- Arch-general - lists.archlinux.org

[arch-general] Depends on foo-bar=10.0-3
by Ralf Mardorf 15 Aug '17

15 Aug '17

Hi, why does a package from official repositories mentions what version of a dependency is required? Since the actually optional dependency pulseaudio by upstream often is required as a hard dependency, for no sane reason, I installed a dummy package years ago, to workaround time consuming workarounds. Today I tried to install something and part of the dependency chain of stuff I don't need is pulseaudio-bluetooth. It doesn't matter, I'm willing to install pulseaudio-bluetooth, instead of building another dummy package or rebuilding something. Why does the package pulseaudio-bluetooth dedicated mentions pulseaudio=10.0-3? Why not simply mentioning "pulseaudio" without the version? Note! I'm not asking anybody not to do it like this! I only want to know the reason for mentioning a version of a dependency, for packages from official repositories, since I don't know any reason. IOW I only want to learn. Regards, Ralf [rocketmouse@archlinux aur]$ pacman -Si pulseaudio-bluetooth Repository : extra Name : pulseaudio-bluetooth Version : 10.0-3 Description : Bluetooth support for PulseAudio Architecture : x86_64 URL : https://www.freedesktop.org/wiki/Software/PulseAudio/ Licenses : GPL Groups : None Provides : None Depends On : pulseaudio=10.0-3 bluez bluez-libs sbc Optional Deps : None Conflicts With : None Replaces : None Download Size : 50.91 KiB Installed Size : 173.00 KiB Packager : Jan de Groot <jgc(a)archlinux.org> Build Date : Sat 11 Mar 2017 11:21:44 PM CET Validated By : MD5 Sum SHA-256 Sum Signature [rocketmouse@archlinux aur]$ pacman -Qi pulseaudio Name : pulseaudio Version : 2013.08.18-1 Description : Dummy package Architecture : any URL : None Licenses : None Groups : None Provides : pulseaudio Depends On : None Optional Deps : None Required By : pulseaudio-alsa Optional For : firefox fluidsynth phonon-qt4 phonon-qt5 speech-dispatcher Conflicts With : dummy Replaces : None Installed Size : 4.00 KiB Packager : Unknown Packager Build Date : Sun 18 Aug 2013 06:06:40 PM CEST Install Date : Tue 25 Apr 2017 02:41:25 AM CEST Install Reason : Explicitly installed Install Script : No Validated By : None

8 16

[arch-general] Recent updates cause ssh sessions to disconnect/reauth repeatedly for ~20 seconds?
by David C. Rankin 13 Aug '17

13 Aug '17

All, After updates in the past day or two, I see new behavior for my idle ssh connections that authorize as normal, but then are systematically disconnected forcing a reauth at regular intervals of one-per second, for about 20 seconds. Aug 12 17:46:11 valhalla sshd[3095]: userauth_pubkey: key type ssh-dss not in PubkeyAcceptedKeyTypes [preauth] Aug 12 17:46:11 valhalla sshd[3095]: Accepted publickey for david from 192.168.6.104 port 50778 ssh2: ECDSA SHA256:foo Aug 12 17:46:11 valhalla sshd[3095]: pam_unix(sshd:session): session opened for user david by (uid=0) Aug 12 17:46:11 valhalla systemd-logind[466]: New session c15 of user david. Aug 12 17:46:11 valhalla systemd[1]: Started Session c15 of user david. Aug 12 17:46:11 valhalla sshd[3097]: Received disconnect from 192.168.6.104 port 50778:11: disconnected by user Aug 12 17:46:11 valhalla sshd[3097]: Disconnected from user david 192.168.6.104 port 50778 Aug 12 17:46:11 valhalla sshd[3095]: pam_unix(sshd:session): session closed for user david Aug 12 17:46:11 valhalla systemd-logind[466]: Removed session c15. ... Aug 12 17:46:11 valhalla systemd[1]: Started Session c16 of user david. Aug 12 17:46:11 valhalla sshd[3102]: Received disconnect from 192.168.6.104 port 50780:11: disconnected by user Aug 12 17:46:11 valhalla sshd[3102]: Disconnected from user david 192.168.6.104 port 50780 Aug 12 17:46:11 valhalla sshd[3100]: pam_unix(sshd:session): session closed for user david Aug 12 17:46:11 valhalla systemd-logind[466]: Removed session c16. ... Aug 12 17:46:12 valhalla systemd[1]: Started Session c17 of user david. Aug 12 17:46:12 valhalla sshd[3107]: Received disconnect from 192.168.6.104 port 50782:11: disconnected by user Aug 12 17:46:12 valhalla sshd[3107]: Disconnected from user david 192.168.6.104 port 50782 Aug 12 17:46:12 valhalla sshd[3105]: pam_unix(sshd:session): session closed for user david Aug 12 17:46:12 valhalla systemd-logind[466]: Removed session c17. It says "Received disconnect from 192.168.6.104 port 50778:11: disconnected by user", but that has never happened in the past. It also causes the connection port to jump +2 each iteration. Can anyone else confirm this as new behavior? At least it stops after about 20 iterations and seems to settle down. I have connections on a LAN that may be up for 3-4 days at a time. (If it were continually iterating/logging 9-lines per-second over that period, it would grow quickly.) -- David C. Rankin, J.D.,P.E.

2 2

[arch-general] Strange time sync problem.
by Matthew Dyer 12 Aug '17

12 Aug '17

Hi all, I have an arch machine with mate as the desktop. I am using orca all works well, but 1 problem that is driving me crazy is time zone syncrinization. If I get time with orca t, I here the time 4 hours ahead of my local time. For example, If I press orca t for time, it will tell me that it is 15:-01. It is speaking in 24 hour time rather than 12 hour. It is about 11 am eastering at time of writing this message. I am wondering if there is a way to fix this. I installed gnome control center and set it to sync timezone info and to use am-pm but the is not being used dispite the changed. How can I fix this? Thanks. I tried tz select, but not sure whare the file is to set globalble. hanks. Matthew

2 1

[arch-general] PS: xdpyinfo displays wrong "dimension" values
by Ralf Mardorf 11 Aug '17

11 Aug '17

On Thu, 10 Aug 2017 16:39:33 +0200, Ralf Mardorf wrote: >[rocketmouse@archlinux ~]$ xdpyinfo | grep "screen" -A2 # HDMI LCD on >and VGA CRT off >default screen number: 0 >number of screens: 1 > >screen #0: > dimensions: 1920x1080 pixels (506x285 millimeters) > resolution: 96x96 dots per inch ^^^^^ [rocketmouse@archlinux ~]$ xdpyinfo | grep "screen" -A2 # HDMI LCD on and VGA CRT off default screen number: 0 number of screens: 1 screen #0: dimensions: 1920x1080 pixels (502x282 millimeters) resolution: 97x97 dots per inch ^^^^^ Seemingly xdpyinfo is buggy, not only the millimeters are wrong, also the dpi value isn't always the same.

2 2

[arch-general] How to build nvidia driver?
by Manuel Reimer 11 Aug '17

11 Aug '17

Hello, I never did this before, but on one of my systems, I'm affected by: https://devtalk.nvidia.com/default/topic/1020399/ Can someone please give me some hints about what steps I have to do to downgrade the driver without touching the kernel version? Which packages need downgrading? Thanks in advance Manuel

4 6

[arch-general] xdpyinfo displays wrong "dimension" values
by Ralf Mardorf 10 Aug '17

10 Aug '17

Hi, I followed https://wiki.archlinux.org/index.php/Xorg#Display_size_and_DPI . I measured the screen size of the LCD and the CRT manually and in addition I calculated the screen size of the LCD. FWIW manual measuring provided the same result as the calculation. This is my xorg.conf [rocketmouse@archlinux ~]$ cat /etc/X11/xorg.conf Section "Monitor" Identifier "HDMI2" DisplaySize 526 296 Option "PreferredMode" "1920x1080" Option "Primary" "true" EndSection Section "Monitor" Identifier "VGA1" DisplaySize 367 278 Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 Option "PreferredMode" "1024x768" Option "RightOf" "HDMI2" EndSection Section "Device" Identifier "Card0" Driver "intel" #Driver "vesa" EndSection Section "ServerFlags" Option "BlankTime" "0" Option "StandbyTime" "0" Option "SuspendTime" "0" Option "OffTime" "0" EndSection For my session I added a few modes using xrandr: [rocketmouse@archlinux ~]$ xrandr Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767 HDMI1 disconnected primary (normal left inverted right x axis y axis) HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 530mm x 300mm 1920x1080 60.00*+ 50.00 59.94 1920x1080i 60.00 50.00 59.94 1680x1050 59.88 1600x900 60.00 1280x1024 60.02 1280x800 59.91 1280x720 60.00 50.00 59.94 1024x768 60.00 800x600 60.32 720x576 50.00 720x576i 50.00 720x480 60.00 59.94 720x480i 60.00 59.94 640x480 60.00 59.94 720x400 70.08 VGA1 connected (normal left inverted right x axis y axis) 1024x768 60.00 + 60.00 800x600 60.32 56.25 848x480 60.00 640x480 59.94 1152x864_90hz_xdh_default 90.00 1440x960_86hz_xdh_music-1 86.00 1368x768_90hz_xdh_music-2 90.00 1024x768_60hz_xdh_no-risk 60.00 VIRTUAL1 disconnected (normal left inverted right x axis y axis) [rocketmouse@archlinux ~]$ xdpyinfo | grep "screen" -A2 # HDMI LCD on and VGA CRT off default screen number: 0 number of screens: 1 screen #0: dimensions: 1920x1080 pixels (506x285 millimeters) resolution: 96x96 dots per inch [rocketmouse@archlinux ~]$ xdpyinfo | grep "screen" -A2 # HDMI LCD off and VGA CRT 1024x768 default screen number: 0 number of screens: 1 screen #0: dimensions: 1024x768 pixels (269x201 millimeters) resolution: 97x97 dots per inch [rocketmouse@archlinux ~]$ xdpyinfo | grep "screen" -A2 # HDMI LCD off and VGA CRT 1152x864 default screen number: 0 number of screens: 1 screen #0: dimensions: 1152x864 pixels (301x226 millimeters) resolution: 97x97 dots per inch Is this a bug or do I misunderstand something? Regards, Ralf

1 0

[arch-general] syslinux menu, dualhead issue
by Ralf Mardorf 10 Aug '17

10 Aug '17

Hi, yesterday I connected a LCD monitor LG 24MB56HQ-B by HDMI and a CRT monitor by VGA to my Computer with an Intel HD Graphics of a Celeron G1840. IIRC (it's just a day ago :D) if I turned on the computer both monitors showed the BIOS as well as the syslinux menu at the same time. However, important is what happens today. I dislike the LG 24MB56HQ-B, so I gave it back and bought an EIZO FlexScanEV2450. The EIZO LCD monitor as well as the CRT monitor are connected by the same cables. Both monitors still show the BIOS, but just the CRT shows the syslinux menu. The LCD monitor claims that there is no HDMI signal. If I turn of the CRT monitor it doesn't change. If I disconnect the VGA cable, then the LCD monitor turns on and shows the syslinux menu. There are no issues with lightdm or openbox, xorg.conf and xrandr allow all wanted configurations, IOW I can chose between the LCD, the CRT or use both monitors. In short, just the syslinux menu does use the wrong monitor. I want to use the LCD display only, just for some tasks I want to use the CRT monitor, too. However, disconnecting the CRT monitor and only connecting it on demand isn't an option. Is there a way to ensure that syslinux does use the monitor connected by HDMI? Regards, Ralf

1 0

[arch-general] makepkg - any way to recompile only newly patched files in large packages?
by David C. Rankin 08 Aug '17

08 Aug '17

All, There was a fix for a gtk2 bug I filed regarding the recentchooserdefault.c file. (it was a one-line fix where a variable needed reset to 0). Is there any way I can configure makepkg to behave as if the gcc -MP -MD options had been given to have it only recompile the one patched source without rebuilding the entire package -- again? I've been through the wiki and the man page, and other than --repackage, there doesn't seem to be anything that would work (or I'm just missing it). -- David C. Rankin, J.D.,P.E.

6 10

[arch-general] Why doesn't svntogit/{community, packages} describe cloning (or download) of individual packages?
by David C. Rankin 06 Aug '17

06 Aug '17

All, After abs demise, I ran into needed to rebuild gtk2 with --enable-debug=yes for a gtk.org bug report. Finding the packages from the normal package search is simple, but when you are on svntogit -- the only helpful discussions are to clone the entire repository, e.g.: Clone https://git.archlinux.org/svntogit/community.git git://git.archlinux.org/svntogit/community.git ssh://git.archlinux.org/srv/git/svntogit/community.git Nowhere are there options to download or clone the current repository (like github) and nowhere is there a mention of 'asp export pkgname'. There is no wiki for asp and the only mention is in the ABS page -- and that information relates to the svn part of the tree. 'asp export' works fine, but if there is nothing on the svntogit that directs folks to it, the only information given is to 'Clone' as shown above. (which will result in roughly 500M each for community and packages if the instructions on the page are followed (compared to what was 88M total for abs). Can individual clone or download urls be provided on each package page like with github? Can references to 'asp export' also be provided? Those seems like things that should be done to help with the transition away from abs and help preserve bandwidth. -- David C. Rankin, J.D.,P.E.

4 4

[arch-general] Got Dummy Output after recovered from Suspension
by Robert Wong 04 Aug '17

04 Aug '17

The model is Dell Inspiron 7560. The system got no sound after recovered from a suspension. After reboot, got Dummy Output. Have rebooted for several times, but useless. Re-enabled sound controller in firmware, not work. Reinstalled latest linux kernel as well as pulseaudio, not work. Ran the following commands listed below, got the following outputs: % dmesg | grep snd [ 3.220554] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 4.920606] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 7.964804] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 8.971491] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x000f0000 [ 9.978141] snd_hda_intel 0000:00:1f.3: Codec #0 probe error; disabling it... % cat /proc/asound/devices 2: [ 0] : control 3: [ 0- 3]: digital audio playback 4: [ 0- 7]: digital audio playback 5: [ 0- 8]: digital audio playback 6: [ 0- 9]: digital audio playback 7: [ 0-10]: digital audio playback 8: [ 0- 2]: hardware dependent 33: : timer % cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xd1228000 irq 282 Have no idea what is going on. Any help would be appreciated. Thanks. RW

1 0