- Arch-general - lists.archlinux.org

[arch-general] mythtv
by Jameson 09 Jan '18

09 Jan '18

With the mythtv packages being dropped to the AUR, are there any remaining options for DVR software in the official repos? =-Jameson

5 6

[arch-general] AL gnustep-core implementation misses gnustep-back
by LoneVVolf 09 Jan '18

09 Jan '18

In the recent repo clean up operation gnustep-back was dropped to AUR. I have maintained the oolite package when it was still in AUR and remember plenty of problems with running oolite against faulty / incomplete gnustep-core implementations . The gnustep upstream website [1] lists gnustep-back as a required package for every gnustep install . The ANNOUNCE file in gnustep-back source code [2] states gnustep-gui & gnustep-back are 2 components of the display system used by gnustep . I feel that removing gnustep-back from gnustep-core group goes against arch linux policy of staying as close to upstream as possible. Lone_Wolf [1] http://wwwmain.gnustep.org/resources/downloads.php?site=ftp%3A%2F%2Fftp.gnu… [2] ftp://ftp.gnustep.org/pub/gnustep/core/gnustep-back-0.25.1.tar.gz

2 1

[arch-general] (no subject)
by Martin Guy 06 Jan '18

06 Jan '18

Greets! I maintain a vi clone, xvi.sf.net, which fails to build on arch linux. The issue follows: https://github.com/martinwguy/xvi/blob/master/issues/open/arch-linux-build-… A user reports build failure on Arch Linux when the final link fails to find symbols tgoto, BC and UP. This recalls a similar issue on AIX, where one had to link with -lcurses and see also the #ifdef AIX phrases in src/tcap_src.c The AIX box that needed this doesn't have a libtermcap, while I see you do have one. Do you know which termcap that is? GNU or BSD or something else? I also see it's in local/ - does that mean it's been installed locally and is a version different from the Arch repository? (Sorry, I'm not that familiar with Arch linux to understand these things!) http://github.com/martinwguy/xvi/issues/165 Package version: local/termcap 1.3.1-4 multilib/gcc-multilib 7.1.1-4 (multilib-devel) core/binutils 2.28.0-4 (base-devel) core/make 4.2.1-2 (base-devel) core/automake 1.15.1-1 (base-devel) ([0])$>> make (cd src && make -f makefile.pos \ OPTFLAG="-O2 -DHELPFILE=\\\"/usr/share/xvi/xvi.help\\\"" \ xvi) [...] cc -DUNIX -DTERMIOS -DPOSIX -O2 -DHELPFILE=\"/usr/share/xvi/xvi.help\" -o xvi alloc.o altstack.o ascii.o buffers.o cmdline.o cmdmode.o cmdtab.o cursor.o dispmode.o edit.o ex_cmds1.o ex_cmds2.o events.o fileio.o find.o flexbuf.o map.o mark.o misccmds.o mouse.o movement.o normal.o param.o pipe.o preserve.o ptrfunc.o regexp.o screen.o search.o signal.o startup.o status.o tag.o targets.o undo.o update.o version.o vi_cmds.o vi_ops.o virtscr.o windows.o yankput.o unix.o tcapmain.o tcap_scr.o -ltermcap tcap_scr.o: In function `set_scroll_region': tcap_scr.c:(.text+0x148): undefined reference to `tgoto' tcap_scr.o: In function `cm_absolute': tcap_scr.c:(.text+0x4e8): undefined reference to `tgoto' tcap_scr.c:(.text+0x524): undefined reference to `tgoto' tcap_scr.o: In function `scroll_up.part.5': tcap_scr.c:(.text+0x8b9): undefined reference to `tgoto' tcap_scr.o: In function `tty_open': tcap_scr.c:(.text+0xe80): undefined reference to `BC' tcap_scr.c:(.text+0xea6): undefined reference to `UP' tcap_scr.o: In function `scroll_down': tcap_scr.c:(.text+0x1948): undefined reference to `tgoto' collect2: error: ld returned 1 exit status make[1]: *** [makefile.pos:65: xvi] Error 1 I don't run AL; can anyone confirm the status of this issue? Many thanks Martin Guy

3 5

[arch-general] xorg-xdm changes $PATH and breaks gdbus-codegen
by Iru Cai 05 Jan '18

05 Jan '18

Hi, I'm trying to build gimp-git which launches gdbus-codegen while building. However, my $PATH is /bin:/usr/bin:/usr/bin:/usr/ucb:/usr/local/sbin:/usr/local/bin:..., and running gdbus-codegen will give the following error: Traceback (most recent call last): File "/bin/gdbus-codegen", line 41, in <module> from codegen import codegen_main ModuleNotFoundError: No module named 'codegen' After some searching from the packages I've installed, I found "/bin:/usr/bin:/usr/bin:/usr/ucb" in /usr/bin/xdm. I think it's xorg-xdm that changes $PATH. I suggest just using "PATH=/usr/local/sbin:/usr/local/bin:/usr/bin" in /etc/profile instead of using appendpath. Iru -- My website: https://vimacs.lcpu.club Please do not send me Microsoft Office/Apple iWork documents. Send OpenDocument instead! http://fsf.org/campaigns/opendocument/

2 1

[arch-general] dhcpd create lease error and unable to kinit for dynupdate on domain controller
by niya 03 Jan '18

03 Jan '18

hi everyone following https://wiki.archlinux.org/index.php/Samba/Active_Directory_domain_controll…, on my samba dc i have installed the dhcp package and the samba-dhcpd-updateAUR package there are two unresolved errors that i cannot fix 1 -: Can't create new lease file: Permission denied 2 -: kinit for dynamic DNS failed can anyone offer any suggestions. Jan 02 17:43:28 MYDC dhcpd[25603]: execute_statement argv[0] = /usr/bin/dhcpd-update-samba-dns.sh Jan 02 17:43:28 MYDC dhcpd[25603]: execute_statement argv[1] = add Jan 02 17:43:28 MYDC dhcpd[25603]: execute_statement argv[2] = 192.168.1.233 Jan 02 17:43:28 MYDC dhcpd[25603]: execute_statement argv[3] = salaam Jan 02 17:43:29 MYDC dhcpd[25603]: Can't create new lease file: Permission denied Jan 02 17:43:29 MYDC dhcpd[25603]: DHCPREQUEST for 192.168.1.233 from f0:7b:cb:0e:f6:02 via eth0 Jan 02 17:43:29 MYDC dhcpd[25603]: DHCPACK on 192.168.1.233 to f0:7b:cb:0e:f6:02 (salaam) via eth0 Jan 02 17:43:35 MYDC dhcpd[24067]: kinit for dynamic DNS failed let me know if i need to send more configuration details. shadrock

1 0

Re: [arch-general] [Solved] Switch from AMD GPU to nvidia GPU
by Foxtrot Mike 31 Dec '17

31 Dec '17

Hi, Thanks for the reply. So I re-installed the AMD graphics card. Updated the system with 'pacman -Syu'. Created a bootable arch USB. Shut the PC off and installed nvidia card. Booted up the system. Everything worked fine this time. Don't know what the issue was but perhaps updating the system resolved it. Regards On 12/30/2017 11:12 PM, Florijan Hamzic wrote: Hi, Afaik, you should at least be able to boot into the system, maybe you can try to but into a arch boot image and read the log files. If you have some more information you could check this guide: https://wiki.archlinux.org/index.php/NVIDIA/Troubleshooting Foxtrot Mike via arch-general <arch-general(a)archlinux.org<mailto:arch-general@archlinux.org>> schrieb am Sa., 30. Dez. 2017, 18:54: Hi all, I was using amd r7 260x card without any problem with 'amdgpu' module. Now I want to install my new nvidia card (1050ti). I assumed that installing 'nvidia' package from pacman would be enough to be able to use my new GPU. (Apparently not). The nvidia related packages installed on my PC are: ~$ pacman -Qs nvidia local/libvdpau 1.1.1+3+ga21bf7a-1 Nvidia VDPAU library local/nvidia 387.34-15 NVIDIA drivers for linux local/nvidia-utils 387.34-2 NVIDIA drivers utilities Upon rebooting after switching the cards, arch boots fine until "Reached target graphical interface" appears on the display. It seemed the PC was stuck, but switching to tty2 resulted in flashing keyboard lights. Which, according to a quick Google search, means kernel panic. Moreover, [1] says that "the files are read in ASCII order, and by convention their names start with XX- (two digits and a hyphen, so that for example 10 is read before 20).". But I have multiple files in "/usr/share/X11/xorg.conf.d" starting with the same number 10: ~$ ls /usr/share/X11/xorg.conf.d/ 10-amdgpu.conf 10-quirks.conf 10-nvidia-drm-outputclass.conf 40-libinput.conf Please help me in getting my new card up and running. Regards. [1] https://wiki.archlinux.org/index.php/xorg#Using_.conf_files

1 0

[arch-general] Switch from AMD GPU to nvidia GPU
by Foxtrot Mike 30 Dec '17

30 Dec '17

Hi all, I was using amd r7 260x card without any problem with 'amdgpu' module. Now I want to install my new nvidia card (1050ti). I assumed that installing 'nvidia' package from pacman would be enough to be able to use my new GPU. (Apparently not). The nvidia related packages installed on my PC are: ~$ pacman -Qs nvidia local/libvdpau 1.1.1+3+ga21bf7a-1 Nvidia VDPAU library local/nvidia 387.34-15 NVIDIA drivers for linux local/nvidia-utils 387.34-2 NVIDIA drivers utilities Upon rebooting after switching the cards, arch boots fine until "Reached target graphical interface" appears on the display. It seemed the PC was stuck, but switching to tty2 resulted in flashing keyboard lights. Which, according to a quick Google search, means kernel panic. Moreover, [1] says that "the files are read in ASCII order, and by convention their names start with XX- (two digits and a hyphen, so that for example 10 is read before 20).". But I have multiple files in "/usr/share/X11/xorg.conf.d" starting with the same number 10: ~$ ls /usr/share/X11/xorg.conf.d/ 10-amdgpu.conf 10-quirks.conf 10-nvidia-drm-outputclass.conf 40-libinput.conf Please help me in getting my new card up and running. Regards. [1] https://wiki.archlinux.org/index.php/xorg#Using_.conf_files

2 1

[arch-general] Setting make options for aur-packages
by Jeanette C. 28 Dec '17

28 Dec '17

Hey hey, is there a simple, systematic option to set make options for building AUR packages, that are compiled on the local system? I know that I can edit the PKGBUILD file for each package, but I'd prefer something global. My goal is to build using multiple jobs (-j option for make). I searched options and environment variables for aurget and makepkg, without result. TIA and best wishes, Jeanette -------- * website: http://juliencoder.de - for summer is a state of sound * SoundCloud: https://soundcloud.com/jeanette_c Just hang around and you'll see, There's nowhere I'd rather be <3 (Britney Spears)

5 6

[arch-general] [archlinux] shepherd in Arch
by Javier 26 Dec '17

26 Dec '17

Hi, Looking into [1] and [2], I noticed it's possible to get openRC working from AUR in Arch, but more importantly, seems like it's also possible to get shepherd working on Arch from AUR [1][3]. However, as opposed to openRC, shepherd seems less documented. Both shepherd and openRC appear as integrated inits for Arch... Any documentation on migration to shepherd from AUR? Please notice my intention is not to start a discussion about inits. I know systemd is the "de facto" init for Arch. I just would like to try shepherd on Arch. If possible using besides eudev, also elogind, which seem also available from AUR. And all this from AUR... Thanks, -- Javier [1] https://wiki.archlinux.org/index.php/Init [2] https://wiki.archlinux.org/index.php/OpenRC [3] https://aur.archlinux.org/packages/shepherd

2 2

[arch-general] Install Archlinux on HP Elitebook
by news＠contrepoison.ch 25 Dec '17

25 Dec '17

Hi everyone, I'm struggeling with my laptop : I can't manage to boot into any Linux distribution. My laptop is an HP Elitebook x360 G2 ; BIOS P80 01.09 Rev.A (up to date). By turning off every "protection" I'm able to select the USB stick in the boot menu ; but I can't pass this step. I immediately go back to the boot menu. Does anyone knows how to install Arch on one of thoose #@$&=%* machine ? Many thanks, Tom

14 23