- Arch-general - lists.archlinux.org

Plasma 6 packages / kde-unstable repo?
by Michael Bromilow 12 Jul '23

12 Jul '23

Hi, My apologies if this is not the right list to ask this, but are there any plans to build Plasma 6 packages for kde-unstable now that it's being shipped in unstable KDE Neon releases and the nightly/testing repos of a few other distros? On the same topic, is the kde-unstable repo still an official repo? It's listed in the Wiki, still shows up as a repository on archlinux.org/packages, and still syncs through Pacman, but it has no packages (I'm not sure for how long) and I noticed that it's also missing from the Gitlab instance containing packages for the other repositories. Kind regards, Michael

3 3

pacman - Grub note should use root prompt instead of user
by David C. Rankin 12 Jul '23

12 Jul '23

All, The pacman note on grub users the $ user-prompt designation instead of #, e.g. :: To use the new features provided in this GRUB update, it is recommended to install it to the MBR or UEFI. Due to potential configuration incompatibilities, it is advised to run both, installation and generation of configuration: $ grub-install ... $ grub-mkconfig -o /boot/grub/grub.cfg It's a "nit", but is there any reason it doesn't read: # grub-install ... # grub-mkconfig -o /boot/grub/grub.cfg Chuckling .. if this is the only thing to bring up in the last 6 months - Arch is doing really, really good! -- David C. Rankin, J.D.,P.E.

2 1

Arch Linux General Questions
by Source Code 12 Jul '23

12 Jul '23

Hello dear Arch Linux team! I would like to ask you a series of questions: 1. Is Arch Linux completely free? If I use Arch linux, create various programs on it, do anything in general, both commercial and non-commercial, do I have to pay anyone? 2. What does it mean that Arch Linux has proprietary software? Does this mean I have to pay someone something? 3. How do I know if I'm using a free program or a proprietary one? 4. Do I have to contribute to Arch Linux or is it optional? P.S. I really liked the idea of Arch Linux. So I would like to get to know her better :)

4 3

Re: Audio distortion after latest upgrades
by Luis O. 09 Jul '23

09 Jul '23

In-Reply-To: <750a8f2c-6a5f-ade3-6d81-4f109e840a4f(a)darose.net> Hi, I have this issue too, so I reported it on the kernel bugzilla. I think it affects systems with intel TGL socs/cpus and kernel 6.4+ https://bugzilla.kernel.org/show_bug.cgi?id=217647 Sent with Proton Mail secure email.

3 4

Re: Arch-general Digest, Vol 11, Issue 1
by Cédric Rouzeaud 07 Jul '23

07 Jul '23

Le ven. 7 juil. 2023 à 10:00, <arch-general-request(a)lists.archlinux.org> a écrit : > Send Arch-general mailing list submissions to > arch-general(a)lists.archlinux.org > > To subscribe or unsubscribe via email, send a message with subject or > body 'help' to > arch-general-request(a)lists.archlinux.org > > You can reach the person managing the list at > arch-general-owner(a)lists.archlinux.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Arch-general digest..." > > Today's Topics: > > 1. Audio distortion after latest upgrades (David Rosenstrauch) > 2. Re: Audio distortion after latest upgrades (Ralf Mardorf) > 3. Re: Audio distortion after latest upgrades (Giancarlo Razzolini) > 4. Re: Audio distortion after latest upgrades (Ariadna Vigo) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 6 Jul 2023 13:05:42 -0400 > From: David Rosenstrauch <darose(a)darose.net> > Subject: Audio distortion after latest upgrades > To: arch-general <arch-general(a)lists.archlinux.org> > Message-ID: <750a8f2c-6a5f-ade3-6d81-4f109e840a4f(a)darose.net> > Content-Type: text/plain; charset=UTF-8; format=flowed > > I did a system upgrade a few days ago, that I had been delaying for a > few weeks. Probably nearly 300 packages got upgraded, including the > kernel, pipewire, etc. Since then, I keep having a recurrent problem > with audio distortion, which I haven't been able to pin down a cause for. > > To start out, the audio is fine, using my ear bug headphones with my > laptop's audio jack. Then, after a few minutes, suddenly audio > distortion kicks in. It happens when using both streaming music > (audacious) as well as voice (zoom). I seem to be able to "clear it > out" by temporarily turning off my current audio profile in the > pavucontrol app, and then re-enabling it. But the distortion just > returns again after a few minutes. I've tried different headphones, > switching to laptop speakers, etc., but I still get the distortion. > > I haven't been able to figure out which component or configuration > setting is causing it, and haven't seen any currently open bug reports > or any mentions in the Arch forums or here on the mailing list that > describe anything similar. Has anyone else been experiencing anything > like this and/or know what the cause or solution might be? > > My laptop configuration is: > * linux 6.4.1.arch2-1 > * pipewire 1:0.3.72-1 (with pipewire-alsa, pipewire-audio, and > pipewire-pulse also installed) > * wireplumber 0.4.14-1 > * audio hardware: "Tiger Lake-LP Smart Sound Technology Audio > Controller Speaker + Headphones" > * selected audio profile: "Play HiFi quality music" > > Thanks, > > DR > > ------------------------------ > > Message: 2 > Date: Thu, 06 Jul 2023 20:05:08 +0200 > From: Ralf Mardorf <ralf-mardorf(a)riseup.net> > Subject: Re: Audio distortion after latest upgrades > To: arch-general(a)lists.archlinux.org > Message-ID: > <3682224c7af2d3c633e690c125095483551395d2.camel(a)riseup.net> > Content-Type: text/plain; charset="UTF-8" > > On Thu, 2023-07-06 at 13:05 -0400, David Rosenstrauch wrote: > > zoom > > Hi, > > I can't comment on {aur,chaotic-aur}/zoom. At the peak of the pandemic, > I took part in some training courses, some of which were conducted via > Zoom. I didn't do this with my Arch Linux PC, but with an iPad Pro. At > first I refused to install the app and tried Zoom from different web > browsers. This was a total disaster when it came to audio. I ended up > using the app and although it worked better, it was still no fun in > terms of audio. It wasn't ok with the iPad's internal audio thingy, let > alone a Focusrite Scarlett 18i20 2nd generation. This was without > streaming music at the same time. It made my hair stand on end when I > read Zoom related to audio issues. > > If you use Zoom by a web browser, try whatever is provided by the AUR or > the chaotic-aur repository. > > Regards, > Ralf > > ------------------------------ > > Message: 3 > Date: Thu, 06 Jul 2023 16:09:54 -0300 > From: Giancarlo Razzolini <grazzolini(a)archlinux.org> > Subject: Re: Audio distortion after latest upgrades > To: arch-general <arch-general(a)lists.archlinux.org>, David > Rosenstrauch <darose(a)darose.net> > Message-ID: <1688670426.d0nk8am8vj.astroid(a)arch.razzolini.com.br.none> > Content-Type: multipart/signed; protocol="application/pgp-signature"; > micalg=pgp-sha256; boundary="=-BEsA352LeTo8ylstKsDd" > > Excerpts from David Rosenstrauch's message of julho 6, 2023 2:05 pm: > > I did a system upgrade a few days ago, that I had been delaying for a > > few weeks. Probably nearly 300 packages got upgraded, including the > > kernel, pipewire, etc. Since then, I keep having a recurrent problem > > with audio distortion, which I haven't been able to pin down a cause for. > > > > You can try to use the Arch Linux Archive to pinpoint around when this > started > happening, which might help you narrow it down. > > > To start out, the audio is fine, using my ear bug headphones with my > > laptop's audio jack. Then, after a few minutes, suddenly audio > > distortion kicks in. It happens when using both streaming music > > (audacious) as well as voice (zoom). I seem to be able to "clear it > > out" by temporarily turning off my current audio profile in the > > pavucontrol app, and then re-enabling it. But the distortion just > > returns again after a few minutes. I've tried different headphones, > > switching to laptop speakers, etc., but I still get the distortion. > > > > By turning off I assume you use pavucontrol to set it to off. > > > I haven't been able to figure out which component or configuration > > setting is causing it, and haven't seen any currently open bug reports > > or any mentions in the Arch forums or here on the mailing list that > > describe anything similar. Has anyone else been experiencing anything > > like this and/or know what the cause or solution might be? > > > > My laptop configuration is: > > * linux 6.4.1.arch2-1 > > * pipewire 1:0.3.72-1 (with pipewire-alsa, pipewire-audio, and > > pipewire-pulse also installed) > > * wireplumber 0.4.14-1 > > * audio hardware: "Tiger Lake-LP Smart Sound Technology Audio > > Controller Speaker + Headphones" > > * selected audio profile: "Play HiFi quality music" > > > > Try using the pro audio profile. Also, make sure you don't have any > pipewire/wireplumber configuration that could be causing issues. > > Regards, > Giancarlo Razzolini >

1 0

Audio distortion after latest upgrades
by David Rosenstrauch 07 Jul '23

07 Jul '23

I did a system upgrade a few days ago, that I had been delaying for a few weeks. Probably nearly 300 packages got upgraded, including the kernel, pipewire, etc. Since then, I keep having a recurrent problem with audio distortion, which I haven't been able to pin down a cause for. To start out, the audio is fine, using my ear bug headphones with my laptop's audio jack. Then, after a few minutes, suddenly audio distortion kicks in. It happens when using both streaming music (audacious) as well as voice (zoom). I seem to be able to "clear it out" by temporarily turning off my current audio profile in the pavucontrol app, and then re-enabling it. But the distortion just returns again after a few minutes. I've tried different headphones, switching to laptop speakers, etc., but I still get the distortion. I haven't been able to figure out which component or configuration setting is causing it, and haven't seen any currently open bug reports or any mentions in the Arch forums or here on the mailing list that describe anything similar. Has anyone else been experiencing anything like this and/or know what the cause or solution might be? My laptop configuration is: * linux 6.4.1.arch2-1 * pipewire 1:0.3.72-1 (with pipewire-alsa, pipewire-audio, and pipewire-pulse also installed) * wireplumber 0.4.14-1 * audio hardware: "Tiger Lake-LP Smart Sound Technology Audio Controller Speaker + Headphones" * selected audio profile: "Play HiFi quality music" Thanks, DR

4 3

Weird Bluetooth Problem
by Storm Dragon 03 Jul '23

03 Jul '23

Howdy All, My PS4 controller does this weird thing when trying to connect it: [bluetooth]# connect 98:B6:E9:D6:B3:26 Attempting to connect to 98:B6:E9:D6:B3:26 [CHG] Device 98:B6:E9:D6:B3:26 Connected: yes Failed to connect: org.bluez.Error.Failed br-connection-create-socket [CHG] Device 98:B6:E9:D6:B3:26 Connected: no It is an off brand controller, but it gets detected fine. I have also successfully used my Braille Orbit via bluetooth. Another odd behavior is, sometimes it will connect but then after 5 or 10 minutes it will disconnect and when I try to reconnect it does the same thing as above. I looked at the troubleshooting section of the wiki on bluetooth, but there doesn't seem to be anything there that is applicable to my problem, unless I missed something of course. Thanks, Storm -- ⛈🐲 Follow me on Pleroma: https://social.wolfe.casa/storm Get my public PGP key: gpg --recv-key 43DDC193

2 1

nginx http3/quic support
by Genes Lists 29 Jun '23

29 Jun '23

Nginx mainline added (experimental) http3/quic support with version 1.25 in late May. Is there any interest in adding support to our nginx-mainline package? It can be optionally turned on in server config, so having it compiled in and available shouldn't have any impact until it's activated by changing the web server configs. I confirmed this with my web servers. I've been running this for a while now (even before the quic branch was merged into mainline) and it has been working well both with and without http3. Since quic uses udp, I did need to change the firewall to allow udp in addition to tcp for the web servers on port 443. In case of interest, here's what I did to build and get it running. Since openssl doesn't support quic, nginx provides for some alternatives; quictls, boringssl or libressl. I chose to use quictls. Since quictls is openssl plus quic support, I want to be sure it did not interfere in any way with the default Arch openssl libraries or binaries. So, I made a quictls package which installed into it's own tree not in /usr or /usr/local. I chose to use /usr/local/quictls/. This keeps the binaries in and libraries away from all normal paths while making the libraries readily available for nginx. I imagine there are other approaches to dealing with this. Once quictls was built and installed it is quite simple to use it to add quic support to the nginx-mainline package. As always, thanks to those keeping Arch vibrant and at the leading edge. gene

2 4

Monitor control issues after update
by Vasile Vilvoiu 27 Jun '23

27 Jun '23

Hello, So far I've relied on ddcutil to switch between two sources connected to my monitor (desktop PC over HDMI and laptop over USB-C). Unfortunately after today's update of the HDMI connected PC I can no longer do so on it as it returns the following error: $ sudo ddcutil setvcp 60 0x1b Display not found I tired building various versions of ddcutil, going back to 1.3.0, and each of them yields the same error, which makes me believe something changed in the way i2c communication is handled. Unfortunately I know nothing about i2c in Linux. These are the currently detected i2c devices: i2c-0 i2c NVIDIA GPU I2C adapter I2C adapter i2c-1 smbus SMBus I801 adapter at efa0 SMBus adapter i2c-2 i2c NVIDIA i2c adapter 1 at 1:00.0 I2C adapter i2c-3 i2c NVIDIA i2c adapter 2 at 1:00.0 I2C adapter i2c-4 i2c NVIDIA i2c adapter 3 at 1:00.0 I2C adapter i2c-5 i2c NVIDIA i2c adapter 5 at 1:00.0 I2C adapter i2c-6 i2c NVIDIA i2c adapter 6 at 1:00.0 I2C adapter I'd appreciate any help or hints that would point me in the right direction. Where should I be looking? What should I be looking for? -- Best regards, Vasile Vilvoiu

2 1

Scanner does not work in Arch Linux but works in Ubuntu VM
by Björn Försterling 18 Jun '23

18 Jun '23

Hello, I have a question about my "HP Deskjet F2280" printer/scanner. I could not get it working in Arch Linux with "sane" or "simple-scan". It is visible in a "lsusb" command and found by a "sudo sane-find-scanner" as a possible usb scanner. But it is not found in a "sudo scanimage -L" command. And "simple-scanner" or "xsane" cant find the sanner either. But when I fire up my Ubuntu 22.04 qemu VM and use the sanner through "usb-host-device" the sanner works out of the box just by installing "simple-scan". What is the key difference here? The checkbox "proprietary drivers for devices" is enabled in Ubuntu. Is the reason the custom kernel, that Ubuntu uses or kernel modules that could be also added to Arch Linux? Regards Björn

4 4