- Arch-general - lists.archlinux.org

[arch-general] Problems with openvpn
by Iru Cai 01 Aug '14

01 Aug '14

Hi, I just found out my openvpn doesn't work normally. When I run `sudo openvpn --config client.ovpn', openvpn has the following output: ``` Fri Aug 1 21:36:34 2014 TUN/TAP device tun0 opened Fri Aug 1 21:36:34 2014 TUN/TAP TX queue length set to 100 Fri Aug 1 21:36:34 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Fri Aug 1 21:36:34 2014 /usr/bin/ip link set dev tun0 up mtu 1500 Fri Aug 1 21:36:34 2014 /usr/bin/ip addr add dev tun0 local 10.0.3.22 peer 10.0.3.21 Fri Aug 1 21:36:34 2014 ROUTE remote_host protocol differs from tunneled Fri Aug 1 21:36:34 2014 /usr/bin/ip route add 0.0.0.0/1 via 10.0.3.21 Fri Aug 1 21:36:34 2014 /usr/bin/ip route add 128.0.0.0/1 via 10.0.3.21 Fri Aug 1 21:36:34 2014 /usr/bin/ip route add 10.0.3.0/24 via 10.0.3.21 Fri Aug 1 21:36:34 2014 Initialization Sequence Completed ``` Then I run `ip route', and I cannot see `0.0.0.0/1 via 10.0.3.21' in the list, although I can then add it manually. I did another test. I move /usr/bin/ip to /usr/local/bin/ip, and wrote /usr/bin/ip as ``` #!/bin/sh sleep 1 /usr/local/bin/ip "$@" ``` And this time openvpn can add the route normally. Can someone tell me what's wrong with it? Thanks, Iru

1 0

[arch-general] help, the ibus input candidate list is far away from input window
by 宾 30 Jul '14

30 Jul '14

hi, when I use geany and firefox, the input candidate list is away from input window (not following the cursor, but at the bottom left corner), how can I solve this problem? I use ibus-rime, xfce. any help will be appreciated. thank you please visit this link for screen shot http://pan.baidu.com/s/1dDGgHB7‍

3 3

[arch-general] owncloud: incorrect dependencies in PKGBUILD
by Neitsab 30 Jul '14

30 Jul '14

Hi everybody, Today I was looking at the installation of ownCloud on my home Arch server, and I noticed one of the optional dependencies returned by pacman (php-imagick) couldn't be found in the official repos. Turns out it's in the AUR [1]. Arch packages' owncloud webpage mentions "(virtual)" next to php-imagick and has no hyperlink [2]. Is that expected? Also, after looking at the latest ownCloud official admin manual prerequisites section [3] it seems package dependencies should be overhauled: * php-intl should be moved to optdepends array; * smbclient should be removed from optdepends (required only for specific apps, otherwise php-ldap from [extra] should be added too); * php-apcu and php-xcache should be added to optdepends; * quite probably php-fpm should be included too since it is mentioned in the given example nginx config [4]; * and of course, php-imagick should be removed from optdepends if it isn't expected that AUR packages are mentioned in official repos PKGBUILDs. I had a go at an amended PKGBUILD, please find it below. Tell me if this is better suited as a bug report. Cheers [1] https://aur.archlinux.org/packages/php-imagick [2] https://www.archlinux.org/packages/community/any/owncloud/ [3] http://doc.owncloud.org/server/7.0/admin_manual/installation/installation_s… [4] http://doc.owncloud.org/server/7.0/admin_manual/installation/installation_s… ---------------------------------------------- # $Id$ # Maintainer: Sergej Pupykin <pupykin.s+arch(a)gmail.com> # Maintainer: Antonio Rojas <nqn1976 @ gmail.com> # Based on owncloud-git PKGBUILD by Alexander Ovsyannikov pkgname=owncloud pkgver=7.0.0 pkgrel=2 pkgdesc="A cloud server to store your files centrally on a hardware controlled by you" arch=('any') url="http://owncloud.org/" license=('GPL') depends=('php-gd') optdepends=('php-apache: to use the Apache web server' 'php-fpm: to use the nginx web server' 'php-sqlite: to use the SQLite database backend' 'php-pgsql: to use the PostgreSQL database backend' 'mariadb: to use the MySQL database backend' 'php-intl: to increase language translation performance' 'php-mcrypt: to increase file encryption performance' 'php-acpu: to enhance performance' 'php-xcache: to enhance performance' 'ffmpeg: file preview' 'libreoffice-common: file preview') makedepends=() options=('!strip') backup=('etc/webapps/owncloud/apache.example.conf') source=("http://download.owncloud.org/community/$pkgname-${pkgver}.tar.bz2"{,.asc} 'apache.example.conf') md5sums=('28cfdc99e8ee9350fe88430b4c7d62f2' 'SKIP' '64c6edf88bcbb37d063e4bf77b39237f') package() { # install license install -d ${pkgdir}/usr/share/licenses/${pkgname} cp ${srcdir}/${pkgname}/COPYING-* ${pkgdir}/usr/share/licenses/${pkgname} # install project install -d ${pkgdir}/usr/share/webapps/ cp -a ${srcdir}/${pkgname} ${pkgdir}/usr/share/webapps/ # install apache config file install -d ${pkgdir}/etc/webapps/${pkgname} install -m 644 ${srcdir}/apache.example.conf ${pkgdir}/etc/webapps/${pkgname} # move config to /etc mv ${pkgdir}/usr/share/webapps/owncloud/config ${pkgdir}/etc/webapps/${pkgname}/config chown -R http:http ${pkgdir}/etc/webapps/${pkgname}/config ln -s /etc/webapps/${pkgname}/config ${pkgdir}/usr/share/webapps/owncloud/config }

3 3

[arch-general] Ncurses over ssh
by luc.linux＠mailoo.org 30 Jul '14

30 Jul '14

Hello everyone. I am using newsbeuter to handle my rss feeds, and, to be able to use it from all my computers, I set it up on a server with ssh enabled. When I log in this server with ssh, then launch newsbeuter, everything works fine. But when I invoke it that way : `ssh [ip] newsbeuter`, newsbeuter fails with 'Error opening terminal : unknown'. When I explicitly export $TERM[1], newsbeuter is able to launch, but it doesn't detect the terminal size and can't handle keys. So I'll be glad if you know how to fix that matter. Thanks in advance. In a totally unrelated matter, do you know how to make a remote program launch local scripts through ssh ? [1] : The command used is : `ssh [ip] 'export TERM=rxvt-unicode-256color && newsbeuter'`

4 10

[arch-general] mysql-workbench: result grid
by Mihamina Rakotomandimby 30 Jul '14

30 Jul '14

Hi all, Using AUR mysql-workbench, I dont have the result grid. If I go to the "form editor", I see the results can be edited. It means then that tha data are present but the grid is not showed. Have you the same problem? Just for the record, I buit with yaourt but also tried with manual makepkg. Thanks for your help. Note: I'm currently installing mysql-workbench-gpl and the result grid doesnt show either...

1 0

[arch-general] [draft] xorg-server 1.16 is now available (v2)
by Karol Blazewicz 29 Jul '14

29 Jul '14

https://mailman.archlinux.org/pipermail/arch-dev-public/2014-July/026496.ht… The draft still doesn't say how can I launch more than one rootless X server at a time or if it's possible at all. Do I have to have KMS enabled? What if I'm using e.g. proprietary nvidia drivers i.e. no KMS?

4 4

[arch-general] [vte3] Wrong permissions for /etc/profile.d/vte.sh ?
by Neitsab 29 Jul '14

29 Jul '14

Hi, As I was checking some stuff about environment variables, I noticed that I have one file in /etc/profile.d which doesn't have the same perms as the others: $ ls -la /etc/profile.d/ total 72 drwxr-xr-x 2 root root 4096 19 juil. 20:36 . drwxr-xr-x 91 root root 4096 22 juil. 15:04 .. -rwxr-xr-x 1 root root 102 24 oct. 2013 gpm.sh -rwxr-xr-x 1 root root 2154 21 mars 02:16 infinality-settings.sh -rwxr-xr-x 1 root root 1972 7 janv. 2014 infinality-settings.sh.old -rwxr-xr-x 1 root root 140 28 mars 15:29 jre.csh -rwxr-xr-x 1 root root 152 28 mars 15:29 jre.sh -rwxr-xr-x 1 root root 156 15 mars 22:09 libreoffice-common.csh -rwxr-xr-x 1 root root 156 15 mars 22:09 libreoffice-common.sh -rwxr-xr-x 1 root root 1052 4 juil. 14:44 locale.sh -rwxr-xr-x 1 root root 50 1 juil. 11:55 mozilla-common.csh -rwxr-xr-x 1 root root 50 1 juil. 11:55 mozilla-common.sh -rwxr-xr-x 1 root root 699 19 juin 21:08 perlbin.csh -rwxr-xr-x 1 root root 668 19 juin 21:08 perlbin.sh -rwxr-xr-x 1 root root 115 13 mai 23:37 seahorse-ssh-askpass.sh -rwxr-xr-x 1 root root 36 20 janv. 2014 vdpau_vaapi.sh -rw-r--r-- 1 root root 1881 23 juin 22:05 vte.sh -rwxr-xr-x 1 root root 115 11 juin 2013 x11-ssh-askpass.sh $ pacman -Qo /etc/profile.d/vte.sh /etc/profile.d/vte.sh belongs to vte3 0.36.3-1 I verified it wasn't some bad commands on my side which changed this file's perms by reinstalling it together with vte-common, however the file remains 644. Does anybody have any hints about why this file, which is a .sh script, doesn't have execute permissions like the others in /etc/profile.d folder? I didn't find any change in latest PKGBUILDs which would cause such permissions, so should I suppose it is an upstream decision? Regards

2 2

[arch-general] Recording an online TV broadcast?
by Csányi Pál 28 Jul '14

28 Jul '14

Hi, is such an application that can record an online TV broadcast? -- Regards from Pal

4 5

[arch-general] Few questions/issues with linux-grsec
by Divan Santana 28 Jul '14

28 Jul '14

Greetings Archers :) Been trying out linux-grsec kernel and overall pretty pleased with it. Just have 2 issues with it and wondering how best to resolve them: 1) virtualbox modules for grsec has following issue dkms install vboxhost/$(pacman -Q virtualbox|awk {'print $2'}|sed 's/\-.\+//') -k $(uname -rm|sed 's/\ /\//') DKMS make.log for vboxhost-4.3.14 for kernel 3.15.5.201407170639-2-grsec (x86_64) Thu Jul 24 07:53:40 SAST 2014 make: Entering directory '/usr/lib/modules/3.15.5.201407170639-2-grsec/build' LD /var/lib/dkms/vboxhost/4.3.14/build/built-in.o LD /var/lib/dkms/vboxhost/4.3.14/build/vboxdrv/built-in.o CC [M] /var/lib/dkms/vboxhost/4.3.14/build/vboxdrv/linux/SUPDrv-linux.o cc1: error: incompatible gcc/plugin versions cc1: error: fail to initialize plugin /usr/lib/modules/3.15.5.201407170639-2-grsec/build/tools/gcc/size_overflow_plugin/size_overflow_plugin.so cc1: error: incompatible gcc/plugin versions cc1: error: fail to initialize plugin /usr/lib/modules/3.15.5.201407170639-2-grsec/build/tools/gcc/stackleak_plugin.so cc1: error: incompatible gcc/plugin versions cc1: error: fail to initialize plugin /usr/lib/modules/3.15.5.201407170639-2-grsec/build/tools/gcc/colorize_plugin.so cc1: error: incompatible gcc/plugin versions cc1: error: fail to initialize plugin /usr/lib/modules/3.15.5.201407170639-2-grsec/build/tools/gcc/structleak_plugin.so scripts/Makefile.build:318: recipe for target '/var/lib/dkms/vboxhost/4.3.14/build/vboxdrv/linux/SUPDrv-linux.o' failed make[2]: *** [/var/lib/dkms/vboxhost/4.3.14/build/vboxdrv/linux/SUPDrv-linux.o] Error 1 scripts/Makefile.build:465: recipe for target '/var/lib/dkms/vboxhost/4.3.14/build/vboxdrv' failed make[1]: *** [/var/lib/dkms/vboxhost/4.3.14/build/vboxdrv] Error 2 Makefile:1388: recipe for target '_module_/var/lib/dkms/vboxhost/4.3.14/build' failed make: *** [_module_/var/lib/dkms/vboxhost/4.3.14/build] Error 2 make: Leaving directory '/usr/lib/modules/3.15.5.201407170639-2-grsec/build' 2) How best to get a tun.ko module for linux-grsec? Seems not to be included in the kernel. -- Divan Santana

1 0

[arch-general] [draft] xorg-server 1.16 is now available
by Karol Blazewicz 27 Jul '14

27 Jul '14

I can start only one rootless X session at a time. If I want to start a second one while the first one is running, I have to use 'sudo startx'. I'm logging into tty and starting X as a user. Did I mis-configure something or is it a "feature'? Can you start multiple X sessions simultaneously with xorg 1.16?

3 6