M V? PS- PE++ t 5 X R(+) tv+ b++ DI++ D G e+ h--- r+++ z+++ ****EGCB*****

8 13

[arch-general] Can't Disconnect With netcfg
by Thomas Bohn 27 Feb '09

27 Feb '09

Hi, I was finaly able to get netcfg working with most of the wifi networks you can ran into, mixed WPA/WPA2 networks are still an issue though. But I can't disconnect. "netcfg -d [network]" will fail and reconnecting fails too because netcfg think it is still connected to that network. This is esspecially an issue, if the AP is gone for a while. Reconnecting is impossible after the AP is back. Any ideas? Thomas

1 0

[arch-general] Problemas con x and intel 82815 chipset
by rapaz rico 27 Feb '09

27 Feb '09

Hello, my name is leandro and i'm having a problema with xorg server. I have a Compaq Deskpro EN and an intel 82815 chipset into it. I've been using the vesa driver but i can't set the resolution grater than 800x600 because x doesn't run and sais i haven't got enough memory. This chipset have 512K of not prefetchable and i'm sharing 64M to it. I can set the resolution to 1024x768 in win (the SO i get the computer with) so i don't think the memory is the problem. So, i'm traying to use the intel driver but i can't make it run. My xorg.conf is this Section "ServerLayout" Identifier "Xorg Configured" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "PS/2 Mouse" "CorePointer" # Serial Mouse not detected # USB Mouse not detected EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" Option "AutoAddDevices" "False" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/PEX" # Additional fonts: Locale, Gimp, TTF... FontPath "/usr/share/fonts/cyrillic" # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi" # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/ttf/western" FontPath "/usr/share/fonts/ttf/decoratives" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/truetype/openoffice" FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" FontPath "/usr/share/fonts/latex-ttf-fonts" FontPath "/usr/share/fonts/defoma/CID" FontPath "/usr/share/fonts/defoma/TrueType" EndSection Section "Module" Load "ddc" # ddc probing of monitor Load "dbe" #Load "dri" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "type1" Load "freetype" Load "record" # Load "synaptics" Disable "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc104" Option "XkbLayout" "es" Option "XkbVariant" "" EndSection Section "InputDevice" Identifier "Serial Mouse" Driver "mouse" Option "Protocol" "Microsoft" Option "Device" "/dev/ttyS0" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Section "InputDevice" Identifier "USB Mouse" Driver "mouse" Option "Device" "/dev/input/mice" Option "SendCoreEvents" "true" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection # Auto-generated by Archie mkxcfg Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors VertRefresh 50.0 - 54.0 # Very conservative. May flicker. # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default. # Default modes distilled from # "VESA and Industry Standards and Guide for Computer Display Monitor # Timing", version 1.0, revision 0.8, adopted September 17, 1998. # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $ # 640x350 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync # 640x400 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync # 720x400 @ 85Hz (VESA) hsync: 37.9kHz ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync # 640x480 @ 72Hz (VESA) hsync: 37.9kHz ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync # 640x480 @ 75Hz (VESA) hsync: 37.5kHz ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync # 640x480 @ 85Hz (VESA) hsync: 43.3kHz ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync # 800x600 @ 56Hz (VESA) hsync: 35.2kHz ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync # 800x600 @ 60Hz (VESA) hsync: 37.9kHz ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync # 800x600 @ 72Hz (VESA) hsync: 48.1kHz ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync # 800x600 @ 75Hz (VESA) hsync: 46.9kHz ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync # 800x600 @ 85Hz (VESA) hsync: 53.7kHz ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync # Additional modelines ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # Extended modelines with GTF timings # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync EndSection # Auto-generated by Archie mkxcfg Section "Device" Identifier "Card0" Driver "intel" VendorName "All" BoardName "All" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 16 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection #Section "DRI" # Mode 0666 #EndSection And my log file is this X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.27-ARCH i686 Current Operating System: Linux myhost 2.6.24-ARCH #1 SMP PREEMPT Sun Mar 30 11:40:06 CEST 2008 i686 Build Date: 17 December 2008 08:20:05PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 21:50:33 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Xorg Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "PS/2 Mouse" (**) Option "AllowMouseOpenFail" "true" (**) Option "AutoAddDevices" "False" (**) Not automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/PEX" does not exist. Entry deleted from font path. (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic". Entry deleted from font path. (Run 'mkfontdir' on "/usr/share/fonts/cyrillic"). (WW) The directory "/usr/share/fonts/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ttf/western" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/truetype" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/defoma/CID" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist. Entry deleted from font path. (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1. (**) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/misc, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/75dpi, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/100dpi, /usr/share/fonts/misc, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/TTF, /usr/share/fonts/Type1 (**) ModulePath set to "/usr/lib/xorg/modules" (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) No APM support in BIOS or kernel (II) Loader magic: 0x81d5fe0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 4.1 X.Org XInput driver : 2.1 X.Org Server Extension : 1.1 X.Org Font Renderer : 0.6 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0@0:2:0) Intel Corporation 82815 Chipset Graphics Controller (CGC) rev 2, Mem @ 0x44000000/0, 0x40300000/0 (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere. (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded even though the default is to disable it. (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 1.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 ABI class: X.Org Server Extension, version 1.1 (==) AIGLX enabled (==) Exporting typical set of GLX visuals (II) Loading extension GLX (II) LoadModule: "type1" (WW) Warning, couldn't open module type1 (II) UnloadModule: "type1" (EE) Failed to load module "type1" (module does not exist, 0) (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.5.3, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.6 (II) Loading font FreeType (II) LoadModule: "record" (WW) Warning, couldn't open module record (II) UnloadModule: "record" (EE) Failed to load module "record" (module does not exist, 0) (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.5.3, module version = 2.4.3 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 4.1 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.3.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.3.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile IntelÂ® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.5.3, module version = 0.1.0 ABI class: X.Org Video Driver, version 4.1 (**) intel(0): Depth 16, (--) framebuffer bpp 16 (==) intel(0): RGB weight 565 (==) intel(0): Default visual is TrueColor (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.2.1 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.1.0 ABI class: X.Org Video Driver, version 4.1 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.5.3, module version = 1.0.0 ABI class: X.Org Video Driver, version 4.1 (II) intel(0): initializing int10 (II) intel(0): Primary V_BIOS segment is: 0xc000 (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 3.0 (II) intel(0): VESA VBE Total Mem: 1024 kB (II) intel(0): VESA VBE OEM: Intel(R) 815 Chipset Video BIOS (II) intel(0): VESA VBE OEM Software Rev: 4.1 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: Intel(R) 815 Chipset (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) intel(0): VESA VBE DDC supported (II) intel(0): VESA VBE DDC Level 2 (II) intel(0): VESA VBE DDC transfer in appr. 1 sec. (II) intel(0): VESA VBE DDC read successfully (II) intel(0): Manufacturer: PBR Model: 304 Serial#: 305200627 (II) intel(0): Year: 2003 Week: 19 (II) intel(0): EDID Version: 1.1 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 22 (II) intel(0): Gamma: 1.27 (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) intel(0): redX: 0.618 redY: 0.349 greenX: 0.280 greenY: 0.605 (II) intel(0): blueX: 0.152 blueY: 0.063 whiteX: 0.281 whiteY: 0.310 (II) intel(0): Supported VESA Video Modes: (II) intel(0): 720x400@70Hz (II) intel(0): 640x480@60Hz (II) intel(0): 640x480@75Hz (II) intel(0): 800x600@60Hz (II) intel(0): 800x600@72Hz (II) intel(0): 1024x768@60Hz (II) intel(0): 1024x768@75Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported Future Video Modes: (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) intel(0): #2: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) intel(0): Supported additional Video Mode: (II) intel(0): clock: 40.5 MHz Image Size: 300 x 220 mm (II) intel(0): h_active: 640 h_sync: 656 h_sync_end 720 h_blank_end 800 h_border: 0 (II) intel(0): v_active: 480 v_sync: 481 v_sync_end 484 v_blanking: 506 v_border: 0 (II) intel(0): Supported additional Video Mode: (II) intel(0): clock: 56.2 MHz Image Size: 300 x 220 mm (II) intel(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0 (II) intel(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0 (II) intel(0): Ranges: V min: 50 V max: 150 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz (II) intel(0): 010003085 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff0040520403f3fd3012 (II) intel(0): 130d0101081e161be85c119e59479b27 (II) intel(0): 10484fa58a0081806159455900000000 (II) intel(0): 000000000000d20f80a020e01a101040 (II) intel(0): 13002cdc10000018f91520f830581f20 (II) intel(0): 204013002cdc1000001e000000fd0032 (II) intel(0): 961e460b000a202020202020000000fe (II) intel(0): 003031303030333038350a20202000c3 (II) intel(0): EDID vendor "PBR", prod id 772 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "640x480"x0.0 40.50 640 656 720 800 480 481 484 506 -hsync -vsync (50.6 kHz) (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz) (II) intel(0): Modeline "1024x768"x85.0 94.39 1024 1088 1200 1376 768 769 772 807 -hsync +vsync (68.6 kHz) (II) intel(0): Modeline "800x600"x85.0 56.55 800 840 928 1056 600 601 604 630 -hsync +vsync (53.5 kHz) (--) intel(0): Chipset: "i815" (--) intel(0): Linear framebuffer at 0x44000000 (--) intel(0): IO registers at addr 0x40300000 (II) intel(0): Kernel reported 37888 total, 1 used (II) intel(0): I810CheckAvailableMemory: 151548k available (==) intel(0): Will alloc AGP framebuffer: 16384 kByte (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (II) intel(0): Monitor0: Using hsync range of 28.00-96.00 kHz (II) intel(0): Monitor0: Using vrefresh range of 50.00-54.00 Hz (II) intel(0): Monitor0: Using maximum pixel clock of 110.00 MHz (II) intel(0): Clock range: 9.50 to 163.00 MHz (II) intel(0): Not using mode "640x350" (vrefresh out of range) (II) intel(0): Not using mode "640x400" (vrefresh out of range) (II) intel(0): Not using mode "720x400" (vrefresh out of range) (II) intel(0): Not using mode "640x480" (vrefresh out of range) (II) intel(0): Not using mode "640x480" (vrefresh out of range) (II) intel(0): Not using mode "640x480" (vrefresh out of range) (II) intel(0): Not using mode "640x480" (vrefresh out of range) (II) intel(0): Not using mode "800x600" (vrefresh out of range) (II) intel(0): Not using mode "800x600" (vrefresh out of range) (II) intel(0): Not using mode "800x600" (vrefresh out of range) (II) intel(0): Not using mode "800x600" (vrefresh out of range) (II) intel(0): Not using mode "800x600" (vrefresh out of range) (II) intel(0): Not using mode "1024x768" (unknown reason) (II) intel(0): Not using mode "1024x768" (vrefresh out of range) (II) intel(0): Not using mode "1024x768" (vrefresh out of range) (II) intel(0): Not using mode "1024x768" (vrefresh out of range) (II) intel(0): Not using mode "1024x768" (vrefresh out of range) (II) intel(0): Not using mode "1152x864" (vrefresh out of range) (II) intel(0): Not using mode "1280x960" (vrefresh out of range) (II) intel(0): Not using mode "1280x960" (vrefresh out of range) (II) intel(0): Not using mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1792x1344" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1792x1344" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1856x1392" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1856x1392" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1920x1440" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1920x1440" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1800x1440" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1800x1440" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "640x480" (vrefresh out of range) (II) intel(0): Not using mode "768x576" (vrefresh out of range) (II) intel(0): Not using mode "768x576" (vrefresh out of range) (II) intel(0): Not using mode "768x576" (vrefresh out of range) (II) intel(0): Not using mode "768x576" (vrefresh out of range) (II) intel(0): Not using mode "768x576" (vrefresh out of range) (II) intel(0): Not using mode "800x600" (vrefresh out of range) (II) intel(0): Not using mode "1024x768" (vrefresh out of range) (II) intel(0): Not using mode "1152x864" (vrefresh out of range) (II) intel(0): Not using mode "1152x864" (vrefresh out of range) (II) intel(0): Not using mode "1152x864" (vrefresh out of range) (II) intel(0): Not using mode "1280x960" (vrefresh out of range) (II) intel(0): Not using mode "1280x960" (vrefresh out of range) (II) intel(0): Not using mode "1280x960" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using mode "1400x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1400x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "832x624" (vrefresh out of range) (II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1360x768" (vrefresh out of range) (II) intel(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1360x768" (vrefresh out of range) (II) intel(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1440x900" (vrefresh out of range) (II) intel(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1024" (vrefresh out of range) (II) intel(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (vrefresh out of range) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1080" (vrefresh out of range) (II) intel(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1200" (vrefresh out of range) (II) intel(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) intel(0): Not using driver mode "640x480" (vrefresh out of range) (II) intel(0): Not using driver mode "800x600" (vrefresh out of range) (II) intel(0): Not using driver mode "800x600" (vrefresh out of range) (II) intel(0): Not using driver mode "640x480" (vrefresh out of range) (II) intel(0): Not using driver mode "640x480" (vrefresh out of range) (II) intel(0): Not using driver mode "720x400" (vrefresh out of range) (II) intel(0): Not using driver mode "1024x768" (vrefresh out of range) (II) intel(0): Not using driver mode "1024x768" (vrefresh out of range) (II) intel(0): Not using driver mode "800x600" (vrefresh out of range) (II) intel(0): Not using driver mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using driver mode "1024x768" (vrefresh out of range) (II) intel(0): Not using driver mode "800x600" (vrefresh out of range) (WW) intel(0): Mode pool is empty (EE) intel(0): No valid modes found (II) UnloadModule: "intel" (II) UnloadModule: "int10" (II) Unloading /usr/lib/xorg/modules//libint10.so (II) UnloadModule: "vbe" (II) Unloading /usr/lib/xorg/modules//libvbe.so (II) UnloadModule: "xaa" (II) Unloading /usr/lib/xorg/modules//libxaa.so (II) UnloadModule: "vgahw" (II) Unloading /usr/lib/xorg/modules//libvgahw.so (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found The dri module is disable because i've found that ir could be the problem (http://bugs.archlinux.org/task/7658) but it didn't resolve anything. I try the i810 driver and the log says it doesn't find the device. I don't know what else to do. Thanks for advice. PD: I'm sorry if my english wasn't good enough.

3 5

[arch-general] Wrong keyboard layout in GDM since upgrade
by Sébastien Mazy 26 Feb '09

26 Feb '09

Hi all, Since about a week and a recent upgrade which didn't involve gdm, GDM has been using the US qwerty, even though the default X.org layout is french, variant oss (and it's the layout used by other DMs like Slim, which I don't want to use because of gnome-keyring and other reasons). I've been using X.org input hotplug without glitches until now, with three keyboard layouts defined through HAL: fr, de, us. Not only chooses GDM the US layout as default, but it prevents me from changing it using the alt+shift toggle (which I configured in HAL and works in every application but GDM). How should I tell GDM to stop trying to be smart and use X.org primary layout instead? Does anyone know how GDM find/is provided the keyboard layout to use? Some configuration data follows. I start GDM in the runlevel 5 using /etc/inittab. /etc/X11/xorg.conf: (yes that's all) Section "Device" Identifier "Device0" Driver "nvidia" Option "NoLogo" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" EndSection /etc/hal/fdi/policy/information/10-keymap.fdi: <?xml version="1.0" encoding="ISO-8859-1"?>  <deviceinfo version="0.2"> <device> <match key="info.capabilities" contains="input.keyboard"> <merge key="input.xkb.layout" type="string">fr,de,us</merge> <merge key="input.xkb.variant" type="string">oss,,</merge> <merge key="input.xkb.options" type="string">grp:alt_shift_toggle</merge> </match> </device> </deviceinfo> Relevant (?) extract from /etc/rc.conf: KEYMAP="fr-latin9" Cheers, -- Sébastien Mazy

2 5